Error in Calculator on Mac!

Hello
Sry for my bad language, i'm swiss.
so, i found an error in calculator on mac(OS Leopard).
Try 0,14 x 100, it will give a error.
its not possible to insert a 0,... value.
i hope it's only a settings problems.
Else, i wouldn't buy a new mac, because this is a simple math rule what every pc or mac should know.
could you help me?
i am really sad and angry about that, because i paid a lot and i didn't became the quality for that price.
thanks and see you
Baumgartner Marco

thank you very much for awnser.
i was at the DataQuest store(Premium Apple Reseller in Switzerland), they didn't knew that
so we try it on a test/sell iMac in the shop, it doesn't work with the "." or with ",".
We try the german layout too, because they use the point too, with the same negative resault.-.-'
i don't know, am i the first user with that problem?
No one else use the calculator? good in math hmm ?
it might be a bug in the swiss layout...

Similar Messages

Popup window error message on a Mac .....There was a problem connecting to the server 172.17.0.22

I keep getting a popup error message on my mac "There was a problem connecting to the server 172.17.0.22"
How do I fix this problem

That is The moment you go to open a new website it will reappear and then you need to close it before I can access the website I want. …

Error while calculating the net present value

Dear experts,
Please help me in solving the following error.
I am trying to do project vaibility analysis through pre investment analysis in appropriation request, interm I'm trying to calculate the IRR for the project.
I have created the appropriation request and given all the data in that including the planed values for the project.
In Variants tab of appropriation request, preinv. analysis sub tab, i have clicked the button Calculate preinvestment analysis figures , ( I hvae not mentioned any values in that screen, its picking the plan cost from the planed values of the appropriation request) there I'm getting an error saying
Error while calculating the net present value
If I open the message it is as follows:
Error while calculating the net present value*
*Message no. AO215*
Diagnosis
An error occurred during calculation of the net present value.
The yield curve for determining the net present value is not completely maintained. Possible causes are:
1. Evaluation type IM01 does not exist (table ATSYC).
2. Yield curve types 9990 (bid) and 9991 (ask) have not been created (table JBD14) for the currency of the controlling area of the appropriation request.
3. Reference interest rates have not been created for the yield curves (tables T056R and JBD15).
4. Interest rates are not maintained for the complete planning time period for the reference interest rates.
5. Under certain circumstances, the standard exchange rate types 'G' and 'B' may be inconsistent.
Procedure
Check your Customizing settings:
1. SAP supplies the evaluation types.
Remember, SAP supplies the evaluation types in client 000. You have to copy them into your working clients. If you do not have them in your system, you can create them in Customizing for the Treasury component (Treasury Management -> Market Risk Management -> Evaluations -> Define Default Settings). Create evaluation type IM01 with bid yield curve type 9990 and ask yield curve type 9991.
2. In Customizing for appropriation requests (under Planning), create a bid yield curve type 9990 and an ask yield curve type for the currency of the controlling area of the appropriation request.
3. Create at least one reference interest rate for each yield curve.
4. Maintain the reference rates, starting at the minimum fron the point at which you you have planned costs or revenue.
5. Check Customizing of the exchange rate types 'G' and 'B' in the IMG under Global Settings -> Currencies.
I have checked all the procedures of the said customization and the values are similar to that of the error message, but still I'm unable to proceed further.
I have goe through the note 160375, but did not succeed on this issue.
Can any one help me out in solving the above error and also can any one explain me the process in SAP to calculate IRR?
Is there any more customization missing or whats wrong going in that process?
Please help me out...
Thanks in advance..
Regards,
Praveen.

Are you installing a Demo version of NetWeaver? If so please post your questions and search for answers here: SAP NetWeaver Application Server
If this a real full blown system please contact the OSS, via the Marketplace (service.sap.com) or by OSS transaction in your SAP System.

No memory error message on my mac mini what do i need to do?

No memory error message on my mac mini when i try to update. What do need to do?

Please post the entire and exact message.

HT3421 I get this error This update requires Mac OS X Tiger 10.4.11 or newer or Mac OS X Leopard version 10.5.6 or newer.

I need to download this: (http://support.apple.com/kb/DL788) because my macbook wont turn on unless its charged. I did all the resets like VPRAM, SMC, and I forgot the other one.
My pack thingy is 0002 and it says that if its 0003 then you dont need the update but I do need the update.
I get this error:
This update requires Mac OS X Tiger 10.4.11 or newer or Mac OS X Leopard version 10.5.6 or newer.
I purchased the battery in December. It worked fine but now its happening again! Please help! Its annoying and the nearest Apple store is 2 hours away!

Please help me!

ERRORS in calculations in AS3

I have serios errors in calculation when my application
compiled as ActionScript3.
When it compiled as AS2 - no errors. These errors (For AS3)
is present in all versions of Flah Player 9 which I has checked.
Please anyone try to compile this code as AS3 (Maybe I've got
just my personal problems with my software/hardware):
////// ActionScrip3 (ERRORS)
var f_Result:Number;
f_Result = 456.2225 - 332.8892;
trace(f_Result); // 123.33330000000001 (Must be 123.3333)
f_Result = Math.sin(Math.PI/6);
trace(f_Result); // 0.49999999999999994 (Must be 0.5)
f_Result = Math.cos(Math.PI/3);
trace(f_Result); // 0.5000000000000001 (Must be 0.5)
//////// END
////////// ActionScrip2 (NO errors)
var f_Result:Number;
f_Result = 456.2225 - 332.8892;
trace(f_Result); // 123.3333 (OK)
f_Result = Math.sin(Math.PI/6);
trace(f_Result); // 0.5 (OK)
f_Result = Math.cos(Math.PI/3);
trace(f_Result); // 0.5 (OK)
//////// END

