Error in CJ40 Transaction

Dear Experts,
Need your help in sorting out the following issue.
I am trying to do cost planning using the tcode CJ40 and am following the steps mentioned below,
1) I created a cost element group in KAH1. All the cost elements have been created in the same controlling area and i have checked the validity of these cost elements.
2) I assigned this cost element group in transaction OPSB.
3) Now ,when i am executing transaction CJ40 and clicking on the Primary Costs button i am getting an error as "Group cannot be used"
I feel i have followed the right path to achieve my motive. Request you experts to kindly correct me and help me in solving this issue. I have checked whatever i could from my side.
Also would request you guys to throw some light on the concepts of "Planner Profile" and Planning Layout"
Thanks & Best Regards,
Gokul

Dear Murali,
Thanks for your response.Here are the answers for your questions,
1. Make sure that the name of the cost element group is correct...
Yes it is correct and i tried testing this scenario by creating a new cost element group with just 2   cost elements. Still i am getting the same error.
2. When you enter CJ40, is the controlling area set to be the same as the controlling area of the cost element group? And, is the project in the same controlling area?
Yes Murali the controlling area for both the cost element group and the project is same and i ahve verifired this. I have even checked the validity of the cost elements.
I will send u all the requried screenshots provided you give me your address coz ur business card does not have your address. Thanks neway Murali. Waiting for a response from ur side.
Regards,
Gokul

Similar Messages

  • Error while executing transaction in logic editor

    Hi all,
    When i try to execute a transaction in logic editor in my system i get the following error.
    [DEBUG]: Transaction Complete.
    [ERROR]: Error executing transaction Status (403):ok
    But when i try to exectue the same in a different system,the transaction is sucessfully executed.could anyone help me out with is issue!

