Error in CHARM configuration to move JAVA objects 'The project is not relea

Hi,
I have BI 7.0 (ABAP + JAVA) landscape (i.e. CBD, CBQ and CBP) on SPS12 and SolMan 7.0 (SMD) on SPS14.  My goal is to move both ABAP and JAVA transports through CHARM. I performed following tasks:
1.  Configured TMS by selecting CBD as Transport Domain controller to move Java transports
2.  Configured CHARM for BI landscape to move ABAP transports in SMD and it is working fine
3.  Configured CTS+ to move JAVA transports on SMD instead of CBD because CTS_BROWSER service is not available on CBD due to SPS12. While configuring CTS+ in SMD, I used SIDs for BI Java landscape as reverse SID (i.e. DBC, QBC and PBC) and used mapping parameter to map to original SID.  I used reverse SID because already in SMD (CBD, CBQ and CBP) has been defined for CHARM purpose. Now, I am able to move successfully JAVA transports of BI landscape from SMD.
4.  I am having issue in configuring CHARM on SMD for JAVA transports.  I am following http://service.sap.com/solutionmanager --> Media Library --> TechnicalPapers --> How to Set Up and Use eCTS/ChaRM Solution Manager 4.0 SP12 document.  Following are the steps, I performed to move JAVA transport through CHARM:
     a.  Defined JAVA systems (i.e. DBC, QBC and PBC) in SMSY as Enterprise portal systems
     b.  Defined ABAP system (i.e. Where Transport request is created, in my case it is SMD) in SMSY
     c.  Defined logical component for both ABAP and JAVA systems
     d.  Defined solution manager project by adding two logical components created at step C (i.e. ABAP and JAVA)
     e.  I am getting error when I am trying to activate CHARM and create task list.  The error is as follows:
/TMWFLOW/TRACKN 101: 'Warning: Problems occurred during synchronization of the system landscape'.
If you choose 'Check', the system displays the following message in the results list of the check:
/TMWFLOW/TRACK_N 806: 'No consolidation system found for SMD-200 (project zjava3)'
If you try to create a task list by choosing the relevant pushbutton, the system issues message
/TMWFLOW/CONFIG_UI 017: 'The project is not released. Hence cycle can not be created'.
I found a relevant sap note for this 1054264 but it is not useful me, as it suggest to upgrade SolMan to SPS12 but whereas I am on SPS 14.
Any suggestion are welcome.  Thanks in advance.
Regards
Shiv

Hello
You should first fix the errors you get such as the missing consolidation system
Please see thread [Re: No consolidation system found for SID in solman; or check the forum on the error message "'No consolidation system found for" and you will find relevant information.
I would advise to update your SAP Solution Manager though to one of the latest available levels, there are a lot of fixes and enhancements to Charm (and also availability of quality gate management which gives some of the functionality of Charm but is more compact).
Kind regards
Tom

Similar Messages

  • When I try exporting my movie it says, "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)" I've tried many things including taking out special characters in the title.

    Please Help!

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

  • Overview of Leave --- CREATE OBJECT: The class  was not found., error key:

    Dear Gurus,
    Iam facing this problem that, when i try to open the Leave Overview from the leave request screen. it gives the dump with message
    CREATE OBJECT: The class  was not found., error key: RFC_ERROR_SYSTEM_FAILURE   
    this also creates a dump in the back end.
    The same dump is appearing when i try to view the Check Documents for the same employee from PTARQ.
    Thanks in advance
    Ramnath

    Hi ,
    please find the following solution .it will definitely work .
    If you leave configuration is done.
    There was an incorrect data in your system. To do these please follow following process.
    delete this request using
    PTARQ> Delete documents (RPTARQDBDEl)
    Please read the report documentation before
    deleting the request but it should be safe as it is
    a development system.
    Please delete this with the above information or delete all
    the records for the approver.
    After this,, there will be some incorrect workitem in approver inbox.
    You need to clear that also by Tcode - SWWL.
    ALSO check the leave request workflow of that employee and if there is any error workflow lying in the workflow delete the leave request (which was created with error) Note down the id initiater ( which had error) and in the Test Environment for Leave request (PTARQ) gave the PERNR and delete the documents ( give the id iniater in the document status ).
    To check the error work flow go to SWIA and check for that Workflow (Leave) raised by the PERNR at that duration ( check in IT2001 for the duration) and give it here.
    After deleting it check in the portal for the leave request if any error is occuring when trying to apply for leave.

