Error in Client copy
Hi Team,
We got a problem during client import because of the transaction log being full.We observe that the transaction log space in initially at 95 % free but when we start the import job its keep on growing drastically and reaching its maximum available size before the import completes.
Is there any way to switch off the transaction log temporarily during the import job ? we are running on SQL 2005 , ECC 6.0.
I got following command from some forum ( sp_dboption QAS, 'trunc. log on chkpt', false )
(sp_dboption QAS, 'trunc. log on chkpt', true* )*
which says these SQL queries would switch off the changes recording on to transaction log. i dont know whether this would work on SQL 2005. Please let me know the way to fulfill my requirement.
Any quick replies would much appriciated. Please help me to fix this issue.
Thanks & Regards,
Vinod
Hi Topquark,
Thanks for the information.
what you said was true..simple recovery model did not help us to switch off the logging in SQL server 2005. We do not have any past experince as we are performing the client copy activity first for our client. We have around 17.5 GB free space available at file system for transaction log directory.
we have autogrowth enabled and set to 50MB. Production client export job was sucessfull( it is aroung 5.4 GB export copy) when we start the import job intially it is 98 % free however it was running fine for some after that it started increasing and occupying all free space before import job completes.Hence job fails due to insufficient free space.
In normal circumstances log file growth was normal. I have exported the histroy of log space couldn't find much info.
We have tried following options to fix this issue but all are went with no sucess.
1) tried with changing database recovery mdel to 'Simple'
2) Shrink the transaction log file and provided 17.5 GB free space.
3) Created addditional transactional log in other disk drive.
Please let us know what do more on this?
Thanks & Regards,
Vinod
Similar Messages
-
Error during client copy in GRC 10.0 -Application exit
Hello Experts,
After installing GRC 10.0,as post installation activity ,
we are doing client copy (accordence with the sap note 1505255).
but we are getting 'Application Exit Error' when executing method FDT_BEFORE_EXPORT_C:
any help would be appreciated.
regards,
vinay singhHI
Can you attach client copy log for analysis.
Regards
Rajan Arora -
Hello,
We are receiving continuous dumps while performing post-processing activities of remote client-copy.
Error details:
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
The termination occurred in the ABAP program "SAPFSSO6" in "SOFD_INSARR".
The main program was "RSSOUSCO_FOR_CC ".Hello,
If your platform is Windows so please add /3GB & /PAE parameter in boot.ini file.
Thanks & Regards,
Charanjit Singh. -
Error in Client Copy--Work process restarted
when i am doing a Client copy of the SAP_CUST profile
i am getting the following error.
<b>"work process restarted"</b>
Pls helpHi,
Run it again, but run in background.
Thanks, then keep looking at scc3.
thanks, -
Error in client copy - EFG_FORM_CC_EXIT_AFTER
Hi,
I am getting the following error while doing client copy,
it has copied all the tables , but at the end it gives message,
===============================================
Target Client 500
Source Client 000
Copy Type Local Copy
Profile SAP_CUST
Status Successfully Completed
User SAP*
Start on 26.09.2007 / 01:48:17
Last Entry on 26.09.2007 / 02:56:00
Statistics for this Run
- No. of Tables 53644 of 53644
- Deleted Lines 2
- Copied Lines 5090006
arnings and Errors
Table Name Component Package
EFG_FORM_CC_EXIT_AFTER CA-GTF-PWB Program Exit has Syntax Errors
EFG_FORM_CC_EXIT_BEFORE CA-GTF-PWB Program Exit has Syntax Errors
============================================================
please advice.
regards,
SMHi Shark,
Your client copy seems to be ended with just warnings. As mentioned, please correct those 2 forms in the source system and try to import to target client. Discuss with apps member whether they need these 2 mentioned forms. If they don`t need it ,you can ignore the warnings.
Perform post processing after client copy.
regards,
Vinodh. -
Data Load Error after Client copy on Source System
We did a client copy to our QAS source system. After that was complete, I tried to do a couple of full data loads. But they fail. The only errors I see are on the source system when I try to manual update the Idocs. They are:
EDI: Partner Profile not available
Entry in inbound table not found
Is there a step I need to take after the client copy and before the loads? I have a feeling that I'm forgeting something.
Thanks,
ChrisHi Chris,
Check the following.
1> Go to WE20 check whether you are able to see two logical system in "Partner Type LS" one for Source and one for Myself.
2> If you say Yes for <1> then check in both the logical system, in the classification tab, partner status should be 'active'.
