Error in cdr file

hi,
Today, when I was working with a file in Corel and wanted him to withdraw, I got the error "
Out of memory"
Then I tried to do the same with other Corel files and got the same error.
I think that the problem is not in memory, because it also happens with other smaller files, and my computer has a memory of 8GB.
I tried to work with this file on another computer and there are the same problems too.
I also repair Corel with installation tool, but no luck.
Can you help me?
Thank you very much.

I also suggest emptying the windows %temp% folder, and check that you have plenty of free space on the drive that provides virtual memory.
Also you have either used a corrupted font in your job or have it installed on your system. You can confirm by converting entire text in the file to curves and then try collecting for output.
You can go to this forum here to discuss the problem with
Corel Drow http://www.filerepairforum.com/forum/cad-tools/cad-tools-aa/coreldraw/479-problems-with-cdr-files
Also, there is still a good option to take advantage of any recovery program. I can advise
CDR Open File Tool http://www.cdr.openfiletool.com/

Similar Messages

Opening CDR file - Extremely Fatal to CS6 64-bit apps

I'm trying to get down the bottom of what's causing an extremely serious error in the 64-bit version of Adobe Illustrator CS6.
Adobe Illustrator can open CorelDRAW .CDR files, to a certain extent. The .CDR files need to be saved down to version 9 or 10 compatibility. One of my coworkers just ran into a really bad Illustrator CS6 crash caused when opening a .CDR file. This is a crash I had to endure on my own new system a couple months ago.
After Illustrator CS6 64-bit crashes it simply refuses to launch again. It crashes and closes. Rebooting doesn't help. Deleting the AI prefs file doesn't help. Worse yet, the crash basically hoses all of the CS6 64-bit apps that are installed. The 64-bit version of Photoshop CS6 crashes when opening a file.
The last time this happened my only recourse was to do a "factory reset" on my computer, basically wiping the hard drive and reinstalling Windows 8 Professional in a clean state and then going through the very long, slow process of downloading and installing the CS6 apps from the Creative Cloud.
Does anyone in this forum have any experience with this particular kind of crash? Are there any possible alternatives that might fix this error besides wiping the hard drive and starting over? This bug is pretty badly timed. Gonna have to go through all the download/install process stuff again when the new CC apps are released.

The bug is unpredictable. Once the bug has occurred Adobe Illustrator CS6 64-bit will no longer launch. Rebooting and deleting the aiprefs file doesn't work. Additionally the bug also permanently affects other CS6 64-bit applications. Photoshop CS6 64-bit will launch, but it crashes when opening any file. After Effects and Premiere Pro crash at launch. No third party plug-ins were installed on this computer.
Affected computer's hardware:
Dell XPS 8500 Desktop
• Core i7 3770 Quad Core 3.4GHz
• 16GB RAM - Dual Channel DDR3 1600MHz - 4 DIMMs
• nVidia GeForce GT640 1GB GDDR5 SDRAM
• 2TB 7200rpm SATA 6 Gb/s Hard Disc
• DVD-R/W Drive
• 19 in 1 media card reader
• Windows 8 Professional 64-bit
When this bug affected my own workstation a couple months ago, I tried to uninstall Adobe Illustrator CS6, download it again and then reinstall. Illustrator CS6 64-bit still refused to launch. The other 64-bit apps wouldn't launch either. So I ended up wiping the hard disc, reinstalling Win 8 Pro clean and downloading/reinstalling everything and just being careful to not open any .CDR files after that. My workstation is a little better equipped (Core i7 3770, 24GB of RAM, BD-RW drive, nVidia GeForce 660GTX, Intel SRT solid state drive with SATA 6gb/s 2TB HDD).
Previously I did run into problems when opening CorelDRAW .CDR artwork that was larger than a standard letter sized page. I would get hit with a dialog box saying "the file appears to be corrupt." I'd end up making CorelDRAW save the artwork into Adobe Illustrator CS5 format and then opening it Illustrator. Once my Adobe apps got hosed by a certain .CDR file I simply stopped trying to open any CorelDRAW files directly in Illustrator at all. Didn't want to go through the long process of reinstalling everything from scratch again. Unfortunately my coworker didn't remember the details of my experience. So now we're dealing with it on her new machine.
My coworker said she thinks she remembers which .CDR file caused Illustrator CS6 64-bit to crash. Here's a Dropbox link to it:
https://dl.dropboxusercontent.com/u/86940762/V130520-1%20CC%20expo%20center%20billingsley% 20ford%20FS.cdr
Warning: I do not recommend other users to try opening this CorelDRAW file within Adobe Illustrator CS6. I'm sure not trying it on my installation!
This particular .CDR file doesn't have any active type in it. But it does feature some strange clipped gradient effects. I think some of this artwork was originally created in Illustrator and then saved in CorelDRAW. I'm wondering if there is some sort of way Corel tried to reinterpret the artwork that caused Illustrator to lose its mind when reopening it. If memory serves correctly I was opening some similar Illustrator-generated and then Corel-saved art in my own copy of AI CS6 64-bit when it crashed.

