Error in BW ( Operating system call SiPeekPendConn failed )

Hi All,
This is Ganesh, new to SAP BASIS. We are facing some errors in BW, where users cannot able to run BW reports from yesterday.
Please find below system log details:
Operating system call recv failed (error no. 10054)
NiConnect Unsuccessful, Return Code: -0010
> Host: 156.5.30.34
> Service: sapgw00
Please help me out by providing the solution and the cause for above system log.
Waiting for your reply.
Best Regards,
Ganesh

Hi,
check this,
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/sap-r3-to-bw-521356#M521423
Also try to search with the error ur getting in Google or for Notes in SMP.
Regards,
Ravi

Similar Messages

  • I fail to start the sap server with error:Operating system call recv failed

    I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
    R/3 Basis System: Operating system call           recv failed (error no. 10053)
    Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

    trc file: "dev_disp", trc level: 1, release: "620"
    Sun May 07 13:14:30 2000
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        3628
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    Sun May 07 13:14:32 2000
    WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
    Sun May 07 13:14:37 2000
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          12784     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
    DpShMCreate: allocated sys_adm at 001E0040
    DpShMCreate: allocated wp_adm at 001E0560
    DpShMCreate: allocated tm_adm_list at 001E3750
    DpShMCreate: allocated tm_adm at 001E3778
    DpShMCreate: allocated wp_ca_adm at 00380438
    DpShMCreate: allocated appc_ca_adm at 00384A88
    DpShMCreate: allocated comm_adm_list at 003861F8
    DpShMCreate: allocated comm_adm at 00386210
    DpShMCreate: allocated ca_info at 003B5010
    DpShMCreate: allocated wall_adm at 003B5018
    MBUF state OFF
    Sun May 07 13:14:38 2000
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
    <ES> 2457 blocks reserved for free list.
    ES initialized.
    ***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6200, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
    DpMsgAdmin: Set patchno for this platform to 674
    Release check o.K.
    Sun May 07 13:15:18 2000
    ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    Sun May 07 13:15:38 2000
    ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W13
    my types changed after wp death/restart 0xbf --> 0xb7
    Sun May 07 13:15:58 2000
    ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W15
    Sun May 07 13:16:18 2000
    ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    my types changed after wp death/restart 0xb7 --> 0xb5
    Sun May 07 13:16:38 2000
    ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W14
    ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W16
    my types changed after wp death/restart 0xb5 --> 0x80
    DP_FATAL_ERROR => DpEnvCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    DpModState: change server state from STARTING to SHUTDOWN
    Sun May 07 13:16:42 2000
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
    MBUF state OFF
    MBUF component DOWN
    ***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

  • System log shows operating system call recv failed(error no.73)

    hi all,
      here i have some doubt in system log please clarify me,
    here in my (sm21)system log files i find more no  of logs for dispatcher and it indicates operating system call recv failed(error no.73)
    system log  Short Text shows:
    Operating system call &5&5&4 failed (error no. &>E5)
    The specified operating system call was returned with an error.
    For communication calls (receive, send, etc) often the cause of errors are network problems.
    It could also be a configuration problem at operating system level. (file cannot be opened, no space in the file system etc.).
    what is means

    Hello,
    Yes, you are right, these kind of problems (OS Error 73) are usually caused by network issues. Error 73 means 'connection reset by peer'. In most cases, this is because the connection was interupted by the communication partner or an active network component between.
    I provide you some recommendations:
    - Check your Network environment. You can use NIPING tool to diagnose it (note 500235), check your MTU stability.
    - Check note 27320 - keep alive and gui_auto_logout profile param
    - Also you can implement note 1002075 for a possible solution
    I hope this helps you.
    Regards,
    Blanca

  • Error on WAS no. 10054 SAP Basis System: Operating system call

    Hi All,
    Error on WAS no. 10054 SAP Basis System: Operating system call
    we got the following error message in the syslog of the WAS:
    SAP Basis System: Operating system call  recv failed (error no. 10054)
    The system still works. What can we do?
    Thanks.
    Best Regards,

    Hi,
    Please check the folloiwng notes
    Error no. 10054
    34116 - Syslog: "Operating System call xxxx failed"
    Thanks
    Adil

  • Work Process tries to restart but fails - Operating system call fork:restar

    Hi
      We have a ECC 5.0 system running on v5r4 (6.40 kernel level 159).  Some of the work processes fail and then try to restart and fail again. Thus there are many job log entries in both SAP and OS/400.
    The OS/400 logs mention the PASE (unix executable environment) and MCH3203.
    SAP mentions Operating system call fork:restart
    OSS has note #884359 which mentions a palitative but despite being at 6.40 level 159 the parameter profile as/4/wp_max_restart is said to be "unknown" by RZ10.
    We are making sure we are up to date with the APAR II14126 just in case this is the issue.
    It did start after the time change but we are not sure this is the root cause.
    We are also considering getting upto kernel 171.
    Anyone else seen this issue?
    thanks
    Matthew Milne

