Error in CJ88
Dear All,
In my client side, In periodic processing activity CJ88, getting error that "Sender: WBS OP.SACE.05003114 REFRACTORY MATERIAL" and "Acquisition value negative in area 01". Because of this error we are unable to run for this particular WBS element. Will anybody explain clearly and give me solution for this. I will assign points.
Regards,
Prasad
In your case I guess, the settlement is happening to an Asset.
The error due to definition of depreciation area '01' for relevant Chart of depreciation. You have choice of configuration for all types of values i.e., Acquisition value, Net book value, Ord.depreciation,etc. The Options are:
1) * All values allowed
2) + Only positive or zero allowed
3) - Only negative or zero allowed
4) 0 No values allowed.
To solve your probelm do either of below:
Change the configuration to say * All values allowed
else
In asset master depreciation areas screen, for area 01 check "negative values allowed' indicator.
Regards
Sreenivas
Similar Messages
-
Settlement G/L account Error in CJ88 Transaction
Hi
i am receiving error in CJ88 transaction when I am trying to settle cost. I have created default settlement rule on WBS by enhancement, The G/L Account is also balancesheet account. Error message-- G/L account is not assigned to controlling area.
Please suggest the soulution. ThanksHi,
Can you elaborate the error in detail,
You want settle the WBS to GL right?
The GL which you are setting the same GL is getting error.
You have checked the GL in FS00 or FSP0, If you have not checked in FS00 then check in FSSo whether it is extended to Company code. -
Error During CJ88 Msg#F5702
Hi Gurus,
I encountered error during settlement via CJ88, am settling amounts from previous year to current year as full settment.
The error encountered: Balance in transaction currency
Msg No. F5702
Diagnosis:
A balance has occured in transaction currency SGD with the ff details:
Exchange Rate "00", amount 284,000- and currency key SGD
The data in the transaction currency were transferred from the calling application.
System Response:
Your data cannot be processed in FI
Procedure:
The error is probably in the calling application
Thank you very much.
EvelynHi Narayan,
Have checked the currency maintained in Co Area and it is in SGD.
Please advise how to solve the error in CJ88.
Thanks!
Eve -
Error in CJ88 Posting transaction is not possible (value date not allowed)
When i try CJ88 with a wbs element, it shows the following error :
Posting transaction is not possible (value date not allowed)
Message no. AA 478
Diagnosis
A retirement was already posted on the asset 000022400733 0041 on 20091231. Based on the value date 20091231 of the transaction, this transaction should have been included in the calculation of values for the retirement.
System Response
The transaction is rejected.
Procedure
Check the value date of the transaction.
In need to put year 2009 in date of the transaction, but it isnt posible. ¿Why? I dont know very much about asset accounting...Hi
It is not allowing for WBS element final settlement, because of your asset already retairement was done.
By best suggetion is, You will create the new WBS element and transfer the all cost line items from old WBS element to new WBS element, then you will try to settlement for another asset in CJ88.
I hope it will use for you.
Regards
PVCPVC -
Hi All,
Thre is a pressing issue that I need to solve.
I am receiving a settlement error (cj88) for project
*Settlmnt from revenues/debit-side down paymnts to receiver CTR 22893 not
allowed*
Message no. KD561
Diagnosis
The sender has revenues or customer down payments with cost element
4540999 (business transaction-- CO Through-postings from FI).
You cannot settle these revenues or customer down payments to receiver
CTR 22893.
Procedure
Change the settlement rule for the sender. It can be useful, for
example, to use a source structure to settle costs and revenues
separately to different receivers.
Note
Revenues or customer down payments can only be settled to G/L accounts,
profitability segments, sales documents, real estate objects, orders
with revenues, or WBS elements.
It appeared an amount was posted to G/L 4540999 when it shouldnt have
been and we had this corrected by reversing it. 4540999is a revenue element with catagory 11
However the error is still appearing. It appears that even though there
are two offsetting transactions settlement will still try to do each one
hence it is still giving the error. I have not been able to find a work
around to this.
Please throw some lights in how to proceed from this
PratikshaHi,
You may try to switch off the message.
Hi,
OBMSG (nothing but table T100S) and add the entries in OBA5 (view V_T100C).
Please go to OBMSG
ignore the cross client warning message.
Find out the application area KD
Select that and click on messages
If 561 message number is not there, then enter the same and Allowed is you please put WE and Standard W, then Tick switch off message.
Then please go OBA5
Enter work area KD
Enter message No.561
Online select - (switch off the message)
Standard - (switch off the message)
Regards,
Ravi -
Dear All
Please guide me i had Struck ed in this error
When i am doing the settlement for activity against the network
this following error is occurs
Define a settlement cost element for receiver type WBS
Message no. KD506
regards
RajHi
Goto SPRO-PSCosts--Automatic and periodic allocations --- Settlement -Settlement profile-allocation structure.
