Error in calling up application Appraisal document

Good Morning.
We are implementing Appraisals for ESS and MSS with BP 1.41. We are
working ECC 604.
We are following the information of help.sap for configure this component.
We did the following setting in the customizing.
  1.      In Customizing, choose Cross-Application Components ® Homepage
Framework ® Areas ® Services ® Assign Services to Subareas.
       2.      Delete the following:
○       Subarea key EMPLOYEE_CAREER_SUB_TM_PM_14
○       Service key EMPLOYEE_CAREER_APPRAISAL_PMP_14
○       Item 10
       3.      Add the following:
○       Subarea key EMPLOYEE_CAREER_SUB_TM_PM_14
○       Service key EMPLOYEE_CAREER_APPRAISAL_WD_UI_14
○       Item 10
After completing these steps, the Employee portal role is actively
assigned to the Appraisal Documents iView
(com.sap.pct.erp.ess.14.documents_ee) in the Job and Career area.
Other activity that we did was active the WD ABAP using the T.Code SICF.
However the system is display the following message of error that attach.
[Step One|http://www.freeimagehosting.net/uploads/8bfb44c773.jpg[/img]
[Steps two|http://www.freeimagehosting.net/uploads/5ab82e17e5.jpg[/img]
We have not made any parameterization in the portal.
We want know What is cause of this error?
Kind Regards.

close this duplicate

Similar Messages

  • Error on Flexible Performance Management Appraisal Document

    Hello Experts,
    We are in the process of building Performance Management using Enhancement Package 4 in ECC 6.0. I am having issues with getting the Appraisal Document to work for MSS. Just to clarify too, I have no experience with Performance Management and the fact that we are using Enhancement package 4, our Functional consultants are not sure what to expect either. One more thing, the SICF service is activated.
    *) When trying to preview the Appraisal Document (com.sap.pct.erp.mss.hap_document), I am receiving a Portal Run Time error.
    *) When I go into SE80, I am using Package u2018PAOC_HAP_DOCUMENT_WD_UIu2019 to run a test on Web Dynpro Application HAP_MAIN_DOCUMENT, I am receiving u2018Access via 'NULL' object reference not possible.u2019
    *) When I go into SE80, I am using Package u2018PAOC_HAP_DOCUMENT_WD_UIu2019 to run a test on Web Dynpro Configuration HAP_AC_MAIN_DOC, I am receiving u201Cu2018Error in Calling Up Applicationu2019 The Web Dynpro application was called up with the wrong URL parametersu201D.
    QUESTIONS:
    1) Do I have to implement Generic Performance Management (com.sap.pct.erp.mss.14.generic_performance_management) to call the appraisal document?
    2) Is there any special configuration that needs to be done to make the HAP_MAIN_DOC work (portal or R/3)?
    3) Do I need to manually create an SICF service for this?
    4) Is there any documentation on how to implement the Flexible?
    Any direction would be appreciated.
    Thank you,
    Mike

    Hello H2R,
    I copied the Iview Generic Performance Management (com.sap.pct.erp.mss.14.generic_performance_management) with Application Name 'HAP_START_PAGE_POWL_UI_MSS' and the Application Configuration Name 'HAP_START_PG_POW_MSS_AC'.
    Activated the SICF services of 'hap_main_document', 'HAP_START_PG_POW_MSS_AC', 'HAP_START_PAGE_POWL_UI_MSS. Also, I would activate the services that begin with 'HAP' that l thought that I would need.
    In SE80, there are 2 locations to find these Applications: 1) Web Dynpro Comp./Intf. = FPM_OIF_COMPONENT and 2) Package = PAOC_HAP_DOCUMENT_WD_UI.
    As for the notes, we are on SAPK-60420INEAHRGXX, these are the notes that we applied:
    1468466 - PM Launchpad Config
    1463821 - PM Portal Config
    1416756 - OBN Config in PM
    1408243 - Config for OBN
    Hope this helps,
    Mike