Subcribers not sending CDR files to Publisher in the cluster.

HI,
We have call manager cluster 8.6 version and there are 5 nodes in the cluster.
I could see CDR files generated in the subscriber nodes but it is not uploaded publisher node CDR repository .
I am not seeing any CDR files in Publisher preserve folder.
2014-05-06 19:43:41,517 DEBUG [main] cdragent.cdrAgent (cdrAgent.java:213) - After failure to send files in the previous attempt. Creating new ftpClient object
2014-05-06 19:43:41,517 DEBUG [main] sftpapi.ftpClient (ftpClient.java:148) - ftpClient constructor
2014-05-06 19:43:41,517 DEBUG [main] sftpapi.ftpClient (ftpClient.java:150) - host = 166.98.48.155
2014-05-06 19:43:41,517 DEBUG [main] sftpapi.ftpClient (ftpClient.java:151) - user = ccmservice
2014-05-06 19:43:41,517 DEBUG [main] sftpapi.ftpClient (ftpClient.java:153) - localDir = null
2014-05-06 19:43:41,518 DEBUG [main] sftpapi.ftpClient (ftpClient.java:154) - remoteDir = null
2014-05-06 19:43:41,518 DEBUG [main] sftpapi.ftpClient (ftpClient.java:155) - secureFTP = true
2014-05-06 19:43:41,518 DEBUG [main] sftpapi.ftpClient (ftpClient.java:156) - permKey = true
2014-05-06 19:43:41,518 DEBUG [main] sftpapi.ftpClient (ftpClient.java:157) - Component Name : cdragent
2014-05-06 19:43:41,518 DEBUG [main] cdragent.cdrAgent (cdrAgent.java:216) - After creating the ftpClient object
2014-05-06 19:43:41,518 DEBUG [main] sftpapi.ftpClient (ftpClient.java:179) - connect()-->
2014-05-06 19:43:41,518 DEBUG [main] sftpapi.ftpClient (ftpClient.java:182) - connect(): connect for SFTP
2014-05-06 19:43:41,518 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:94) - Inside the SFTPConnection Constructor
2014-05-06 19:43:41,518 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:364) - checkConnection for Publisher using Key Authentication-->
2014-05-06 19:43:41,519 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:365) - checkConnection: UserName : ccmservice
2014-05-06 19:43:41,519 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:366) - checkConnection: hostname : 166.98.48.155
2014-05-06 19:43:41,519 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:215) - getSshClient-->
2014-05-06 19:43:41,519 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:272) - getSshConnector-->
2014-05-06 19:43:41,520 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:227) - SSH Connection object obtained
2014-05-06 19:43:41,566 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:405) - Trying to authenticate using Private Key File : /home/ccmservice/.ssh/id_dsa
2014-05-06 19:43:41,576 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:428) - The User is Authenticated. Need to get the SftpClient
2014-05-06 19:43:41,616 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:432) - SftpClient is obtained Successfully
2014-05-06 19:43:41,617 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:453) - <--checkConnection for Publisher using Key Authentication
2014-05-06 19:43:41,617 DEBUG [main] sftpapi.ftpClient (ftpClient.java:194) - The status of checkConnection : true
