Error in Canceling Excise Invoice
Hello All,
I am facing following error while canceling excise Invoice in ECC6.
"No item information transferred into Accounting".
However the same is working properly in 4.6.
Please guide.
Thanks & regards.
Hi,
Please go through the link given below.
Re: Error"No item information transferred into Accounting"in PRELIMINARY_POSTIN
Hope it helps,
Regards,
MT
Similar Messages
-
Assign CO object error while cancelling excise invoice
Dear Gurus,
I am getting following error, while cancelling excise invoice. I was able to post the excise documents without this error.
Account N870 requires an assignment to CO object. Message no.KI235
Kindly help me to resolve this issue.
Regards
RangaIf you click on the long text of your error message, you will see an explanation of how to fix the error there.
Or just put an entry into table OKB9 for the GL Account N870 -
Error in cancel excise invoice
Hi,
When i try to canccel the excise document in J1IH, i get the error as Message: 4F235,Reference of xxxxx/YYYY exists in open ARE document. but, no ARE exists for this document. Please let me know how to cancel this document.
Thanks & regards,
PrasadDear Charles,
Pls check below program in the include.and sugest accordingly.
Thanks & Regards,
PRASAD.
INCLUDE MJ1IHF01 *
All the forms which are used in this module pool
*& Form EXIT_TRANSACTION
Form to process the Exit transaction routine *
FORM exit_transaction.
PERFORM unlock_excise_invoice.
IF sy-dynnr EQ '0050'.
SET SCREEN 0.
LEAVE SCREEN.
ELSE.
SET SCREEN 50.
LEAVE SCREEN.
ENDIF.
ENDFORM. " EXIT_TRANSACTION
*& Form VALIDATE_MATL_DOC_NUMBER
To validate the Matl document number provided as reference *
FORM validate_matl_doc_number.
PERFORM clear_values.
to check if already used
PERFORM mat_doc_already_exists.
To display the line item data for valid material documents entered.
PERFORM retr_mat_doc_line_item_data.
Checking for Valid Material Document Number
IF sy-subrc NE 0.
MESSAGE e202.
ENDIF.
ENDFORM. " VALIDATE_MATL_DOC_NUMBER
*& Form DOC_YEAR_NOT_INITIAL
To ask for Document year if empty *
FORM doc_year_not_initial.
IF jv_document-year IS INITIAL.
MESSAGE e418.
ENDIF. -
Error message in Excise invoice cancellation J1IH or J1IIN
Dear Experts,
while i am cancelling Excise invoice through J1IH And J1IIN ,amd getting the below error, i searched a lot about this on forum,but there is no solution find please help me to overcome this error issue.
Invalid parameter value at <> SPACE. Only allowed
Message no. AM004
Thank and Regards,
madhuHi,
Refer to SNote Note 1382678 - Pop-up to select Excise Invoice in J1IH/J1IIN cancellation.
Symptom
While cancelling outbound Excise Invoice through the transaction J1IH or J1IIN, system always picks up the first excise invoice even when multiple excise invoices are present with same excise number and year.
Regards, -
Unable to cancel excise invoice.
Dear friends,
We use movement types 103 & 105 for GR.
At 105, we capture excise invoice.
Using J1IEX, we post the same.
Whenever, 105 GR is required to be cancelled, we used to "post" & "cancel" excise invoice (2 steps) and then create another 105 GR.
But, suddenly, for one invoice, system is not permitting to "post" the excise invoice after 105 GR cancellation. The error message is as below.
All Part I entries have been canceled for excise invoice 18 2009
Message no. 4F113
Hence, we have tried to cancel the GR without "post". For this, the error message is as below.
Reverse the availed CENVAT credit before cancelling excise invoice.
Message no. 4F148
Please guide me to post & cancel (or) cancel the excise invoice.
Thanks & regards,
SivaHi,
i am little bit confused.
Have u posted reversal of 105 ?
if yes then in J1IEX put the Material doc no and post the invoice.
or system not allowing u to cancel 105 also ?
if yes then check whether QM is active.
if QM is active then check rejection happened for material .
Please update ,
regards,
sujit -
Find Billing Document of Cancelled Excise Invoice
Dear All,
How we can find out billing document of cancelled excise invoice?
Please help.
Regards
H.P.For ex. I have an excise no 100 which is cancelled and its status is CEIV and I want to find out its billing document no. how can I find out.
Becase when excise invoice is cancelled then its referrence does not exist in the excise header table
I hope you understand my problem.