In this screen select allocation structure A1and click on the assignments folder. Now select the line item and click on the source folder
Alloc.structure A1 Generic Settlement Structure
Assignment 10 Generic Settlement Structure
CO Area BP10
Cost Elem.Group ALL
Then select settlkement cost elements folder
Here you define the Receiver Cat as CTR and Settlement cost element ( Ask your FI consultant).
kindly do the above mentioned steps and Run the CJ88
Thanks
S.Murali -
Hi All,
I've tried to reverse some WBS/assets settlements in CJ88, but I've received an error:
"Sender: WBS HXG/09110-009-01-01
System error - deletion not possible"
What this stands for? How can I reverse this settlements? Is there another way to do that?
Thanks a lot for help!Hi,
Thanks for quick replies.
I used CJ88, Message no. AAPO186.
Document is created and I can check it in FB03. -
Dear Friend's
When i am doing a perodic settlement of project then system shows error message "Budget Exceeded."
But actually sufficient budget is available against that wbs element.
Why this error is showing at the time of settlement.
Pls guide me on this issue.
Thanks in Advance.
Regards
Sandeep N.TheurkarHi,
Can u please clarify some question
1. to what account assignment you are settling the cost and fom where u r bringing the cost whether it is production order or maintenance order etc..
2.In cji3 report are u getting any negative value
Kindly confirm so that i can provide u the soln
Abraham -
Settlement amount Available amount error in CJ88
Hi All
We have a WBS element where we have posted expenses over a period of time. Periodically amounts were passed to AUC. Now we are are trying to capitalizae the fixed asset. Settlement amount is the same amount what we see in AUC. But still we are getting error message that Settlement amount > Available amount. Not what what could be the issue.
We noticed that there is last expense posting, if we reduce this amount in settlement rules then system allows to settle. This amount being shown in AUC (Asset values) not being considered in settlement.
Waiting fro replies.
Regards
NeerajHi Raman
Below is the screenshot.
Regards
Neeraj -
Error Max no of items in FI reached during CJ88
Hi All, We are getting a similar error as above in cj88 error no F5727. The number of Fixed Assets defined in Level 1 WBS is 964. This is less than 999 so dont understand why this issue is coming. I find two other discussions in this forum: First we can use another secondary WBS to post all the cost which is not possible here as we define all fixed assets only in level 1 wbs Second we found the note 36353 is this going to help? Third we can settle cost to one single WBS only rather than all these and then transfer cost or distribute to all FXA through Asset posting. But this is also not possible as how to change the settlement rule now. All these line items are already used in previous period 12/2014 and there are no unsettled balances of previous period. Then how to remove this error? Can anybody suggest.
Hi,
Read this thread
You are not yet reached to 999 levels still it is giving an error message, strange. Can you check the settlemen rules at table level does it have more than what you see on the settlement screen. if that is the case then you delete unwanted netries from table COBRB and COBRA by using SM30.
Message no. F5727:maximum number of items reached in FI sereen MI07.
Maximum number of items in FI reached - CJ88
follow the work around suggested by Virendra. Hope that will solve your issue. if not raise OSS to SAP.
Thanks,
Sudhakar -
Error while settling costs to AUC (T.CODE CJ88)
The following error is encountered while settling costs to AUC using
t.code CJ88 with WBS element,
with parameters
with orders
Selection processing type 3 (partial settlement),
period 4,
FY 2008,
selection - with hierarchy, with orders.
Error message is:-
Typ Message text
LTxt
Sender: WBS ASCP.DSCA.CP.NS.DS.003 PLANNO MILLING 4MX2M
Acquisition value negative in area 01.Hi,
Use T.Code: as02 and click on Depreciation areas, then double click on Depreciation area(example :01 - book dep), there u can select the field allow negative postings allowed. Once this process is completed, remove that indicator.
If u couldn't found that field, then goto screen layout for depreciation area and change status from suprress to optional.
Hope it can resolve ur problem
regards
Prasad -
Budget Exceed error while settlement in PS T-Code CJ88
Hi Guru's,
I have created structure upto 6 level and i have done planning and budgeting at 6th level only, and actual cost is also posted at 6th level.
When i am setteling that amount at 5th level WBS using T-Code CJ88 then it is giving Budget exceed error of that particular amount as budget is also available at higher level WBS as accumalation of budget at 6th level is going to higher level WBS as i am following buttom-up approach.
Please suggest.
Regards,
AmbujHi Rajesh,
When you distribute budget to lower level WBS, the budget is only available at the lower level (availability is checked as: Budget - Distributed Budget - Assigned) regardless of whether it is shown at the superior level or not.
AVAC status is activated automatically on WBS where budget is distirbuted and released (provide you have maintained Activation Type 1 in Budget Profile OPS9). Please check if AVAC status is active on your 5th level WBS. If it is active then the system will throw the error as SAP standard behavior. You can remove this status from 5th level WBS via CJBW.
You may need to look at your budget configuration accordingly.
Regards,
Ammar -
Hello All,
Good Day!