    U better try to clear the cache enteries and try this.it may help

  • Error while sending transaction

    Hi All,
    We are facing below error while sending transactions,
    We are able to send successfully OAGIS file to supplier using custom documnet over internet, but in the reports after couple of sceond it showing one blank error.
    EX:
    Machine Info: (usstlz-pinfwi11)
    Description: Unable to identify the document protocol of the message
    StackTrace:
    Error -: AIP-50083: Document protocol identification error
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
         at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
         at java.lang.Thread.run(Thread.java:534)
    If I check the payload it showing empty and wire message is below
    Date=Tue, 23 Feb 2010 11:59:38 GMT
    Server=Microsoft-IIS/6.0
    X-Powered-By=ASP.NET
    Content-Length=0
    We are ableto receiving a MDN back from them.
    Could you please tell what we need to set in below for both inbound and outbound transactions
    Functional acknowledgement required?
    Is acknowledgement handled by Integration B2B?
    for custom document over internet...
    p[lease help me to resolve this
    Regards
    cnu
    Edited by: B2B_GoToGuY on Feb 23, 2010 4:36 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Anuj ,
    here is the log and i send it ur ID also
    Parameters
    -- listing properties --
    http.sender.timeout=0
    2010.02.22 at 10:03:53:844: Thread-20: B2B - (DEBUG) scheme null userName null realm null
    2010.02.22 at 10:03:57:590: Thread-20: B2B - (DEBUG)
    Protocol = HTTP
    Version = HTTP/1.1
    Transport Header
    Date:Mon, 22 Feb 2010 16:03:57 GMT
    X-Powered-By:ASP.NET
    Server:Microsoft-IIS/6.0
    Content-Length:0
    2010.02.22 at 10:03:57:594: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Message Successfully Transmitted
    2010.02.22 at 10:03:57:597: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Send Successful!, Request Message sucessfully Transmitted
    2010.02.22 at 10:03:57:600: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling postTransmit to do post transmit processing of request message
    2010.02.22 at 10:03:57:602: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
    2010.02.22 at 10:03:57:605: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
    2010.02.22 at 10:03:57:607: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
    2010.02.22 at 10:03:57:610: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Enter
    2010.02.22 at 10:03:57:613: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit AckMode is SYNC
    2010.02.22 at 10:03:57:615: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
    2010.02.22 at 10:03:57:657: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
    2010.02.22 at 10:03:57:660: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Update the Message Table Row with message state Wait for Incoming Acknowledgment
    2010.02.22 at 10:03:57:679: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Commit
    2010.02.22 at 10:03:57:683: Thread-20: B2B - (DEBUG) DBContext commit: Enter
    2010.02.22 at 10:03:57:690: Thread-20: B2B - (DEBUG) DBContext commit: Transaction.commit()
    2010.02.22 at 10:03:57:693: Thread-20: B2B - (DEBUG) DBContext commit: Leave
    2010.02.22 at 10:03:57:695: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
    2010.02.22 at 10:03:57:697: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
    2010.02.22 at 10:03:57:699: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
    2010.02.22 at 10:03:57:702: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
    2010.02.22 at 10:03:57:711: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
    2010.02.22 at 10:03:57:713: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Enter
    2010.02.22 at 10:03:57:715: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Exit
    2010.02.22 at 10:03:57:718: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
    2010.02.22 at 10:03:57:721: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Enter
    2010.02.22 at 10:03:57:723: Thread-20: B2B - (DEBUG) MimePackaging:doUnpack:Enter
    2010.02.22 at 10:03:57:726: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
    2010.02.22 at 10:03:57:728: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
    2010.02.22 at 10:03:57:731: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@7cb44d
    2010.02.22 at 10:03:57:733: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
    2010.02.22 at 10:03:57:735: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Exit
    2010.02.22 at 10:03:57:738: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
    2010.02.22 at 10:03:57:740: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
    2010.02.22 at 10:03:57:743: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
    2010.02.22 at 10:03:57:746: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {HTTP}
    2010.02.22 at 10:03:57:749: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage remote host name = null
    2010.02.22 at 10:03:57:752: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage host name = null
    2010.02.22 at 10:03:57:754: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
    2010.02.22 at 10:03:57:757: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = 127.0.0.1
    2010.02.22 at 10:03:57:760: Thread-20: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
    2010.02.22 at 10:03:57:762: Thread-20: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
    2010.02.22 at 10:03:57:764: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
    2010.02.22 at 10:03:57:767: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
    2010.02.22 at 10:03:57:770: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
    2010.02.22 at 10:03:57:772: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP 127.0.0.1
    2010.02.22 at 10:03:57:775: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
    2010.02.22 at 10:03:57:777: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
    2010.02.22 at 10:03:57:779: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
    2010.02.22 at 10:03:57:781: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
    2010.02.22 at 10:03:57:784: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
    2010.02.22 at 10:03:57:786: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
    2010.02.22 at 10:03:57:800: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
    2010.02.22 at 10:03:57:803: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
    2010.02.22 at 10:03:57:805: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
    2010.02.22 at 10:03:57:893: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument errcode = SetData failed - CECToolsException thrown - HRESULT[30005], description[The size of blob is wrong: must be greater then zero]
    2010.02.22 at 10:03:57:897: Thread-20: B2B - (ERROR) com.edifecs.shared.jni.JNIException: SetData failed - CECToolsException thrown - HRESULT[30005], description[The size of blob is wrong: must be greater then zero]
         at com.edifecs.shared.jni.xdata.INativeToXData.SetDataNative(Native Method)
         at com.edifecs.shared.jni.xdata.INativeToXData.SetData(Unknown Source)
         at com.edifecs.shared.jni.xdata.INativeToXData.SetData(Unknown Source)
         at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.identifyIncomingDocument(EDIDocumentPlugin.java:367)
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3226)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
         at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
         at java.lang.Thread.run(Thread.java:534)
    2010.02.22 at 10:03:57:900: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument Enter
    2010.02.22 at 10:03:57:956: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
    2010.02.22 at 10:03:57:958: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
    2010.02.22 at 10:03:57:961: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument continuing
    2010.02.22 at 10:03:57:964: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
    2010.02.22 at 10:03:57:967: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
    2010.02.22 at 10:03:57:970: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
    2010.02.22 at 10:03:57:972: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
    2010.02.22 at 10:03:57:975: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
    2010.02.22 at 10:03:57:978: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
    2010.02.22 at 10:03:57:981: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument continuing
    2010.02.22 at 10:03:57:983: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
    2010.02.22 at 10:03:57:986: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
    2010.02.22 at 10:03:57:988: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
    2010.02.22 at 10:03:57:990: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
    2010.02.22 at 10:03:57:993: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument Exit
    2010.02.22 at 10:03:58:000: Thread-20: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
         at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
         at java.lang.Thread.run(Thread.java:534)
    2010.02.22 at 10:03:58:004: Thread-20: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
         at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
         at java.lang.Thread.run(Thread.java:534)
    2010.02.22 at 10:03:58:006: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
    2010.02.22 at 10:03:58:009: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
    2010.02.22 at 10:03:58:011: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50083: Document protocol identification error
    2010.02.22 at 10:03:58:013: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
    2010.02.22 at 10:03:58:016: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {Date=Mon, 22 Feb 2010 16:03:57 GMT, X-Powered-By=ASP.NET, Server=Microsoft-IIS/6.0, Content-Length=0}
    2010.02.22 at 10:03:58:018: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
    2010.02.22 at 10:03:58:021: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
    2010.02.22 at 10:03:58:024: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50083: Document protocol identification error
    2010.02.22 at 10:03:58:027: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
    2010.02.22 at 10:03:58:030: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
    2010.02.22 at 10:03:58:032: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
    2010.02.22 at 10:03:58:036: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
    2010.02.22 at 10:03:58:040: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
    2010.02.22 at 10:03:58:054: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
    2010.02.22 at 10:03:58:061: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
    2010.02.22 at 10:03:58:087: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
    2010.02.22 at 10:03:58:089: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
    2010.02.22 at 10:03:58:129: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
    2010.02.22 at 10:03:58:132: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value Generic Identifier127.0.0.1
    2010.02.22 at 10:03:58:187: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
    2010.02.22 at 10:03:58:242: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
    2010.02.22 at 10:03:58:277: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
    2010.02.22 at 10:03:58:280: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
    2010.02.22 at 10:03:58:282: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
    2010.02.22 at 10:03:58:295: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = 0A10482B126F66BB0BC000001BE47920
    2010.02.22 at 10:03:58:298: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
    ** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
    2010.02.22 at 10:03:58:307: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
    2010.02.22 at 10:03:58:311: Thread-20: B2B - (DEBUG) Engine:notifyApp Enter
    2010.02.22 at 10:03:58:324: Thread-20: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>null</correlationId>
    <b2bMessageId>0A10482B126F66BB08B000001BE47910</b2bMessageId>
    <errorCode>AIP-50083</errorCode>
    <errorText>Document protocol identification error</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (usstlz-pinfwi25.dev.emrsn.org)
    Description: Unable to identify the document protocol of the message
    StackTrace:
    Error -:  AIP-50083:  Document protocol identification error
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
         at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
         at java.lang.Thread.run(Thread.java:534)
      ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    </Exception>
    2010.02.22 at 10:03:58:344: Thread-20: B2B - (DEBUG) Engine:notifyApp Exit
    2010.02.22 at 10:03:58:347: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-50083: Document protocol identification error
    2010.02.22 at 10:03:58:350: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
    2010.02.22 at 10:03:58:352: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
    2010.02.22 at 10:03:58:355: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Exit
    2010.02.22 at 10:03:58:358: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Exit
    2010.02.22 at 10:03:58:360: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
    2010.02.22 at 10:03:58:363: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
    Edited by: B2B_GoToGuY on Feb 23, 2010 4:57 AM

