Error in Business Content Installation

Hi Guru's,
I am trying to install the Business Content object InfoCube    0FIAA_C04 where the steps i followed are:
goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
After this i am getting list of error message at the bottom in RED as follows:
Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
and so on for other objects also related to 3.x
please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
if you have any document on this pls forward it to skd1982 gmail
Thanks,
Sujeet

Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
Goodluck.

Similar Messages

  • Error during Business Content Installation of a query

    Hi,
    I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
    Any help on the above problem would be appreciated.
    Thanks & Regards,
    Raj

    Hi Raj,
    <i>Is the request creation for a BEx transport is different from the normal request creation??</i>
    Yes, Handling of changes to already transported Queries is different to other things of BW.
    Refer :
    http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    Re: Not able to Change or delete Query
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma

  • Different Problems during Business Content Installation in BI 7.0

    HI GURUs,
              I'm working on BI 7.0. Here I'm trying to do business content installation and facing the following problems.
    Question 1:
              Let's say when I'm trying to install 0MATERIAL infoobject
    Scenario 1:
    ( with Necessary Objects as Grouping),  the job is finishing succesfully, but when I look for 0MATERIAL in Infoobjects of Modelling it is found in Unassigned characteristics Node where as it should have been in 0MMIC_CHA01 Catalog & secondly it's not in Active state. When I tried to manually activate it I'm getting the error stated in Fig 1b of attachment.
    When I tried for Object Maintanance of 0MATERIAL in Business Content Screen i'm getting the same error (Fig 1a & 1b).
    Scenario 2:
      (_with Dataflow before and afterwards as Grouping_). In this scenario i'm getting the issue shown in fig 2. I would like to understand why this issue is popping up, specially the source system issue.
    Note:  The Figures are found in the file attached with this link.........
               [Bi Content INstallation Error Doc|http://rapidshare.com/files/269891244/BI_Content_Installation_Errors.doc.html]
    Question 2:
             Why are many of the infoobjects like 0Customer, 0Material etc getting assigned to Unassigned Characteristics instead of getting assigned to their respective Characteristic catalogs.
    Note:  It would be much more helpful if the solution is provided with reference to SAP Note, though alternate solution is always welcome.
           Hoping for a early optimistic solution.
    Regards,
    Syed Shujaath Ali.

    Hi,
    Maintain the material number length in your BW system, tcode- OMSL. Due to this you are getting error, conversion settings are not found for 0material. Check in your source system, what is the material number length has mantained by functional team.
    It will sove your issue.

  • Error In Business Content

    Hi,
         I am getting Errors in business content when Installing objects for Infocube. like
    Object '0DBMKTC01' (CUBE) of type 'InfoCube' is not available in version 'D'
    Object '0DB_MC01' (MPRO) of type 'MultiProvider' is not available in version 'D'
    Object '0DB_VCDS1' (ODSO) of type 'DataStore Object' is not available in version 'D'
    etc.......
       Please help me
    Regds
    Dave.

    Hi,
    Apply note :1009329
    Re: Error while activating Infocubes (0SD_C03) from Business Content
    Re: Info Objects & Data source not active.
    With rgds,
    Anil Kumar Sharma .P

  • Business content installation query

    Hi Experts ,
    i am installing PM Business content installation , while installing 0PM_C03 there is an infoobject 0EQUIPMENT which is existing in present system but of old version   and mst of the attributes are time independent
    now  i  want to install   business content in such away that current 0EQUIPMENT  should not be disturbed  and business content version has attributes that are time dependant
    Question is shall i install 0EQUIPMENT  or not,  and let the old version remain , as 0EQUIPMENT  is under use at few places
    secondly if i dont install in future will there be any problem in loading PM data .
    Please Advise,
    Thanks in Advance,
    Nitya

    HI,
    hi,
    use the option Match (X) or copy.
    The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
    The active version is overwritten with the delivery version if:
    ¡        The match indicator is not set, and
    ¡        The install indicator is set.
    In other words, the delivery version is copied to the active version.
    Note
    If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
    For more info search in forums or check the sap help.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    Regards
    KP

  • Business Content Installation with Remote Activation

    Hi
       During Business Content Installation, BI system attempts to do Remote Activation in the Source System
      But in my case, it's searching for the datasources in the ERP source system instead of the CRM system
      How do I get the Business Content to look into the right CRM system
      Also, do I have to manually build the transfer rules of InfoSource to DataSource ? At the moment, I don`t have InfoSource automatically mapped to DataSource

    Hi, before collecting the datasource to the right you have to select the source system by one of the following ways:
    1) press Shift F7
    2) click on the source system icon on top
    3) goto menu Edit->Source system assignment
    About your secod question check if the BI content already has a mapping defined if not you have to manually create the mapping.
    Best Regards,
    Brindha.

