Error in CO-PA Data Extraction

i created a CO-PA data extractor using KEB0 & it works in the Development system.
Then i transported it to Production & when i try to extract data to BW it gives the following error....
"Syntax error in generated program" and "Errors in source system"
in the detail section the error says "Error occurred in the data selection"

Hi Chris,
We are also facing the same issue in COPA extraction. How did you solve your issue? Please let us know the solution if you have any. Here are the error details...
Syntax error in generated program
Message no. RD117
Diagnosis
A syntax error has occurred in the generated program for the CO-PA extractor:
MSGV1: "RSFHGEN2"
MSGV2: "Field "ZOXDE10248" is unknown. It is neither in on"
MSGV3: " 7"
MSGV4: ""
Thanks,
Yogesh

Similar Messages

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Error while testing Generic Data Source extraction

I've created generic data source for Texts and Attributes in R/3 based on VIEW (Z table)
I get error "Error 6 in function module RSS_PROGRAM_GENERATE" while trying to test the data sources through RSO2
I guess there can be a lot of reasons... Please name me anybody who knows them...
thanx in advance

Hi,
Please Check the OSS note 328948 and it provides solution to same error what you have. Additionally you can have a look into this OSS note 705212 too.
Syntax error in the generated extraction program Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
R3027 "Error & during the generation of the data transfer program"
RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
Hope it helps.
Regards

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

R/3 SP Import:Open data Extraction requests Error

We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.
Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
Please help us with your inputs urgently..
Thanks
Message was edited by:
Ganesh S

Thanks Siggi for the suggestion.
We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
though already deltas are running fine.
Is there any other way around? or deleting the setup table is the only option?
Please help...

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

[sap-bw] SAP HR data extraction errors....into BI 7.0 ...from ECC 6.0..

Hi Gurus,
We are doing HR data extraction with the following details:
Cube: 0PT_C01 - Time and Labor
data source: 0HR_PT_1 - Times from personal work schedule
Records in ECC: 15mill +.
"Init load with Data "is being loaded in packets of 40K records (400 packets approx).
Each time we load (we tried reloading after deleting data and reinit) it is loading same records. But it is giving the following error. Surprisingly this error is coming for different packets in different loads. for ex: 1st time packet 6...2nd time packet 58....3rd time 122 etc.....it keeps changing...
Processing end : Errors occurred
Error when generating the update program
Diagnosis
An error occurred during program generation for InfoSource 0HR_PT_1 and
InfoProvider 0PT_C01 . This may be extrapolated to incorrect update
rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
We reactivated and verfieid update rules. But no use.
Appreciate any kind of help.
thanks in advance.
J.

Oscar,
Thanks for the help.
We tried the following one by one.
1. Delete and recreate update rules. To be frank....there is no CODING or complication in there...
     It did not work.
2. Tried loading only to PSA. It loaded 15mill records perfectly. But when we tried updating target cube,
    same story with many more errors.....earlier we had 10 packages failed out of 387.......
     this time almost every alternate package is marked red and same error....update generating update
     program.....
Hope somebody will come up with a solution.

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Error in data extraction for 0TCT_DS22

Hi All .
I am facing issue in data extraction for 0TCT_DS22 , its giving message 'error in source system ' and also giving a dump
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 24.05.2010 11:22:53
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
As per following thread i updated the table but still data load is failing ( Our system is at EHP1)
DataSource 0TCT_DS22 not extracting Data
Any pointers what could be the solution for this data load failure .
Thanks.

Hi Neetika,
This type of error occures due to lack of memory in server or no process is available for request process.
Please refer below forum.
Re: Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Have you done any custom coding? if yes then check the loop.. endloop statement. (not closing loop)
Thanks & Regards,
Ashish

Position Activity Sequence Resulting in data extracting error

hi gurus
can any body tell me what is this position activity sequence error resulting in data extracting error, plz help. this is very high priority for me.
regards
dev

I rebuild the report using a tabular form and populated the primary key with a PL/SQL expression and now it appears to be working. P1_ISSUE_NO is the primary key on the issue table and I could not figure how to get it in the issue_no field of the tabular report when a new line was entered I ended up putting the following code in for the default for
issue_no on the report:
Begin
return :P1_ISSUE_NO;
end
It works great.

0CRM_SALES_ACT_1:error in loading the data when checking in extract checkor

Hi gurus
I am supposed to extract the data from the data source 0CRM_SALES_ACT_1. But when i am checking using the extract checkor it is giving error saying error occured during extraction. As i am new to CRM please help me the way with which i can handle this situation.
Thanks and regards
vijaykumar

Actually, we have solved the issue another way. We managed to debug the data extraction and pinpoint an activity that actually had a "private" marker set in CRM. This means that the function modules for this extractor cannot extract that activity as it would require aleremote (or whichever rfc user you're using) to be the participant of that particular activity.
Our solution was to remove that marker - it had to be done by the creator of that activity - in CRM, and then the extraxction went smoothly.
If you cannot do it (remove the "private" marker), you could enhance the extractor and exclude in it those acitivites that have the private setting - it should also work.

