Error in CJ88 reversal

Hi All,
I've tried to reverse some WBS/assets settlements in CJ88, but I've received an error:
"Sender: WBS HXG/09110-009-01-01
System error - deletion not possible"
What this stands for? How can I reverse this settlements? Is there another way to do that?
Thanks a lot for help!

Hi,
Thanks for quick replies.
I used CJ88, Message no. AAPO186.
Document is created and I can check it in FB03.

Similar Messages

Settlement G/L account Error in CJ88 Transaction

Hi
i am receiving error in CJ88 transaction when I am trying to settle cost. I have created default settlement rule on WBS by enhancement, The G/L Account is also balancesheet account. Error message-- G/L account is not assigned to controlling area.
Please suggest the soulution. Thanks

Hi,
Can you elaborate the error in detail,
You want settle the WBS to GL right?
The GL which you are setting the same GL is getting error.
You have checked the GL in FS00 or FSP0, If you have not checked in FS00 then check in FSSo whether it is extended to Company code.

Error During CJ88 Msg#F5702

Hi Gurus,
I encountered error during settlement via CJ88, am settling amounts from previous year to current year as full settment.
The error encountered: Balance in transaction currency
Msg No. F5702
Diagnosis:
A balance has occured in transaction currency SGD with the ff details:
Exchange Rate "00", amount 284,000- and currency key SGD
The data in the transaction currency were transferred from the calling application.
System Response:
Your data cannot be processed in FI
Procedure:
The error is probably in the calling application
Thank you very much.
Evelyn

Hi Narayan,
Have checked the currency maintained in Co Area and it is in SGD.
Please advise how to solve the error in CJ88.
Thanks!
Eve

Settlemet Error in CJ88

Hi All,
Thre is a pressing issue that I need to solve.
I am receiving a settlement error (cj88) for project
*Settlmnt from revenues/debit-side down paymnts to receiver CTR 22893 not
allowed*
Message no. KD561
Diagnosis
The sender has revenues or customer down payments with cost element
4540999 (business transaction-- CO Through-postings from FI).
You cannot settle these revenues or customer down payments to receiver
CTR 22893.
Procedure
Change the settlement rule for the sender. It can be useful, for
example, to use a source structure to settle costs and revenues
separately to different receivers.
Note
Revenues or customer down payments can only be settled to G/L accounts,
profitability segments, sales documents, real estate objects, orders
with revenues, or WBS elements.
It appeared an amount was posted to G/L 4540999 when it shouldnt have
been and we had this corrected by reversing it. 4540999is a revenue element with catagory 11
However the error is still appearing. It appears that even though there
are two offsetting transactions settlement will still try to do each one
hence it is still giving the error. I have not been able to find a work
around to this.
Please throw some lights in how to proceed from this
Pratiksha

Hi,
You may try to switch off the message.
Hi,
OBMSG (nothing but table T100S) and add the entries in OBA5 (view V_T100C).
Please go to OBMSG
ignore the cross client warning message.
Find out the application area KD
Select that and click on messages
If 561 message number is not there, then enter the same and Allowed is you please put WE and Standard W, then Tick switch off message.
Then please go OBA5
Enter work area KD
Enter message No.561
Online select - (switch off the message)
Standard - (switch off the message)
Regards,
Ravi

Error while uploading Reversing Journal using Webadi

Hi,
When uploading a reversing journal the following message is returned.... "Reversal Period must be supplied when Reverse Journal is set to Yes"
This is despite the Reversal period(P2-13) is in Open status.
Category          * List - Text     Standard reversing
Source          * List - Text     Spreadsheet
Currency          * List - Text     GBP
Period          List - Text     P1-13
Accounting Date     * List - Date     1/29/2013
Batch Name          Text     SS-CZN-7828012-070213-17:03
Journal Name          Text     SS-CZN-7828012-070213-17:03
Reverse Journal          List - Text     Yes
Reversal Period/Date     List - Text     P2-13
Any help?

