Error in Client Copy - Urgent

Hi all,
A client copy was done from PRD to QAS.
It has been found out that the Field name in the QAS and PRD doesnot match in SE16.
In the table BSEC, the field STRAS was present in QAS where as it is displayed as STRAR in PRD. This is in SE16. In SE11, it is STRAS in both QAS and PRD.
Could anyone tell why this might have happened?
Thanks in advance.
Regards,
Adapala.

Hi,
SE16 is just a display of SE11 table. So there will not be any change. When you take the table in SE16. From Settings->User Parameters->try toggling b/w field name and field label.
I think STRAS is the Street Address...
If there is any type mismatch the client copy will not happen...
Regards,

Similar Messages

Error during client copy in GRC 10.0 -Application exit

Hello Experts,
After installing GRC 10.0,as post installation activity ,
we are doing client copy (accordence with the sap note 1505255).
but we are getting 'Application Exit Error' when executing method FDT_BEFORE_EXPORT_C:
any help would be appreciated.
regards,
vinay singh

HI
Can you attach client copy log for analysis.
Regards
Rajan Arora

Error while Client Copy

Hello,
We are receiving continuous dumps while performing post-processing activities of remote client-copy.
Error details:
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
The termination occurred in the ABAP program "SAPFSSO6" in "SOFD_INSARR".
The main program was "RSSOUSCO_FOR_CC ".

Hello,
If your platform is Windows so please add /3GB & /PAE parameter in boot.ini file.
Thanks & Regards,
Charanjit Singh.

Error in Client Copy--Work process restarted

when i am doing a Client copy of the SAP_CUST profile
i am getting the following error.
<b>"work process restarted"</b>
Pls help

Hi,
Run it again, but run in background.
Thanks, then keep looking at scc3.
thanks,

Error in client copy - EFG_FORM_CC_EXIT_AFTER

Hi,
I am getting the following error while doing client copy,
it has copied all the tables , but at the end it gives message,
===============================================
Target Client           500
Source Client           000
Copy Type               Local Copy
Profile                 SAP_CUST
Status                  Successfully Completed
User                    SAP*
Start on                26.09.2007 / 01:48:17
Last Entry on           26.09.2007 / 02:56:00
Statistics for this Run
- No. of Tables             53644 of     53644
- Deleted Lines                 2
- Copied Lines            5090006
arnings and Errors
Table Name              Component Package
EFG_FORM_CC_EXIT_AFTER CA-GTF-PWB Program Exit has Syntax Errors
EFG_FORM_CC_EXIT_BEFORE CA-GTF-PWB Program Exit has Syntax Errors
============================================================
please advice.
regards,
SM

Hi Shark,
Your client copy seems to be ended with just warnings. As mentioned, please correct those 2 forms in the source system and try to import to target client. Discuss with apps member whether they need these 2 mentioned forms. If they don`t need it ,you can ignore the warnings.
Perform post processing after client copy.
regards,
Vinodh.

Data Load Error after Client copy on Source System

We did a client copy to our QAS source system. After that was complete, I tried to do a couple of full data loads. But they fail. The only errors I see are on the source system when I try to manual update the Idocs. They are:
EDI: Partner Profile not available
Entry in inbound table not found
Is there a step I need to take after the client copy and before the loads? I have a feeling that I'm forgeting something.
Thanks,
Chris

Hi Chris,
Check the following.
1> Go to WE20 check whether you are able to see two logical system in "Partner Type LS" one for Source and one for Myself.
2> If you say Yes for <1> then check in both the logical system, in the classification tab, partner status should be 'active'.
3> Check you have used REMOTE USER in main and in Outbound and inbound Parameters "Post Processing Permitted tab " for each Message type.
4> go to out bound message type and check the "Receiver port" pointing to correct RFC destination for both ( Source and Myself logical system).
If your answer is no for <1> then perform all the steps.
Hope this will help you.
Suneel

AFAB: Runtime Error after client copy.

