Error in Business content Query

Hi,
we have activated the business content for General Ledger (New). We have successfully executed all data loads.
but, the standard query 0FIGL_V10_Q0001 which is activated, is not executing properly.
It throws up a message "Value '0' is invalid for property 'Ref. Characteristic' of element 'Balance Sheet Value'" and no data is displayed.
On analysis, we find that, for the calculated key figure Balance sheet value the Ref. characteristic in the Aggregation tab is set as [0]0.
Has anyone faced this issue before. could anyone help us to fix it?
Regards,
Sainath

Hi,
Please apply the note 1015402 to resolve this issue.
Best Regards
Manoj Kumar

Similar Messages

  • Error During Business Content Query Activation- Very Urgent

    Hi All,
    I am trying to install few queries in business cube 0pur_c01, which is already in production and already lot many queries are running.
    As per requirement i have to install  New quries in the 0Pur_C01
    0PUR_C01_Q0012 : Ordering Activities
    0PUR_C01_Q0015 : Purchase Order Values
    0PUR_C01_Q0013 : Vendor Comparison re Purchase Values
    0PUR_C01_Q0004 : Values – Purchase Order – Delivery – Invoice
    0PUR_C01_Q0023 : Total and Average Order Value
    Out of these five quries i am unable to install  0PUR_C01_Q0012 : Ordering Activities and geeting error message during simulate install rest queries has been installed already without any issue once i have unselected the already transported
    element.
    I am doing the same for  query 0PUR_C01_Q0012 : Ordering Activities but getting error message
    Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
    BEx transport request 'SBDK900497' is not available or not suitable
    Regards
    Premanshu Gupta

    Hi,
    To rectify this error,
    <i>BEx transport request 'SBDK900497' is not available or not suitable</i>
    Go to Transport Connection, there click on "BEX" "Create tranport request for BEX", there insert a new row, and create a new request. This is the default request for BEX queries.
    While transporting , dont tranport this request, collect the objects which you want to tranport and create a new request.
    <i>Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB</i>
    For this error, check the object in meta data repository, whether the object is in active version or not.I think this object is not in Active version thats why you are getting this error.
    Assign points if it helps....

  • Error While Installing the Business Content Query

    Dear Friends,
    We are in BI 7.0 and trying to install a business content query "Balance Sheets Profit and Loss Statement" but while activating we are getting the error that some Particular Request has not been found or not suitable. we checked for that request in SE09 and found that there is no such request existing in the system. So what could be the cause of the Error and what to do for successfully Installing the Query.
    Thanks ..
    Anurag

    Are you assigning a new request or  creating a new one? Try to assign to a new request if you are not doing so.
    Thanks
    Wind

  • Error In Business Content

    Hi,
         I am getting Errors in business content when Installing objects for Infocube. like
    Object '0DBMKTC01' (CUBE) of type 'InfoCube' is not available in version 'D'
    Object '0DB_MC01' (MPRO) of type 'MultiProvider' is not available in version 'D'
    Object '0DB_VCDS1' (ODSO) of type 'DataStore Object' is not available in version 'D'
    etc.......
       Please help me
    Regds
    Dave.

    Hi,
    Apply note :1009329
    Re: Error while activating Infocubes (0SD_C03) from Business Content
    Re: Info Objects & Data source not active.
    With rgds,
    Anil Kumar Sharma .P

  • Finding data in a datasource/ Business Content Query

    Hello,
    can you help me with this one -- background to this problem is shown below:
    Question:
    1.
    No data was found in my infocube so I went o R3 to see if the datasource had any data in it by running rsa3 but found no datasource 2LIS_02_S012, although rsa5 shows that it exists. What could be happening?
    2.
    Also, how do I see the queries which come with the InfoCube? When I go into BEx, I see the dimensions to create my own queries, but where are the ones which comes with the Business content for me to use?
    Background to Questions----
    I was experimenting with an MM InfoCube 0PUR_C01, and my research indicated that the datasource which supplies this this infocube with data is 2LIS_02_S012. The notes on this datasource indicates it could be extracted as a standard extraction or LO. I did standard, rsa5, rsa6, etc...replicated in BW, etc.
    I later created and InfoCube zpur_c01 and copied from 0pur_co1, etc. ...then later created and infopackage and loaded data into the InfoCube for the purposes of reporting.

