Error in calling stored procedure in sender JDBC adapter
Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.
Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan
Similar Messages
-
Error while executing the stored procedure through sender JDBC adapter
Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Rameshhi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh -
Executing an Oracle Stored Procedure from Sender JDBC adapter
I could really use some help from someone who had done this before.
I've read the help about using the JDBC sender adapter, but it's not helping enough.
I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
That's definately what we want to do, but we can't figure out the syntax.
The procedure in oracle looks like this:
CREATE OR REPLACE PROCEDURE test_ref_cursor
( cur_generic IN OUT result_sets.cur_generic)
as
BEGIN
Open cur_generic for
select
proposal_number,
to_char(sequence_number),
column_name,
column_value,
update_timestamp,
update_user
from
coeus.sap_test;
END test_ref_cursor;
And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure? Or is there something wrong with the procedure that is causing the error?
<i>I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.</i>Hi Vanda,
Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
There are 2 possible ways you can accomplish this:
1. Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
2. Develop a user-module for the adapter, which can be used with a sender adapter.
Thanks
Prasad -
Stored procedure in Sender JDBC Adapter
Hi All,
My Scenrio goes like this ...
Stored Procedure(SQL Server) --- PI -
File
I need to write the results of stored procedure to File.Here I don't need any mapping.So how many DT , MT and MI need to be created?
The interface need to run by 6AM from Monday to Thrusday, how can i achieve this ?
Stored Procedure has only select statement and no Update statement , but it takes Date as Input parameter , so what i need to provide in sender JDBC adapter.
Thanks,
MonishHi Monish,
As per your requirement it is JDBC to File. Please be careful with the structure to be created for sender JDBC. I am unable to understand why you donot require a mapping for this. How XI will send the data to a file then.As per my knowledge if it's file to file and just pick and drop then we can neglect IR and go for ID.But here you are working with JDBC and File so you will be in need of it.
IR:
DT: 2
JDBC_Sender_DT
File_Output_DT(Optional)
You can use the JDBC sender data type structure for File output also.
MT as per your DT
MI:2
Outbound MI: JDBC structure
Inbound MI : File structure
MM: 1
IM: 1
ID as similar to other scenarios.All 1 objects for RD,ID,Sender Agreement and Receiver Agreement.
Sender JDBC channel:
Query: Select * from table where date
But I have a query how are you providing date in input paramerter.It will be dynamically entered into the query right.
You can mention the Avalibility planning for your interface to work in RWB.
Go to RWB>Component Monitoring>Adapter Engine->Communication Channel Monitoring>Avaliablity Planning
Please explain.
Regards,
Nutan -
How to use Stored Procedures in Sender JDBC Adapter.
Hi Experts,
we are having a lot of legacy application which are on .Net. basicaly using MS SQL & stuff. As a Integration scenario we have to triggered some events from JDBC to XI. How can i do this. Secondly there are multiple tables from which i will be selecting a record & sending it to XI for further processing the Receiver Side we are having SAP system.
How can i use a Stored procedure in XI Sender Adapter ?
Can anybody tell me step by step how to get the XSD of Stored procudere & used in XI. ?
I am new to XI. I have not yet configured any sceneario.
Can anybody guide me step by step how to do this.
I am only intersted in Sender Side configuration.
Regards,
UmeshHey,
check this in the JDBC Sender Adapter Configuration
Query SQL Statement -> Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
JDBC adapter
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b> -
Parameters to stored procedure from sender JDBC
Hi,
I am using the JDBC sender adapter to call the Oracle stored procedure. Oracle version is 10.2. hence I m using function call using select.
My concern is, how to pass the input parameter to Oracle function from JDBC sender.
Regards,
KavitaHi Kavita,
<i>I am using the JDBC sender adapter to call the Oracle stored procedure</i>
<i>Unfortunately, the sender JDBC adapter does not support Oracle's stored procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.</i>
Executing an Oracle Stored Procedure from Sender JDBC adapter
[Not sure about latest versions of Oracle]
<i>can I pass the input parameter to this function? </i>
In my opinion, No
<i>If not, I need to change the approach, and need to use receiver JDBC[as need to pass input parameter]. </i>
This could be possible but havent tried it
<i>Can JDBC Receiver adapter support stored procedure for Oracle[10.2]</i>
Yes
Regards,
Prateek -
Stored Procedure in sender JDBC
Hey all,
I am trying to call a stored procudure in my sender JDBC adapter to send to an Idoc adapter. In the query statement, do I need to give just EXECUTE <stored proc name> or do I need to set up any special setting in the sender adapter?