3> Check you have used REMOTE USER in main and in Outbound and inbound Parameters "Post Processing Permitted tab " for each Message type.
4> go to out bound message type and check the "Receiver port" pointing to correct RFC destination for both ( Source and Myself logical system).
If your answer is no for <1> then perform all the steps.
Hope this will help you.
Suneel -
AFAB: Runtime Error after client copy.
Hi all,
I'm having a problem with the transaction code AFAB (post client copy). After client copy from PRD to DEV, I'm encountering this runtime error "SAPSQL_ARRAY_INSERT_DUPREC - The ABAP/4 Open SQL array insert results in duplicate database records." whenever I tried to perform AFAB. Test run was executed successfully but I cannot complete the actual background processing.
I have try with other asset (in the same client) and encounter the same problem. Likewise, I have successfully completed the depre. if I try the same and other asset (in a different client on the same server).
I've check the number range in FBN1 and have verified that the range is correct.
Any advice as to how I can solve this problem?
Thank you.
Regards.
p/s: if there is duplication, how do I find where the duplication is located and how do I remove this duplication?
p/s 2: the standard SQL that is having this problem is "INSERT COBK FROM TABLE COBK_INS."
Edited by: Sek Yao Ooi on Aug 5, 2010 5:21 AMSolution obtain from snote-83731 ; thanks to SAP-Marketplace's support.
Issue solved. -
Hi all,
I did a client copy in ECC IDES with client 800 as source client.As per the logs , copy is successful.The profile usedf is SAP_ALL.After the copy we logged into the new client which was
created and it looked good. Checked the Logs in SCC3 and it said that client copy was finished sucessfully.However now when we go and execute transactions MM01 and VA01, it is giving a error saying
Batch definition level not found.System inconsistency!
Not sure what went wrong, Any suggestions would be Helpful.
Regards,
Chaitanya.hi...
send the full details of ur client copy....
what is ur target client where u did this client copy .. i mean in prod dev -
/1CN/CRMSAP_PART ddic error while client copy
Hell Gurus
I am doing local client copy.
My source client is 000 and target is 210.
But in between it is giving ddic error for table /1CN/CRMSAP_PART
But copy is still going on.
Please suggest what went wrong.
Regards
YogeshHi,
most likely, everything went fine ))
If you do have problems in special tables, client copy mentions this and reports it as in your case ...
=> This table did not get copied !
First questions: Do you have rows in this table ? If not, you are fine ?
Second: Do a DDIC check in SE11 and you most likely will find the root cause ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de -
Application Exit Error during client copy
Hi ,
I have an ECC 6 system with DB2 database.I get an application Exit error while doing a client copy from 000 to 901.I could see all the tables where copied but the error comes in post processing stage.
Application exit error
function module :FIN_TR_CC_EXIT
package :FINB_TRANSPORT_TOOL
Program ended abnormally
I tried to delete the client and recreate it again.But still it gave the same error.I tried deleting the client gain.But the deletion job cancels .
Plz help meHI
Can you attach client copy log for analysis.
Regards
Rajan Arora -
Hi all,
A client copy was done from PRD to QAS.
It has been found out that the Field name in the QAS and PRD doesnot match in SE16.
In the table BSEC, the field STRAS was present in QAS where as it is displayed as STRAR in PRD. This is in SE16. In SE11, it is STRAS in both QAS and PRD.
Could anyone tell why this might have happened?
Thanks in advance.
Regards,
Adapala.Hi,
SE16 is just a display of SE11 table. So there will not be any change. When you take the table in SE16. From Settings->User Parameters->try toggling b/w field name and field label.
I think STRAS is the Street Address...
If there is any type mismatch the client copy will not happen...
Regards, -
WBSE Layout Detail Screens - Error while Client Copy
Hi
I have 4 Project Profiles like P1,P2,P3,P4.
I customized the WBSE Layout Details with 05 TABs for P1.
I included them in a TR & tried to make a client copy.
End result in the Target client is 09 TABS for P4 profile (actual intention is 05 TABS for P1 Profile as mentioned above)
This is very strange & I am not able to trace from where system picked up ...
1. Entirely different Project Profile
2. How 9 TABs have come instead of 5 TABs
Still,
Source Client shows entries for 5 TABs for P1 Profile
Target Client shows entries for 9 TABs for P4 Profile.
regardsHi Rafi,
TR is created following the automatic TR prompt while configuring only (similar to other standard configs).