  • PM business content installation

    Hi Experts,
    i have to start on Plant Maintanance Business content installation , Could any one provide me the data flow , what are tha data sources, first do i have to activate daatsource and replicate then activate cubes  etc .
    Also could any one provide me details about PM and QM Integration
    Thanks In Advance
    Nitya

    HI ,
    You can find the BI content delivered objects for PM in the below link
    http://help.sap.com/saphelp_bw33/helpdata/en/b0/e3163d5abd752de10000000a114084/frameset.htm
    Regards,
    Sathya

  • Re: Business Content Installation

    Hi,
    I intalled cube with as usaual procedure but i can't see in workbench(RSA1). Can i know what is the problem? this is very important for me.
    Thanks,
    RK

    Hi RK,
    Check that Business content installation job has finished or not in SM37(job overview).
    Once it completed, in RSA1> InfoProvider>InfoArea first Refresh your tree and click FIND to type your infocube name and search it.
    you can get it surely.
    NOTE: Assign points if it helps
    Regards,
    Arun.M.D

  • Business Content installation error in Solman

    Hi All,
    While installing Business Content for the transactional data source "0CRM_SRV_PROCESS_H" in the Solman, I came accross the following error-
    "IC=0CRM_PRI IS=80CRM_CNFI error when checking the update rules"
    Can any one help me regarding this BC installation issue?
    Edited by: S Baruah on Sep 3, 2009 12:12 PM
    Edited by: S Baruah on Sep 3, 2009 12:14 PM

    See the error log for the same...there will be procedure to correct the same...just follow that...
    Also see if IC=0CRM_PRI IS=80CRM_CNFI are active.

  • Error message in Business Content Installation

    Dear All,
    I am getting one error message while install some objects in FI through Business Content.
    Object '0GL_ACCOUNT_T011_HIER_EC1' (ISTS) of type 'Transfer structure' is not available in version 'A
    I have search around but I dont find any related to it.
    Please suggest.
    Thanks

    Hi,
    Exactly what your trying to activate?
    info object or data source?
    Use grouping option as - only necessary object and drag required object form middle pane to right side pane.
    try to install it. If it shows any dependences then those first need to install.
    above mentioned name is GL Account master data source hierarchy.
    Thanks

  • Business content installation error

    Hi,
    I got an error when installing the  Business content ODS (0OPA_O08).
    IC=0PROD_CATEG IS=0PROD_CATEG_ATTR syntax error: rows 0
    Message no. RSAU466
    Diagnosis
    When generating the update program for data target 0PROD_CATEG, InfoSource 0PROD_CATEG_ATTR, a syntax error occured in row 0.
    thanks
    kamal

    kamal,
    please give business content collection mode , grouping , foreground / background etc...
    , your SP level , Business content version etc....
    also are there any short dumps for the same in ST22 ?
    Is this error repeatable ? or one off ?
    Arun
    Message was edited by:
            Arun Varadarajan

  • BI Business Content Installation error

    Hi Experts,
    Patch Level
    BW              - SAPKW70012
    BI CONTNET - SAPKIBIIP4
    When I installing the business content, we are getting the following short dump error:
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Date and Time          29.03.2007 05:12:02
    Short text                                                                                |
    Access via 'NULL' object reference not possible.                                              |
    What happened?
    Error in the ABAP Application Program                                                         |
    The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be                         |
         terminated because it has                                                                    |
    come across a statement that unfortunately cannot be executed.
    Please let me know the solution for this error.
    Advanced Thanks,
    Chandra

    I faced the same problem....is a Basis problem son support packages not installed....consult your basis support....is not a BW problem

