Error in Business object BUS2012

Hi Friends..
If I am Going to run Standard Business object BUS2012 its working fine in local system but it was not working client system. It shows the error message like this..
"Basic idoc type PORDCR02 is not found"
so how can i solve this issue...
Thanks
Gowrishankar

Hi ..
Thanks for your reply..
Both client and local system are same version..
I think in the client system BUS2012 the idoc type prodcr02 is missing so how can i create the particular idoc for client system busines object
BUS2012.
Thanks
Gowrishankar

Similar Messages

Error in Standard Business Object BUS2012

Hi Friends..
Iam using standard business object BUS2012 for purchase order creation workflow.
while creating PO the workflow need to be triggered.
But i got an error message in BUS2012 thatswhy the workflow was not triggered while creating PO.
i got the following error
"Basic IDOC type PORDCR02 is unknown"because of this error the workflow was not getting triggered..
so how can i solve this problem..
Thanks
Gowrishankar

Hi Karri..
I checked already,the erroe occured in business object only..
because if i run the business object in local system it executes perfectly..(if iam using BUS2012 in local system it will trigger the workflow when iam creating PO)
but in client system it wont execute...
it shows the error..(if iam using BUS2012 in client system there is no workflow got triggered when iam creating PO)
so if you know how to solve problem..
let me know..
Thanks
Gowrishankar
Edited by: gowrishankar p on Dec 27, 2007 10:35 AM

Create a web service according to business object 'BUS2012'

Hi,
I want to create a web service according to business object 'BUS2012'.But I can't finish it using wizard.System always tell me 'Time limit exceeded.'Who can give me any idea?
Thanks & Regards
Kelvin

Hi ,
check this article in the site :****************
Regards,
Suryanarayana

Create a Web service by business object 'BUS2012'

Hi,
I want to create a web service according to business object 'BUS2012'.But I can't finish it using wizard.System always tell me 'Time limit exceeded.'Who can give me any idea?
Thanks
Kelvin

Hi ,
check this article in the site :****************
Regards,
Suryanarayana

Unicode error in business object ECC6

Hi all,
We upgraded from 4.6c to ECC6.
While executing a business object we got the syntax following error in ECC6.
The program "Z_2005PP" is not Unicode-compatible, according to its program attributes
We dont know how to solve it, becauseZ_2005PP is a business object.
How to solve this issue?
Regards,
Kumar.

You can unicode enable the Business Objects programs by following steps :
1)     Execute PROG u2018SWO_SET_UC_FLAGu2019
2)     Provide object type.( In your case Z_2005PP )
3)     Execute.
4)     Result
This should resolve the error.
Regards,
Vasuki

Error in Business Object bus2000126

Hello all,
i have given a workflow issue, in customer interaction center.
The issue is " When A OS Tech support case is created in business activity ( crmd_bus2000126 ), the case is open, and this case is assingned to a person ( field-assigned to) and if that person is not taking any action in that case for 4 hrs a notification(via email) has to send to his HR Manager and this continues for every 24hrs till the status not open (ie any other status ).
Business object - bus2000126
Delegated object - zbu2000126
For this case i am creating a fuction module to find the HR managers mail id and i am calling this function module in a method.
Error:
When i try to release the method, it said release the higher level first, so i tried to release the business object ( zbu2000126 ) but it says " SET THE STATUS FOR SUPERTYPE FIRST ".
Can any one help me on this issue.
Note: the subtype is created in one request.
the method that i want to create is in other request.
Thanks in advance

copy the code of the method, delete the method. save and generate...
then again create the method by copying the code.
sometimes it happens with no reason... may be a bug.(My trainer from SAP told me this...)
This will solve your problem first..
Another thumb rule is that object status shud be atleast implemented before releasing the method.
Based on the last error message better do the following, check the status of supertype BUS2000126. Make it to relesed if necessary.
Your problem will be solved.
Regards,
Sandeep Josyula
Reward Points if your problem solved by this..

