Error in CF Administrator After Update to 9.0.1

I'm attaching an image of the error I get when I click the first "Settings" Link under "Server Settings" menu. I did some searching but I couldn't find anyone that was having a similar problem.
Any help would be appriciated.
Thanks,
Paul

Hi Wynbelor,
There is a Known Issue with this version of Firefox. Take a look at [https://support.mozilla.com/en-US/kb/latest-firefox-issues#os=mac&browser=fx9 this article] for some steps to resolve the issue.
Hopefully this helps!

Similar Messages

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Version 8 configure error when opening Itunes after updating to V8

I have contacted iTunes several times with no answer to this problem.
Everything was fine until I updated to Version 8, now every time I try and open iTunes it starts with a green bar stops about 3/4 along bar then says you need to restart to configure with Windows.
I restart then it does the same as before yes, DEJA VU.
This VERSION 8 is BUGGED I tell ya!
Any solutions would be appreciated before I delete this software and use something else!
Message was edited by: Version 8 bug
Message was edited by: Version 8 bug

I have a similar problem. After updating to version 8 (October 25, 2008) the itunes icon is plain and clicking it gives an error message (translated) like "This measure is only allowed for installed products".
So I fetch the iTunes801setup.exe and try to install it again by clicking the "Repair" button. It appears to do its' thing and asks me to restart the machine. OK, but after that it's the same again: "This measure is only allowed for installed products".
I don't want to lose all my music, can it be saved?
I guess that I will lose it if I remove iTunes and start all over.

[Solved] 'New' error messages during init after updating initscripts

After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)

alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

Intel RAID error in Device Manager after updating Intel Matrix Storage Console

The latest in my catalogue of problems arose after updating Intel Matrix Storage Console (IMSC) ...
Lost my RAID volume, but both drives were OK. However, IMSC seemed to be freezing, so I thought I'd install the latest version from Intel. Once installed, it gave me errors saying a plug in was not found, followed by messages saying that the SATA and RAID drivers were not installed. Device Manager thinks the drivers are OK, but the yellow triangle with the ! is shown against the Intel RAID driver. Tried un-installing and re-installing the controller, updating the drivers, different versions of IMSC and still get the yellow triangle with the !
I have been having trouble with the RAID0 set up for weeks so wonder if it has finally died? I'm out of ideas. Can anyone help?
This post gives more details of the history and PC configuration: https://forum-en.msi.com/index.php?topic=121960.0

Quote from: NovJoe on 23-March-09, 14:53:31
Why don't you want to follow up with your previous thread?
It'll be confusing when you started multiple threads linking to the issue.
Sorry, I haven't posted here much so I'm not familiar with the protocols. I just thought it would be less confusing to make this a separate issue. I linked them to avoid duplicating info on my config & h/w

Vmware server 2: error in vmware-config after update to kernel 2.6.31

Hi,
After upgrading my system today, vmware-config.pl issues the following error:
/tmp/vmware-config0/vmmon-only/linux/driver.c: In function 'LinuxDriverSyncCallOnEachCPU':
/tmp/vmware-config0/vmmon-only/linux/driver.c:1423: error: too many arguments to function 'smp_call_function'
/tmp/vmware-config0/vmmon-only/linux/driver.c: In function 'LinuxDriver_Ioctl':
/tmp/vmware-config0/vmmon-only/linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:2007: error: too many arguments to function 'smp_call_function'
make[2]: *** [/tmp/vmware-config0/vmmon-only/linux/driver.o] Error 1
make[1]: *** [_module_/tmp/vmware-config0/vmmon-only] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.31-ARCH'
make: *** [vmmon.ko] Error 2
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
Unable to build the vmmon module.
My previous vmware server 2 installation was patched for kernel 2.6.30 according to the information here:
http://communities.vmware.com/message/1286903
Before attempting to run vmware-config.pl I reinstalled with vmware-install.pl.
Thanks.