  • After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

    After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • When I try to share my recently completed movie to Media Browser, the following message keeps popping up: "The project could not be prepared for publishing because an error occurred. (-50)". How do I fix it?

    When I completed my iMovie (after hours of work), I can't move it to iDVD or the Media Browser. The following message always pos up: "The project could not be prepared for publishing because an error occurred. (-50)". What is this and how can I fix this? Please help ... I need to get the completed DVD  in the mail now!! Thanks.

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • When trying to share my movie i get a error message The project could not be prepared for publishing because an error occurred. (-108)" pls help

    when trying to share my movie on Imovie i get the following error. "The project could not be prepared for publishing because an error occurred. (-108)"
    any idea why this has happened? How do i rectify this?

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • I MOVIE won't let me finalise the project. I am getting an error message saying..The project could not be prepared for publishing because an error occurred. (-50)

    I MOVIE won't let me finalise the project. I am getting an error message saying..
    The project could not be prepared for publishing because an error occurred. (-50)
    Can anyone help please and thank you! :-)

    See my suggestion about duplicating the project in this thread:
    https://discussions.apple.com/thread/4949234?tstart=0
    John

  • Each time i try to share my movie to media browser it sais'The project could not be prepared for publishing because an error occurred. (-50)'' how do i get around this

    Each time i try to share my movie to media browser it sais'The project could not be prepared for publishing because an error occurred. (-50)'' how do i get around this

    Hi
    Error -43
    -43
    fnfErr
    File not found; Folder not found; Edition container not found; Target not found
    So Your original is still there ? or did You move or trash anything ?
    Yours Bengt W

  • I am trying to render a movie in ilife 11. Error appears: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (project is too large). It is only 1:39:00. Any ideas? Thanks! Marv

    this error occurs. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (Project is too Long)
    I know this isn't true, as it is only 1:39:31. I have a mac with 160mb and 160 gb available. Could this be the problem? If so how can I remove some things to make room? Thanks!!

    By exporting to the right format a movie of an hour and forty minutes could potentially use up 160 GB, exactly what format are you exporting to. additionally I'm not clear what you mean when you say your mac has 160 MB and 160 GB available.

  • Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

    Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    Trash the Preference file:
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    from: jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    from Karsten S
    Shorter clips than 1,5 sec might be one of the culptrits
    Bengt cont.
    Set-Up might differ
    • Mac OS - most probably X.7 or more
    • iMovie version - more than iM'11 v. 9.0.4
    Action taken
    • Finalizing project - I never do as I never understood the gain to do so
    • Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
    fps - set
    •I only use PAL (25fps)
    Yours Bengt W

  • Error -2002 when importing quicktime movie clips into iMovie Project

    When I import QuickTime movie clips into my project, the scroll bar fills about 1/3 of the way, and then I get this message:
    Can't open file "DSCN0812.MOV"; skipping it and continuing. I CLICK "OK," and then this message appears:
    Error during import
    The file could not be imported: (-2002)
    This happens to every movie clip. Anyone have any idea what's happening here?
    Thanks!

    Paul Kirtley wrote:
    .. file "DSCN0812.MOV"..
    The file could not be imported: (-2002)
    I guess, you try to import 'moving images' from a still cam, right? these are in a codec (=mov is no format, just a container) , iM doesn't support. Use the free tool *Mpeg Streamclip* www.squared5.com to convert these files to 'dv stream' BEFORE importing to iMovie.

  • The project could not be prepared for publishing because an error occurred.

    I have just loaded iLife 09 on my MAC. I've edited a movie and now want to export it, put it in iTunes, whatever I can do to move it beyond my laptop. No matter what option I choose under Share I get the same error message, "The project could not be prepared for publishing because an error occurred. (-2009)". I can find the error message online, but not the (-2009) error code. I'm also a longtime PC person who has just switched to a MAC. Can anyone help?

