Error in calling BADI

Hi All,
I have created a BADI and implemeted it and when i tried to call it in the program it going to short dump.
I debugged the program and found out that in 'cl_exithandler=>get_class_name_by_interface' an exception 4 'data_incons_in_exit_managem' raised, please provide methe input on what i have to do.
Thanks,
Krish.

Hi,
If you are trying to call a New BADI (implemented with Enhancement Spot) , then you got to use GET BADI and CALL BADI.
If you are trying to call a Classic BADI, use cl_exithandler=>get_instance
If you have done the calling right, then check if you are passing all correct parameters and using the correct object. For a classic BADI, the object will be a reference to the Interface name. In the New BADI, the object will refer to the BADI definition.

Similar Messages

Error while calling badi using class cl_exithandler with getInstance

hi experts...we are using SAP ECC 6.0 version
I have created BADI Def and Implementation using se18 and se19 with some interface methods..
Problem:
I'm writing a report to call that using class CL_EXITHANDLER but it shows an Exception..
" Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised."
Report example:
DATA: CL_EXIT TYPE REF TO CL_EXITHANDLER,
 IF_USER_INSTANCE TYPE REF TO ZIF_EX_USER_MAILID1.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
 EXIT_NAME = 'ZBADI_USERMAIL_DEF'
* NULL_INSTANCE_ACCEPTED = SEEX_FALSE
* IMPORTING
* ACT_IMP_EXISTING =
CHANGING
 instance = IF_USER_INSTANCE
* EXCEPTIONS
* NO_REFERENCE = 1
* NO_INTERFACE_REFERENCE = 2
* NO_EXIT_INTERFACE = 3
* CLASS_NOT_IMPLEMENT_INTERFACE = 4
* SINGLE_EXIT_MULTIPLY_ACTIVE = 5
* CAST_ERROR = 6
* EXIT_NOT_EXISTING = 7
* DATA_INCONS_IN_EXIT_MANAGEM = 8
* others = 9
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
so i found that all EXITs are in the Table " SXS_ATTR"
but what i have created BADI has not exist in that Table so that it gets an Exception(while i'm debugging found this)
so kindly tel me whats problem my BADI "ZBADI_USERMAIL_DEF" not maintained that Database table
but in Implentation class its working fine..

yes i have created badi in Enhancement spot so regarding what u told i'm using GET BADI and CALL BADI
DATA:W_HANDLE TYPE REF TO ZBADI_USERMAIL_DEF.
GET BADI W_HANDLE.
CALL BADI w_handle->get_user_mailid
EXPORTING
 uname = UNAME
changing
 mailid = W_EMAIL
WRITE: / 'UNAME:',UNAME.
WRITE: / 'EMAIL ID',W_EMAIL.
CALL BADI w_handle->get_user_address_data
EXPORTING
 uname = UNAME
changing
 addrdata = W_ADDRDATA
IF W_ADDRDATA IS NOT INITIAL.
WRITE: / W_ADDRDATA-BNAME,W_ADDRDATA-NAME1,W_ADDRDATA-NAME2,W_ADDRDATA-TELPR,W_ADDRDATA-TELNR,W_ADDRDATA-TEL01.
ENDIF.
but here BADI are not called
Interface implementation class methods not executed so kindly tel me whats problem here.
Thanks in Advance
sivakumar

Formal error: Invalid calling sequence for function modules

Hi All,
I have developed a function module for FQEVENT 620 Payment: Transfer Line Items for Clearing.
The clearing works fine.
After clearing the open items i need to post an FI-CA Document(BAPI : BAPI_CTRACDOCUMENT_CREATE) for each open item(cleared item)
I have used the bapi : BAPI_CTRACDOCUMENT_CREATE in the same function module that i have developed for FQEVENT 620 Payment: Transfer Line Items for Clearing.Here i am getting an error "Formal error: Invalid calling sequence for function modules".
So please let me know where i can use this bapi to post fi-ca document.Is there a BAdi or Enhancement Spot where i can use this BAPI or tell me what should i do to overcome this error.
Regards
Venkat

Venkat:
While I am confused about your business process - creating an open item when clearing one seems strange. Look into event 0020 which is called after documents are posted - it may present the opportunity to post process additional documents.
regards,
bill.