Hi all,
I'm having a problem with the transaction code AFAB (post client copy). After client copy from PRD to DEV, I'm encountering this runtime error "SAPSQL_ARRAY_INSERT_DUPREC - The ABAP/4 Open SQL array insert results in duplicate database records." whenever I tried to perform AFAB. Test run was executed successfully but I cannot complete the actual background processing.
I have try with other asset (in the same client) and encounter the same problem. Likewise, I have successfully completed the depre. if I try the same and other asset (in a different client on the same server).
I've check the number range in FBN1 and have verified that the range is correct.
Any advice as to how I can solve this problem?
Thank you.
Regards.
p/s: if there is duplication, how do I find where the duplication is located and how do I remove this duplication?
p/s 2: the standard SQL that is having this problem is "INSERT COBK FROM TABLE COBK_INS."
Edited by: Sek Yao Ooi on Aug 5, 2010 5:21 AM

Solution obtain from snote-83731 ; thanks to SAP-Marketplace's support.
Issue solved.

Error After client copy

Hi all,
I did a client copy in ECC IDES with client 800 as source client.As per the logs , copy is successful.The profile usedf is SAP_ALL.After the copy we logged into the new client which was
created and it looked good. Checked the Logs in SCC3 and it said that client copy was finished sucessfully.However now when we go and execute transactions MM01 and VA01, it is giving a error saying
Batch definition level not found.System inconsistency!
Not sure what went wrong, Any suggestions would be Helpful.
Regards,
Chaitanya.

hi...
send the full details of ur client copy....
what is ur target client where u did this client copy .. i mean in prod dev

/1CN/CRMSAP_PART ddic error while client copy

Hell Gurus
I am doing local client copy.
My source client is 000 and target is 210.
But in between it is giving ddic error for table /1CN/CRMSAP_PART
But copy is still going on.
Please suggest what went wrong.
Regards
Yogesh

Hi,
most likely, everything went fine ))
If you do have problems in special tables, client copy mentions this and reports it as in your case ...
=> This table did not get copied !
First questions: Do you have rows in this table ? If not, you are fine ?
Second: Do a DDIC check in SE11 and you most likely will find the root cause ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Application Exit Error during client copy

Hi ,
I have an ECC 6 system with DB2 database.I get an application Exit error while doing a client copy from 000 to 901.I could see all the tables where copied but the error comes in post processing stage.
Application exit error
function module :FIN_TR_CC_EXIT
package :FINB_TRANSPORT_TOOL
Program ended abnormally
I tried to delete the client and recreate it again.But still it gave the same error.I tried deleting the client gain.But the deletion job cancels .
Plz help me

HI
Can you attach client copy log for analysis.
Regards
Rajan Arora

Logical system name to be updated while client copy--URGENT HELP REQUIRED

Hello All,
I have a query regarding the "Logical System name" updation during Client copy.
When we make a client copy(SRM Masters) for the Production system(SRM),the Old Logical system name for backend(which is attached to the SRM masters) gets copied to the new Client (Copy) which needs to be updated.
There is a std transaction BDLS through whcih w e can change the current Logical system name to a new one but this seems to work fine for System copy but not for Client copy.
So when i make a client copy of SRM masters for Production system,is there any other std way wherein i can change the "Logical system name " for the backend or do i have to write a CUSTOM program wherein entries for the Backend Logical system name in tables like CRMMLSGUID will be updated with the new Logical system name?
Any help on this is appreciated.
Thanks & Regards,
Disha.

Disha,
Yes, I did it twice and it worked fine.
The R/3 GUID is sent by the OLTP system (R/3) in R/3 message header.
SRM checks this GUID in CRMMLSGUID table.
If is not the same one, then replication process fails.
The only solution I found was to delete this entry. It is automatically recreated with the new GUID with the next replication, with FM CRMT_OLTP_LOGSYS1, called in BAPI_CRM_SAVE.
Look at OSS note 588701 & 765018 for deletion of CRMMLSGUID.
The issue is exactly ours: around system/client copy.
In an CRM environment, this is more critical, because we make a huge use of the middleware. But in our case, and especially after system/client copies, we can go, even if SAP does not guaranty anything, because we don't care about "old" replicated data (I don't care about old BDOCs, that should even be deleted after processing).
We have to take some risks sometimes...
Rgds
Christophe