2014-05-06 19:43:41,617 DEBUG [main] sftpapi.ftpClient (ftpClient.java:217) - connect():Successfully connect to 166.98.48.155
2014-05-06 19:43:41,617 DEBUG [main] cdragent.cdrAgent (cdrAgent.java:224) - After attempt to get ftpClient connection
2014-05-06 19:43:41,617 DEBUG [main] cdragent.cdrAgent (cdrAgent.java:237) - Sleeping for 60 seconds
2014-05-06 19:44:41,628 INFO [main] cdragent.cdrAgent (cdrAgent.java:199) - waking up
2014-05-06 19:44:41,628 INFO [main] cdragent.cdrAgent (cdrAgent.java:384) - handleCDRFiles -->
2014-05-06 19:44:41,663 INFO [main] cdragent.cdrAgent (cdrAgent.java:285) - At the moment, # of files ready to be transfered to Publisher is 14011
2014-05-06 19:44:41,763 DEBUG [main] cdragent.cdrAgent (cdrAgent.java:426) - sendFile(): Try bldSendFileCmds
2014-05-06 19:44:41,763 DEBUG [main] cdragent.cdrAgent (cdrAgent.java:430) - FtpManager - sendFile() : The Parent directory of the remote directory send the files : /var/log/active/cm/cdr_repository/
2014-05-06 19:44:41,764 DEBUG [main] sftpapi.ftpClient (ftpClient.java:849) - bldSendFileCmds(): -->
2014-05-06 19:44:41,764 DEBUG [main] sftpapi.ftpClient (ftpClient.java:862) - bldSendFileCmds(): - no need to build command file
2014-05-06 19:44:41,764 DEBUG [main] sftpapi.ftpClient (ftpClient.java:863) - local directory: /var/log/active/cm/cdr/
2014-05-06 19:44:41,764 DEBUG [main] sftpapi.ftpClient (ftpClient.java:864) - remote directory: /var/log/active/cm/cdr_repository/trans/
2014-05-06 19:44:41,764 DEBUG [main] sftpapi.ftpClient (ftpClient.java:865) - final remote directory: /var/log/active/cm/cdr_repository/tmp/
2014-05-06 19:44:41,764 DEBUG [main] sftpapi.ftpClient (ftpClient.java:867) - file: cdr_Dublin_03_201404250000_140996
2014-05-06 19:44:41,764 DEBUG [main] sftpapi.ftpClient (ftpClient.java:869) - bldSendFileCmds(): return <--
2014-05-06 19:44:41,764 DEBUG [main] cdrrep.Util (Util.java:102) - checkJVMFreeMemory(): -->
2014-05-06 19:44:41,764 DEBUG [main] cdrrep.Util (Util.java:158) - checkJVMFreeMemory(): <--
2014-05-06 19:44:41,764 INFO [main] cdragent.cdrAgent (cdrAgent.java:433) - CDRAgent before sending the file: JVM status: [Max = 227.56MB, Total = 58.44MB, Free = 48.29MB (82.64%), Used = 10.15MB (17.36%)]
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.ftpClient (ftpClient.java:499) - sendFiles(): -->
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.ftpClient (ftpClient.java:510) - sendFiles(): file to send = /var/log/active/cm/cdr/cdr_Dublin_03_201404250000_140996
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.ftpClient (ftpClient.java:511) - sendFiles(): remoteDirectory = /var/log/active/cm/cdr_repository/trans/
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.ftpClient (ftpClient.java:518) - sendFiles():remoteDirectoryFinal(NOT NULL)=/var/log/active/cm/cdr_repository/tmp/
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.ftpClient (ftpClient.java:519) - sendFiles():remoteFilePathFinal=/var/log/active/cm/cdr_repository/tmp/cdr_Dublin_03_201404250000_140996
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.ftpClient (ftpClient.java:521) - sendFiles(): localFilePath = /var/log/active/cm/cdr/cdr_Dublin_03_201404250000_140996