  • Business Content Installation Errors

    Hi All,
    I need to Install SD cube : 0SD_C03 through Business content. Before doing this, In ECC I have activated the relevant SD datasource : 2LIS_11_VADHR in RSA5 and then activated the same datasource in LBWE also. Then deleted the setup tables in LBWG. Coming to BI , I have replicated the datasource .
    In Business content tab , I have set Grouping Option as Only necessary Objects , and Collection Mode as automatically and selected the Cube : 0SD_C03 through Object Type in Business Content tab. Clicked on INSTALL option . I am getting many errors like :
    Activation of Objects with Type InfoObject
    Checking InfoObject 0MATERIAL
    Attribute 0RT_SEAROLL from characteristic 0MATERIAL not (actively) available
    Hierarchy characteristic 0CM_CDT1 of characteristic 0MATERIAL is not active
    Like this I am getting 0VENDOR,0PLANT , 0CM_CTAR, 0CM_CDT1...infoobjects not actively available. I have tried Installing individual Infoject , still it is failing with same Issues.
    Also I have tried Installing the cube with all the Options in Grouping Objects , Still I am facing the errors.
    Please do the needful
    Regards,
    Mahesh

    Hi Ravikanth,
    I ahve taken all the InfoObjects which were failling and tried Installing with Grouping Option as : Only Necessary Objects . Still I got the same errors .
    My System Version is :
    Software Component : SAP_BW
    Release : 702
    Level : 0009
    Highest Support : SAPKW70209
    Please do the needful.
    Regards,
    Mahesh

  • Short dump in BIW 7.0 business content installation

    Dear Friends,
    I am trying to install business content in BIW 7.0 . In RSA1  ->BI Content --> Object Types > Query Elements> Grouping data flow before ---> Install.
    Once I start this installation process it gives short dump.
    The dump says
    Short text
        Access via 'NULL' object reference not possible.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: " ").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    Can anybody tell me why this dump occures. Am I missing any step in BI installation.
    Regards,
    Mahendra

    Hi ,
    If any one wants to install BIW 3.5 with R/3 4.7 (for extraction) connection in single hard disk, please  call me on 9342820370.
    Installation charge:1000/
    Hard disc req: 160 GB.
    ram: 1 gb
    Thanks,
    Laxman rao.
    9342820370
    #551,26 th main,
    BTM ,Bangalore.

  • Error installing Business Content: InfoObject Catalogs

    hi all,
    just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
    I'm trying to activate:
    InfoObject Catalog (technical name) : 0CHANOTASSIGNED
    InfoObject Catalog(description)        : Unassigned characteristics
    upon installation here is the job log that i got:
    Message text | Message class | Message no. | Message type
    Replication completed successfully | RSAOLTP | 33 | S
    Replication completed successfully | RSAOLTP | 33 | S
    The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
    Assign a package | TR | 709 | S
    Specify the package or flag it as a local object | TR | 742 | E
    Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
    what seems to be the error here?
    thanks and regards,
    karl

    hi chintamanim,
    thanks for the response.
    i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
    does this have an effect on the error i got from activating and receiving the error upon activation?
    The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
    I did follow a document for Building Block Configuration Guide:
    B03: General Settings for BI Integration
    and the step is included here:
    Activating Business Content: InfoObject Catalogs:
    1.     On the Data Warehousing Workbench: Business Content screen:
    a.     At the top of the right hand frame, choose Grouping and select In Data Flow Before.
    b.     At the top of the right hand frame, choose Collection mode and select collect automatically.
    c.     In the left hand frame, select Object Types.
    d.     In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
    2.     In the Selection of Query Objects dialog box.
    a.     Select the following InfoObject catalog:
    0CHANOTASSIGNED
    b.     Choose Transfer Selections.
    c.     If a dialog box Remote Activation in the Source System <…> occurs, choose OK and log on to the source system on the following screen.
    d.     If a dialog box appears Exceeded runtime when collecting objects choose Continue.
    3.     At the top of the right frame, choose Install and select Install in Background.
    4.     In the Install Business Content in the Background dialog box choose Yes.
    5.     In the Information dialog box choose Continue.
    6.     Choose Exit.
    please advise on how to continue.
    thanks and regards

Maybe you are looking for