Error in Client copy

Hi Team,
We got a problem during client import because of the transaction log being full.We observe that the transaction log space in initially at 95 % free but when we start the import job its keep on growing drastically and reaching its maximum available size before the import completes.
Is there any way to switch off the transaction log temporarily during the import job ? we are running on SQL 2005 , ECC 6.0.
I got following command from some forum ( sp_dboption QAS, 'trunc. log on chkpt', false )
(sp_dboption QAS, 'trunc. log on chkpt', true* )*
which says these SQL queries would switch off the changes recording on to transaction log. i dont know whether this would work on SQL 2005. Please let me know the way to fulfill my requirement.
Any quick replies would much appriciated. Please help me to fix this issue.
Thanks & Regards,
Vinod

Hi Topquark,
Thanks for the information.
what you said was true..simple recovery model did not help us to switch off the logging in SQL server 2005. We do not have any past experince as we are performing the client copy activity first for our client. We have around 17.5 GB free space available at file system for transaction log directory.
we have autogrowth enabled and set to 50MB. Production client export job was sucessfull( it is aroung 5.4 GB export copy) when we start the import job intially it is 98 % free however it was running fine for some after that it started increasing and occupying all free space before import job completes.Hence job fails due to insufficient free space.
In normal circumstances log file growth was normal. I have exported the histroy of log space couldn't find much info.
We have tried following options to fix this issue but all are went with no sucess.
1) tried with changing database recovery mdel to 'Simple'
2) Shrink the transaction log file and provided 17.5 GB free space.
3) Created addditional transactional log in other disk drive.
Please let us know what do more on this?
Thanks & Regards,
Vinod

WBSE Layout Detail Screens - Error while Client Copy

Hi
I have 4 Project Profiles like P1,P2,P3,P4.
I customized the WBSE Layout Details with 05 TABs for P1.
I included them in a TR & tried to make a client copy.
End result in the Target client is 09 TABS for P4 profile (actual intention is 05 TABS for P1 Profile as mentioned above)
This is very strange & I am not able to trace from where system picked up ...
1. Entirely different Project Profile
2. How 9 TABs have come instead of 5 TABs
Still,
Source Client shows entries for 5 TABs for P1 Profile
Target Client shows entries for 9 TABs for P4 Profile.
regards

Hi Rafi,
TR is created following the automatic TR prompt while configuring only (similar to other standard configs).
I didnot know the point that "TR created from IMG for WBSE Detail Screens will not work".
But I made out the differences in "TCSCR" table entries (got this table from TR details) in the Source & Target clients.
There is a key number field "0002" which is the reason for mismatch in table "TCSCR" in both the clients.
I searched the help but did not get any value add.
What can be the solution now?
regards

Reg - Client Copy - Urgent

Hi Gurus,
The developer need to test program in latest PRD DB they ask client copy the PRD System.
Only the copy the DB means which category to Select copy the system or i copy the SAP_ALL.
Pls advise. Now DEV DB is now 70%.
Or
if there any possible to Overide the Database. Already we have Client 200 can i copy the latest one in Client 200. Pls advise...
Thanks
Rajesh.
Edited by: R Rajesh on Feb 28, 2008 11:57 AM

Hi,
If your requirement is to copy only the DB structure then you DB copy,
If you want the data also to be copied then use SAP_ALL mentionening the desired tables.
Regards
Reward Points if useful

Error while Client copy request - Report Painter

Hi friends,
I am copying a Workbench request from customization client to test client through SCC1. This relates to Report painter report transport for FDI1. However, I am getting the following warning message while transport -
"Program ended with error or warning, return code: 4"
As per my understanding, the above message is a warning message. However, I would like to check if any of you have come across this message? Is this a normal warning message without any negetive system impact?
Request your guidance for the same.
Thanks in advance
Hrishi

Hi Suma,
Thanks a lot for the response.
Yes it is a Workbench request. And I am adding the new report to the SAP Standard report menu under Line Item Analysis.
Also, some COPA tables are getting updated in the background. Is this normal? Are the standard report painter tables related to COPA tables in any manner?
Thanks in advance.
Hrishi

Error in Client Copy - Urgent

Similar Messages

Maybe you are looking for