Getting Msg: Error when calling Credit Management: Technical Error

Hi All,
While creation of sales order in ECC, i am getting a message "Error when calling Credit Management: Technical Error"
Can you help me in this case
Regards,
Satish

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

Error while calling a method on Bean (EJB 3.0)

I am getting an error while calling a method on EJB. I am using EJB3.0 and my bean is getting properly deployed(i am sure b'cos i can see the successfullly deployed message). Can any body help me
Error is -->
Error while destroying resource :An I/O error has occured while flushing the output - Exception: java.io.IOException: An established connection was aborted by the software in your host machine
Stack Trace:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at com.sun.enterprise.server.ss.provider.ASOutputStream.write(ASOutputStream.java:138)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at org.postgresql.PG_Stream.flush(PG_Stream.java:352)
at org.postgresql.core.QueryExecutor.sendQuery(QueryExecutor.java:159)
at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:70)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:482)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:461)
at org.postgresql.jdbc1.AbstractJdbc1Connection.rollback(AbstractJdbc1Connection.java:1031)
at org.postgresql.jdbc2.optional.PooledConnectionImpl$ConnectionHandler.invoke(PooledConnectionImpl.java:223)
at $Proxy34.close(Unknown Source)
at com.sun.gjc.spi.ManagedConnection.destroy(ManagedConnection.java:274)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.destroyResource(LocalTxConnectorAllocator.java:103)
at com.sun.enterprise.resource.AbstractResourcePool.destroyResource(AbstractResourcePool.java:603)
at com.sun.enterprise.resource.AbstractResourcePool.resourceErrorOccurred(AbstractResourcePool.java:713)
at com.sun.enterprise.resource.PoolManagerImpl.putbackResourceToPool(PoolManagerImpl.java:424)
at com.sun.enterprise.resource.PoolManagerImpl.resourceClosed(PoolManagerImpl.java:393)
at com.sun.enterprise.resource.LocalTxConnectionEventListener.connectionClosed(LocalTxConnectionEventListener.java:69)
at com.sun.gjc.spi.ManagedConnection.connectionClosed(ManagedConnection.java:618)
at com.sun.gjc.spi.ConnectionHolder.close(ConnectionHolder.java:163)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeDatasourceConnection(DatabaseAccessor.java:379)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.closeConnection(DatasourceAccessor.java:367)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeConnection(DatabaseAccessor.java:402)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.afterJTSTransaction(DatasourceAccessor.java:100)
at oracle.toplink.essentials.threetier.ClientSession.afterTransaction(ClientSession.java:104)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.afterTransaction(UnitOfWorkImpl.java:1816)
at oracle.toplink.essentials.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:161)
at oracle.toplink.essentials.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:87)
at com.sun.ejb.containers.ContainerSynchronization.afterCompletion(ContainerSynchronization.java:174)
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:467)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
End of Stack Trace
|#]
RAR5035:Unexpected exception while destroying resource. To get exception stack, please change log level to FINE.
EJB5018: An exception was thrown during an ejb invocation on [DepartmentSessionBean]
javax.ejb.EJBException: Unable to complete container-managed transaction.; nested exception is: javax.transaction.SystemException
javax.transaction.SystemException
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:452)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

Means theres an error in XML/ABAP conversion probably due a syntax error...
Regards
Juan

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Error While calling remote object