  • Settlement G/L account Error in CJ88 Transaction

    Hi
    i am receiving error in CJ88 transaction when I am trying to settle cost. I have created default settlement rule on WBS by enhancement, The G/L Account is also balancesheet account. Error message-- G/L account is not assigned to controlling area.
    Please suggest the soulution. Thanks

    Hi,
    Can you  elaborate the error in detail,
    You want settle the WBS to GL right?
    The GL which you are setting the same GL is getting error.
    You have checked the GL in FS00 or FSP0, If you have not checked in FS00 then check in FSSo whether it is extended to Company code.

  • Error in MIRO transaction

    hi,
       I am getting following error in MIRO transaction ....Can anybody please fix this ?
    "In company code 3000, the number range 51 is missing for the year 2008"
    Regards
    Vijay

    HI,
    Please check the nuber ranges whether that has been selected as external for the Invoicing.
    If external then please check whether the said no range starting from 51 is included in the external no assignment or no?
    If not then yiu may have to add the same no range and then check.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • Error "Balance in transaction currency" using T.code J1iex

    Hello all,
                When i am capturing an excise invoice using T.code J1iex, the excise invoice is getting captured, but when we are trying to post the vendor using the same T.code j1iex,it is giving an error"Balance in transaction currency". Please help me and try to solve my problem asap.

    Hai,
    1.Flag the check box for rounding duty on procurement in IMG - Logisitics general - Tax on goods & mvts - India - Basic settings - Company code settings.
    2. Manually round off the excise values to next value in J1IEX - Change mode - item level - excise values.