Please see if these bugs help.
Bug 8236555 : REVERSAL PERIOD MUST BE SUPPLIED - ERROR UPLOAD MULT JOURNAL WITH BLANK LINE
Bug 11773472 : WEBADI ERROR: REVERSAL PERIOD MUST BE SUPPLIED WHEN REVERSE JOURNAL IS SET TO YE
Bug 14783874 : UNABLE TO LOAD GLADI JOURNAL WITH REVERSAL PERIOD IF REGIONAL SETTINGS ARE NOT S
If you still get the same error, please log a SR.
Thanks,
Hussein

System Lock Error while reset & reversing the cleared document - FBRA

Hi Experts,
Currently using t-code FBRA, when user trying to reset & reverse the cleared document , they are facing "System Lock Error". We have analyzed on this issue and found SAP note no. u201C487347 u2013FBRA: Overflow of the lock table in production systemu201D . After implementation of this note, SAP has created one new transaction code, FBRA_LOAC.
However, when we tried to reset & reverse the cleared document using t-code FBRA_LOAC, we face the same error.
Can you help me to resolve this issue ?
Thanks in advance.
Regards,
Manish

Hi:
We once faced these issue and got it resolved by extending parameter after extending the profile-parameter "enque/table_size", as per note note 13907. Do not forget the restart the server after extension.
Regards

BizTalk published WCF service throwing HTTP 404 error using ISA reverse proxy settings

I have published my schemas as a WCF service from BizTalk 2010 "Publish WCF Service" wizard. I used Wcf-basicHTTP adapter in receive port. I am able to run the service successfully on localhost IIS and I tested my biztalk solution by sending request using SOAP UI and got response successfully.... Now: Actually, I need to give this service endpoint to my vendor who will send request from outside my company's network i.e. internet. In my infrastrucrue BizTalk is behind the firewall so, we setup a REVERSE proxy server at DMZ layer and it is configured properly. I have tested a simple WCF service by replacing the localhost with Proxy server configured address <DNSName> and it worked absolutely fine. But when I change localhost in my BizTalk schema based published WCF service it is not working and I am getting following error. Really strugling to get it resolved. I wasted a whole 3 days....very upset. Please help me out by giving the detailed step solution. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /BizTalkServiceInstance/MyService.svc I am surprized why other c# code based WCF services are working fine with reverse proxy settings. Server Error in '/' Application. The resource cannot be found.Is there any special things to consider Biztalk exposed wcf servcie over ssl in IIS cluster with ISA

Hi Singam :)
First I would start by browsing any other files (files other than the one from WCF) just to ensure that the reverse-proxy’s redirection rules are set correctly. If you get the same 404 error when you try to access other service/files “through reverse-proxy”,
then it’s an issue in the redirection rule(s) in reverse-proxy.
If others are fine i.e. no issue in reverse-proxy setup as such, then try the following for WCF service's web.config file. I have seen this issue in WCF service (not just BizTalk’s artifacts exposed as service in reverse-proxy). Add serviceHostingEnvironment
config as show with in serviceModel section.
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Error During Confirmation Reversal of production Order

Dear experts
In production client during confirmation reversal for ,we are getting below error message
Enter only true account assignment.
Regards
sandeep Patil

Hi Sandeep,
If it's just a warning, press the enter key and it should post.
or then you will have to debug the reversal process to locate from where the error message gets triggered..
Regards,
R.Brahmankar

Error in MIRO Reversal - MR8M

Hi Experts,
User is getting the error while reversing the MIRO entry using T-code - MR8M
"Company Code / Cost Center number CTR belongs to business area BA1 not BA2".
I checked in ME23N and MIR4. In both the T-codes correct Business Area is used i.e. the BA2.
Please help where else I could look for the assignment of business area.
Thanks

Hi:
Please check out which business area has been maintained in your cost center master data in KS03 as being used in your transaction. It is quite possible that before reversal the cost center assignment has been changed between invocie posting date and its reversal date.
Regards

Getting Error while doing Reverse Engineering Processes.