-TeresaTeresa,
Which DB are you trying to access?
If it is an oracle DB, then unfortunately, Sender JDBC adapter does not support stored procedures for an Oracle DB.
Reason is that JDBC adapter expects a RESULTSET while Oracle Stored Procedure returns a Cursor.
For any other DB, EXECUTE <STOREDPROCNAME> will suffice.
Regards,
Bhavesh -
JCA Error while calling Stored Procedure containing cursors in BPEL/OSB
Hi,
I created JCA DBAdapter in Jdeveloper for calling remote stored procedure which contains cursors as OUT parameters.
I'm getting below exception when i try to call the database via BPEL/OSB.the same remote procedure call is working on Invoking with WLI .
Kindly sugggest !!!
The invocation resulted in an error: I*nvoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/ServiceBus/BusinessServices/IsdnSiebelConn [ IsdnSiebelConn_ptt::IsdnSiebelConn(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'IsdnSiebelConn' failed due to: Get object error.*
Error retrieving the value of a parameter R_NON_CNF_ATTR_CURSOR.
An error occurred when retrieving the value of parameter R_NON_CNF_ATTR_CURSOR after invoking the SIEBEL.ISDN_OBT_INS_DET.OBTAINASSETDETAILS API. Cause: java.sql.SQLException: Cursor is closed.
*; nested exception is:*
BINDING.JCA-11810
Get object error.
Error retrieving the value of a parameter R_NON_CNF_ATTR_CURSOR.
An error occurred when retrieving the value of parameter R_NON_CNF_ATTR_CURSOR after invoking the SIEBEL.ISDN_OBT_INS_DET.OBTAINASSETDETAILS API. Cause: java.sql.SQLException: Cursor is closed.
Check to ensure that the parameter has been correctly registered as a valid IN/OUT or OUT parameter of the API. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/ServiceBus/BusinessServices/IsdnSiebelConn [ IsdnSiebelConn_ptt::IsdnSiebelConn(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'IsdnSiebelConn' failed due to: Get object error.
Error retrieving the value of a parameter R_NON_CNF_ATTR_CURSOR.
An error occurred when retrieving the value of parameter R_NON_CNF_ATTR_CURSOR after invoking the SIEBEL.ISDN_OBT_INS_DET.OBTAINASSETDETAILS API. Cause: java.sql.SQLException: Cursor is closed.
; nested exception is:
BINDING.JCA-11810
Get object error.
Error retrieving the value of a parameter R_NON_CNF_ATTR_CURSOR.
An error occurred when retrieving the value of parameter R_NON_CNF_ATTR_CURSOR after invoking the SIEBEL.ISDN_OBT_INS_DET.OBTAINASSETDETAILS API. Cause: java.sql.SQLException: Cursor is closed.
Check to ensure that the parameter has been correctly registered as a valid IN/OUT or OUT parameter of the API. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:153)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy127.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:377)
at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_1033_WLStub.invoke(Unknown Source)
at com.bea.alsb.console.test.TestServiceClient.invoke(TestServiceClient.java:174)
at com.bea.alsb.console.test.actions.DefaultRequestAction.invoke(DefaultRequestAction.java:117)
at com.bea.alsb.console.test.actions.DefaultRequestAction.execute(DefaultRequestAction.java:70)
at com.bea.alsb.console.test.actions.ServiceRequestAction.execute(ServiceRequestAction.java:143)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)You need to open all the cursors in the PLSQL ie., cursors should be initialized in your PLSQL package. JCA DB Adapter tries to open the cursor without checking whether its there or not..If you cant change the PLSQL package, raise a SR with Oracle for a patch.This would be considered as Enhancement Request.
Regards
Sesha -
Error while calling stored procedure from Java
Hi Guys,
How are you everybody? I hope everything is goin fine on your side. I have one issue in PL/SQL while calling below stored procedures from Java.
