Error in Check Printing for printing checl in foreign currency

Hi,
I am getting the following error if I print check in foreign
23.03.2007 11:35:30 Following foreign currency checks could not be printed F0 255 S
The error F0 255 says,
The symbol for the currency key is missing in form ZCHECK_UNN_NEW
Message no. F0254
Diagnosis
A check is only issued in foreign currency if the symbol &REGUD-WAERS& for the currency key was used in the CHECK window of the ZCHECK_UNN_NEW form.
System Response
The payment media affected were not issued.
Procedure
If it is possible to print the currency key on the check, then correct your YCHECK_UNN form correspondingly and repeat the print run.
If the form is, however, only defined for local currency checks, then the payment method configuration must be corrected in the company code. The payment method may not be allowed for foreign currencies.
Proceed
Please help me to fix this error. I would really appreciate.
Regards,
Sanjeev

hi
in the smartforms for the quatitity and currency fields u will get this error when u r printing the value..
to avoide this create program line and move the value into a character type field then print character field.

Similar Messages

How to pass a smartforms to a local printer for printing

I have converted my smartforms to PDF.
I need to pass the PDF to a local printer for printing the PDF.
How can I achieve that?
Any tips in this issue will be of great help.
Thanks
Surkumar

Hi Surkumar,
plz go through this link
To send the output thro
Thanks
Mohinder

Best printer for printing DVDs

I've been an Epson user for many years. But I've always had mixed results printing on discs. Lately my printer rejects the disc about 4 out of 5 times I attempt to print. I have the stylus Photo R340.
The Epson software & support seem VERY dated.
So what is everyone using to print DVDs?
Any advice would be appreciated.
Thanks
g

After putting up with an Epson Stylus Photo printer for several years and dealing with lots of poorly printed and ruined DVD's using this printer. I recently purchase a Canon IP4500. Canon printers sold in the U.S. (for licensing reasons) do not (out of the box) support printing to DVD. The Canon printers sold in the U.S. ARE capable of printing to DVD's. By using Google and eBay I was able to buy an inexpensive tray for loading DVD's and inserting them into the IP4500 and find a video showing a few easy steps that reprogram the Canon IP4500 for printing to DVD using Canon's PrintCD software. This took less than 10 minutes to do and was very simple.
I have now printed over 30 DVD's with the Canon IP4500 without a single problem. It just works, perfectly every single time! I purchased the printer from Amazon, the CD tray off of eBAy, and found the video on how to prepare the printer for printing to DVD's online using Google. I highly recomend going this route.
Tom

Material valuation difference in FI and MM area for P.O in foreign Currency

Seek assistance in solving the following issues related to P.O in foreign currency. Thanks in advance
1, For purchase orders in foreign currency, during MIGO,in the FI document, the inventory value which include cost payable to the vendor, taxes, CHA and freight are calculated in foreign currency and the company code currency value is arrived by multiplying the total inventory value with the exchange rate prevailing in Ob08 on the posting date of MIGO, instead of adding the values of basic price converted to local currency at the rate prevailing on MIGO, Custom duty at the rate prevailing on Customs Miro and Freight CHA etc which are inputted in local currency and converted to P.O currency in P.,O, at the exchange rate in P.O
The value thus arrived is different from the actual value paid since the freight and CHA are in co code currency in the P.O and converted to P.O currency in P.O with exchange rate prevailing on the date of P.O and Custom duty paid in local currency is at the rate prevailing on Custom MIRO.
2, Freight and CHA are entered as condtions in the P.O and the values entered in local currency. These are converted to P.O currency by the system at the exchange rate prevailing on the P.O date. During MIGO in the FI document the values for these are arrived by multiplying the value in P.O currency with the exchange rate prevailing on MIGO. for e.g. the CHA lumpsum entered as INR 20,000 is converted to $ 400, assuming the OB08 rate on the date of P.O is 50. if on the date of MIGO OB08 is 60, during MIGO, in the FI document entry for local currency the CHA charges become 24000. ( 400 x 60 ). While the actual amount is 20,000. the same scenario exist for freight too which is entered in local currency.
WHAT IS HAPPENING
1. Foreign Vendor - Foreign Currency X OB08 rate on MIGO Posting Date
2. Freight - Company Code Currency Converted to Foreign Currency as per OB08 rate on PO Creation Date X OB08 rate on MIGO Date
3. CHA - Company Code Currency Converted to Foreign Currency as per OB08 rate on PO Creation Date X OB08 rate on MIGO Date
4. Customs - Company Code Currency Converted to Foreign Currency as per OB08 rate on Actual Customs Payment Date X OB08 rate on MIGO Date
WHAT IS REQUIRED
1. Foreign Vendor - Foreign Currency X OB08 rate on MIGO Posting Date
2. Freight - Company Code Currency Converted to Foreign Currency as per OB08 rate on PO Creation Date X OB08 rate on PO Date
3. CHA - Company Code Currency Converted to Foreign Currency as per OB08 rate on PO Creation Date X OB08 rate on PO Date
4. Customs - Actual Customs Duty paid in Company Code Currency through Customs MIRO