Hi all,
I am new to ODI, i tried ODI with SAP ABAP, after i my all settings after doing reverse Engineer Processes, I cant able to see the Metadata browser while checking Log i am getting the below given error.
ODI-1217: Session Sap ERP Source (27001) fails with return code 7000.
ODI-1226: Step Sap ERP Source fails after 1 attempt(s).
ODI-1229: An error occurred while performing a Reverse operation on model code SAP_ERP_SOURCE.
Caused By: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``//////////////////////////////////////////////////////////////////////////////// . . . '' : Class: DestinationDataProvider not found in namespace : at Line: 275 : in file: inline evaluation of: ``//////////////////////////////////////////////////////////////////////////////// . . . '' : DestinationDataProvider
BSF info: Create Java Classes at line: 0 column: columnNo
Pl. help me to come out from this error.
bdharanr

Hi,
Thanks for the reply.
I am trying to reverse SAP tables. Initially the Reversal process stuck at Set MetaData step. I stopped the session and restarted it then Set MetaData completed successfully but Set FlexFields give the error.
Any idea?
Regards,
Arsalan.

Error in CJ88 Posting transaction is not possible (value date not allowed)

When i try CJ88 with a wbs element, it shows the following error :
Posting transaction is not possible (value date not allowed)
Message no. AA 478
Diagnosis
A retirement was already posted on the asset 000022400733 0041 on 20091231. Based on the value date 20091231 of the transaction, this transaction should have been included in the calculation of values for the retirement.
System Response
The transaction is rejected.
Procedure
Check the value date of the transaction.
In need to put year 2009 in date of the transaction, but it isnt posible. ¿Why? I dont know very much about asset accounting...

Hi
It is not allowing for WBS element final settlement, because of your asset already retairement was done.
By best suggetion is, You will create the new WBS element and transfer the all cost line items from old WBS element to new WBS element, then you will try to settlement for another asset in CJ88.
I hope it will use for you.
Regards
PVCPVC

Urgent--Error in MIRO reversal

Hi
While doing MIRO reversal system giving me error as "Error in account determination for VSE CAIN"
CAIN is my chart of accounts an VSE is transaction key for higher education cess.
I checked in VSE ,G/L is there.
Then I made Dr and Cr for same G/L in VSE.
Then system giving me error as "Balance is not zero."
What will be the reason?
How to solve this problem?
Its urgent pl?
Points sure for any help.

Enter the balance amount in the amount filed then you will not see this error.

Error in Settlement: "Reversal of settlements on Internal Order's"

Hi All,
Please help me with the below issue which is as follows:
"In October I did two settlements in error on internal
Orders A & B. This refers to assets X &
Y in co code XX".
"I need to reverse these settlements in November, I assume
I use KO88, but am concerned amount the FI posting".
I want to know what sort of analysis is to be done and precuation to be taken before reversing the settlements. Please help me this..
Thanks a ton in advance.
Regards,
Vinay

hi swatha.
for settlement of internal orders/PM orders KO88/KO8G is run but before execution you shoud see the following step as period end activity:
1.. calculate activity price (KSII)
2. Revaluation of actual price KON1/KON2
kkumar

Settlement rule error in cj88

Dear All
Please guide me i had Struck ed in this error
When i am doing the settlement for activity against the network
this following error is occurs
Define a settlement cost element for receiver type WBS
Message no. KD506
regards
Raj

Hi
Goto SPRO-PSCosts--Automatic and periodic allocations --- Settlement -Settlement profile-allocation structure.
In this screen select allocation structure A1and click on the assignments folder. Now select the line item and click on the source folder
Alloc.structure A1    Generic Settlement Structure
Assignment      10    Generic Settlement Structure
CO Area         BP10
Cost Elem.Group     ALL
Then select settlkement cost elements folder
Here you define the Receiver Cat as CTR and Settlement cost element ( Ask your FI consultant).
kindly do the above mentioned steps and Run the CJ88
Thanks
S.Murali

F.05 Error 806 on Reverse Postings in SAPF100

Hello,
When I run F.05 (in test environment) current period postings complete ok, but I get Error 806 on my reverse postings. Has anyone seen this error and know what causes it? I have verified that the next posting period is open and that reverse postings should be done as they are on open items. I did not check the field "Bal. Sheet preparation valuation" as is recommended. The F.05 program was run on both open items and GL Balances.
Thank you,
Kathleen

Apologies for the long delay in closing out this question, but we resolved it - simple issue of not having the CO peirod open in QAS for the following period, which was not allowing the reverse postings. We only had originally had the FI period opened, not both, but once we did, the program worked perfectly as designed. Thanks all!

Error in CJ88 reversal

Similar Messages

Maybe you are looking for