Problem Description: We have a stored procedure PROCEDURE BULK_INSERTS (
V_SESSION_ID_TAB IN T_SESSION_ID_TAB_TYPE,
V_SERVICE_TYPE_TAB IN T_SERVICE_TYPE_TAB_TYPE,
V_SERVICE_LOCATION_TAB IN T_SERVICE_LOCATION_TAB_TYPE,
V_SERVICE_CALL_NAME_TAB IN T_SERVICE_CALL_NAME_TAB_TYPE,
V_SERVICE_CALL_START_TIME_TAB IN T_SERVICE_CALL_ST_TAB_TYPE,
V_SERVICE_CALL_END_TIME_TAB IN T_SERVICE_CALL_ET_TAB_TYPE,
V_SERVICE_CALL_DURATION_TAB IN T_SERVICE_CALL_DUR_TAB_TYPE,
V_STATUS_TAB IN T_STATUS_TAB_TYPE,
V_NOTES_TAB IN T_NOTES_TAB_TYPE
) and we are getting ora errors while calling this stored procedure from java.
All tab types are declared locally, at package level.
Here is error which occur while calling this sp:
{call BULK_PKG.BULK_INSERTS(?,?,?,?,?,?,?,?,?)}
And the parameter types we are using are:
SESSION_ID - NUM_TAB_TYPE
SERVICE_TYPE - VAR_TAB_TYPE
SERVICE_LOCATION - VAR_TAB_TYPE
SERVICE_CALL_NAME - VAR_TAB_TYPE
SERVICE_CALL_START_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_END_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_DURATION - NUM_TAB_TYPE
STATUS - VAR_TAB_TYPE
NOTES - VAR_TAB_TYPE
And the Exception stack trace is:
ERROR (com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServi
ceCallDAO.java:143)@ExecuteThread: '252' for queue: 'weblogic.kernel.Default') {Error attempting to save collected ESC data}
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.doBulkInsert(ExternalServiceCallDAO.java:220)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServiceCallDAO.java:138)
Please help my guys out of this. I will really appreciate all suggestions and advices.
Thank you everybody.I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you -
Facing syntax error while calling stored procedure
hi
iam calling a stored procedure which is a sybase USP.my code is as follows
clsm3=CommonLib.cnClient.prepareCall("{call SYB1103.SIFGSYS..USP_Ins_ShipmentInvLines_Tmp "+coid+",'"+invclass+"',"+newsysno+","+productcd+",'"+batchno+"',"+qty+","+productrate+","+assrate+","+expercent+","+examt+","+saleed+","+bonused+",'"+recby+"',"+linestat+","+brno+","+prinvno+","+invno+","+recno+"}");
clsm3.executeUpdate();
where clsm3 is an object of CallableStatement.but it is giving me a syntax error saying
"Invalid JDBC escape syntax at line position 84 '}' character expected"
please reply as soon as possibleclsm3=CommonLib.cnClient.prepareCall("{call
{call SYB1103.SIFGSYS..USP_Ins_ShipmentInvLines_Tmp
"+coid+",'"+invclass+"',"+newsysno+","+productcd+",'"+
batchno+"',"+qty+","+productrate+","+assrate+","+exper
cent+","+examt+","+saleed+","+bonused+",'"+recby+"',"+
linestat+","+brno+","+prinvno+","+invno+","+recno+"}")
;clsm3=CommonLib.cnClient.prepareCall("call <PROCEDURE_NAME>(?,?,?,....)
clsm3.setString(1,coid);
clsm3.setInt(2,invclass);
and so on...
Try the above. The syntax of the call is wrong in your code. -
Error in calling Stored procedure returns REFCURSOR
Hi,
I've written a oracle stored procedure returning REFCURSOR. say,extractorderdespatchconfirmsp('','','','','','H1','ACG','','','','',:rc).
Following statement throwing error.
CallableStatement cs = con.PrepareCall("{extractorderdespatchconfirmsp('','','','','','H1','ACG','','','','',:rc)}");
rs = cs.executeQuery();
Could you rectify this problem and give me the currect code.
riyazYour naming convention leaves a little to be desired.