Hi Frstorm,
I compiled in AS3 with no errors. The Output is:
123.33330000000001
0.49999999999999994
0.5000000000000001
////// ActionScrip3 (ERRORS)
var f_Result:Number;
f_Result = 456.2225 - 332.8892;
trace(f_Result); // 123.33330000000001 (Must be 123.3333)
f_Result = Math.sin(Math.PI/6);
trace(f_Result); // 0.49999999999999994 (Must be 0.5)
f_Result = Math.cos(Math.PI/3);
trace(f_Result); // 0.5000000000000001 (Must be 0.5)
//////// END

I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any ideas?

I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any help appreciated. Very frustrating!

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

An error occurred while installing mac os x

i have erase my all data and now i m going to re-install OS from (command +r) internet recovery its OS X Loin (10.7).
it successfully download additional components from internet and then during installing OS an error display on screen
"an error occurred while installing mac os x"
Please advise me about this error ???

maybe your disc got some problem.

TS1602 how do I fix an error 8058 on a mac???

How do I fix an error 8058 on a mac???

Solution may be found if you search in the "More Like This" section over in the right column.

I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

SparkchaserEd wrote:
I am getting an error when resizing the Mac HD.
What does this error say?

Error code 21 on mac in iTunes during restore

Error code 21 on mac in iTunes during restore

That one can be associated with security software troubles. In the course of your troubleshooting to date, have you worked through the following document?
iTunes: Troubleshooting security software issues

Strange error in calculator

Hi community,
there is a strange error in calculator or in my system. If I use the -/+ in the calculator it changes the number.
Try this.
Put in 51,99 and hit the -/+ sign. In my system it changes the number to -51,98999999999999.
I also tried it for some number around 40. There is the same thing happens. I tried higher and lower numbers, they are working fine. Can anybody reconstruct this?

Could I ask you to try something for me - I've been trying to get someone to try this on couple of forums but no luck.
I can't secure empty trash in Yosemite if it contains a locked file. It appears to do it but the file remains.
So if you could create a simple locked file - text, pdf anything and delete it to trash. Then try Secure Empty Trash and see what happens. I get the "Remove Locked Item?" window option and select it but the window closes and trash doesn't empty. If I unlock the file it still won't empty but it will empty under the normal "Empty Trash" option.
Big help if you could give it a go?
Thanks

Unable to download "source code" error message (on a Mac, this is not happening in safari so it seems to be a firefox problem)

Just in the last 24 hours I'm not able to download using Firefox for Yahoo mail. Tried it on Safari and it worked, but prefer Firefox as browser. I'm on a MacBook Pro. The message I get is:
"....part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator."

I've had this problem for 3 years. And I can see that questions were posted by others in 2006. The only answer that works for me is to ignore the Firefox error message. Save the document from downloads onto my desktop. Change the .ashx ending to .pdf and confirm that. Then it opens in Preview.
Neither the Shockwave nor the Adobe tricks work on my mac.
How come Firefox can has not dealt with this error 4 years on and more "modernising" websites use this format? Please?

Error: An error occurred while generating Mac Projector. Please try exporting to a different location.

on Yosemite Mac. embedded flv's. getting the above error. exe publishes without issue. any ideas? thanks!

close your flash pro> reopen your flash pro>re-export your projector.
if that fails, restart your computer and retry.
if that fails, open a new fla and export that projector.
if that fails, reset your flash preferences,
Factory Reset:
(Mac)
Double click on Adobe Flash’s icon.
Holding down the Command, Option, Shift keys quickly
When a dialog box appears, click Yes.
(Windows)
Double click on Adobe Flash’s icon.
Holding down the Ctrl+Alt+Shift keys quickly
When a dialog box appears, click Yes.
delete user configuration and preferences files manually:
Window XP – C:\Documents and Settings\<username>\Local Settings\Application Data\Adobe\Flash<version>
Window Vista & Window 7- C:\Users\<username>[AppData]\Local\Adobe\Flash<version>
Mac – Volume/Users/<username>/Library/Application Support/Adobe/Flash<version>

Error during calculation of work in process (WIP)

Hi all,
I have a problem during calculation of WIP. After entering all data, system reports me that WIP calculation could not be done because of following error:
Create a cost element for the usage of inventory (line ID COP)
Message no. KJ307
Diagnosis
In results analysis, capitalized costs are created and apportioned to the line IDs. If the Split creation/usage indicator is set in the extended control of the results analysis version, then the usage of the capitalized costs is written under a separate results analysis cost element for each line ID.
Procedure
Go into Customizing for Product Cost Controlling and carry out the following steps:
1. Create a cost element for the capitalized costs used for line ID COP.
2. Enter this cost element under Define Update for Results Analysis.
I can't find transaction or path for solution from the procedure. Pls help.
Thank you all.

Hi Uros,
Hope my reply wil help u.
U can find this trasaction path at ,
SPRO--> Reference IMG --> Controlling --> Product Cost Controlling --> Product Cost Planning --> Define Cost Element
Find Assingment of Cost Element under Information Systems
--> Define Update

Error in Calculator on Mac!

Similar Messages

Maybe you are looking for