  • Getting 500 internal server error when calling IIS application in portal

    Hello All,
    We have setup to access IIS application from portal http server. We have setup proxy rules in portal http server. When we are accessing the link of IIS,we are getting 500 internal server error.
    In the sso log file,we are getting the below error.
    [ERROR] AJPRequestHandler-ApplicationServerThread-17 Unexpected Exception received
    java.lang.NullPointerException
    at oracle.security.sso.server.policy.FilePolicyManager.getAuthLevel(FilePolicyManager.java:325)
    at oracle.security.sso.server.auth.AuthDirector.getAuthLevel(AuthDirector.java:199)
    at oracle.security.sso.server.ui.SSOLoginServlet.doPost(SSOLoginServlet.java:316)
    at oracle.security.sso.server.ui.SSOLoginServlet.doGet(SSOLoginServlet.java:278)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
    at java.lang.Thread.run(Thread.java:534)
    Please advise.
    Thank you,
    Vijay

    Question:
    Do you have to sign on to the IIS application?
    Or are you just trying to link to it?

  • Appraisal Document Error in ERP6 EHP6 and Portal 7.3

    Dear All,
    I am on ECC6 EHP6 and Portal 7.3 and using WDA ESS and MSS business packages. I have gone through all the below notes:
    1600380 - Appraisal Document does not open in portal
    1468466 Performance Management Launchpad Configuration
    1463821 Performance Management Portal Configuration
    1416756 OBN Configuration in Performance Management
    1408243 Configuration for object-based navigation
    But since I an using Webdynpro ABAP package for ESS I dont have the below path in Portal:
    portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.14.bp_folder/com.sap.pct.erp.ess.14.pages/com.sap.pct.erp.ess.14.career_job
    I am getting the attached error while accessing Appraisal Document in Portal. Also when checked in SE80 its giving the same error.
    Kindly help.
    Thank you,
    Regards,
    Disha.

    Hello disha,
    This issue (Error in Calling Up Application) is a common issue and SAP Note 1600380 was created to address this.
    1) Keep in mind your custom environment, please pay attention to the following comment in the Note:
      "Note: this document has been created based on standard ESS and MSS roles. If you have copied the standard content to customer specific roles you will have to adapt them accordingly."
    2) Remember to test each role independently, this is because OBN will resolve with the first available navigation found:
      "Recommendations: in order to set up the navigation it is better that  you first solve it independently for each role. So first just assign the ESS role to your user and Content Administration role. Once it is working, proceed with MSS role (in that case remove ESS role and
      assign MSS plus Content Admin)."
    3) After checking all the customizing, please pay special attention to the "further checks" section:
       3.1)
       "Check note 1352104 - OBN action's Business Parameters don't  reach AI' is implemented. This note corrects an issue with parameters not correctly passed in POST."
       In order to check this, go through your ComponentInfo Page and check  the version of your EP-PSERV component. For instance:
    EP-PSERV  7.01 SP3 (1000.7.01.3.1.20090302142421)
    This is the patch level:        ^
    So, in this case you would have:
    EP-PSERV: 7.01
    SP: 3
    Patch level: 1
    The problem for the non-working OBN link, could be a mixed protoco between the portal and the WDA backend system (WebAs). The Object Based Navigation framework, among other things, is based on Java Script, hence it needs that the portal and backend will have the same protocol and the same domain. Please check note 945516 -  Web Dynpro ABA in a portal environment.

  • Performance Management (Appraisal Documents) ABAP webdynpro error on HTTPS

    Hello all,
                      Please help , in resolving the issue with Performance Management Application "Appraisal Documents" getting Blanks Screen on the routing back from "Appraisal Document" after user close the application. Issue is only applicable in 'HTTPs' and work fine in internal network.
    On HTTP Watch :  "ERROR_HTTP_INVALID_SERVER_RESPONSE"   in the trace.
    Steps to replicate :
    1. User click on the "Appraisal Documents" link on the Area page and open the application on the new window.
    2. User select one of the "Appraisal document" from the list available to work on it , which result in another window.
    3. User close the application after finishing the work on the "Appraisal Document" and return on the Parent window "Appraisal Documents".
    4. At this point "Appraisal Documents " window get refresh and every things looks great.
    5. Now if user want to select another appraisal document to work on it in "Appraisal documents" window, it freeze or give blank screen.
    Thanks in advance.