    Hi Caud,
    To answer your first question.
    - The datasource 2lis_02_s012 that you have seen in rsa5 is in the delivered version you need to transfer this into the active version. Select the datasource in rsa5 and click the transfer datasource button. After you have done this you will see the datasource in rsa6.
    Also since this datasource is a Logistics Info Structure the LIS reporting should have been activated and in use.
    For your second question
    - If you have already identified a standard business content query that you want to use through the metadata repository, you can activate the report through the business content tab in rsa1.
    Hope this helps.
    Regards,
    Demetrius

  • Business Content Query

    Hi All,
    I would like to know the importance of Business Content Query, Like:
    1. why they are used?
    2. What is the advantage of Business content query against a customized query for a Business content cube?
    Any help would be appreciated.
    regards
    Praveen

    Hi Samala,
    For each Module we have Business content queries
    for example : SD,MM,PM,PP etc For these we have business content queries.
    We take SD as eaxample: SAP has given business content quries in SD, If the client satisfis with the Business content query, There is no need to create new query. We can use the same query.
    If the client has some new requirement like adding 1 extra field to the business content report, at this time we need to customize the query.
    Advantages of Business content : No need to create new query, Lot of time and manpower save
    Regards,
    Marasa.

  • Error during Business Content Installation of a query

    Hi,
    I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
    Any help on the above problem would be appreciated.
    Thanks & Regards,
    Raj

    Hi Raj,
    <i>Is the request creation for a BEx transport is different from the normal request creation??</i>
    Yes, Handling of changes to already transported Queries is different to other things of BW.
    Refer :
    http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    Re: Not able to Change or delete Query
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma

  • Error installing Business Content: InfoObject Catalogs

    hi all,
    just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
    I'm trying to activate:
    InfoObject Catalog (technical name) : 0CHANOTASSIGNED
    InfoObject Catalog(description)        : Unassigned characteristics
    upon installation here is the job log that i got:
    Message text | Message class | Message no. | Message type
    Replication completed successfully | RSAOLTP | 33 | S
    Replication completed successfully | RSAOLTP | 33 | S
    The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
    Assign a package | TR | 709 | S
    Specify the package or flag it as a local object | TR | 742 | E
    Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
    what seems to be the error here?
    thanks and regards,
    karl

    hi chintamanim,
    thanks for the response.
    i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
    does this have an effect on the error i got from activating and receiving the error upon activation?
    The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
    I did follow a document for Building Block Configuration Guide:
    B03: General Settings for BI Integration
    and the step is included here:
    Activating Business Content: InfoObject Catalogs:
    1.     On the Data Warehousing Workbench: Business Content screen:
    a.     At the top of the right hand frame, choose Grouping and select In Data Flow Before.
    b.     At the top of the right hand frame, choose Collection mode and select collect automatically.
    c.     In the left hand frame, select Object Types.
    d.     In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
    2.     In the Selection of Query Objects dialog box.
    a.     Select the following InfoObject catalog:
    0CHANOTASSIGNED
    b.     Choose Transfer Selections.
    c.     If a dialog box Remote Activation in the Source System <…> occurs, choose OK and log on to the source system on the following screen.
    d.     If a dialog box appears Exceeded runtime when collecting objects choose Continue.
    3.     At the top of the right frame, choose Install and select Install in Background.
    4.     In the Install Business Content in the Background dialog box choose Yes.
    5.     In the Information dialog box choose Continue.
    6.     Choose Exit.
    please advise on how to continue.
    thanks and regards

  • Error in Business Content Installation

    Hi Guru's,
    I am trying to install the Business Content object InfoCube    0FIAA_C04 where the steps i followed are:
    goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
    After this i am getting list of error message at the bottom in RED as follows:
    Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
    Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
    and so on for other objects also related to 3.x
    please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
    if you have any document on this pls forward it to skd1982 gmail
    Thanks,
    Sujeet

    Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
    Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
    Goodluck.

  • Business Content query cant able to see in Bex.

    Hi BW Experts,
    I have installed the query 0PS_C04_Q1000 from the business Content.After installing, I couldn’t find the query in Bex analyzer. But in the business Content the query is showing that it is already installed.
    Can u pls help on this issue.
    Thanks,
    Jelina.

    RRMX->Open Queries->do a search giving the query name 0PS_C04_Q1000 in Description/Technical Name area and click ok. If it is installed properly, you should find it here.
    Also check table RSRREPDIR  if you can see it. If not, re-install the query from BI content again and try.
    Hope this helps..