Regards
HP -
Error in allocating excise invoice
When i do the billing using vf01, the billing document is displayed. On saving the billing document, i get the message " Print excise invoice in series group S2 using j1-ip for billing document" and a message at the bottom of the screen comes "excise document created for billing document". However when i try to post it to accounting, I get a message "express document" update was terminated"". On clicking the error, it shows " error in allocating excise invoice" and the attribute defined for it is "Express copy printing not allowed . Forwarding not allowed". How to resolve this problem? Please help
Rohit UniyalHi Garima/Rohit,
Please check in Customizing, whether you have properly maintained the IMG activity Excise Group - Series Group Determination.
Further,
Check your Number Ranges for both
Billing type F2 as well as for Excise Invoice Number range for all relevan objects.
May be there is overlapping of Number Ranges Somewhere.
Plz Check these settings.
Reward if found useful.
Regards,
Gaurav Raghav. -
Hello SAP gurus,
We have developed a programme for creation of Excise Invoice, once the document created we post it manually through J1IS.
The problem once Excise document generated (Posting not done) and if i want to cancle the invoice through J1IS, it is showing message "Document XXXXXXXX not posted". so can any one give me solution how to cancel Excise Invoice which is not posted.
FYI: Our sales process is- Sales order,Delivery,PGI,Excise,Billing
Thnx in advance for the replies.
SrikkyFirst check in the following IMG path
LG --> Tax on Goods Movements --> India --> Account Determination --> Specify Excise Accounts per Excise Transaction. Here ensure that following are maintained
CEIV CR Credit MSUSP CENVAT suspense account
CEIV DR Debit PLAAED PLA AED account
CEIV DR Debit PLABED PLA BED account
CEIV DR Debit PLASED PLA SED account
CEIV DR Debit RG23AED RG 23 AED account
CEIV DR Debit RG23AT1 RG 23 AT1 Account
CEIV DR Debit RG23BED RG 23 BED account
CEIV DR Debit RG23ECS RG 23 ECS Account
CEIV DR Debit RG23SED RG 23 SED account
Next select the next tab Specify G/L Accounts per Excise Transaction
There ensure that for the combination of Excise Group, Excise Transaction Type CEIV, Company Code and Chart of Accounts, necessary G/L Accounts are assigned
thanks
G. Lakshmipathi -
Reversing PGI without cancelling Excise Invoice
Hi,
Is there any process where we can Reverse PGI without cancelling the Commercial Invoice & Excise Invoice and again connecting the same corrected delivery to the old invoice number.
To be more clear, in delivery if I have picked a wrong batch number (different from the physical dispatched batch) and generated the invoice. The mistake was identified at a later stage. So I can't cancell the invoice as it has already been sent to the customer. But in the system I have to correct the batch number to maintain the correct records.
Please suggest if any solution is thereHi,
Your excise invoice is created with reference to the billing document and billing document has been created from delivery since PGI has been done.
You will have to cancel excise invoice using J1IH and cancel your billing document using VF11.
Reverse PGI using VL09, change batch in the delivery and PGI it again.
However, you would have new commercial invoice and new excise invoice numbers for the same.
Nothing can be done to retain the same invoice number using std SAP.
Regards,
Amit -
How to cancel excise invoice when mov type is 122
Hello,
We are creating the PO for one material. and make the GR for that material (material is Quality inspection material)
so i,e the reason the material is goes to Quality inspection.
Till then we are Made the J1IEX create the Part1 and Part2 entry.
So in mean while in Quality all the material's are rejected so, now how to reverse the Part1 and Part2 entries.?
How to cancel excise invoice when material is qulaity inpspection.
What i made:
Made the Return delivery means 122 mov doc and Try to cancell the excise invoice......but no successful
Regards
sapman manHi
Cancelling of excise invoice will be done in the following ways depending on the situation.
Case 1:
Create PO
Do MIGO (create and post excise invoice)
Create return delivery in quality inspection.
Now we have to create a rejection inmvoice in J1IS with reference to the return delivery wherein the excise values gets reversed.
If u try to reverse part 2 entries in J1IEX it will not come.
Case2:
Create PO
Do MIGO (create and post excise invoice)
Do cancellation of MIGO (102 mvt)
With ref to vendor or internal excise invoice number just post the transaction. excise part 2 entries will get reversed. This will happen only if 102 entry exist for the PO line item.
In a nutshell excise entries cancellation comes only if we cancel the material document. If we do return delivery then we have to create rejection excise invoice.