Hi
i am still waiting for someone to put a comment on this thread
regard
Nabil

I keep getting errors when uploading album for printing

I keep gettingnerrors when uploading iphote album for printing. help!

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How to set up postscript Printer for printing graphics

We have a requirement to print Structured graphics. I found out that we need to set up a postscript printer for it. After debugging I found out that the Device Type name should be either GRAPHICS or POSTGR or ZGRAP.
How can we set up such a printer?
Thanks in adv.

Hi,
The Device Type names that you have provided are not listed in the SAP Central Note for Printers/device Types
https://service.sap.com/sap/support/notes/8928
However, you can again re-check this note with your printer model and check what suitable device types should be used. As you will find inthis note:
"Device type definitions are stored completely in tables and can be individually adapted, modified or enhanced. If SAP performs such an adjustment for a customer, it constitutes a consulting service, and is generally charged seperately"
SAP has now released the SAP Printer Vendor Program - https://service.sap.com/sap/support/notes/1130927, printer manufacturers can develop and release device types for their printers.
https://service.sap.com/sap/support/notes/1100779 contains a list of all participants
Information about the support for new printer models is contained in the "Printer Vendor Wizard Note" of the relevant manufacturer. A complete list of all "Printer Vendor Wizard Notes" is available in Note 1097990. If your printer model is not listed in one of these "Printer Vendor Wizard Notes", proceed as described in Note 1103826.
- Regards, Dibya

Regarding to Outlook facing the problem. error show check online for a solution and close the problem

Dear Team,
Please solve this problem.
Open the outlook then show below error.
1. Check online for a solution and close the problem
2. Close the program
Please do the needful as well as possible.
Thanks & Regards.
Devesh Yadav
9999815203

Hello,
So Outlook has failed to launch and an error dialog (error reporting) pops up. A lot of things can cause this issues.
One of the main causes is a corrupt Navigation Pane settings file. You might need to start Outlook using the /resetnavpane
switch. Just run command (Windows key + R), type or paste:
outlook.exe /resetnavpane (Please note that you will lose any customizations on the navigation pane)
In certain cases, a corrupted data file will also cause this problem. So, if the /resetnavpane switch doesn't really work, please try to repair your data file with
scanpst.exe tool:
http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx
If these cannot fix your issue, please be more specific on the error. Please click the button at the bottom of the error pop ups and copy the
Problem signature here.
Thanks,
Ethan Hua CHN
TechNet Community Support

Using LP01 printer for printing smartforms in BSP

Hi fellow BSPers,
I have developped a BSP application in CRM which allows users to have a consolidated view on the data in an order.
Also there is a button which can print a smartform of the order using the PostProcessingFramework of CRM.
It works great but...
For printing the user needs to use a printer which is defined in the system.
As expected most users would like to print on the printer they defined in windows as their default printer. From SAPGUI this can be done using printer LP01 which sends the spool to the client printer deamon.
Does anybody know how I can use this deamon via BSP?

I hit similar requirements in the past. You can't use LP01 because it needs the Gui Framework to communicate with the frontend of course.
I like the solution of converting the SmartForm (or Sapscript or Adobe Form for that matter) to PDF. I then display the PDF out of the BSP application (there are several weblogs on different techniques for displaying PDF and Non-HTML documents - I like the ICM Cached Response and IFrame approach). The user then can print the PDF with their local printers (or email the document, or save it, etc). This give considerable flexibility.

Printer for printing directly onto dvd's

Can anyone provide recommendations on a printer that will print directly onto dvd's and is compatible with the macbook pro? Best Buy recommended a cannon for $100 and he said it is wireless and compatible. Thoughts?

