Error In Business Content

Hi,
I am getting Errors in business content when Installing objects for Infocube. like
Object '0DBMKTC01' (CUBE) of type 'InfoCube' is not available in version 'D'
Object '0DB_MC01' (MPRO) of type 'MultiProvider' is not available in version 'D'
Object '0DB_VCDS1' (ODSO) of type 'DataStore Object' is not available in version 'D'
etc.......
Please help me
Regds
Dave.

Hi,
Apply note :1009329
Re: Error while activating Infocubes (0SD_C03) from Business Content
Re: Info Objects & Data source not active.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Error in Business Content Installation

Hi Guru's,
I am trying to install the Business Content object InfoCube 0FIAA_C04 where the steps i followed are:
goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
After this i am getting list of error message at the bottom in RED as follows:
Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
and so on for other objects also related to 3.x
please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
if you have any document on this pls forward it to skd1982 gmail
Thanks,
Sujeet

Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
Goodluck.

Error installing business content update rules

Hi,
I'm trying to install the below updates rules from the business content
0PLANT$T 0PLANT_TEXT 53AFFWD74OI3CT3RDE3RI9THU
0PLANT 0PLANT_ATTR 5UZVD7UWYN4T81H24YBKGH6KY
I get the error
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Long Text:
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Message no. RSAU466
Diagnosis
When generating the update program for InfoProvider 0PLANT$T, InfoSource 0PLANT_TEXT, a syntax error in line 0.
System Response
The update rules cannot be activated.
Procedure
If error message :
is cut off, proceed as follows to get the complete complete error message:
Go into update rule maintenance, choose Extras -> Display Activated Program and perform a syntax check. This allows you to find out what the error is.
If I select the Display Activated Program it says does not exist.
Can anyone help me figure out this issue?
Thanks

We are currently on SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW Release 701 Support Package SAPKW70107
BI_CONT Release 705 Support Package SAPK-70501INBICONT

Error during Business Content Installation of a query

Hi,
I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
Any help on the above problem would be appreciated.
Thanks & Regards,
Raj

Hi Raj,
Is the request creation for a BEx transport is different from the normal request creation??
Yes, Handling of changes to already transported Queries is different to other things of BW.
Refer :
http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Re: Not able to Change or delete Query
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Error installing Business Content: InfoObject Catalogs

hi all,
just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
I'm trying to activate:
InfoObject Catalog (technical name) : 0CHANOTASSIGNED
InfoObject Catalog(description) : Unassigned characteristics
upon installation here is the job log that i got:
Message text | Message class | Message no. | Message type
Replication completed successfully | RSAOLTP | 33 | S
Replication completed successfully | RSAOLTP | 33 | S
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
Assign a package | TR | 709 | S
Specify the package or flag it as a local object | TR | 742 | E
Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
what seems to be the error here?
thanks and regards,
karl

hi chintamanim,
thanks for the response.
i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
does this have an effect on the error i got from activating and receiving the error upon activation?
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
I did follow a document for Building Block Configuration Guide:
B03: General Settings for BI Integration
and the step is included here:
Activating Business Content: InfoObject Catalogs:
1. On the Data Warehousing Workbench: Business Content screen:
a. At the top of the right hand frame, choose Grouping and select In Data Flow Before.
b. At the top of the right hand frame, choose Collection mode and select collect automatically.
c. In the left hand frame, select Object Types.
d. In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
2. In the Selection of Query Objects dialog box.
a. Select the following InfoObject catalog:
0CHANOTASSIGNED
b. Choose Transfer Selections.
c. If a dialog box Remote Activation in the Source System <> occurs, choose OK and log on to the source system on the following screen.
d. If a dialog box appears Exceeded runtime when collecting objects choose Continue.
3. At the top of the right frame, choose Install and select Install in Background.
4. In the Install Business Content in the Background dialog box choose Yes.
5. In the Information dialog box choose Continue.
6. Choose Exit.
please advise on how to continue.
thanks and regards

Error Installing Business Content InfoObject 0GN_VENDOR

Hi,
I installed 0GN_VENDOR from Business Content. It was not active after installing.
When I try to activate 0GN_VENDOR I receive the following error messages:
Attribute 0DBCTRYCOD from characteristic 0GN_VENDOR not (actively) available
Attribute 0DBGUDUNS from characteristic 0GN_VENDOR not (actively) available
I looked in Business Content and found that the the two attributes do not exist in Business Content. So I am unable to install to correct the 0GN_VENDOR issue. I also do not find any related OSS Notes on the Attributes.
What should I do to fix this? Just remove the offending Attributes and activate 0GN_VENDOR?

Hi Kenneth,
Check for the inactive info objects 0DBCTRYCOD and 0DBGUDUNS and try to install these IOs too along with the 0GN_VENDOR.
If you are not able to find them in Business content then it might the problem with the BI content version installed in your system.
Regards
KP

Error installing business content

Hi Experts,
i am getting an error while installing business content for sales and distribution.
i.e-The creation of the export DataSource failed,
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
could any body help.

Hi
The DS should be Activated at R/3 to Install the Business Content on BI side.
Recheck the same with the following
R/3
RSA5--Activate the Data Source -- (RSA6 -- Transport the Data Source -- required if you want to replicate on BI Side)
BI Side
Business Content -- Install the same with required grouping conditions (Only necessary objects would be best option)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5c13db90-0201-0010-e59d-bdd1c7b3f8c5
http://help.sap.com/saphelp_nw04s/helpdata/en/5e/e88afcfc724d9d865793da9693dce6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d8/8f5738f988d439e10000009b38f842/frameset.htm
Hope it helps and clear

Unarchive ERROR- Customer [Business content]

Hi All,
I am trying to unarchive MDM Customer business content MDM 7.1 , am getting the following error:
' Archive has too many languages (18) for DBMS Platform limit of (17) for target repository : Customer"
$$$ xoperation ended in ERROR : ffab414fh : Error adding a language . You may have exceeded the maximum number allowed".
1. Is there any DBMS Platform limitations for adding languages?
please advise.
thanks,
Alexander.

