Error in CC monitoring.

HI,
I am getting this error in RWB--> CC Monitoring.
Unable to execute statement for table or stored procedure. 'null' (Structure 'ELIEF') due to java.lang.IndexOutOfBoundsException: Index: 1, Size: 1
Please guide me, what can be the cause and the solution.
Thanks

Hi Puneet,
I also faced the same problem earlier.
If i remember correctly it was because of CAPS problem.
I would suggest you enable logging in your JDBC adapter and see if the query which is created by the file adapter is right.
In Advanced Properties enter the following..
logSQLSatement true
Save & Activate.
Next time when you run the interface you can see the sql stamenents generated in CC Monitoring<i> Audit Log</i>
for additional help in logging check out my reply in the following thread..
Inserting Multiple Rows into Database Table using JDBC Adapter - Efficiency
Regards,
Sumit
Message was edited by:
Sumit Khetawat

Similar Messages

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

Error in message monitoring while creating new record in R/3

Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
Devendra

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

"Error in message monitoring in runtime workbench"

Hello All,
I have an error in message monitoring in runtime workbench.
We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
Please suggest what are the steps involved to resolve this problem.
Thanks and Regards
SAN
null
k san

San,
Can you please copy / paste error message.
Also check if you have set correct port in Exchange profile under Runtimeworkbench.
Nilesh

Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?

Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?

Your factory-supplied monitor profile, associated with your monitor by the operating system, is bad. It's more common than you'd think.
To avert the error:
Open the Color Management panel of your Windows operating system. In the Devices tab, if it is not already listed [ Add... ] the sRGB IEC61966-2.1 profile and [ Set as default Profile ].
After doing the above, log out of Windows and back in again, just to ensure everything's updated.
Note that the above assumes your monitor is more or less displaying color in the sRGB color space (sRGB is short for sRGB IEC61966-2.1). For many monitors this isn't a terribly wrong assumption.
If you want to ensure you have the most accurate color, consider buying a calibration and profiling device, which (with its associated software) can set your calibration and generate custom color profiles by doing actual measurements from your monitor. You'll want to take some time to get your mind around how color-management works, and that is not a trivial task. It's certainly well beyond what can be taught in a forum post by post.
Good luck.
-Noel

OS 10.6.8, Macbook Pro 3.1 error when saving monitor calibration, cannot save.

Macbook pro 3.1 OS 10.6.8, error when saving monitor calibration profile. Tried to name new profile, or save as an older profile, still got error when attempting to save.

Try a NVRAM reset, and then go through the monitor calibration again.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

SWL order Error message on monitor 'Sum of % 200.0 exceeds 100%'

Dear all,
i am getting the following error for shop with limit order.
User has created A SWL PO with all identical data like vendor, Pur org, product category and only description change for 2 lines. Its showing only one PO which is in 'Error in Process' .
How can a cart with two lines convert into a 2 line PO ?? as per standard SRM it should create 2 different PO.
Noted that Error message in monitors reads 'Sum of %>200.0<exceeds 100%' in RZ20.
Line 1 reset. Sent to for approval. Ran resubmission process - did not work
Error in process. Error message in monitors 'Sum of %>200.0<exceeds 100%'>

Hi,
I think that the error is with the backend system which cannot handle 2 limits for one PO...
There is an OSS note...
Kind regards,
Yann

Trex Index error in Component Monitor

Hi Experts,
I have created an index for indexing one of the KM folder . When I check the queue status from TREX monitor screen, it shows Document Status as "Preparation
Failed"
Return Message : 8005
Return Message : Timeout reached
Return Message : 8006
Return Message : Lost Connection to peer
I have also checked Component Monitor in that Repository Managers and Services shows runing status but there is errror symbol with yellow trangle.
Can someone please help me out

Yes Sir,
There are errors in component monitor and i have expanaded the node ands checked the errors that are as follows,
Component Monitor --> Services --> scheduler --> attachmentscheduler startup failed :
Configuration Error: No CM system assigned to this task
Component Monitor --> Services > reporting> Startup Error: exception in startup: Invalid RID: No repository manager found for prefix: /reporting
Component Monitor --> Repository Managers > reporting> startup failed
Component Monitor --> Repository Managers >taxonomy> Startup Error: taxonomy manager: start failed
We had assigned one server node to Scheduler Tasks.
Still there is same error.