For reference I post here the solution to the mouse flickering, in case anyone has the same problem:
http://radu.cotescu.com/2009/10/30/how- … mic-koala/
Just follow step 6 to solve the problem.
JAcky wrote:
dabd wrote:hi
following the instructions here http://blog.mymediasystem.net/uncategor … la-x86_64/
Thank you very much, that works just fine.
I have not noticed any strange VM behavior on my Windows XP installation. But I only use it to test websites with IE and it does not run in full screen mode.
Now I only need to find out why Opera is running at 101% CPU load since the update and I will be all set
Thanks again.

Getting two errors when opening attachments after updating to latest version of Thunderbird. First one is exception "cannot call openModalWindw on a hidden win

After the last Thunderbird update 24.4.0, attachments no longer open. Attempt to open attachment flashes a message quickly but not long enough to read. I get the following errors in the error log with every attempt to open a document like word.
[Exception... "Cannot call openModalWindow on a hidden window" nresult: ox80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: resource://gre/components/nsPrompter.js::openModalWindow::line 382" data: no]
resource://gre/components/nsPrompter.js
The second error is
TypeError: this._taskbar is null
resource://gre/modules/DownloadTaskbarProgress.jsm
Under tools I have Word docs set to open with Microsoft Word. What are these errors and why can't I no longer open Word documents?
In addition I also receive multiple warnings at the same time such as Unknown property 'mso-style-type'. Declaration dropped.
{mso-style-type:export-only;
Expected '{' to begin declaration block but found 'WordSection1'.
@page WordSection1
DCar

What happens when you save the attachment to disk and open it with Word?

Error messages... after updating iTunes

When I plug my ipod into iTunes an error message appears that says my ipod maybe corrupt, you may need to restore this Ipod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod. This happened after I just updated to the newest version of iTunes... what do I do to fix it without restoring it?

"If the only copy is on your ipod, you're hosed."
True-dat! I own three USB mp3 players. I have stayed away from "syncing" players for just this reason. My daughter has a Redi player that is supposed to be able to sync with WMP and iTunes, but iTunes doesn't recognize it as a sync-able device (on her Mac or PC) and the Mac won't even recognize that it's plugged in.
Bottom line: You need to 'restore' the iPod in order to use it (sync with it). That means anything you don't have backed up will be lost.

AVFoundationCF.dll error message at launch after updating to iTunes 10.1

Hey,
I did About>Check for updates and installed the 10.1 update and now whenever I try to open iTunes I get the following error:
The procedure entry point AVCFAssetTrackIsExcludedFromAutoselectionInTrackGroup could not be located in the dynamic link library AVFoundationCF.dll
I have tried downloading the full itunes 10.1 64bit installer from the web and installed that but it still shows the same error.
How can I fix this?
Message title was edited by Host

Had the same problem and this worked for me.
This is for Windows XP and may work for others but I don't know for sure.
I checked my Apple Application Support version under the Add Remove programs and it was 1.3.2
I uninstalled it.
I used WinRar to unpack the iTunesSetup.exe then I installed the AppleApplicationSupport.msi file.
Everything work after that.
Hope this helps.
PS This happened on the last upgrade to iTunes as well so...

CUDA error msg on startup after updating?

I updated my CUDA Driver to 4.2.7 (Quadro 4000) and AE CS6 to 11.0.1 yesterday. Everything worked fine all day long.
However when I launch AE today, I'm getting this message. Any ideas why?

I am getting the exact same error message.
And when I check in the preferences I can't pick GPU. It worked fine with 11.0.0, but with 11.0.1 it does not work.
I even upgrade my CUDA past 4.2.7 to 4.2.10 which didn't show up in the control panel, but can be downloaded from NVIDIA's web site, but that didn't help.
And I have tried trashing both the Adobe After Effects 11.0 MC Prefs file and Adobe After Effects 11.0-x64 Prefs, and then tried the entire 11.0 folder in After Effects Preferences, but the problems continues to occur.

(NET IO.SYS) ERROR REPORT OCCURS OFTEN AFTER UPDATE of Win 8 to Win 8.1!