To be a little clearer, your printer may accept the disk for printing, but the page size will still be a paper size, rather than something that says "DVD" or "CD". The documentation for your printer should tell you what the settings should be, and how to adjust the placement of the image so it is centered on the disk.

Error when using automatic clearing (F.13)with foreign currency valuation.

Hello all
below is our problem, please suggest us a solution
We are experiencing a problem when running the automatic clearing in SAP. Somehow, the system seems to clear (with no reason) open items created with the revaluation of foreign currency.
Let's say that we run the valuation of open items in foreign currency for December 31, and we run the program to post the reverse entry as of January 1 of the next year. As a result of this valuation, the system calculates a loss of 10 euros. Therefore, it posts a document with a debit entry of 10 into the Loss account, and a credit of 10 in to account where the valuation was carried out. This document has a posting date of December 31. The batch program also creates the reversing entry, this time a credit entry into the Loss account, and a debit into the original account.
If now, we try to run the automatic clearing (F,13) on December 31 for those accounts, the system will create (automatically) a document on December 31, similar to the reversing entry that the valuation created, clearing at the same time, the first document that the valuation originally created.
The final result then is that the valuation makes a posting, and we end up having two reversing entries. Does it make sense?
In our scenario in the system P70, for MX10, we have a foreign currency valuation run on December 31st, which posted the document numbers:
1) 5100004579/2008, for a total of 0 euros, and 240,483.17 MXN. Credit to account 11081108 Finavigate cash receipt bank collect.CMG MXN.Debit to account 18601000 Losses f.foreign curr.valuation on financial trans
2) In the same batch, the system also books a reversing entry (doc 5100000042/2009) with posting date 01.01.2009 with exactly the same opposite entries as in the previous document.
3) After this, we run the automatic clearing with posting date 31.12.2008, and now, the system creates automatically the document 5000003236/2008, which clear the original document, 5100004579.
The final result, as you can see, it's out of balance, there is an additional document that we need to reverse.
Thanks in advance
sujatha

To my knowledge you get do two things:
1. In F.13 transaction don't include both the GL accounts where the Dr. and Cr. posting from the valuation run have taken place. With this the system won't find the matching entry.
2. If you want to use all the GL accounts in F.13, then check the clearing procedure configuration and make suitable changes.
With the info provided, this is the only thing I can suggest.
Regards,
~Vishal.

Pricing for BP working in Foreign Currency only (differs from Sys. Curr.)

Hello,
a vendor is setup with currency = Euro
The issue is that when creating a marketing document the item price
shows/loads is in USD ( The Total Doc is the total amount in Euro).
When I go into the line item and change the Item Price it changes the currency to Euro.
The item is purchased only from this vendor and all transactions ar handled in Euros.
The questions I have are for SAP Business One 2005 SP01 default system:
Can I have the line item loaded with the Euro Price - in the Item Price and not the USD?
Is there a way to have a price list with Euro or any foreing Currency different from the system currency?
Can I setup special prices for the BP and the items in Euro /Foreign Currency?
Thank you,
Massi

Hi Massi,
you will need to create a EUR price list & link that to the BP :
To create a price list(PL) in a currency different from the local currency (LC) follow the steps below:
1. Go to stock management -> Price Lists -> either rename an existing PL orcreate a new one by clicking on Data -> Add row or pressing Ctrl+I.
2. Give the PL an appropriate name, e.g. 'Euro Price List'.
3. Select itself as Base Price List.
4. Set a factor of '1'.
5. Set a rounding method as appropriate.
6. Assign an appropriate authorisation group.
7. Click on 'Update.
8. Double-click on the row number of the new PL.
9. Enter the item prices with the 3 digit prefix of the currency, here EUR.
10. Update after each price entered.
11. Assign this PL to the apprpriate business partners (BP) under Business Partners -> Business Partner Master Data -> select BP -> Tab Payment Terms -> select from drop down list in 'Price List' field.
Just keep in mind that this PL cannot be based on any PL that is not kept in EUR, hence it must be updated manually.
All the best,
Kerstin