Applet Java_Report_Panel Notinited Error in Business Objects XIR2 Webi

Hi,
I am facing a error Applet Java_Report_Panel Notinited when I want to create or edit a Web Intelligence report.
The Current version of BO is XIR2.
The version of Java installed on my machine is 1.6.0.
Whenever, I try to create or modify a new report through Infoview, I get a blank Page and at the bottom of the Infoview, it displays
Java Report Panel Notinited.
This was working fine till yesterday. There were no changes or updates done on the machine.
Just for reference, the reports work fine, when I use the other panels such as the Query-HTML and HTML Report Panel.
I had enabled all the required options in the Internet Explorer. but still, I face the Issue.
Let me know what has to be done in resolving the same.

bouser39:
This was working fine till yesterday. There were no changes or updates done on the machine
Are you absolutely sure about no changes applied? I.e. you solely are the administrator, and you have sole access to this server in regards to administration, loading patches, or other configurations? The "no init" I ran into a couple of years back and the cause was our web admin wanted to make a shorter URL appear in the address bar (something like ACME.com/BO) versus ACME.com/businessobjects/enterprise115/infoview, so he built a "virtual" web folder and had it say "BO". Well, everything worked fine in Infoview, logging in, running reports, etc, etc, however, after loading a particular service pack, and then when we went to build a new web intelligence document the whole house of cards came toppling down. Long story short, we had to forego the "BO" short name and revert back to the long URL, as ugly as it appeared, the previous method of "BO" was not longer applicable with the new "java bridge" that Business Objects had implemented with their new service pack. So, perhaps someone tried to make things more efficient for you, but in the long run actually broke a few things along the way....
Thanks,
John

Unicode error : Error in business object in transaction"SWO1'. RETURN VALUE

Hi ,
in an upgrade situation a Object Z00MARA is showing an error stating
"RETURN" is an ABAP key word and cannot be redefined as a DEFINE macro . . . .
the statement look like
DEFINE RETURN.
Thanks
richard

Hi,
I think RETURN is a key word we can not change it
please change it to d_return or something
Regards
Shiva

Runtime Error '109' - Business Object 6.5 - VBA macro

I am getting the same Runtime error '109' when trying to run my old reports(6.5) which have VBA Macros with the new XI 3.1 DeskI. Here's what I did:
1) Installed BO XI 3.1 client Tools on a machine which has BO 6.5 client tools
2) Opened the .rep in the XI 3.1 DeskI. CLick OK when it warns you that it is a earlier version and If you want to convert to new version.
Then when i try to run the report i get this error. The same .rep runs just fine with 6.5 Full Client.
Any Ideas guys? Am I missing any references or something ?
Thanks
Edited by: Larry Sherman on Aug 14, 2009 8:28 PM

Larry, I have seen some instances of VBA code not running in the new Deski version, possibly some calls are different. You will want to open an SAP incident for eng. to take a look at the VBA code.

How to write this formulas without error in Business Objects..

1: '=substr([D Bank File Warrant Status];2;1)
2: '= If [Chk Recon Check/EFT Amt] = '0' and ([Chk Recon Status Detail] = "Paid" and [Bank File Warrant Status Displayed]= 'V') then "No" else "Yes"
what is this 'v', here it gvn as void, bt i dont know how to write it in formula....
3: '=IF [Bank File Status Detail] inlist ('0V'; '0S') and [Chk Recon Check/EFT Amt] does not exist (is null) then 'Yes' else 'No'
4: '= IF [Chk Recon Status Detail] inlist ("Cancelled" or "Void" and [Bank File Warrant Amount] does not exist (is null) then 'Yes' else 'No'
plz let me know how to write them in formula asap... Thank u in advance..