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.ftpClient (ftpClient.java:522) - sendFiles(): remoteFilePath = /var/log/active/cm/cdr_repository/trans/cdr_Dublin_03_201404250000_140996
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.ftpClient (ftpClient.java:526) - sendFiles(): uploadFile
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:163) - sendFileThroughSFTP -->
2014-05-06 19:44:41,765 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:174) - Running put command to copy the file
2014-05-06 19:44:41,767 ERROR [main] sftpapi.SFTPConnection (SFTPConnection.java:194) - Sftp Status Exception : com.maverick.sftp.SftpStatusException: Permission denied.: Permission denied
2014-05-06 19:44:41,768 DEBUG [main] sftpapi.ftpClient (ftpClient.java:538) - Sftp Status Exception
2014-05-06 19:44:41,768 ERROR [main] sftpapi.ftpClient (ftpClient.java:539) - SFTP error in transferring file to another machine.
2014-05-06 19:44:41,768 ERROR [main] sftpapi.ftpClient (ftpClient.java:540) - com.maverick.sftp.SftpStatusException: Permission denied.: Permission denied
2014-05-06 19:44:41,768 ERROR [main] sftpapi.ftpClient (ftpClient.java:559) - Exception while sending files: com.maverick.sftp.SftpStatusException: Permission denied.: Permission denied
2014-05-06 19:44:41,768 DEBUG [main] cdrrep.Util (Util.java:102) - checkJVMFreeMemory(): -->
2014-05-06 19:44:41,768 DEBUG [main] cdrrep.Util (Util.java:158) - checkJVMFreeMemory(): <--
2014-05-06 19:44:41,768 INFO [main] cdragent.cdrAgent (cdrAgent.java:443) - CDRAgent after sending the file: JVM status: [Max = 227.56MB, Total = 58.44MB, Free = 47.77MB (81.74%), Used = 10.67MB (18.26%)]
2014-05-06 19:44:41,768 ERROR [main] cdragent.cdrAgent (cdrAgent.java:509) - sftp failed for file cdr_Dublin_03_201404250000_140996
2014-05-06 19:44:41,768 ERROR [main] cdragent.cdrAgent (cdrAgent.java:519) - Alarm: Unable to successfully send file to repository node.
2014-05-06 19:44:41,768 INFO [main] cdragent.cdrAgent (cdrAgent.java:548) - raising alarm CDRAgentSendFileFailureContinues
2014-05-06 19:44:41,769 INFO [main] alarmInf.AlarmSender (AlarmSender.java:107) - alarmName: CDRAgentSendFileFailureContinues
2014-05-06 19:44:41,769 DEBUG [main] alarmInf.AlarmSender (AlarmSender.java:113) - paramName[0] = CDRRepositoryNodeAddress -> paramValue[0] = 166.98.48.155
2014-05-06 19:44:41,769 DEBUG [main] alarmInf.AlarmSender (AlarmSender.java:113) - paramName[1] = CDRAgentNodeAddress -> paramValue[1] = DUB2IPTCCMPIN22/166.98.48.157
2014-05-06 19:44:41,769 DEBUG [main] alarmInf.AlarmSender (AlarmSender.java:119) - sendAlarm ...
2014-05-06 19:44:41,769 INFO [main] cdragent.cdrAgent (cdrAgent.java:575) - <-- handleCDRFiles
2014-05-06 19:44:41,769 DEBUG [main] sftpapi.ftpClient (ftpClient.java:283) - disconnect(): <-ftpClient->
2014-05-06 19:44:41,769 DEBUG [main] sftpapi.ftpClient (ftpClient.java:287) - disconnect(): SFTP Connection -->
2014-05-06 19:44:41,769 DEBUG [main] sftpapi.SFTPConnection (SFTPConnection.java:492) - disconnect(): SFTP Connection -->