I have encountered error while running CJ88 WBS settlement, according to it:
"Data Inconsistency: Parallel depr. area is not posted"
Message no. AAPQ104
What is the possible cause of this?
Please advice.
Thanks in advance!
JheroHi,
Please check the below OSS notes:-
Note 97388 - Asset transfer: Problems with parallel areas
Note 124231 - AAPO104 w/o reason in intercompany asset transfer
Note 210557 - Mass retiremt w/ revenue in case of parallel crcies
Also check whether there is any deletion of additional dep area recently after the asset creation. If yes, you need to add it again & populate additional Dep in Asset created during trial run by T code AFBN than rerun the settlement issue will be resolved.
Regards,
Gaurav -
Dear All
The WBS DGP-0001-FS-PM-01-M unable to settled for AUC 4000029 through CJ88. Where as these wbs DGP-0001-CW-PM-01-M,DGP-0001-CW-L,-01-S,DGP-0001-EX-CS-01-M,DGP-0001-EX-CS-01-S has been settled to AUC which are same nature with DGP-0001-FS-PM-01-M.
The systmen error is
Complete allocation structure GI
Message no. KD503
Diagnosis
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
Cost element 80011 cannot be assigned to a settlement cost assignment in allocation structure GI, and therefore it cannot be assigned to a settlement cost element.
Procedure
Possible solutions are as follows:
u2022 If the posting under cost element 80011 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
u2022 If the posting was made correctly, you can do the following:
a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
o You can update allocation structure GI
The Cost Element 80011 (Balance sheet GL & Cat :90 Statistical Cost element for BS), which is not applicable for allocation structure.
Please advice for the same.
Regards
AvijitAvijit,
You have to include the cost element 80011, in the cost element group. Use transaction KAH2, for knowing the cost element gruoup go to IMG-PS-Costs-Automatic and periodic allocation - Settlement - Settlement Profile - Create allocation structure.
Here select the allocation structure GI, double click on Assignments, select the appropriate assignment line item then double click on Source. Here check the cost element group, copy it enter the same in KAH2 then add the cost element 80011 Save.
Now come out of settlement and retry the settlement.
I suggest you to talk your FICO consultant for resolving this issue.
Praveen -
Dear All,
while i am trying to settle the AUC with WBS, i am getting below error message.
Debit to source assignment REV cannot be settled
Message no. KD569
Diagnosis
There are costs for a cost element on the integrated asset under construction (AuC), which were assigned to the source assignment REV in the source structure (-> Sender settlement rule -> Parameters).
This source structure does not have a distribution rule with settlement type FUL. Alternatively the total of the percentage rates is < 100%.
Note:
During FUL settlement (full settlement) of an investment measure, all costs incurred up to the settlement period on the AuC, and not yet settled to the finished asset or to another CO receiver, are settled. During a partial capitalization of the investment measure (settlement with processing type 3, if the measure has not yet got the "Technically complete status"), you can capitalize individual costs from the AuC on the finished asset. Alternatively, you can settle them to another CO receiver.
Procedure
Maintain the distribution rules for source structure REV and settlement type FUL, or use partial capitalization.
If required, change the error message category in Customizing, under General Controlling -> Change message control
Please suggest me where can i maintain the distribution rules for source structure REV and settlement type FUL, Any path or T-Code.
Regards,
Shekar.Hi,
Allocation Structrure & other setting are all fine, it showing below error message & procedure to resolve.
Error Message
Debit to source assignment REV cannot be settled
Message no. KD569
Procedure
Maintain the distribution rules for source structure REV and settlement type FUL, or use partial capitalization.
If required, change the error message category in Customizing, under General Controlling -> Change message control
Please suggest where i have to maintain the distribution rules for source structre REV and settlment type FUL.
Maybe you are looking for
-
i´ve just got the now ios version 7.0 installed and now i can´t agree on the terms and conditions to access icloud on my iphone cus it keeps saying that i have no server (wich i have) now that i´ve ios 7.0. What do i have to do? The thing is that i´v
-
Where is the underscore for ipad mini to field email
I cannot find the underscore to send a email in the to field, so I can you underscore a name to send the e mail. How do find or underscore? I have a ipad mini
-
Cl_rsplfa_plan_buffer - How to write data back to buffer
Hi, Our requirement is to read a mapping DSO value in FOX to calculate revenue. We used function module call from FOX. I'm using l_r_plan_buffer->get_data to get data from plan buffer. It reads the buffer data and I could manipulate it. But I d
-
Google Analytics url additions persisting in redirects - causing issues
Hello, We're having a bit of an issue regarding Google Analytics url parameters being passed through redirects to third party sites, this is causing some of them not to resolve correctly. When we send email newsletters through Eloqua the links in the
-
Problem with Container.getListeners(Class T )
After coding for a while in CodeGuide, I switch to eclipse and converted my java 1.5 enums into a form compatible with java 1.4. Now in unrelated files (that I have not touched) I am getting: The return type is incompatible with Container.getListener