[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'http://localhost:8080/Remote/messagebroker/amf'"]
This is the error I am getting when I am trying to call a method in java
This is java code
package demo;
public class Hello
public String sayHello()
System.out.println("1st Method is calledddddddd");
return "Hello World!";
public String sayHelloWithParam(String str){
System.out.println("2nd Method is calledddddddd");
return "You have typed "+str;
This is my mxml code
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
import mx.rpc.events.ResultEvent;
public function sayHello(event:ResultEvent):void{
label1.text=event.result.toString();
public function sayHelloWithParameter(event:ResultEvent):void{
label1.text=event.result.toString();
]]>
</mx:Script>
<mx:RemoteObject id="hello" destination="helloworldclass" fault="mx.controls.Alert.show(event.fault.toString())">
<mx:method name="sayHello" result="sayHello(event)"/>
<mx:method name="sayHelloWithParam" result="sayHelloWithParameter(event)"/>
</mx:RemoteObject>
<mx:Label x="55" y="51" text="Label" id="label1"/>
<mx:Button x="253" y="49" label="Button1" click="hello.sayHello()"/>
<mx:TextInput x="55" y="106" id="t1"/>
<mx:Button x="253" y="106" label="Button2" click="hello.sayHelloWithParam.send();"/>
</mx:Application>
When I click the button I am getting that error..
Please help me in solving this

Your server code must be faulty. If things work well you should see a blank screen when you point your browser to the amf endpoint.
An Apache message like "The requested resource (/bpm-backend/whatever) is not available." indicates that something in your server app is not working properly or not mapped right.

Error in call to loadpanel . Error Code: -94

Bonjour,
Sous cvi, quand je créé l'execultable, j'embarque l'UIR (Embed project.UIRs)
Si je deplasse le fichier.exe créé, le message suivant apparait :
Error in call to loadpanel. / Parent Panel Handle: 0 / Panel Resource ID: 1 / Error Code: -94 / File not found
Que signifie ce code '' -94 '' ?
Merci de votre aide
Cdlt
Hello,
Under CVI, when I build my project, I embed the UIR panel ( ''Embed project.UIRs'' )
When I mov the exe file created, thr error message appear :
Error in call to loadpanel. / Parent Panel Handle: 0 / Panel Resource ID: 1 / Error Code: -94 / File not found
Please, what is this error cod ?
Thanks in advance for you help
Regards

Dale;
That is happening because you probably installed the new version of NI-DAQ on the top of the old one, without uninstalling it first. Now, you will need to uninstall everything, clean the windows registry entries up, and install NI-DAQ 6.9.1 from scratch.
To unsitall the driver, go to Add/Remove programs, and to clean up the registry, type RegEdit in Start->Run, and go to HKWY_LOCAL_MACHINE->Software->National Instruments, and delete the NI-DAQ folders, if they are still there after you unistall everything.
Hope this helps.
Filipe

Error in call to LoadPanel

When I run my app at the target, I get an error (show stopper) that says (more or less)
Error in call to LoadPanel. Tsc_Setup_uir.uir, Panel Resource ID: 2, Error Code: -86. Callback function QuitLoginInstCB not known.
Background: I'm using LabWindows/CVI 7.1 and TestStand 3.1. I created a file called TSC_DLL_Export.h that contains all the routines called by my specifyModule(s) for each step in the TestStand Sequence. That .h file has a checkmark next to it in the CVI Build::Target Settings, Exports - Export What: Include File Symbols (click the Change button). Since I started seeing this error, I've tried adding to TSC_DLL_Export.h the callback in question, along with the other callback functions I noticed when I look at some of the buttons inside the Tsc_Setup_uir.uir file. I've also tried a variation where the TSC_DLL_Export.h contains just the Specify Module routines and in the Export What: Include File Symbols, I also checkmark the .h file for the uir file.
The .uir is listed in the TestStand workspace file and it's getting placed in the installation directory at the target, along with the other .UIR files, TestExec.exe, etc. I have other UIRs that have panels that get displayed just fine, but I don't think any of those have callbacks associated with them.
When I do a build, it's for a Release - Dynamically Linked Library. Any ideas?