String command = "{CALL extractorderdespatchconfirmsp(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}";
CallableStatement cstmt = conn.prepareCall(command);
//set the variables here ie, dates need to be a timestamp format. use set timestamp.
cstmt.setInt(1, 2);
cstmt.setString(2, "a string");
cstmt.setInt(3, 0);
//for return values
cstmt.registerOutParameter(3, Types.INTEGER);
cstmt.registerOutParameter(2, Types.INTEGER);
cstmt.execute();
int status = cstmt.getInt(3);
int status2 = cstmt.getInt(2);
cstmt.close();
It took me awhile too to get JDBC to call these right. -
Error while calling stored procedure from apps adapter
Hi,
I am calling Oracle applications standard api to create ar invoice (XX_BPEL_TEST_APPS_ADAPTER_PKG is the name of wrapper package created by adapter) from apps adapter but getting the following error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'test_apps_adapter' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG.AR_INVOICE_API_PUB$CREATE_SIN API. An error occurred while preparing and executing the APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG.AR_INVOICE_API_PUB$CREATE_SIN API. Cause: java.sql.SQLException: ORA-06531: Reference to uninitialized collection ORA-06512: at "APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG", line 199 ORA-06512: at "APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG", line 909 ORA-06512: at line 1 Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6531" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Just wondering if anyone has faced a similar problem?I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you -
Getting error when calling stored procedure
I have created 2 stored procedures as follows
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[REAL_PUSH_UPDATE_REPORTS] AS
BEGIN TRANSACTION
DECLARE @cursor_contact_id bigint;
DECLARE cursorContactId Cursor FOR SELECT distinct(contact_id) FROM [dbo].credit_reports WHERE loan_id IS NULL;
OPEN cursorContactId;
Fetch NEXT FROM cursorContactId INTO @cursor_contact_id;
IF(@@FETCH_STATUS <> 0)
PRINT 'There are no LOAN contacts are there with loan ID null, May be you have already executed this procedure'
WHILE(@@FETCH_STATUS =0)
BEGIN
PRINT @cursor_contact_id;
EXECUTE REAL_UPDATE_REPORTS @cursor_contact_id;
Fetch NEXT FROM cursorContactId INTO @cursor_contact_id
END
CLOSE cursorContactId;
DEALLOCATE cursorContactId;
IF (@@Error = 0)
BEGIN
COMMIT TRANSACTION;
END
ELSE
BEGIN
ROLLBACK TRANSACTION;
END
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[REAL_UPDATE_REPORTS] @initial_contact_id bigint AS
BEGIN TRANSACTION
DECLARE @loan_count bigint;
DECLARE cursorLoanID Cursor FOR (SELECT l.loan_id loanIDList FROM (([dbo].loans l LEFT OUTER JOIN [dbo].loan_requests lr
ON lr.loan_id=l.loan_id
AND lr.contact_id = l.primary_borrower_id)
LEFT OUTER JOIN [dbo].loan_codes lc
ON l.loan_code_id = lc.loan_code_id)
WHERE (l.primary_borrower_id=@initial_contact_id)
AND l.active=1 UNION SELECT l.loan_id
FROM [dbo].loans l LEFT OUTER JOIN [dbo].loan_requests lr
ON lr.loan_id=l.loan_id LEFT OUTER JOIN [dbo].contacts c
ON c.contact_id =l.primary_borrower_id
WHERE (l.loan_id IN
(SELECT cb.loan_id FROM coborrowers cb where contact_id =@initial_contact_id and active = 1))
UNION
SELECT l.loan_id
FROM [dbo].loans l LEFT OUTER JOIN [dbo].loan_requests lr
ON lr.loan_id=l.loan_id LEFT OUTER JOIN [dbo].contacts c
ON c.contact_id =l.primary_borrower_id
WHERE (l.loan_id IN (SELECT cs.loan_id
FROM cosigners cs where contact_id =@initial_contact_id and active = 1)) UNION
SELECT g.loan_id FROM [dbo].groups g, [dbo].group_members gm,
[dbo].loan_requests lr WHERE gm.group_id = g.group_id
AND lr.loan_id = g.loan_id
AND lr.contact_id = gm.secondary_borrower_id
AND gm.secondary_borrower_id=@initial_contact_id and gm.active = 1)
ORDER BY loanIDList DESC;
OPEN cursorLoanID;
SET @loan_count = @@CURSOR_ROWS;
PRINT @loan_count;
IF(@loan_count > 0) BEGIN
DECLARE @loans_loan_id bigint;
Fetch NEXT FROM cursorLoanID INTO @loans_loan_id;
DECLARE @my_count bigint;
SET @my_count=1;
WHILE(@@FETCH_STATUS =0)
BEGIN
DECLARE @temp_contact_id bigint;
DECLARE @temp_loan_id bigint;
SET @temp_contact_id = @initial_contact_id;
SET @temp_loan_id = @loans_loan_id;
IF(@my_count=@loan_count)
BEGIN
UPDATE [dbo].credit_reports SET loan_id = @temp_loan_id WHERE
loan_id IS NULL AND contact_id = @initial_contact_id
AND NOT EXISTS (SELECT * FROM [dbo].credit_reports
WHERE contact_id = @initial_contact_id AND
loan_id=@temp_loan_id);