Could you please check with TAC whether your CUCM version is also affected by the bug CSCsz99841 as I see "ccmservice" user in your logs too?
Description
Symptom:
Cluster Manager will update ccmservice user SSH security keys whenever a new node is added or removed from the cluster
Conditions:
CDR Agent cannot send CDR files from sub to pub using sftp.
This is because SFTP is initiating a connection using the user 'ccmservice'
Workaround:
i) Stop CDR Agent service on Call Processing Node
ii) Gain root access via remote access support account. And then
Copy over the authorized keys in the specific user's SSH directory:
/home/sftpuser/.ssh/authorized_keys file to
/home/ccmservice/.ssh/authorized_keys
Root CLI command:
cp /home/sftpuser/.ssh/authorized_keys /home/ccmservice/.ssh/authorized_keys
iii) Start CDR Agent service on Call Processing Node.
Further Problem Description:
This was caused by changes that were made to tighten up file permissions around the CUCM file structure

Open .CDR files on Illustrator?

Hi there,
One of my assignments is to create something on Adobe Illustrator, but since I have CorelDRAW, I just used it instead.
Is it possible to open a .CDR file on Adobe Illustrator (CS5+)?
Thanks for your help!

It depends on what version of coreldraw you have. Pdf may work as well, but you will need to test them formats and see which works the best. Also be prepared for errors and needing to change settings for the format to work, assuming it can.
That all the information I can give for now but if you goto the illustrator web page and coreldraws web page, they should provide what versions of the opposite it can open.
For example if coreldraw is older then illustrator should open the coreldraw format, if illustrator is older then coreldraw should be able to open the illustrator format. It is very rare to see a version come out in the same year that both would match, usually one needs to come out so the other can write the code needed for the others format.

Error While Adding File in Mimes

Hello Experts,
I am new to WDA, and am trying to add a image as a mime object in the WD component.
But its giving an error "Error when Loading File"
I tried putting the image in the Mimes repository but still the same error.
Any clue what can be the problem,?
Is any authorization requered?
The image is of type jpg
Thanks in advance
Jeet

hi ,
u proceed as follows , thn u wud be able to import the mime object
1 go to Object Name -> create->mime object ->import
2 insert a UI elemnt of type image
3 bind it source property with the mime . u wud find mime here
COMPONENT IMAGES tab , when u click on the source property of image

While importing a request error message' Check-sum error in data file'

Hi Friends
I have a problem.
We are trying to inport a request after putting the files in cofile and data file folders( 4.6C System).While doing so an error message is seen in the log " Check-sum error in data file after XXXX bytes".
Can some one help me with this?
Thanks
Regards
Ankur

Hi Ankur,
It is sure your file is corrupted or not present.
Check in cofiles and data directory under /usr/sap/trans your transport request number.
Best Wishes.
Kumar

Error in IDOC - File scenario

Hi Experts,
This is my error :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>INTEGRATION_SERVER_XID</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service INTEGRATION_SERVER_XID to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
OTHER ERROR FOR PAYLOAD OF SENDER PART IS AS BELOW :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The character '>' was expected. Error processing resource 'file:///C:/Documents and Settings/ABC/Local Settings/Tempor...
<?xml version="1.0" encoding="UTF-8" ?><ZZ/AFS/FUNACK><IDOC BEGIN="1"><EDI_DC40 SEGMENT="1"><TABN...
Please Help,
Regards,
Study SAP

Hi,
The problem occurs when sender and receiver business system or business service does not have a logical system name.
ID - Integration Directory
Posting the IDOC'S into SAP R/3 System, sender and receiver business system or business service requires the logical system name. If the business system (Web As ABAP) does not have the logical system name, then add the logical system for business system.
In technical system browser
If business system type = Web AS ABAP, then add the Logical system in Technical System level and Save.
If business system type = Third-Party, then add the logical system in business system level and Save.
If the business service does not have the logical system name in ID, it needs to be configured as follows.
Check the below screen shot which shows how to add the logical system for business service.
Go to ID and click the Business service -> Services -> Adapter Specific Identifiers. Enter the logical system name and Save.
Apply and activate.
Hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

Program Error- cannot open file? Please help! I lost my whole project!