    We see those problems once a while, and usually they are gone when you restart the instance or after an IPL. You should report the problem to IBM, they will probably be interested in the LIC log entries that come along with the error (STRSST - Start a Service Tool - Licensed Internal Code Log). II14126 is probably a good start (for example, MF40759).
    The profile parameter as4/wp_max_restart is only known to the kernel, because it is not intended as a permament setting, but only as a temporary workaround for the problem in the PASE environment. That's why RZ11 does not know about the parameter and reports it as unknown.
    Kind regards,
    Christian Bartels.

  • Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the las

    Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
    I don't know if the bug exists in the program or the "Creative Cloud.
    Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?

    Entering the serial number is probably part of the registration process.
    Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted?

  • Error in external tax system: SAX processing failed on input stream SAX pro

    Hi
    When I was posted in T.Code: FB70,  (Customer Invoice) I am getting below mentioned error.
    Error in external tax system: SAX processing failed on input stream SAX processi.
    I put tick mark on calculate Tax column and select O1(A/R Sales Taxable).
    Pls. help me.
    Thanks
    Ranjith

    Hi Ranjith,
    I also face this problem in Production now.
    Could you kindly share with me how you resolved this issue?
    Thanks,
    Markus

  • Operating system call w2k and linux

    Hello:
    I am not a programmer but i nedd a routine to do an operating system call and execute a batch or shell set of commands,
    do anyone know how can i do it?
    thanks a lot in advance

    Or maybe Runtime.exec is enough for you. MUCH simpler than JNI, as long as a shell executing a script is all you want.
    Read this first:
    http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
    %

  • I have deleted all my bookmarks from firefox sync by error on reintalling operating system. Is there any way to recover it? I have all bookmarks saved on "Firefox Home" on my iPod. Can I extract bookmarks from "Firefox Home" to my computer? Thanks

    I have deleted all my bookmarks from firefox sync by error on reintalling operating system. Is there any way to recover it? I have all bookmarks saved on "Firefox Home" on my iPod. Can I extract bookmarks from "Firefox Home" to my computer? Thanks

    Restore your backup.

  • Operating system calls from apex

    Question about operating system calls from apex.
    I created a java file which is wrapped with pl/sql like
    create or replace java source named "ExternalCall" as
    import java.io.*;
    I do the steps from this web page http://www.oracle.com/global/de/community/tipps/oscalls/index.html
    The page is in german, but for experienced users the code on this page says everything.
    In apex i have an application which calls this function with the "move" command in a sql-report region.
    Let's say move c:\work1\file.txt c:\work2\file.txt
    Everything works fine on one host(pc) but if i want to transfer the file from my host to another one then
    i get the messgage "no access" although i have read, write access on the other host.
    By the way, on both hosts i have admin rights.
    Why can't i transfer the file over a network ?
    Thanks in advance for any kind of help.
    Regards
    Stefan
    null

    You say that "on both hosts i have admin rights".
    Remember that Oracle doesn't log in as "you", so Oracle may not have rights to the remote host.
    There are a lot of different permissions that can be assigned to java stored procedures. This chapter in the documentation might help:
    http://download-east.oracle.com/docs/cd/B19306_01/java.102/b14187/chnine.htm#BABFBDGG
    You might get better help from the JVM forum:
    Java in the Oracle Database

  • Operating System Calls from APEX with Java and PL/SQL

    Question about operating system calls from apex.
    I created a java file which is wrapped with pl/sql like
    create or replace java source named "ExternalCall" as
    import java.io.*;
    I do the steps from this web page http://www.oracle.com/global/de/community/tipps/oscalls/index.html
    The page is in german, but for experienced users the code on this page says everything.
    In apex i have an application which calls this function with the "move" command in a sql-report region.
    Let's say move c:\work1\file.txt c:\work2\file.txt
    Everything works fine on one host(pc) but if i want to transfer the file from my host to another one then
    i get the messgage "no access" although i have read, write access on the other host.
    By the way, on both hosts i have admin rights.
    Why can't i transfer the file over a network ?
    Thanks in advance for any kind of help.
    Regards
    Stefan

    I guess you are working on a Windows host. In this case Oracle processes are running as Windows services with a build-in MS system account. This account has no access to network ressources. You have two ways to get out of your windows box:
    Assign Oracle services a network enabled account, e.g. domain user with local administrator privileges. (I never tried this and I don't like to recommend it.)
    Use a command script for copying files and use explicite authentication within this script:-
    net use \\myserver\ipc$ tiger /user:scott
    copy c:\temp\xxx1 \\myserver\share\temp
    copy c:\temp\xxx2 \\myserver\share\temp
    Michael

  • When the keyboard is unplugged I get "Error 1962: No Operating system found."