END
ELSE
BEGIN
INSERT INTO [dbo].credit_reports(contact_id,credit_bureau_id, credit_score, thirty_days_late,
sixty_days_late, ninety_days_late, currently_negative, amount_past_due,
inquiries_six_mos, public_records, collections, total_accounts_balance,
total_mthly_pymts, report_file, report_gu_id, data_entry_by, data_entry_date,
loan_id) SELECT contact_id,credit_bureau_id, credit_score, thirty_days_late,
sixty_days_late, ninety_days_late, currently_negative, amount_past_due,
inquiries_six_mos, public_records, collections, total_accounts_balance,
total_mthly_pymts, report_file, report_gu_id, data_entry_by,
data_entry_date,@temp_loan_id FROM [dbo].credit_reports WHERE contact_id
= @initial_contact_id AND loan_id IS NULL
AND NOT EXISTS (SELECT * FROM
[dbo].credit_reports WHERE contact_id=@initial_contact_id AND
loan_id=@temp_loan_id);
END
Fetch NEXT FROM cursorLoanID INTO @loans_loan_id;
SET @my_count = @my_count + 1;
END
close cursorLoanID
deallocate cursorLoanID
IF (@@Error = 0)
BEGIN
COMMIT TRANSACTION;
PRINT 'Success for contactID :'+CONVERT(varchar(50),@initial_contact_id);
END
ELSE
BEGIN
ROLLBACK TRANSACTION;
PRINT 'Failed for contactID :'+CONVERT(varchar(50),@initial_contact_id);
END
END
ELSE
BEGIN
ROLLBACK;
PRINT 'NO Loans For the contactID :'+CONVERT(varchar(50),@initial_contact_id);
ENDnow the problem is
i have executed 2 procedures saperately thn its ok while im calling im getting
Msg 16915, Level 16, State 1, Procedure REAL_UPDATE_REPORTS, Line 5
A cursor with the name 'cursorLoanID' already exists.
Msg 16905, Level 16, State 1, Procedure REAL_UPDATE_REPORTS, Line 6
The cursor is already open.Please let me know the reason...
Thank you.
Message was edited by:
User71408What the heck, that's fun..
I for one, have never seen T-sql or whatever it's called.
Looking at it, it seems that a
close cursorLoanID
deallocate cursorLoanID
is missing from the ELSE section doing the rollback.
But, only guessing
Fun, fun, fun -
Error in calling stored procedure
PROBLEM RESOLVED !!! PLEASE IGNORE
THANKS
Hi i am a newbie. I am trying to call a stored procedure but landed up with error.
calling like :
CallableStatement callStmt = objDBHandler1.getCallableStatement("{call PKG.calc_sa_premium(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}");
Error :
00:34:33,031 INFO [STDOUT] before prepare call callable stmt is =========>{call PKG.calc_sa_premium(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
00:34:33,031 ERROR [STDERR] java.lang.NullPointerException
00:34:33,031 ERROR [STDERR] at com.db.DBHandler1.getCallableStatement(DBHandler1.java:199)
00:34:33,031 ERROR [STDERR] at com.team.bi.calculator.execute(calculator.java:168)
00:34:33,031 ERROR [STDERR] at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
00:34:33,031 ERROR [STDERR] at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
00:34:33,031 ERROR [STDERR] at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
00:34:33,031 ERROR [STDERR] at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
00:34:33,031 ERROR [STDERR] at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
00:34:33,031 ERROR [STDERR] at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
00:34:33,031 ERROR [STDERR] at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
00:34:33,031 ERROR [STDERR] at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
00:34:33,031 ERROR [STDERR] at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)
00:34:33,031 ERROR [STDERR] at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
00:34:33,031 ERROR [STDERR] at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
00:34:33,031 ERROR [STDERR] at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
00:34:33,031 ERROR [STDERR] at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
00:34:33,031 ERROR [STDERR] at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
00:34:33,031 ERROR [STDERR] at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
00:34:33,031 ERROR [STDERR] at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
00:34:33,031 ERROR [STDERR] at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
00:34:33,031 ERROR [STDERR] at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
00:34:33,031 ERROR [STDERR] at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
00:34:33,031 ERROR [STDERR] at java.lang.Thread.run(Unknown Source)
00:34:33,031 INFO [STDOUT] Error in calling Procedure while getting Total Premium:java.lang.NullPointerException
Please let me know if you have any clue.