Plese post your query to the [WEBI|SAP BusinessObjects Web Intelligence; forum then.
And don't forget to close this thread.
- Ludek

Desktop Intelligence: Business Objects has stopped working in Windows Vista

Hi,
We have installed the BO XI 3.1 SP3 client components in Windows Vista Machine. When I was working with Desktop Intelligence, the program keep terminates irregularly. A pop-up window would appear saying "Business Objects has stopped working. A problem caused the program to stop working correctly. Please close the program." It asks me to close the program. The window always pops up even when I just terminate the BOE normally. It sometimes pops up when I was just trying to refresh the data or in the middle of working with the application.
THanks.

Hi expert
I have install the BO XI into my laptop with 32-bit OS and Windows Vista Enterprise SP 2 but still experience the same error message "Business Objects has stopped working - A problem caused the program to stop working correctly. Please close the program".
Please help as my daily task require to use BO very often.
Thank you very much
br
Elwin

Not able to link the cloned business object in change document

Hi Experts,
I cloned standard business object FIPP. When I give the cloned busniess object in change document linkage, I am getting the error message Business object type ZFI_CREDIT has status modeled. Linkage not possible. Please let me know the proceedue to make the linkage.
Thanks in advance.
Regards,
Viven

In SWO1 you have a possibility to change the status of your custom business object into implemented.

Business Objects in Vista

Hi everyone!
I am trying to make my first steps in Business Objects and i am trying to install Business Objects Data Integrator with Windows Vista.
I recieve the error message that this product use Windows NT 4.0 or higher. I saw a message saying that Vista it is not supported . But my question is: Is there some work around to this situation?
Best Regards
João Fernandes

Hi expert
I have install the BO XI into my laptop with 32-bit OS and Windows Vista Enterprise SP 2 but still experience the same error message "Business Objects has stopped working - A problem caused the program to stop working correctly. Please close the program".
Please help as my daily task require to use BO very often.
Thank you very much
br
Elwin

Business object for PO and SWOTICE entries

Hi all,
We've copied the standard business object for a PO - BUS2012 to a Z object to be used in a workflow. In one of the methods for this Z object, we've used BAPI_PO_CHANGE to block an item of the PO. As soon as the program was generated, under the object list of the transport request for these changes, some entries got created for table SWOTICE -
    BAPIADDRESS
    BAPIEKET
    BAPIEKKN
    BAPIEKKOA
    BAPIEKKOC
    BAPIEKKOP
    BAPIEKPOA
    BAPIEKPOC
    BAPIEKPOTX
    BAPIESKLC
    BAPIESLLC
    BAPIESLLTX
    BAPIESUCC
    BAPIESUHC
    BAPIMMPARA
    BAPIRETURN
    BAPIEKKO
    BAPIEKKOL
    BAPIEKPO
    BAPIEKAN
    BAPIEKBE
    BAPIEKBES
    BAPIEKES
    BAPIEKKOTX
    BAPIESKL
    BAPIESLL
    BAPIESUC
    BAPIESUH
    BAPIRLCOPO
    BAPIRLGNPO
SWOTICE - index of frozen DDIC structures.
What is the significance of this table and items? Why did they appear in the object list of the transport request when the program was generated?
I checked these structures if they're a part of the BAPI_PO_CHANGE interface, but they're not.
They were present in the main program for the original business object BUS2012.
Could somebody throw some light on this?
Regards
Deepthi.

These are internally related to BUS2012. When ever U copy to a Z object and generate the object, some of the objects which runs the object gets generated automatically in the transport list. These are as such needed for the program to work fine.

Business object reference in ABAP Classes

Hi All,
Here is my requirement.
1) I have a Business Object (say e.g BUS2012) instance in my workflow container
2) I have a task in my workflow referring to a Z-Class and its method (M1)
3) I want to access the attributes of the above Business Object (BUS2012)in the method (M1)of the class.
Please let me know how ? Sample code will be more helpful.
Thanks,
Deb

Hi Deb,
Please check the following [thread|Re: Creating instance of Business Objects;
Hope this helps!
Regards,
Saumya

Error in Business object BUS2012

Similar Messages

Maybe you are looking for