    Hello surya,
    is the problem solved?
    Best regards Oliver

  • Appraisal document header not showing up in the Portal

    when I look at the appraisal document in Portal ESS MSS (using WD4A application Appraisal Document) the header of the appraisal document does not show up (in PHAP_ADMIN it does).
    how can I show the appraisal document header in the Portal?
    regards,
    Tiberiu

    >
    Chris Thomas wrote:
    > Do you know how to set the template such that the Header is expanded (displayed) by default ?
    >
    > Chris
    hi chris, that would almost definitely only be available by doing a webdynpro enhancement to hap_main_document.

  • Appraisal Document Error "Document not found"

    Hi All,
    I have created iVIew MSS Appraisal Document with following details
    Technical Name of iView   :   com.sap.pct.erp.mss.hap_document
    Technical Name of Application :   HAP_MAIN_DOCUMENT with application parameter Mode=D
    Runtime Technology   :  ABAP/Web Dynpro
    Help URL :  [http://help.sap.com/erp2005_ehp_04/helpdata/en/6f/c2cfcd65164677ba4179718188f75e/frameset.htm]
    While accessing "Appraisal Doucment" from Portal getting "Docuemnt Not found" error.
    If I will click on Adapt Configuration button in the view getting  "Access via 'NULL' object reference not possible" error.
    Thanks in Advance,
    Risha

    Hello Risha,
    If you've applied the note 1416756 , you probably already have the ESS and MSS Business Package 1.41.
    First off, have you got the standard iViews to work from the standard ESS portal role before creating you own iViews?
    On your Portal Content Admin tab, navigate to Content Provided by SAP->End User Content->Employee Self-Service->ERP 6.0 EHP4->Pages->Career and Job
    You will see 2 pages called Appraisal Document and other two called Appraisal Documents (WD_UI) and Appraisal documents (Predefined Process). Since you are trying to use hap_main_document, I assume you are trying to get the Flexible Template iViews working.
    The Pages you will want to reuse/copy are Appraisal Documents (WD_UI) and Appraisal Document with the PCD ID ending with documents_ee.'Appraisal Documents (WD_UI)' is your starting point and 'Appraisal Document' is your target page on clicking on an individual document. If you check the properties of the iViews included in these pages, the ECC applications used will make more sense. (Notice the OBN within the WD_UI page under the page properties. The OBN operation used should show up here If you want to add your own, navigate to Portal Content-> Business Objects->ERP->HR . Locate the operation you want to use and add it to this perspective in your custom page) .
    So create some docs using 'phap_prepare' . Launch the Appraisal Documents (WD_UI) page and click on the doc you've created. The target Page will be launched . What you have been trying to do all along (I think) is launch the target page independently without any inputs.
    Good luck
    Pooja

  • BADI for changing Appraisal document application name for Web dynpro ABAP

    Hi,
    For Appraisal document customizing through PHAP_CATALOG_PA, We have BADI HRHAP00_BSP_TMPL  to change the BSP application name which can be used in Web layout for output display. Using this we can change application name from HAP_DOCUMENT to custom BSP application name
    Similarly, what is the BADI for changing Web dynpro ABAP applictaion name? Currently its triggering HAP_MAIN_DOCUMENT.
    how do we change application name to some custom web dynpro application name
    Regards,
    Kothand

    Hi Karim,
    I don't know, if there is any chance to get the Webdynpro application name. At least in the ABAP System fields is no information about the webdynpro application name.
    One remark: I have allways problems with BAPIS / BADIS that behave different depending on the caller. Could it be a good idea to pass some information through the interface / parameters?
    Best regards
    Renald