  • Error installing business content update rules

    Hi,
    I'm trying to install the below updates rules from the business content
    0PLANT$T 0PLANT_TEXT      53AFFWD74OI3CT3RDE3RI9THU
    0PLANT 0PLANT_ATTR         5UZVD7UWYN4T81H24YBKGH6KY
    I get the error
    IC=0PLANT$T IS=0PLANT_TEXT syntax error:  rows 0
    Long Text:
    IC=0PLANT$T IS=0PLANT_TEXT syntax error:  rows 0
    Message no. RSAU466
    Diagnosis
    When generating the update program for InfoProvider 0PLANT$T, InfoSource 0PLANT_TEXT, a syntax error in line 0.
    System Response
    The update rules cannot be activated.
    Procedure
    If error message :
    is cut off, proceed as follows to get the complete complete error message:
    Go into update rule maintenance, choose Extras -> Display Activated Program and perform a syntax check. This allows you to find out what the error is.
    If I select the Display Activated Program it says does not exist.
    Can anyone help me figure out this issue?
    Thanks

    We are currently on SAP EHP 1 for SAP NetWeaver 7.0
    SAP_BW Release 701 Support Package SAPKW70107
    BI_CONT Release 705 Support Package SAPK-70501INBICONT

  • Error Installing Business Content InfoObject 0GN_VENDOR

    Hi,
         I installed 0GN_VENDOR from Business Content.  It was not active after installing. 
    When I try to activate 0GN_VENDOR I receive the following error messages:
    Attribute 0DBCTRYCOD from characteristic 0GN_VENDOR not (actively) available
    Attribute 0DBGUDUNS from characteristic 0GN_VENDOR not (actively) available
    I looked in Business Content and found that the the two attributes do not exist in Business Content.  So I am unable to install to correct the 0GN_VENDOR issue.   I also do not find any related OSS Notes on the Attributes.
    What should I do to fix this?  Just remove the offending Attributes and activate 0GN_VENDOR?

    Hi Kenneth,
    Check for the inactive info objects 0DBCTRYCOD and 0DBGUDUNS and try to install these IOs too along with the 0GN_VENDOR.
    If you are not able to find them in Business content then it might the problem with the BI content version installed in your system.
    Regards
    KP

  • Error installing business content

    Hi Experts,
    i am getting an error while installing business content for sales and distribution.
    i.e-The creation of the export DataSource failed,
    The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
    could any body help.

    Hi
    The DS should be Activated at R/3 to Install the Business Content on BI side.
    Recheck the same with the following
    R/3
    RSA5--Activate the Data Source -- (RSA6 -- Transport the Data Source -- required if you want to replicate on BI Side)
    BI Side
    Business Content -- Install the same with required grouping conditions (Only necessary objects would be best option)
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5c13db90-0201-0010-e59d-bdd1c7b3f8c5
    http://help.sap.com/saphelp_nw04s/helpdata/en/5e/e88afcfc724d9d865793da9693dce6/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d8/8f5738f988d439e10000009b38f842/frameset.htm
    Hope it helps and clear

  • Error When inserting Content Query Web part onto the page

    i am using share point 2010 and when i am trying to insert content query web part onto the page i am getting the following error
    i checked the correlation id in the logs file but could not find anything useful in it.
    please suggest why this problem occuring everytime when i try to insert content query webpart onto the page

    Hi,
    Check the correlation id in your logging files are the best way to investigate.
    Did you check these files with "SharePoint ULS Log viewer". Maybe, that will be more easy for you to get the correlation Id.
    Moreover, check the account's permissions with which you try to insert your webpart.
    Regards.
    Gilles Martinez
    Twitter
    Blog
    Please mark as helpful/answer if this resolved your post

  • Unarchive ERROR- Customer [Business content]

    Hi All,
    I am trying to unarchive MDM Customer business content MDM 7.1 , am getting the following error:
    ' Archive has too many languages (18) for DBMS Platform limit of (17) for target repository : Customer"
    $$$ xoperation ended in ERROR : ffab414fh : Error adding a language . You may have exceeded the maximum number allowed".
    1. Is there any DBMS Platform limitations for adding languages?
    please advise.
    thanks,
    Alexander.

    Hi Alexander,
    It seems like you are using IBM DB2 database.
    In order to fix it, Please Check SAP Note: 1143932
    Fixed: Language limitation on DB2 databases. Set parameter "IBMDB2 Use Long Varchar For Languages=True" in mds.ini file to activate the fix.
    Also refer Similar thread with same issue:
    Re: Remove languages for SRM-MDM Repository for archival
    Regards,
    Mandeep Saini

Maybe you are looking for