Hi Alexander,
It seems like you are using IBM DB2 database.
In order to fix it, Please Check SAP Note: 1143932
Fixed: Language limitation on DB2 databases. Set parameter "IBMDB2 Use Long Varchar For Languages=True" in mds.ini file to activate the fix.
Also refer Similar thread with same issue:
Re: Remove languages for SRM-MDM Repository for archival
Regards,
Mandeep Saini

Error in Business content Query

Hi,
we have activated the business content for General Ledger (New). We have successfully executed all data loads.
but, the standard query 0FIGL_V10_Q0001 which is activated, is not executing properly.
It throws up a message "Value '0' is invalid for property 'Ref. Characteristic' of element 'Balance Sheet Value'" and no data is displayed.
On analysis, we find that, for the calculated key figure Balance sheet value the Ref. characteristic in the Aggregation tab is set as [0]0.
Has anyone faced this issue before. could anyone help us to fix it?
Regards,
Sainath

Hi,
Please apply the note 1015402 to resolve this issue.
Best Regards
Manoj Kumar

Error During Business Content Query Activation- Very Urgent

Hi All,
I am trying to install few queries in business cube 0pur_c01, which is already in production and already lot many queries are running.
As per requirement i have to install New quries in the 0Pur_C01
0PUR_C01_Q0012 : Ordering Activities
0PUR_C01_Q0015 : Purchase Order Values
0PUR_C01_Q0013 : Vendor Comparison re Purchase Values
0PUR_C01_Q0004 : Values Purchase Order Delivery Invoice
0PUR_C01_Q0023 : Total and Average Order Value
Out of these five quries i am unable to install 0PUR_C01_Q0012 : Ordering Activities and geeting error message during simulate install rest queries has been installed already without any issue once i have unselected the already transported
element.
I am doing the same for query 0PUR_C01_Q0012 : Ordering Activities but getting error message
Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
BEx transport request 'SBDK900497' is not available or not suitable
Regards
Premanshu Gupta

Hi,
To rectify this error,
BEx transport request 'SBDK900497' is not available or not suitable
Go to Transport Connection, there click on "BEX" "Create tranport request for BEX", there insert a new row, and create a new request. This is the default request for BEX queries.
While transporting , dont tranport this request, collect the objects which you want to tranport and create a new request.
Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
For this error, check the object in meta data repository, whether the object is in active version or not.I think this object is not in Active version thats why you are getting this error.
Assign points if it helps....

Errors in Business Content Activation

Hi,
The activation of 0MATERIAL with 'data flow before' as grouping is giving lot of errors like
'Mapping between 0CUSTOMER_TEXT DEV100 0CUSTOMER_TEXT is inconsistent'
Here DEV100 is source system name.
Recently we upgraded BC from 02 to 04. And we are at BW 3.1c .And I observed that.
In sp02 , master data is loaded by direct updating
in SP 04 ,master data is loaded by flexible.
Thank you in advance.
With rgds,
Anil

Hi Anil,
Can you try to simulate the activatation of 0material and 0customer infoobjects with "necessary objects" in the grouping. If you encounter errors try to do this one by one. and if you manage to activate both objects with this option, then try to active 0customer and 0material with the grouping "dataflow before" option.
If you still encounter errors, post those errors again. Hope this helps,
Sree

Business content

Hi all,
i have got some error in business content .
BW info object not to be assinged R/3 object so i cant do extraction from R3.
ex: InfoObject 0COMP_CODE, to be assigned to field BUKRS, is not active
pls anybody know let send me details.
Regards
venki

Hi,
Check in t.code RSD1 and give the infoobject name and activate it.
Cheers!
Amit

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Error message in Business Content Installation

Dear All,
I am getting one error message while install some objects in FI through Business Content.
Object '0GL_ACCOUNT_T011_HIER_EC1' (ISTS) of type 'Transfer structure' is not available in version 'A
I have search around but I dont find any related to it.
Please suggest.
Thanks

Hi,
Exactly what your trying to activate?
info object or data source?
Use grouping option as - only necessary object and drag required object form middle pane to right side pane.
try to install it. If it shows any dependences then those first need to install.
above mentioned name is GL Account master data source hierarchy.
Thanks

Error while installing the Business Content 2lis_03_bf Transformation

Hi,
I have installed total 0ic_c03 cube and successful.
Data is populating correct. When ever Releasing the Request error getting which Local objects not captured in request which are there in 2lis_03_bf info source, For this Error I have deleted the objects from info source and activated and activated transformation. But those object are there in the ROUTINES and disturbed. KEYFIGURES Routine are disappeared.
Again when have installing the BF infosource and transformations from Business content is getting below error. for Ref below screen shot.
Please advise me : urgent
Thanks & Regards,
Srinu.Rapolu

Hi,
it seems like issue with ABAP routine.
Can you try to get detail error by doing syntax check.
Also if you are in BW 7.31 - I notices while releasing it shows error. I will suggest ignore it and just released. it worked for me.
You always have option to recapture the transport and resend the same objects, if earlier failed.
Thank-You.
Regards,
VB

Error In Business Content

Similar Messages

Maybe you are looking for