Hope u get cleared in this regards
Reg
Raja -
Number range in cancelling excise invoice
Hai Gurus
wats the number range object for cancelling excise invoice???
regrds
VibhuDear Vibhu,
There is no number range object for cancellation of excise invoice.
for excise invoice number range object is for local:J_1IEXCLOC
when cancelllation for excise invoice system geneate internal number range number.
for internal number range object is :J_1IINTNUM
for your better understanding find the folloing number range objects
J1I9 Maintenance for Number Range Object
J_1A_AAWBL Internal Way Bill Number for Asset Movements
J_1ANUMBER Number range for additional Argentine document number
J_1AOFFDOC Numbering Object for Official Documents
J_1APRNTCH Number ranges for printing characters
J_1BNFDOCN Nota Fiscal document number
J_1BNFNUMB Nota fiscal number
J_1I57FC 57FC Number Range Object
J_1IARE1 ARE1 Doc No object based on Series Group
J_1IARE3 ARE3 Doc No object based on Series Group
J_1IBOND Excise Bonding: Bond number object
J_1ICERT Withholding Tax Certificates (India)
J_1ICHLNNO Internal number range for challans
J_1ICONPLA Consolidated PLA serial no. generation
J_1IDEPINV Excise Invoice Number for Depot Invoices
J_1IEXCEXP Export excise invoice number range
J_1IEXCINV Excise invoice number **
J_1IEXCLOC Local excise invoice number range *******
J_1IEXCTST Excise invoice with intervals
J_1IEXINEX Excise invoice number for export
J_1IINTNUM Internally document number to be generated
J_1IINTPR2 Dispatch serial number
J_1ILIC Excise Bonding: License number object
J_1IPLA2 PLA part II number range object
J_1IRG1 RG1 Number range object
J_1IRG1_T No. Range for RG1 - Excise group / Material
J_1IRG23A1 RG23A part 1 no. range object
J_1IRG23A2 RG23A part II number range object
J_1IRG23C1 RG23C part I number range object
J_1IRG23C2 RG23C part II number range object
Regards,
NAr -
T-code for cancelled Invoice and cancelled Excise Invoice
Dear Guru,
kindly let me know the T-code for cancelled Invoice and cancelled Excise Invoice.
Wishes,
AbhishekHi Abhishek,
I am not aware of any T-code through which you can see the cancelled invoice. I think either you have to go for development (SQVI)
or
Extract the list of your all billing document like billing document created from 01.01.2010 to 22.04.2010
Now go to SE16 --> Table VBFA --> Give your billing document number in field "Preceding Doc." --> and in the field "Subs.doc.categ." --> choose entry "N Invoice cancellation" --> system will show you all the entries for which cancellation billing document has been created.
or
Go to SE16 --> Table VBRK --> enter your billing document list --> In the field "Posting status" --> Choose option "E Billing Document Canceled"
Hope it helps,
Regards,
MT -
Error while creating Excise Invoice
Hi All,
Can any one help me on CIN?
I am getting one error while creating "Excise Invoice [T.code J1ILN]" i.e. "System failure during locking GL account Cocode by 13113910"
Regards
ChowdaryDear Raghavendra
Please make a try with the following but I am not sure whether it will solve your problem.
Go to FS00, give the G/L account which has the problem and select "Control Data" tab. Here punch as asterisk in the field "Tax category" and save.
Now try to create the excise invoice.
Thanks
G. Lakshmipathi -
Hi,
Where can we see that whether a particular Excise Invoice is cancelled?
Thanks in advance
GirishDear Girish
Go to J1I7, input the following
- Excise Group
- Excise Transaction Type (should be CEIV)
- Excise Invoice Date
and execute.
The list whatever you see are cancelled excise invoices.
thanks
G. Lakshmipathi -
Cancel excise invoices created for a Depot
Hi
How to cancel excise invoices created for a Depot ?
regards
N Banuyes, that is the reason SAP has provided only one option to enter only one billing document no when creating excise invoice through J1iin.
Regards,
Sudhir
Maybe you are looking for
-
Using RealPlayer (dialup) - How can I give N/W preference to it's buffer?
4-25-06 Is there a "safe" way to configure the machine so that "1st preference" is given to keeping the RealPlayer buffer full (listening to radio stream)? I use 56Kb dialup and don't mind slowing down e.g. Safari etc but don't want the radio stream
-
How many of these objects should I be able to insert per second?
I'm inserting these objects using default (not POF) serialization with putAll(myMap). I receive about 4000 new quotes per second to put in the cache. I try coalescing them to various degrees but my other apps are still slowing down when these inserts
-
Select flat file name using routine
Hi experts! I am trying to write a routine in the infopackage for flat file extraction, which will select the flat file automatically according to the date. I need to load always the file of the previous week. Please help me correcting the code. The
-
I created a DVD and added images to the Drop Zones. When completed I burned the DVD. The images in the Drop Zones are grainy with horizontal lines. The preview before the burn looked fine, really crisp and clear. Note: I did use the computer for othe
-
I get the following error in Disk Utility while trying to repair permiss...
http://img80.imageshack.us/img80/9639/picture1xp1.png Here's the error.