Thanks
Edited by: newbie123 on Nov 29, 2009 1:59 PM
Edited by: newbie123 on Nov 29, 2009 1:59 PMyes,
here is the code
callStmt.setString(1,aa);
callStmt.setString(2,bb);
callStmt.setString(3,cc);
callStmt.setInt(4,dd);
callStmt.setInt(5,ee);
callStmt.setString(6,ff);
callStmt.setString(7,gg);
callStmt.setString(8,hh);
callStmt.setDouble(9,ii);
callStmt.setString(10,jj);
callStmt.setString(11,kk);
callStmt.setInt(12,ll);
callStmt.setString(13,mm);
callStmt.setInt(14,nn);
callStmt.setString(15,oo);
callStmt.setString(16,pp);
/* callStmt.registerOutParameter(17, OracleTypes.CURSOR);
callStmt.registerOutParameter(18, OracleTypes.CURSOR);
callStmt.registerOutParameter(19, OracleTypes.CURSOR);
callStmt.registerOutParameter(20, OracleTypes.CURSOR);
callStmt.registerOutParameter(21, OracleTypes.CURSOR);
callStmt.registerOutParameter(22, OracleTypes.CURSOR);*/
callStmt.registerOutParameter(17,OracleTypes.NUMERIC);//prem
callStmt.registerOutParameter(18,OracleTypes.NUMERIC);//st
callStmt.registerOutParameter(19,OracleTypes.NUMERIC);//tp
callStmt.registerOutParameter(20,OracleTypes.NUMERIC);//sa
callStmt.registerOutParameter(21,OracleTypes.VARCHAR);//text
callStmt.registerOutParameter(22,OracleTypes.VARCHAR);//text1 -
Error while fetching Stored procedure from JDev DB Adapter
Hello
I am facing a problem while configuring stored procedures from Jdeveloper using DB Adapter. I am using Sql Server 2005 as my database,Jdeveloper version is 10.1.3.1.Bpel Version is 10.1.3.3. Connection to the Sqlserver 2005 database is fine, but it shows only views and tables. I get the following error message when I try to add the sql stored procedure call
"An error occured while obtaining the database schemas.Verify that the database connection is valid , and is supported"
Can someone help me please.
Thanks,
Phani
Edited by: Phani on Oct 28, 2008 11:30 AMI think you have two problems here. First, JDeveloper 10.1.3.1 doesn't support SQL Server stored procedures. There is a command-line utility that you can use to generate the required BPEL artifacts (WSDL and XSD). Second, you're using a 10.1.3.1 design-time with a 10.1.3.3 runtime. These are not compatible so you will likely run into namespace issues when you try to run your BPEL processes. You should upgrade your JDeveloper to 10.1.3.3. JDeveloper will support third-party databases in 11.1.1 including SQL Server 2005 (but not 2000), IBM DB2 v8.x and v9.x, DB2 AS/400, and MySQL. JDeveloper will support MySQL v5.2.6 and above because the INFORMATION_SCHEMA.PARAMETERS table was added at that time. The PARAMETERS table does not exist in MySQL versions prior to v5.2.6 so you will have to use the command-line utility.
Maybe you are looking for
-
Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs. can't get any further - Tried all suggestions like clearing browser caches but no change. Got a couple of projects i wanted
-
Hi..I am pretty new to the world of ABAP. I have the following task. I need to right a function module that will be responsible for renaming files on the R/3 system (to a certain predefined format). Basically, I am thinking that FM will import/accept
-
Universe created from a Ms Excel sheet --
Hi Good Morning, I created One webi report in BO .Now i want to create a universe from MS Excel File .Please tell me step by step Process . Thanks In Advance Praveen Kumar Yagnamurthy.
-
Advice about my macs cd drive ??
hi all, basically i have had my mac for about a year and a half and im haveing problems with the drive. if i put a disc in it will read the disc fine but when i go to eject the disc it sounds like its going to eject but then starts to read the disc a
-
HT5312 I forgot the answer to the secret question. Help me
I forgot the answer to the secret question