    I also am having the exact same problem. iMovie '09. I have tried changing permissions on all sharing folders, exporting to desktop, sharing to iTunes in all size files - and yet still get "Unable to prepare project for publishing. error (-2009).
    Mac OSX version 10.6.2 Snow Leopard

  • The project could not be prepared for publishing because an error occurred. (-108)

    Got the following error while trying to share my project:
    "The project could not be prepared for publishing because an error occurred. (-108)"
    I got this error everywhere: share to idvd, share - export movie ...
    Computer: MAcbook Pro 2.3GHz Intel Core I5, memory : 4 GB (when I start exporting the available memory is about 2Gb, no other app runing)
    Softwer: Mac OS X 10.7.2, iMovie '11 9.0.4 (1635)
    Project: 50min, filmed with Gopro 960HD
    Please help!
    Thanks in advance,
    Lóránt

    Most recently there's been a series of errors -49 being posted to the Discussion Group. I've seen one other -108 error that showed up but without any resolution. The original poster hasn't replied yet to that mesage thread. I don't know if the two are related, but they both have a negative effect on exporting. So I'm going to suggest following the fix for the -49 errors:
    This requires using the Terminal app, in your Applications/Utilities folder
    To turn off Time Machine snapshots type in the following command:
    sudo tmutil disablelocal
    The Mac will likely ask for your password, so type it in and hit the return key. The type the word, exit and hit return. Quit Terminal.
    Open iMovie and try doing another export and see if the same error message pops up.

  • Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error code -50) imovie 09 v8.0.6

    When I try to export the movie I get this error code. Im doing a music video and have put days into it and now I can not get it to export! My other small project export with no problem.

    Thanks for the details.  We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export.  My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
    ++++++++++++++++++++++++++++++++++++++++++++++++
    Hello,  We are having a similar problem running iMovie '09.  We get the exact same error as you reported. 
    "Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
    We have a very similar situation were we have multiple repeated clips.  However, our clips are 2.4 's.  Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
    removing title pages
    removing transitions
    removing imported music from iTunes
    removed another clip from another event
    closed all other programs
    closed iMovie, powered off computer, opened iMovie, tried to export
    reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
    When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue.  We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export".  This is a very inefficient way of troubleshooting.
    This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
    Any ideas from any other users would be greatly appreciated.

  • Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list) How do I fix this???

    Unable to prepare project for publishing
    The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
    How do I fix this???
    I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.

    I'm having the same problem. 
    When I export (and I want HD quality) I get the error message that
    Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
    How do I free up more space on my startup disk?  My hard drive has 158.61 GB free.  Do I need to free up more space?

Maybe you are looking for

  • Please help me need urgent help on JPA connectio

    Hi, In my current assignment I'm trying to connect a remote MS Access database using JPA. But I'm not able to connect to database in my desktop itself . Below is my code let me know if I'm doing something wrong. persistence.xml ========= <?xml versio

  • Raw files from Nikon d810 won't import

    I have LR 5.7 and  new Nikon d810. Every time I try to import raw files, it doesn't work. Just stalls, and sometimes even crashes. I've tried different memory cards, a card reader, and importing directly by connecting the camera itself. Please advise

  • Performing a Find/Replace for an entire Folder of html files

    Hello, I have been working away on adding an include to my html pages and getting the code all set up for a header and footer. With lots of help from kind people on this forum I finally have it working! Now I want to add this to an entire folder of 5

  • I already replaced the battery in my iPod nano, can I still get the replacement?

    I applied for the replacement of my iPod nano, 1st gen. I replaced the battery myself a couple of years ago. Can I still get the replacement? I'm still waiting for my box to send the nano back in but don't want to send it if it's just going to get re

  • Keyword  icon in library - hovering shows keywords

    When hovering over the keyword icon in the corner of the image, I would like to see a floating box pop-up showing the actual keywords that have been applied to that image, rather than just the pop-up message that 'This Photo has Keywords' or whatever