  • Appraisal Document Selection - HAP_MAIN_DOCUMENT / RABAX_STATE error

    When selecting the appraisal document within the MSS view or ESS view the following error message comes up. 
    Error when processing your request
    The URL http://saperpdev.sw.schwans.net:8080/sap/bc/webdynpro/sap/hap_main_document was not called due to an error.
    The following error text was processed in the system SC1 : Error in ABAP/4 statement when processing an internal table. table.
    The termination type was:  RABAX_STATE
    Thanks for your time.
    Edited by: Mary Jo Wartner on Mar 19, 2010 6:04 PM

    The config for the tab order was wiped out in the IMG.  Need the checkmarks replaced for what levels to display as tabs.

  • Appraisal documents with Webdynpro application

    Hi All,
    in my system i can see some of the webdynpro application for appraisals
    e.g.
    HAP_START_PAGE_UI  with application hap_a_ess_start_page
    HAP_DOCUMENT_LINK with application hap_document_link
    etc..
    but when i am trying to run the application i am getting the error message
    Error when inserting or changing in a sorted table
    I have already created the appraisal template and all and those are running with the hap_document_pa BSP application.
    I just have the requirement of look and feel changes so i want to check this out.
    Regards,
    Umesh Chaudhari.

    Hi,
    An objective setting cycle encompasses the following phases:
    Planning
    In a planning consultation, the necessary qualifications and competencies are first identified for an employee and then concrete objectives and required performance levels are agreed. For example, sales targets could be defined and the employee could agree to take on specific tasks in a project, and so on. These aspects can be defined by the manager, by the employee or both. The employeeu2019s personal training and development requirements are discussed and entered in the objective setting agreement.
    Review
    During the review, the objectives agreed with the employee during the planning phase are checked and adjusted to reflect the current situation. The manager and employee discuss the possible need for support, establish whether the objectives defined in the planning phase are still relevant, and add further objectives or decide to delete obsolete ones. Furthermore, the manager can make comparisons between the objectives set previously and the employeeu2019s current performance.
    Appraisal
    During the appraisal, the manager and employee discuss the extent to which the employee has fulfilled the set objectives. They check and assess the employeeu2019s overall performance and the implementation of concrete set objectives. Any further training requirements or an overfulfillment of the objectives are identified in the different areas. The appraisal document is completed when the manager and employee agree on an valuation. As soon as the appraisal document is saved in the system as Completed or Approved, the employeeu2019s compensation can be adjusted automatically and the employeeu2019s qualifications profile can be updated
    Get the proper information from following .
    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=53773.

  • IFrame fatal script error when calling application

    Dear All ,
    I'm facing a problem on a web dynpro abap on a PI 7.11 application server.
    I have a view wich contain a iFrame with the property field "source" binded with a context element that contain a url.
    In the url I'm trying to call an application that show the audit log (is the standard PI audit log).
    The aplication dump and give me this error:
    "The following error text was processed in system : WebDynpro Exception: URL may contain fatal script
    The error occurred on the application server and in the work process .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RAISE of program CX_WD_GENERAL=================CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C0STANDARD==============CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
    Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP"
    I know that the iFrame is deprecated, but I have another server with the PI 7.0 with the same web dynpro and it is working fine.
    Do you have any suggestion??
    Thanks in advance!
    Dario Fracassetti.