When I try to open an animation psd file, I keep getting a box that says my request could not be completed due to a program error. The file is 23.7 MB and I am using a PC.... I at least need to get the file open so i can export the animation.

I don't personally know how to repair such a file, but I can suggest a utility that will be able to fetch an uncorrupted backup copy if it is in Window's Shadow copy.
http://shadowexplorer.com/ It's a free and easy to use utility. I personally have it.
Gene

Error message "Live file system repair is not supported."

System won't boot. Directed to Disk Utility to repair but get error message "Live file system repair is not supported." Appreciate all help.
Thanks.
John

I recently ran into a similar issue with my Time Machine backup disk. After about 6 days of no backups - I had swapped the disk for my photo library for a media project; I reattached the Time Machine disk and attempted a backup.
Time Machine could not backup to the disk. Running Disk Utility and attempting to Repair the disk ended up returning the "Live file system repair is not supported" message.
After much experimentaion with disk analysis softwares, I came to the realization that the issue might be that the USB disk dock wasn't connected directly to the MacBook Pro - it was daisy-chained through a USB Hub.
Connecting the USB disk dock directly to the MBP and running Disk Utility appears to have resolved the issue. DU ran for about 6 hours and succesfully repaired the disk. Consequently, I have been able to use that Time Machine disk for subsequent backups.

Oracle error "No message file for" after Upgrade to 10.2.0.5

After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
(with both Users sidadm and orasid)
Platform AIX 64 bit
The installation und Upgrade with dbua works fine.
DB and SAP runs after the Upgrade.
then I tried
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: Message 904 not found; No message file for produstyle='font-
family:courier' ct=RDBMS,
facility=ORA; arguments: ["XX"]
The Environment is correct,
ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
I cant find any failure in Configuration or Install Logs.
So i tried the following:
Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
10.2.0.4 Oracle Installation to the 10.2.0.5 home.
the result ist that the Messagefile could be read by Oracle an i get
the ORA-00904
Here the same Query:
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: "XX": invalid identifier
So I do the same procedure with an other System.
I detect:
the Patch 9952230 (SAP_102051_201011/9952230) delivers
both Message Files oraus.msg and oraus.msb which caused the problem.
Has anyone the same Problem?
Are there any other Impacts with wrong Message Files .
I raised a OSS Call, but no answer till today.
best regards
Uwe

I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
Download link:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
You can find more details also in:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
The problem with this solution. It is not officially released by SAP.

Error reading from file glibc-2.5-24.i686.rpm RHEL 5 Setup stuck at 80%

Hi, I am installing Oracle 10g on RHEL 5 (Red Hat Enterprise Linux 5) machine I am facing two problems
1) while installing the rpm packages the following package gave an error
Error reading from file glibc-2.5-24.i686.rpm
2) I still gave a try to runInstaller command the installer opened but was stuck at 80%
I have 3 GB ram and 320GB hard drive I am not sure what to put in the swap memory and other settings i blindly followed instructions given here
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
What could be the problem where do I find the error log if its created
Please help me
Thanks
Edited by: 891355 on Nov 6, 2011 12:06 PM

I found the installActions file in the installer folder and I think this could be the problem
INFO: The 'shiphomeproperties.xml' file is missing from shiphome location '/home/oracle/Desktop/database/install/../stage/products.xml.' Add this file to the 'Disk1/stage' directory of the shiphome.
though I am attaching the log file for more details do you think the installer is corrupt :(
InstallActions log file ==> http://www.mediafire.com/?nh7mx7bxqht9ovu
Edited by: 891355 on Nov 6, 2011 1:35 PM

Error reading wsdl file excepetion null

Hi
I am trying to invoke a proxy service (web service) wsdl from a bpel process. When i add a web service adapter, put url of external web service and save it, all my service end points defined in the BPEL process are becoming non editable. Binding of operation is changing from web service to HTTP binding for all end points. When I try to edit any partner link, Jdev throws an error " error reading wsdl file excepetion null " for local services. For external service, even though i am refering to a url on the server, it points to " C:\Oracle\Middleware\jdeveloper\jdev\bin\...\xxxx?WSDL" and throws same error " failed to read wsdl file(System could not find the path specified". I am just clueless as to why this is happening. Any help is much appreciated.