Master Data Extraction Error

Hi Experts,
I am doing MAster Data Extraction, i have done with major works in R3 Side, but i am facing as issue while distributing the Mode,
Before that i brief the things what i have done,
1) ALE Configuration in ERP R3 System
2) Created a New Logical System for Receiver PI System
3) Created the Logical System for Sender R3 System & Assigning the Client
4) Configured of RFC Destination Pointing to PI System
5) Configured of Communication Port
6) Configurated of Partner Profile
7) Created ALE distribution Model/Customer Distribution Model
After creation of the Model i ahve added the Message type. Then Partner Profile needs to be generated and the Distribution model needs to be distributed from the Edit Menu.
But while doing the above step i am facing a issue as " No Messages have been defined for the selection conditions in the model".
Please do needful.

hi,
if you''re a PI started I'd suggest:
http://www.sap-press.com/products/Mastering-IDoc-Business-Scenarios-with-SAP-NetWeaver-PI.html
chapter:
3 ... Master Data Distribution ... 95
for a good start
Regards,
Michal Krawczyk

BODS 3.1 : SAP R/3 data extraction -What is the difference in 2 dataflows?

Hi.
Can anyone advise as to what is the difference in using the data extraction flow for extracting Data from SAP R/3 ?
1)DF1 >> SAPR/3 (R3/Table -query transformation-dat file) >>query transformation >> target
This ABAP flow generates a ABAP program and a dat file.
We can also upload this program and run jobs as execute preloaded option on datastore.
This works fine.
2) We also can pull the SAP R/3 table directly.
DF2>>SAPR/3 table (this has a red arrow like in OHD) >> Query transformation >> target
THIS ALSO Works fine. And we are able to see the data directly into oracle.
Which can also be scheduled on a job.
BUT am unable to understand the purpose of using the different types of data extraction flows.
When to use which type of flow for data extraction.
Advantage / disadvantage - over the 2 data flows.
What we are not understanding is that :
if we can directly pull data from R/3 table directly thro a query transformation into the target table,
why use the Flow of creating a R/3 data flow,
and then do a query transformation again
and then populate the target database?
There might be some practical reasons for using these 2 different types of flows in doing the data extraction. Which I would like to understand. Can anyone advise please.
Many thanks
indu
Edited by: Indumathy Narayanan on Aug 22, 2011 3:25 PM

Hi Jeff.
Greetings. And many thanks for your response.
Generally we pull the entire SAP R/3 table thro query transformation into oracle.
For which we use R/3 data flow and the ABAP program, which we upload on the R/3 system
so as to be able to use the option of Execute preloaded - and run the jobs.
Since we do not have any control on our R/3 servers nor we have anyone on ABAP programming,
we do not do anything at the SAP R/3 level
I was doing this trial and error testing on our Worflows for our new requirement
WF 1 : which has some 15 R/3 TABLES.
For each table we have created a separate Dataflow.
And finally in between in some dataflows, wherein, the SAP tables which had lot of rows, i decided to pull it directly,
by-passing the ABAP flow.
And still the entire work flow and data extraction happens ok.
In fact i tried creating a new sample data flow and tested.
Using direct download and - and also execute preloaded.
I did not see any major difference in time taken for data extraction;
Because anyhow we pull the entire Table, then choose whatever we want to bring into oracle thro a view for our BO reporting or aggregate and then bring data as a table for Universe consumption.
Actually, I was looking at other options to avoid this ABAP generation - and the R/3 data flow because we are having problems on our dev and qa environments - giving delimiter errors. Whereas in production it works fine. Production environment is a old set up of BODS 3.1. QA and Dev are relatively new enviornments of BODS. Which is having this delimiter error.
I did not understand how to resolve it as per this post : https://cw.sdn.sap.com/cw/ideas/2596
And trying to resolve this problem, I ended up with the option of trying to pull directly the R/3 table. Without using ABAP workflow. Just by trial and error of each and every drag and drop option. Because we had to urgently do a POC and deliver the data for the entire e recruiting module of SAP.
I dont know whether i could do this direct pulling of data - for the new job which i have created,
which has 2 workflows with 15 Dataflows in each worflow.
And and push this job into production.
And also whether i could by-pass this ABAP flow and do a direct pulling of R/3 data, in all the Dataflows in the future for ANY of our SAP R/3 data extraction requirement. And this technical understanding is not clear to us as regards the difference between the 2 flows. And being new to this whole of ETL - I just wanted to know the pros and cons of this particular data extraction.
As advised I shall check the schedules for a week, and then we shall move it probably into production.
Thanks again.
Kind Regards
Indu
Edited by: Indumathy Narayanan on Aug 22, 2011 7:02 PM

Open data extraction orders - Applying Support Packs

Dear All,
I have done the IDES 4.6C SR2 installation.
While updating the support packs, i get the message saying
CHECK_REQUIREMENTS phase.
Open data extraction orders
There are still open data extraction orders in the system
process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
For more details about this problem, see Note 328181.
Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
I have checked the Note.
But this is something m facing for the first time.
Any suggestion!!!
Rgds,
NK

The exact message is :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.