Error in Application Monitor

Hello,
I am facing a weird problem.
I see an error in application monitor with no description. It only has the date and time.
When I try deleting this error, I get a message "Error deleting alert"
Now in RZ20, I see that there is an error under Purchase Order.
"Backend application errors PurchOrder 4100001842: Transfer failed"
When I try to open this and try to complete it, I do not see any item under the screen "Alert Display". So I am unable to complete this from RZ20.
We are aware of the fact that we did have an error witht his PO. There was some config error which was rectified and moved to production after which the PO made it successfully to ECC.
But the error remained in the application monitor and is now haunting the monitoring team who are forced to check every time to see if this is the old or a new one.
Any idea on how I can get this off the app monitor?
Thank you.
Manish

Hello Muthu,
I have checked this already. We do not have any error in BBP_PD for this PO. This has got replicated to ECC with no errors.
Not sure why this is still seen in app monitor.
Any FM/Table from where I could delete this log entry. Just kidding..
Pls advise.
Thank you.
Manish

Re: Error in mesage monitoring

Iam getting this error in message monitoring
my sender is idoc and receiver is jdbc.
Unable to execute statement for table or stored procedure. 'EPMFA_ORD_HST' (Structure 'EPMFA_ORD_HST_Insert') due to java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]String or binary data would be truncated.
JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'EPMFA_ORD_HST' (structure 'EPMFA_ORD_HST_Insert'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]String or binary data would be truncated....

Hi ,
Check your test data,the problem with data,the error could be because of the length of filed defined in data base is less than your test data filed length.
your database table has a colum named 'EPMFA_ORD_HST' of type VARCHAR(30),Now if you will try to insert a string of length greater than 30, the program will throw this type of exception.
Regards,
Raj

Display Additional errors in Participation Monitor (HRBEN0003)

Hi,
How can i display additional error in Participation monitor.
I want to display error when there is a child who is a student exists and if the age of the child exceeds 18, he can no longer exist as a student.
So if the age exceeds that limit i want to display error in Participation Monitor.
let me know if there is any BADI or User Exit available?

solved on my own

Error while Deploying Monitoring Server Reports!

Hi,
Trying to install the monitoring role with reporting services but must have missed one or several steps! :)
Have 1 standard edition server and 1 server running Lync monitoring and SQL (that I installed myself, hopefully correct)
Have installed SQL with instance LYNCSQL\LYNSQL (also checked the reporting services feature)
Have intalled the Standard Edition server
Have installed the Monitoring role
Now I want to "Deploy Monitoring Server Reports" from the Lync Server Deployment Wizard.
Specifying Monitoringserver with FQDN (the same server as the acctual SQL server)
Specifying LYNCSQL\LYNCSQL as the Instance\InstanceID
Specifying the systemaccount that I added during the SQL server installation
Don't specifying any usergroup
Receiving the following error:
Could not get objects from namespace root\Microsoft\SqlServer\ReportServer. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)Cannot get the ReportServerWebService
URL. Verify that Reporting Services is deployed and configured properly on the target SQL instance:"LYNCSQL\LYNCSQL", and that WMI is included on the exception list of firewall setting on the server that is running Reporting Services.Invalid parameter
Windows Firewall is Off!
SQL Server 2008 x64 SP2
When looking in the Lync Server Console I see green status of Standard Edition and the Monitoring Server, but from my LYNCSQL\LYNCSQL i have status of N/A.
Where to start? :)
Update:
Logged on to the Reporting services configuration manager and here are the settings:
Use Built in Account: Local System -> correct or should it be sys.lyncsql as I mentioned before?
Virtual Directory: ReportServer_LYNCSQL
URL: http://servername:80/ReportServer_LYNCSQL
SSL: Not Selected

Hi,
Firstly, you need make sure Web Service URL and Report Manager URL could be opened in both Lync FE and SQL server.
If prompt authentication chanllenges you have to change the built in account with "Network Service".
Furthermore, make sure firewall is turned off when troubleshooting to rule out ports and connection issue.
Update let us know.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Hi Ben,
I have a similar problem where I cant deploy reports. Also, I´m prompted when trying to access /Reports and /ReportsServer using IE on reporting services server.
What do you mean with change the built in account with "Network Service ?
Chech my thread:
http://social.technet.microsoft.com/Forums/en-US/ocsmonitoring/thread/7e213177-9e61-4859-b2a8-301813c4298d
Best regards, Daniel
www.twitter.com/danielullmark

Error in CC monitoring.

Similar Messages

Maybe you are looking for