    I Have tried to debug into the method is_valid_url but it calls a System command:
    SYSTEM-CALL ict    "#EC CI_SYSTEMCALL
            did
              ihttp_scid_check_uri
            PARAMETERS
              url                                " >
              l_url                              " <
              c_last_error                       " < return code
              OPTIONS.                           " >
    I don't know if that call is debuggable. In version 7.00 the call was this:
        SYSTEM-CALL ICT
          DID
            ihttp_scid_check_uri
          PARAMETERS
            url                                " >
            l_url                              " <
            c_last_error.                      " < return code
    and was working fine.
    I tried to debug the method cl_http_utility->CHECK_HTTP_WHITELIST, but unfortunately in my case this method is not called.
    Regards,
    Dario

  • Error when calling a popup window in the initial screen of an application

    Hi,
        I am calling a popup window in the Initial screen to select the variant list.
    I am getting an error reference to Null Object reference.
    Here is the Error.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          15.06.2007 10:00:16
    Short text
    Access via 'NULL' object reference not possible.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
    "CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
    "SUPPLY_VIEW_DATA"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
    the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
    Looking for Ur valuable suggestions.
    Cheers,
    Sam

    Hi Sam,
    The correct code for creating a popup window will be:
      data lo_window_manager type ref to if_wd_window_manager.
      data lo_api_component  type ref to if_wd_component.
      data lo_window         type ref to if_wd_window.
      lo_api_component  = wd_comp_controller->wd_get_api( ).
      lo_window_manager = lo_api_component->get_window_manager( ).
      lo_window         = lo_window_manager->create_window(
                         window_name            = 'WINDOW_NAME'
    *                    title                  =
    *                    close_in_any_case      = abap_true
                         message_display_mode   = if_wd_window=>co_msg_display_mode_selected
    *                    close_button           = abap_true
                         button_kind            = if_wd_window=>co_buttons_okcancel
                         message_type           = if_wd_window=>co_msg_type_none
                         default_button         = if_wd_window=>co_button_ok
      lo_window->open( ).
    Hope this helps.
    Regards,
    Ram

  • Error while calling COM routines via application prog(return code 1028533-)

    Hello Expert,
    In Interactive Demand Planning ( /SAPAPO/SDP94 ), when I'm trying to load data in a planning book , error
    'Error while calling COM routines via application program (return code 1028533-)' is encountered.
    In my selection id, i have only two locations....there is no material selection. 
    When I select the 1st location and load the data its getting loaded properly.....but when i select the 2nd location and try loading data ...the above error is coming.
    I did run /SAPAPO/TS_LCM_CONS_CHECK but the problem persist.
    Any advise to fix this issue would be much appreciated.
    Thanks.
    Tom

    Hi Tom,
    Please see if below exiting threads help you.
    COM error 40134 in Interactive Planning on SCM 5.0 Support Pack SAPKY50011
    Error for COM Routine application program (return code 40028)
    Thukral

  • Error while calling application?

    Hi all,
    I m getting a error while i m testing my application...
    Error:WebDynpro Exception: ICF service node for application /sap/public/myssocntl does not exist
    Note
    The following error text was processed in the system CGQ : WebDynpro Exception: ICF service node for application /sap/public/myssocntl does not exist
    The error occurred on the application server cgslsvr1_CGQ_30 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RAISE of program CX_WD_GENERAL=================CP
    Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    Plz help to resolve,
    Thanks
    Ravi

    There are certain other services, beside just the ones for your application, that must be present and active. They are documented in this help link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
    Normally you get an error message if the standard nodes are not active. From this message, it would appear that one of the standard nodes is actually missing - not just deactivated. This is a serious problem and likely would only present if some intentionally deleted an SAP delivered Service Node.

  • ESS Appraisal Document Adobe Print Error

    Hi,
    we are in the midst of upgrading our system from 4.7 to ECC6. We have noticed that once upgraded, we are getting error when we try to print the performance management document. In Portal, once we clicked on the appraisal document, we click on the print function. Next, we click on 'open'. we get the following message:-
    "Adobe reader could not open webforms.pdf because it is either not a supported filetype or because the file has been damaged"
    Any idea why? Is it an Acrobat issue rather then a SAP issue? 
    Thanks

    Hi,
    Check the details .....
    Check the ADS connection "SM59".....with Basis People
    Also check the ADOBI Version that you have using ....
    The Acrobat version should be latest one.

Maybe you are looking for