hi mrbean,
You probable should be using should be using the LoadPanelEx function rather than the LoadPanel. Read the help for the LoadPanelEx for explanation.
If it a panel callback its going to look like:
int CVICALLBACK PanelCB (int panel, int event, void *callbackData,
int eventData1, int eventData2)
If it is a control callback its going to look like:
int CVICALLBACK ControlCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
Not sure what QuitLoginInstCB is a callback for.
But if you have exported it, an you are calling it from TestStand via the DLL adapter, then I dont see how your callback can work. Surely you will want a function that you call from TestStand which when loaded will run and load your panel, diaplay it, and Run the User Interface. Then Your Callback QuitLoginInstCB will come in to play when you press the required control.
For instance
TestStand step calls QuitLoginInst()
When the user panel is displayed and the User Interface is running.
User Presses the QuitLoginInst control which calls the QuitLoginInstCB(), this perform removing of the panel and QuitUserInterface() and thus allows QuitLoginInst() to complete and return to TestStand.
Here is a typical example of displaying a modal panel from TestStand (its uses TestStand Ver2.0 prototypes)
This is the function that will be called from TestStand
void __declspec(dllexport) TX_TEST DisplayModalDialog(tTestData *testData, tTestError *testError)
// Getting the Engine object from the Seq Context
TS_SeqContextGetProperty (testData->seqContextCVI, &errorInfo,
TS_SeqContextEngine, CAVT_OBJHANDLE,
&engine);
// Loading the interface panel into memory
panelHandle = LoadPanelEx (0, "ModalDialog.uir", PANEL, __CVIUserHInst);
// TS_StartModalDialog function causes the dialog box to be modal
// with respect to the application that created the TestStand
// Engine object you specify (i.e. Seq Editor or Oper Interface)
TS_StartModalDialog (engine, &errorInfo, &modalData);
// Displays and activates a panel as a modal dialog box.
InstallPopup(panelHandle);
// RunUserInterface() runs the User Interface and issues events to
// callback functions.
RunUserInterface();
Error:
// If an error occurred, set the error flag to cause a run-time error in TestStand.
if (error < 0)
testError->errorFlag = TRUE;
CA_DiscardObjHandle(engine);
return;
This is the Callback function that is assigned to the Quit button in the UIR
int CVICALLBACK Quit (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2){
switch (event)
case EVENT_COMMIT:
// Removes either the active pop-up panel or all pop-up panels.
RemovePopup(panelHandle);
// Causes RunUserInterface() to return.
QuitUserInterface(0);
// Call this function after you discard or hide the dialog box
// panel
TS_EndModalDialog(&errorInfo, &modalData);
// Removes a panel and any of its child panels from memory and
// clears them from the screen if visible
DiscardPanel (panelHandle);
// This function releases resources associated with the object and
// calls the Release method of the Automation server object.
CA_DiscardObjHandle(engine);
break;
return 0;
Finally you dont need the LIB file on your target system, this is only required to build your EXE | DLL file.
You have dont need to have a H file. If in your CVI setting, in the Target Setting, if the 'Export What' control is set to 'Symbols Marked for Export', then you dont need an H file, but you probably will have a H file because you have an UIR file but you dont what to export the callback function within that H file as you would not be calling them direct from some external process. ( the example above comes from a project which has an include file for the UIR and the Target Settings are set for Symbols Marked for Export.)
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

Error in calling External web service from soa suite 11.1.1.3

Hi
I am getting following error while calling external web service......
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.integration.platform> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866047> <SOA-20136> <WS Binding: exception durign SOAP invocation: java.util.NoSuchElementException>
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.soa.mediator.common> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866047> <BEA-000000> < Payload after BaseActionHander.requestMessage :{parameters=oracle.xml.parser.v2.XMLElement@bd2382}>
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.soa.mediator.common> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866063> <BEA-000000> < Properties after BaseActionHander.requestMessage :{ReferenceInstance=[email protected]63ea5,
####<Jan 20, 2011 6:54:29 PM IST> <Error> <oracle.webservices.service> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529869375> <OWS-04115> <An error occurred for port: FabricProvider: javax.xml.rpc.soap.SOAPFaultException: oracle.fabric.common.FabricInvocationException.>
I am able to hit external ws from soap ui and getting response but while calling from soa suite getting this error.
Any clues?
Thanks
Vibhor