  • [Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

    I have an package with source , data flow and destination to execute on begin and commit.
    in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
    on execution, i get error as
    [Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
    property not set correctly, parameters not set correctly, or connection not established correctly.
    as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
    Kindly advice on what has to be done.
    ShanmugaRaj

    To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
    Narsimha

  • Conversion error in J1IEX transaction

    HI all,
    We are doing upgrade from 4.6C to ECC 6.0. After upgrade, when we tried to execute the tcode J1IEX, it returns the following error.
    That is, in J1IEX, we select Capture Excise Invoice -> Goods Receipt -> GR number. After entering this GR number and pressed ENTER key, we get the following error.
    " Conversion error
    Error analysis
        The program has been interrupted and cannot resume.
        Program "SAPLJ1IEX" attempted to display fields on screen 0200.
        An error occurred during the conversion of this data.
    How to correct the error
        There was a conversion error in the output of fields to the screen.
        The formats of the ABAP output field and the screen field may not match.
        Some field types require more space on the screen than in the ABAP
        program. For example, a date output field on the screen requires two
        more characters than the corresponding field in the ABAP program. When
        the date is displayed on the screen, an error occurs resulting in this
        error message.
                      Screen name.............. "SAPLJ1IEX"
                      Screen number............ 0200
                      Screen field............. "J_1IEXITEM-AVB_CREDIT_QTY"
                      Error text............... "FX015: Sign lost."
        Other data:
    Pls help me in correcting this error.

    Hi all,
    Is the DYNPRO_FIELD_CONVERSION error in J1IEX transaction (field conversion error in AVB_CREDIT_QTY field under "Exceise Invoice" tab) due to the negative value passed to this AVB_CREDIT_QTY screen field.
    If so, how to correct the negative value problem?

  • TIME_OUT Error in calling transaction IP10

    Hi all,
    I would like to ask help from you guys, i am currently handling an error when using transaction IP30 (RISTRA20). The program returns an error (Message No. 00341)stating that the "texts from the batch input are not output. Only a placeholder".
    Hope anyone can help me figure this out.
    Note: In Transaction IP30, Transaction IP10 is being called. The error arises at this point.
    Thanks in advance!

    Hi John,
    I dont know what transaction are you talking about...
    But if it is TIME_OUT.... you need to check for any OSS Notes available for this problem.
    If not send a product error message to SAP.
    There cannot be anyother solution,,,, if it is time_out.
    go ahead.

  • What is the table name having the data enterd in the "CJ40" TRANSACTION?

    HAI GUYS,
                   AFTER GETTING INTO THE CJ40 TRANSACTION, I HAVE CLICKED "PRIMARU COST". THIS SCREEN IN HAVING TABLE CONTROL , IN THIS TABLE CONTROL THERE WILL BE FIELD CALLED "TOTAL PLAN COST".
                   IF I ENTER THE AMOUNT IN THE "TOTAL PLAN COST"  FIELD, WHERE THE AMOUNT WILL BE STORED? I MEAN WHICH TABLE WILL HAVE THAT VALUE?
            I HAVE TRIED MANY THINGS . CAN ANYONE TELL ME THE NAME OF THE TABLE.
    REPLY WILL BE AWARDED.
    REGARDS,
    SHAFI.

    Hi,
    The following are the tables used in Project Systems for this scenario;
    IMAK     Appropriation requests - general data
    IMAV     Appropriation request variant
    IMPR     Investment Program Positions
    IMPU     Texts for cap. inv. program positions
    IMTP     Investment programs
    IMZO     Assignment Table- CO Object - Capital Investment Prog.Pos.
    PMCO     Cost structure of maintenance order
    PRHI     Work Breakdown Structure, Edges (Hierarchy Pointer)
    PROJ     Project definition
    PRPS     WBS (Work Breakdown Structure) Element Master Data
    You can refer those.
    Regards,
    Renjith Michael.

  • Repository error:Error -: AIP-50143:Transaction Instance Not fo

    Hi Ramesh,
    The Scenario is as follows:
    1. we are running a stub on WLI server(back end) which enques a message in to the JMS queue.
    2.This JMS queue is used in the B2B internal delivery channel.
    3.The message is coming to the B2B , however we are getting an error with the following message.
    ******ERROR*******
    2008.10.31 at 16:29:35:289: Thread-27: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>null</correlationId>
    <b2bMessageId>AC1F755B11D528EE26C000001BDC0BC0</b2bMessageId>
    <errorCode>AIP-50014</errorCode>
    <errorText>General Error</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (PUNIN1879164419)
    Description: General Error
    StackTrace:
    Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1178)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:134)
    at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:609)
    at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:235)
    Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3214)
    at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:904)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1135)
    ... 3 more
    Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
    at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3211)
    ... 5 more
    Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
    at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
    at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
    at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
    ... 6 more
    ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    </Exception>
    2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) Engine:notifyApp Exit
    2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50014: General Error
    ******ERROR*******
    the screnario is working when we directly put the message on to the queue.
    Please help .
    Thanks & Regards
    Sachin (Infosys Team)

    Please refer Re: AIP-50025:  Repository error ?
    Regards,
    Sinkar
    [From Ramesh Team]

  • Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Inst

    Hi,
    Hi Ramesh,
    The Scenario is as follows:
    1. we are running a stub on WLI server(back end) which enques a message in to the JMS queue.
    2.This JMS queue is used in the B2B internal delivery channel.
    3.The message is coming to the B2B , however we are getting an error with the following message.
    ******ERROR*******
    2008.10.31 at 16:29:35:289: Thread-27: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>null</correlationId>
    <b2bMessageId>AC1F755B11D528EE26C000001BDC0BC0</b2bMessageId>
    <errorCode>AIP-50014</errorCode>
    <errorText>General Error</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (PUNIN1879164419)
    Description: General Error
    StackTrace:
    Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1178)
    at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:134)
    at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:609)
    at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:235)
    Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3214)
    at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:904)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1135)
    ... 3 more
    Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
    at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3211)
    ... 5 more
    Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
    at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
    at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
    at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
    at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
    ... 6 more
    ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    </Exception>
    2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) Engine:notifyApp Exit
    2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50014: General Error
    ******ERROR*******
    the screnario is working when we directly put the message on to the queue.
    Please help .
    Thanks & Regards
    Sachin (Infosys Team)

    Please refer Re: AIP-50025:  Repository error ?
    Regards,
    Sinkar
    [From Ramesh Team]

  • Error in launch transaction

    Hi Experts,
    I am having errors on launch transaction in QAS. The errors I am getting are:
    1) Mapped logical system KDVCLNT100 not defined. For this(I creataed a condition in class for DEV and QAS), Class created is included in zpackage and transported to QAS
    2)Cannot determine logical system.
    3) Launch transaction YBP_ERP_TX_IW51 not defined.
    4) Launch transaction not defined Execution not possible.
    Tranport done was successfull and I have checked the nav bar profile and it is ok.
    Please give suggestion.
    Thanks,
    Shahid

    Hi,
    You need to maintain necessary settings in transaction crms_ic_cross_sys. Maintain the information for OWNLOGSYS, it needs to be maintained in every system as a manual entry.
    Regards
    Prasenjit

  • Error in KEFC transaction

    Hi All,
    I get the following error in KEFC transaction when i try to upload file from application server.
    "The transfer was terminated. However, content errors occurred".
    When i debug the program i found the follwoing error messages
    Field BUDAT no. 2 in record 1 is not filled acc. to type. Content
    Field GJHAR no. 5 in record 1 is not filled acc. to type. Content:
    Field PERDE no. 13 in record 1 is not filled acc. to type. Content:
    Can someone please provide some inputs.
    Thanks and Regards,
    Sachin M M

    Hi,
    some customers has same situation and SAP Note 1139909 could solve this.
    Hope it will solve.
    best regards, Takashi

  • Error in receipt transaction

    Hi, I have the following error in receipt transaction:
    "Cannot read value for profile option PO_RVCTP_ENABLE_TRACE in routine &ROUTINE." I can see the error in "Transaction Statuses" form (INV_SUPERUSER: Transactions: Receiving: Transactions Status Summary)
    Thanks.

    Hi,
    "Cannot read value for profile option PO_RVCTP_ENABLE_TRACE in routine &ROUTINE." What is the value of this profile option at the site/application/user/responsibility levels?
    Regards,
    Hussein

Maybe you are looking for

  • Submit  ALV report in Background & exporting list to memory and return

    Dear all, I created one Z program (ZPROGRAM2).  Here i use SUBMIT ZPRORAM1_ALV exporting list to memory and return. call function 'LIST_FROM_MEMORY'. call function 'TABLE_COMPRESS' . ZPRORAM1_ALV output i send mail. This all are working in foreground

  • Student needs help with database planning

    Preliminary Plan I work at the headquarters of a small company of 8 offices and 26 employees. I am the central database system. Right now, information is only accessible through me, by me, from me, and to me via fax, phone, mail, or email. I have sev

  • Why must a dynamically linked Premiere timeline be open in order to see it in After Effects CC 2014?

    I am having a problem I don't think existed before. I have an After Effects project with two different Premiere timelines in it. I red the dreaded red screen of "media offline" unless I open the timeline in Premiere. Which is odd, because I don't rem

  • Defaulting to connect to unsecured wireless networks

    I noticed that the iPhone's wifi defaults to unsecured networks, even if there are stronger secured networks that are saved in your phone. As an example, by my house I can view optimum wifi in the list, but it is too far away to actually connect to.

  • How do I get my music off my iPod Touch?

    I had a virus and had to delete all the data on my computer. I am now setting iTunes up again and I tried to get my songs off my iPod touch. It transfered only a small portion of my music, only the songs I had purchased in the past few months or so.