Error while checking configuration for adobe

Hi,
when iam checking this
with below steps
1. Log on to your SAP Net Weaver AS ABAP.
2. Call transaction SA38 and enter the name FP_TEST_00.
3. Choose Execute (F8). A dialog box is displayed.
4. Enter FP_TEST_00 in the field Form.
This is displayed as the default form name.
5. Enter the name of the connection to the ADS. Enter the default name ADS, or, if you have specified another name, the one you are using in your system.
6. In the dialog box, choose Output in Print Preview.
7. Enter an appropriate device type in the field Output Device.
8. Choose Print Preview.
Iam getting an error stating CALL CONTAINED ERRORS ADS(2)
please suggest a solution

Hi Venkat,
Maybe this [thread|Request for External staff: Qualification Profile; will be helpful for you.
Regards,
Arafat

Unable to specify printer for print jobs in Java7 for OSX

Hi, I'm developing a simple software that would monitor a folder for new documents and print them automatically. Monitoring the folder was the easy part with WatchService in Java7, but I'm running into problems with printing. Namely, I'm using java.awt.print.PrinterJob to print the document, but the print job is always sent to the default printer, instead of the printer that was specified.
PrinterJob pPrinterJob = PrinterJob.getPrinterJob();
PrintService[] psArr = PrinterJob.lookupPrintServices();
for (PrintService ps : psArr) {
if (ps.getName().equalsIgnoreCase(specifiedPrinterName)) {
pPrinterJob.setPrintService(ps);
break;
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
//specify print attributes....
pPrinterJob.print(pras);
The code looks simple enough, and calling getPrinterService() returns the intended printer after specifying it using setPrinterService(). However, regardless of the printer specified, the print job is still sent to the default printer. Tried on both Java 7 Update 4 and Update 6 for OSX with the same result.
Update: Got my hands on a Win XP machine and tried out the same piece of code using Java 7 Update 6 for Windows. Guess what, the print job was sent to the specified printer! I'm pretty sure this is an OSX specific issue now. Has anyone come across this issue previously?

Hi,
I have the exact same problem on OS X 10.8.2 with Java 1.7.0 Update 21.
When I call PrintServiceLookup.lookupPrintServices(null, null) I get three distinct printers, but no matter which of the three I specify, the print job is sent to the default printer.
The code works as expected when tested on Windows and Linux machines.
Any help is appreciated!

How to stop auto from-feed on a dot matrix printer for printing only a single line of data at a frequency of 30 seconds

Hello friends
In a particular application, it is required to print a single line of data on a dot matrix printer (continuous sheets) at a frequency of 30 seconds. That is printing is to be carried out line-by-line on the same form without a form feed.
We are facing a problem of a form feed after printing of each line. Kindly help me to solve this problem of auto form-feed. How to continuously print at a regular interval without from-feeding.
Shahid Baig

Is this printer connected to a network?
You may need to look at the printer manual to see if there is a setting for a form feed. I remember when we had a dot matrix printer on the network about 12 years ago, there would be a network timeout setting of something like 30 seconds. So if you didn't continue to send data, the network will end the print job and send the file to the printer which would auto form feed at the end. Many of our basic programs had to be rewritten because they would do an LPRINT periodically, if you took along time progressing through the inputs, you would easily hit the 30 second timeout. So all the programs had to be rewritten to save the data to be printed to a file, and only once you execute a print command, it would read the file back in and Lprint it (or a Print#1) to the LPT port.
Since the printer was on the network, and basic could only print to LPT's, we had to use a net command to capture the LPT1 port and direct it to the network queue.
I don't remember all the details, but those are the bits and pieces I do remember. I think the answer to your problem lies in there somewhere.
Namely:
1. Printer setting to auto form feed.
2. Network setting that closes print job after timeout period.

Issue while selecting the LOCL printer for printing the form

Hi all,
I have created the PO form and it is working fine.
I am facing one strange issue.
I am displaying the PIR text and item text in the form.
When i do the print preview the PIR text and Item text is displayed but when i create the spool for the same PO by
giving the printer as LOCL these text is not displayed.
I am not getting why it is coming when i do the print preview and why it is not coming while creating the spool.
Kindly help.

Hi,
You did not specified the form Type whether it is a smart form or Adobe form.
If it is the Adobe form LOCL is not supported if the printer specified to LOCL is not supporting the PDF forms.
Better use LP01 or any other Printer which support the PDF forms.
Thanks.
UmaS.

Error in Check Printing for printing checl in foreign currency

Similar Messages

Maybe you are looking for