    I have a new Lenovo ThinkServer TS130 1105B2U. It has a Core i3-3220 and 4GB of memory. SATA 0 and SATA 1 each have a 250GB HDD configured to mirror each other using RAID1. I just finished installing Windows 7 Pro and drivers. However, I have discovered that when I try to reboot the machine with my USB keyboard disconnected I get "Error 1962: No operating system found. Press any key to repeat boot sequence." When I reconnect the USB keyboard and reboot the machine, Windows 7 Pro boots like expected. Why can't it find the operating system if the keyboard is unplugged?

    This is fixed in BIOS version 20B.
    You can use the following link to update BIOS from witin Windows.
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/bios_ts130_51a20b.exe
    The Readme is:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/ts130_51a20b_windows.txt

  • "ERROR 1962: No operating system found." After installing ESXi 5.5 successfully.

    I just installed VMware vSphere esxi 5.5 hypervisor on my lenovo think-center machine with config: i5, 3.2gHz, >300gb SATA HDD, 6GB ram. However after successful installation I receive "ERROR 1962: NO OPERATING SYSTEM FOUND". I've tried 'formatwithmbr' and tweaking some of my BIOS setting like changing boot mode to legacy,auto and UEFI one after another, putting boot preference for HDD first etc. But none seems to work. I think BIOS and its settings are completely ineffective when it tries to boot, and I am not even taken to the esxi 5.5 hypervisor menu. Kindly help.
    PS- The machine had windows server 2012 as running OS while installing esxi 5.5.

    Dear rachitt_23
    1. May I know what machine are you using?
    2. Check whether Intel VT Technology is Enabled? 
    3. Even if the boot mode is set to Auto, check that it is configured to Legacy first.
    Peter
    ThinkPad W520 (4284-A99) | ThinkCentre E73 SFF (10AU-0040SG) | i9300 - CM11 / GoogyMax 2
    Give kudos to reward people for their assistance | Mark the thread solved if the solution works | Direct e-mail regarding technical problems will be ignored
    =====================================
    Dolby ; IdeaPad Slate Tablet ; Equalizer APO 

  • H520s Error 1962 No operating system found

    Hi, I have a Lenovo H520s, and two problems just appeared. First of all, it started to show "Start PXE over IPv4," then after waiting for a while "PXE-E18: Server response timeout. Start PXE over IPv6" would appear. A little bit later, the computer simply shows "Error 1962: No operating system found."
    I went into the BIOS and I have Boot Mode set to "Auto" with UEFI first. I don't know where to go from here.
    I recently used IOBit Uninstaller to uninstall all the software for my Epson WF-3540 scanner/printer and then reinstalled everything, and my only theory was that IOBit uninstaller deleted something that it should not have. This is probably the first time I have turned the computer off and on again since then.
    Does anyone have any ideas? Thanks.

    Dear rachitt_23
    1. May I know what machine are you using?
    2. Check whether Intel VT Technology is Enabled? 
    3. Even if the boot mode is set to Auto, check that it is configured to Legacy first.
    Peter
    ThinkPad W520 (4284-A99) | ThinkCentre E73 SFF (10AU-0040SG) | i9300 - CM11 / GoogyMax 2
    Give kudos to reward people for their assistance | Mark the thread solved if the solution works | Direct e-mail regarding technical problems will be ignored
    =====================================
    Dolby ; IdeaPad Slate Tablet ; Equalizer APO 

  • Getting error with DbSl Trace: OCI-call 'olog' failed: rc = 1017

    Hi,
    We are working on osdbmigration, exporting from oracle to SQL Server.
    When we run ./R3SETUP -f DBEXPORT.R3S getting the below error:
    INFO 2011-06-10 05:17:46 R3SZCHK_IND_ORA R3ldctlDo:0
        DbSl Trace: OCI-call 'olog' failed: rc = 1017
        DbSl Trace: CONNECT failed with sql error 1017
    We have performed allthe pre-checks successfully and can able to connect system/manager at SQL.
    Regards,
    Karthik.

    Have you followed the Note 400241 - Problems with ops$ or sapr3 connect to Oracle

Maybe you are looking for