Try the SOA Forum - SOA Suite

\\Error Reading Rules File when dimbuild with DLR

Hi
I am using Essbase 11.1.2.1.
I create a DLR via the web console EAS (11.1.2.1 too) : a very simple one : dimbuild DLR, ";" as separator, 2 fields (parent and child)
when i try do do a "Update Ouline..." with a very simple file (1 line : accounts;test) I have this error message "\\Error Reading Rules File"
I don't know if it can help but if I create the same DLR on another 7.1 essbase serveur through this same wec eas console (11.1.2.1), I have no problem...
another information, too : my 11.1.2.1 server has a //ESS_LOCALE English_UnitedStates.Latin1@Binary ESSLANG. My 7.1 server has a //ESS_LOCALE French_France.ISO-8859-15@Default ESSLANG. I really don't know if there is a link, or absolutely not.
Thanks in advance for your help!
Fanny

unable to load essmsh.exe : the error message seems to indicate that it is a problem with a path in the environment variables.
So if you say that the "Error Reading Rules File" is typically a path issue, all is probably linked!
The admin will probably correct that tomorrow : I let you know if it solves the problem!
Thanks!
Fanny

Error reading product file driver files

When attempting apply a large merge patch I receive the following error:
Screening out files not valid for this installation...
Determining valid on-site files...
AutoPatch error:
The following file is missing:
/oracle/prodappl/pa/11.5.0/admin/driver/pasb038.drv
AutoPatch error:
Error reading product file driver files [complete; make tapes]
AutoPatch error:
Error determining valid on-site files
Any ideas?
I've tried using options=noprereq option, but that didn't help.

- Try to restore the file from a backup you have Or just copy it from any other environment.
- Make sure that you have included all pre-req patches in the merged file.
I've tried using options=noprereq optionBy this you tell adpatch not to check for pre-req, use 'options=prereq' instead.

Error reading zip file in Java 6

We have a bespoke installer program that fails, intermittently, in Java 6 on Windows. After installing some files, it then fails with a stack trace like this:
java.util.zip.ZipException: error reading zip file
     at java.util.zip.ZipFile.read(Native Method)
     at java.util.zip.ZipFile.access$1200(ZipFile.java:29)
     at java.util.zip.ZipFile$ZipFileInputStream.read(ZipFile.java:447)
     at java.util.zip.ZipFile$1.fill(ZipFile.java:230)
     at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:141)
     at java.io.FilterInputStream.read(FilterInputStream.java:90)
     at com.XXXX.trent.installer.Installer.writeStreamToFile(Unknown Source)
     at com.XXXX.trent.installer.Installer.installFile(Unknown Source)
     at com.XXXX.trent.installer.PatchFileInstaller.installFile(Unknown Source)
     at com.XXXX.trent.installer.PatchFileInstaller.installFiles(Unknown Source)
     at com.XXXX.trent.installer.UpgradeInstaller$TpfAction.run(Unknown Source)
     at com.XXXX.trent.installer.UpgradeInstaller.runActions(Unknown Source)
     at com.XXXX.trent.installer.UpgradeInstaller.install(Unknown Source)
     at com.XXXX.trent.installer.TrentInstall$SoftwareInstallStage.install(Unknown Source)
     at com.XXXX.trent.installer.TrentInstall$UpgradeInstallWorker.install(Unknown Source)
     at com.XXXX.trent.installer.PatchInstall$InstallWorker.construct(Unknown Source)
     at com.XXXX.trent.utils.SwingWorker$2.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)The same code works in Java 5 on the same environments that it now fails in Java 6 (1.6.0_16).
Any ideas?
Thanks.

gimbal2 wrote:
it is not weird, it is a bug in the application. Don't let the upgrade from Java 5 to Java 6 make you believe otherwise.It's a singularly bad exception message though. I would have thought that something from java.util might be a bit more explicit about what the problem is.
Winston

Error in cdr file

Similar Messages

Maybe you are looking for