Error when Fetching CATs Data to BI

Hi,
I have created data source in R/3 System (Source System) for CATS data and extracting data Using function Module. Using transaction RSA3 it is fetching all the desired records in R/3 System.
In BI System extracting Full Data and when monitoring it is throwing Error.
Error 7 when sending an IDoc
Error when opening an RFC connection 2
Error when opening an RFC connection
Errors in source system
Function Module for fetching CATS Data
FUNCTION ZLBTIME_GET_CATSREC.
*"*"Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZLSCATS OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
* Example: DataSource for table SFLIGHT
* TABLES: SFLIGHT.
* Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
* Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
* counter
 S_COUNTER_DATAPAKID LIKE SY-TABIX,
* cursor
 S_CURSOR TYPE CURSOR.
* Select ranges
** RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
** L_R_CONNID FOR SFLIGHT-CONNID.
* Initialization mode (first call by SAPI) or data transfer mode
* (following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
* Initialization: check input parameters
* buffer input parameters
* prepare data selection
* Check DataSource validity
 CASE I_DSOURCE.
 WHEN 'ZLTIME_DS_3'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE E009(R3). ENDIF.
* this is a typical log call. Please write every error message like this
 LOG_WRITE 'E' "message type
 'R3' "message class
 '009' "message number
 I_DSOURCE "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDCASE.
 APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
* Fill parameter buffer for data extraction calls
 S_S_IF-REQUNR = I_REQUNR.
 S_S_IF-DSOURCE = I_DSOURCE.
 S_S_IF-MAXSIZE = I_MAXSIZE.
* Fill field list table for an optimized select statement
* (in case that there is no 1:1 relation between InfoSource fields
* and database table fields this may be far from beeing trivial)
 APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE. "Initialization mode or data extraction ?
* Data transfer: First Call OPEN CURSOR + FETCH
* Following Calls FETCH only
* First data package -> OPEN CURSOR
 IF S_COUNTER_DATAPAKID = 0.
* Fill range tables BW will only pass down simple selection criteria
* of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
** LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
** MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
** APPEND L_R_CARRID.
** ENDLOOP.
** LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
** MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
** APPEND L_R_CONNID.
** ENDLOOP.
* Determine number of database records to be read per FETCH statement
* from input parameter I_MAXSIZE. If there is a one to one relation
* between DataSource table lines and database entries, this is trivial.
* In other cases, it may be impossible and some estimated value has to
* be determined.
** OPEN CURSOR WITH HOLD S_CURSOR FOR
** SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
** WHERE CARRID IN L_R_CARRID AND
** CONNID IN L_R_CONNID.
 OPEN CURSOR WITH HOLD s_cursor FOR
* SELECT * FROM zlvctmbw.
 SELECT a~counter a~pernr a~workdate a~skostl a~lstar a~rproj a~awart a~kokrs a~meinh a~tcurr a~price
 a~unit a~bukrs a~ersda a~erstm a~ernam a~laeda a~laetm a~status a~refcounter a~reason a~belnr
 a~catshours a~act1 a~act2 a~task a~lang1 a~narr1 a~lang2 a~narr2 a~cmnt a~clst a~plchl
 b~ltxa1 b~transfer b~hrkostl b~hrlstar b~hrcostasg b~statkeyfig b~catsquantity b~bemot
 c~pspnr c~pspid
 d~kunnr
 FROM catsdb AS a
 LEFT OUTER JOIN catsco AS b ON a~counter = b~counter
 JOIN prps AS p ON p~pspnr = a~rproj
 JOIN proj AS c ON c~pspnr = p~psphi
 JOIN zltproj AS d ON d~pspnr = c~pspnr.
 ENDIF. "First data package ?
* Fetch records into interface table.
* named E_T_'Name of extract structure'.
 FETCH NEXT CURSOR S_CURSOR
 APPENDING CORRESPONDING FIELDS
 OF TABLE E_T_DATA
 PACKAGE SIZE S_S_IF-MAXSIZE.
 IF SY-SUBRC <> 0.
 CLOSE CURSOR S_CURSOR.
 RAISE NO_MORE_DATA.
 ENDIF.
 S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
When fetching data using VIEW in source system it works fine.
When testing for fetching data of SFLIGHT using function module ZRSAX_BIW_GET_DATA_SIMPLE
made a copy of RSAX_BIW_GET_DATA_SIMPLE, it is working fine.
Pls suggest the cause of error.
Regards
Vishal

Hello Praveen,
Connection is fine as I tried fetching data of SFLIGHT using standard template function module which works fine and in transaction sm58 I do not any data.
Regards
Vishal

Error in CO-PA Data Extraction

Similar Messages

Maybe you are looking for