WS Binding: exception durign SOAP invocation: java.util.NoSuchElementException
Looks like the error is in the data sent to or expected from the service in your composite. Check that audit logs and composite flow to make sure your soap message when using soapui matches what you are working with in soa suite.

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

Need Help in expdp for resolving ORA-39127: unexpected error from call

Hi All,
My Environment is -------> Oracle 11g Database Release 1 On Windows 2003 Server SP2
Requirement is ------------> Data Pump Jobs to be completed without any error message.
I am tryring to take export data pump of a schema
Command Used --> expdp schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Export Log Show this details its completed with 2 error messages
Export: Release 11.1.0.6.0 - Production on Saturday, 23 April, 2011 13:31:10
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP option
FLASHBACK automatically enabled to preserve database integrity.
Starting "SYSTEM"."SYS_EXPORT_SCHEMA_01": system/******** schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 192 KB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',0,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',1,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980
. . exported "SCOTT"."DEPT" 5.945 KB 4 rows
. . exported "SCOTT"."EMP" 8.585 KB 14 rows
. . exported "SCOTT"."SALGRADE" 5.875 KB 5 rows
. . exported "SCOTT"."ACCTYPE_GL_MAS" 0 KB 0 rows
. . exported "SCOTT"."BONUS" 0 KB 0 rows
Master table "SYSTEM"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_SCHEMA_01 is:
D:\APP\ADMINISTRATOR\ADMIN\SIPDB\DPDUMP\SCORR.DMP
Job "SYSTEM"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 13:40:08
Please help me to resolve this issue.
Thank you,
Shan

Hi Shan,
I am getting very similar to yours
"ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found."
error message while creating OLAP Analytic Workspace with AWM.
I am creating workspace for the first time, actually following some tutorial to get some knowledge about OLAP)
I see you managed to solve you problem.
I wonder how I can get this MOS DOC 852794.1 - is it possible to get it without going to Metalink?
Thanks in advance for any help.
Regards,
SC

Operation not found error while calling AM methods from managed bean

Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
Satya

Hi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan

Error while calling WebService inside ISchedulerTask.

Hi,
Env: NW 2004s
I have a requirement of calling webservice frequently. I developed a portal project with scheduler, where the application gives a runtime error while calling/reading the property file (which is generated during the webservice proxy generation, without it webservice call is impossible).
I have varified the ear file which contains all the required class files and config files including property file.
fyi:
portalapp.xml file looks like this.
+
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
 <property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
</application-config>
<components/>
<services>
 <service name="RFServiceWrapper">
 <service-config>
 <property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
 <property name="startup" value="true"/>
 </service-config>
 </service>
</services>
</application>
+
Any input will be highly appreciated.
Thanks,
Vinod

Following is the error message:
msg1:
at <package>.AFFERAAFWSServiceImpl.<init>(AFFERAAFWSServiceImpl.java:10)
msg2:
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ServiceBase.loadProtocolsFromPropertyFile(ServiceBase.java:238)
Reporting from Logs and Traces.
Error Located @ following code inside AFFERAAFWSServiceImpl.java, which is a proxy class generated using apache axis
input = this.getClass().getClassLoader().getResourceAsStream("<package>/protocols.txt");
loadProtocolsFromPropertyFile(input);
protocols.txt is another config file generated along with AFFERAAFWSServiceImpl.java, which is been used @ run time.
FYI: All these files are present on ear file.

Error in calling BADI

Similar Messages

Maybe you are looking for