Computer continually freezes and goes into shutdown mode, with error code appearing DRIVER_IRQL_NOT_LESS_EQUAL(NET IO.SYS) and message appears stating Computer has encountered a problem; and needs to shutdown & restart. We have a new HP 500-047cb
desktop model , which is only a few months old. Everything functioned in an excellent manner, until this update for Win 8.1. Now we have this recurring issue, which has been suggested as relating to driver update. Upon checking drivers, have found
everything is up to date. And there no updates waiting to be applied. Can anyone help explain a viable solution? According to Microsoft the Windows 8.1 update was successfully installed! We not experts, but it seems that there is need
for a serious fix or upcoming update to correct operations to best possible system. Understand there is a new update, how soon will be possible to access?
                Thanks for working solution..........
                                Regards
                                      Rev. Jerry L. Robertson (removed)

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Prefered sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default will delete .DMP files upon use.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick

Wi-fi and bluetooth disabled by administrator after update

I recently did the software update on my Q10 and since then I can't access either wifi or bluetooth. I get the message wifi (or bluetooth) disabled by your administrator. Vodafone haven't been able to help and have suggested having the phone wiped back to factory settings (which I'd rather avoid for obvious reasons) Any help please???

dawnshaefer wrote:
No - it says IT policy requires device password to be set.
Aha, so you do have an IT Policy set on the device and that is normally pushed to the phone by your employer or BES IT admin, and you say you have none of that.
So, where did you get the phone?
Did you say this BT and WiFi was not locked down in the past?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't log in as administrator after update

I upgraded to 10.4.8 and now I can't log in as administrator. At the log in screen, it will go away after I enter the passwordand act like it will work, but then the log in screen will appear again. I have a test account that I am still able to log in to. If i try operations that require the administrator password in this account, the password works. I tried turning the automatic log in for the administrator on in the test account and restarting it, but then the gray screen with the circle never goes away. I reset the PMU and now when I log in as administrator, the screen fades to blue, the mouse reappears, and then nothing.

DrRV
After /sbin/fsck -f the volume was repairedDid you run it again until it said it was OK?
-sh: !: event not foundThat's very peculiar. Anyway, just replace that line with
chown root:admin .GlobalPreferences.plist(The "!$" is just a shorthand for the same last argument).
I just get the same initial line:
This is more serious, and means there is no "DisableAutoLogin" key in the file. So I don't understand why you have autologin set.
First let's make sure you have the file (in Single User again):
ls -l /Library/Preferences/.GlobalPreferences*This should show both "/Library/Preferences/.GlobalPreferences.plist" and "/Library/Preferences/.GlobalPreferences.orig". Then I'd like to know why that "!$" didn't work, so
echo $SHELL(that's just out of interest).
If you do have a "/Library/Preferences/.GlobalPreferences.plist", then:
file /Library/Preferences/.GlobalPreferences.plistIf this comes back saying "data", let's convert it to text, if necessary, so you can look at it:
plutil -convert xml1 /Library/Preferences/.GlobalPreferences.plistCheck by doing
file /Library/Preferences/.GlobalPreferences.plistagain, and make sure it now says "XML document text". Then you can examine the file with:
more /Library/Preferences/.GlobalPreferences.plistwhich will display one screenful: a space moves to the next screen, a return moves down one line, a "b" moves back one screen in case you overshoot. "q" quits the more program. Look for the line "<key>com.apple.userspref.DisableAutoLogin</key>" which will be near the end.
Sorry there's a lot to do but if I restrict it to one question per post it would take too long!

Odd error message that started after update to Mountain Lion

Ever since updating to Mountain Lion, I get this error message every now and then:
Nothing in particular seems to cause it, and there isn't a server to which I'm trying to connect. My computer is a mid 2010 MacBook Pro
Can someone tell me what this means in the first place and how I can fix the problem?
Thanks!

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Receiving error new itunes library after update

just updated itunes and can not open itunes. Receiving error message 'new itunes library'
how can i fix ?

I had the same problem. I simply uninstalled 11 completely off my computer. Then went to itunes.com and re-downloaded it. In your music folder there is a folder "iTunes" and in there a sub folder named "Previous iTunes Library." When you uninstall iTunes from your computer this folder remains put and is what retains your music library when you re download and install iTunes.
I never use playlists so I wouldnt know if your playlists are saved.
This is how it worked for me, I'm sure there are other solutions to the problem but this is the route I took. Hope this helps!

Error in CF Administrator After Update to 9.0.1

Similar Messages

Maybe you are looking for