I didnot know the point that "TR created from IMG for WBSE Detail Screens will not work".
But I made out the differences in "TCSCR" table entries (got this table from TR details) in the Source & Target clients.
There is a key number field "0002" which is the reason for mismatch in table "TCSCR" in both the clients.
I searched the help but did not get any value add.
What can be the solution now?
regards -
Error while Client copy request - Report Painter
Hi friends,
I am copying a Workbench request from customization client to test client through SCC1. This relates to Report painter report transport for FDI1. However, I am getting the following warning message while transport -
"Program ended with error or warning, return code: 4"
As per my understanding, the above message is a warning message. However, I would like to check if any of you have come across this message? Is this a normal warning message without any negetive system impact?
Request your guidance for the same.
Thanks in advance
HrishiHi Suma,
Thanks a lot for the response.
Yes it is a Workbench request. And I am adding the new report to the SAP Standard report menu under Line Item Analysis.
Also, some COPA tables are getting updated in the background. Is this normal? Are the standard report painter tables related to COPA tables in any manner?
Thanks in advance.
Hrishi -
Note 22541 a error in client copy
i don`t have SAP NOTE account ,can you help me to find thanks
system env : windows2003server r2 sp2 , oracle 10g ,Hi
There is no note for sap note 22541 in service market place,
The inconsistency is in database, Check the consistency of db i.e alert.log
Regards
Bhaskar.T -
Local Client Copy Error : Completed w. Dictionary Errors
Hi,
I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
Target Client 200
Source Client 100
Copy Type Local Copy
Profile SAP_CUST
Status Completed w. Dictionary Errors
User I998769
Start on 06.12.2009 / 12:47:59
Last Entry on 06.12.2009 / 14:00:12
Statistics for this Run
- No. of Tables 56872 of 58391
- Deleted Lines 5705995
- Copied Lines 5770444
Warnings and Errors
Table Name Component Package
A001 SD-MD-CM DDIC Error (See SE14)
A004 SD-MD-CM DDIC Error (See SE14)
A005 SD-MD-CM DDIC Error (See SE14)
A006 SD-MD-CM DDIC Error (See SE14)
A007 SD-MD-CM DDIC Error (See SE14)
A009 SD-MD-CM DDIC Error (See SE14)
A010 SD-MD-CM DDIC Error (See SE14)
A012 SD-MD-CM DDIC Error (See SE14)
A015 SD-MD-CM DDIC Error (See SE14)
Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
Start of post-processing by application exits 13:57:48
Automatic postprocessing of client 200 was incorrect -> long text
Post-processing required for FINB_TR_CC_EXIT_TARGET
Validation/substitution: Programs should be regenerated
Selected tables : 58.391
Copied data in kBytes : 2.933.491
Deleted data in kBytes : 2.845.416
Program ended with error or warning, return code: W
Runtime (seconds) : 4.333
End of processing: 14:00:12
Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.Hi,
We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
Any other options?
Jan
PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
If you still want to remove the inconsistency, you can proceed as described in the following. However, the table must be empty for you to be able to do this (you can check this with the report NROWS: start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
1. Call transaction SE14.
2. Edit DVPOOLTEXT.
3. Delete the database table.
4. Create a database table.
If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
Report NROWS mentions 116.390 entries for table A017.
In SE16 table A017 has 0 entries.
In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
Any tips?
Edited by: Jan Laros on Sep 8, 2010 2:25 PM
Maybe you are looking for
-
How to change Number of Rows in a Tabular Form report page?
Hi I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMI
-
MacBook Pro 13" Late 2011 Internal Speakers Issue
Every time I use my internal speakers (especially on high voice), my speakers' strength seems to lessen after few seconds of sound. But after about 30 minutes or so, the speakers are back to normal, but the same conflict repeats again after using the
-
Recognizing iPhone as a camera.
Today I downloaded the new version of iTunes, and when I plugged in my iPhone, it only came up as a camera, and wouldn't allow me to sync it or do anything really, except for view and upload my pictures from my phone. Help?
-
Hello gurus We are in the planning phase of Seeburger PGP module implementation. While going through the manuals provided with the installation, one of the steps involves creation of a new role and assignment of action manage of application com.seebu
-
Certview Published Credentials arriving in garbled format
Hi, Looked for a while on this forum and couldn't find this. When I provide an email address for my credentials to be published to (i.e. prospective employer) all that arrives is a garbled email full of broken links and html code. Here is a sample of