Error in COGI

Hi Experts,
I have an issue with COGI, Client has performed Goods Issue(261) for a particular process order through a background job, later he has done the 262 for the same process order after knowing that he has done 262 for the same with a custom program due to some excess issue happened, while doing the 262 for the Process order system has recorded an Error in COGI as below:
Units of measure Unit 1/ Unit 2 are different
Message no. M7182
Diagnosis
The stockkeeping unit contained in the material document to be cancelled is not the same as the stockkeeping unit contained in the material master record. However, a document can only be cancelled if the stockkeeping units are identical.
System Response
In this case, the system will not cancel the material document.
Procedure
To carry out the reversal, re-enter the given transaction using the relevant reversal movement type.
I have seen in the material master that the BUOM is same as the one which is in the docment which got posted during the 261 movement for the process order.
Also i see that the Alternate Unit conversion factor is maintained for both the units which are maintained in the Material master.
I have suggested client to do manual 262 through MB1A and erase the entry from COGI, but he doesnt want to do it manually.
Can you please suggest if there is any process to get rid of this error and process the 262 for the process order.
Regards
Aravind

I believe you should have addressed this question to PP forum.

Similar Messages

  • REG errors in COGI

    Hi
        I have cleared an error in COGI by keeping qty as 0.That error has been deleted and now stock has not been consumed from production supply warehouse in my plant.How to revoke the deleted COGI error and clear the below issue.
    Regards,
    PradeepM.

    Dear Pradeep,
    It's not possible to revoke the deleted entries of COGI and does the system deletes the entry if we post any entry in COGI with 0
    quantity?
    Was the error related to production goods issue?
    Please check and revert
    Regards
    Mangalraj.S

  • Error in COGS report

    Hello,
    I have a weird error coming up. I have a COGS report in my company. It shows COGS amt, profit ctr, material # and qty. For a particular material #, the COGS amt is popping but the qty is zero. What does this mean? If there exist qty, then only should an amt pop up. Why is amount showing in COGS with qty '0'.
    Any clue anyone???
    Thanks,
    Akanksha

    Hi,
    It is a custom report. I went through the sales order and all delivery details and tables associated with the report. It has 2 different quantities mentioned. Not sure why...
    Akanksha

  • Error in Cogi after cancelling production order- Urgent

    Hi Experts,
    Its me again.
    I would liek to seek your help regarding this problem I have.
    Below is the process done:
    1) Create production order
    2).CO11N : producing qty in quality inspection status (Stocks received in QI status)
    3) QA32                  : accepting inspection lot ( thus the stock will be moved to "unrestricted")
    Due to some errors discovered, prod order needs to be cancelled
    4) CO13                  : Cancel production => mvt 102 will fall into the cogi with error message "Deficit of BA Stck in qual.insp ... etc"
    Could you please help me what to do to solve this error. please

    Hi ,
    If QM is active , you cannot use 322 movement directly.
    For this you need to activate 08 insp type in MM insp set up.
    After that , you can bring the matl back into Quality using 322 movement.
    Dont forget to deactivate the 08 insp type , once your work is over.
    Hope this will helps you.
    Regards
    K.M.Arun

  • 101 Movement error in COGI

    Hi,
    When we are doing the confirmation of production order,if somebody using the same part no in another transaction, stock will not increase and also the same material will go to COGI with reasons of "material is locked by another user"
    Hereby i need material will not go to COGI even another user is using the same part no. what and how  configuration i have to make
    I expedite valuable inputs.
    Regard,
    PS

    Dear,
    In OPK4 there is a setting. This configuration is by order type.
    1.Individual Entry General tab -->put tick mark Godds Movement & Terminate for In correct goods Movement.
    You can also configure an error, warning, or no check in general validity setting tab for over delivery and under delivery.
    Hope it will help. Revert back.
    Regards,
    Alok Tiwari

  • COGI error in PP Module

    Hi friends,
    At my client site one of the  end user has cancelled the production order confirmation ( t code co13) <b>which was settled in september 2006.</b>
    This confirmation was wrongly cancelled in month of Feb 2007 .At this time
    the september month period was already closed .<b>After period closing production
    order was cancelled.</b>
    Now in tcode COGI for the above mentioned order line items are appearing with
    movement type 102 ( for GR ) and 262 ( for GI ).No physical movement of materials
    happened.
    Now i want to remove these errors  from COGI.
    Kindly help to solve this problem.Urgent......
    Regards,
    vsrao.

    Since the period 2006 period was closed,  no inventory transaction posted to SAP - just delete the line in COGI. 
    You can "re-confirm" the order but delete any material rather than let them try to post movements againg.
    Allthea

  • 132 movement type errors in MF47 or COGI

    I understand we get 101, 102 and 131 errors in cogi.. but if there an error while reversing a backflush in REM (132) and if an error occurs, will that be seen in MF47 or COGI?

    Hello Swathi,,
    I am never face the issue of movement type 132 error in MF47/Cogi..
    Whenever we reverse the GR, system just create the planned order and Qty will reduce from the Stock.. It is SAP standard behavior..
    if your reverse qty more then stock qty in that case system pop up error.
    If you have separately back flush MF60 for GI and GR with respect to MFBF, In that case if you try to reverse the GR qty system not create planned order...
    Which error you expecting in MF47 and why ?
    Please check and revert
    Regards
    Umesh Mali 

  • COGI error with SLED reason.

    Hi  Dudes,
    i am getting a error in COGI that "Short fall of 194 days against SLED with current item" for GRN agianst masterial. in the material master of header material period indicator'D', minimum rem. shelf life '0', Total Shelf life '0'. 
    Thanks in advance
    Robert.

    Dear,
    Shelf life Expiration Date SLED takes from the material master record in Plant data/stor1 view.
    Minimum shelf life a material must have available to be accepted by the system Maintain it and check.
    Or change indictor form period indicator'D' to M,
    As you have actived shelf life expiration date in the Transaction: OMJ5 or OMJE
    For further details follow the below link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/a7/e58464dd9511d185170000e82013e8/content.htm
    Regards,
    R.Brahmankar

  • Stop COGI error recording

    Hey All SAP Experts,
    I would like to know if i it possible during the Backflush of components to not record any error in COGI screen even if there's insufficient stock in the time of confirmation ...
    Thanks in advance...

    Hello Mohammad
    In the configuration screen of the 'Parameters of the Order confirmation' for the specific order type check in the Individual Entry General Tab in the Error handling sub-tab
    Click on the Goods Movements checkbox, and it wil allow you to select the Termination for incorrect Goods movements. Tcode OPK4
    it will not create log but it will terminate the session for incorrect postings, though it is not recommended please check if it helps to you.
    Thanks
    Ravindra

  • Thru Collective conf goods posting error neds to be avoided going to COGI

    Dear,
    While doing collective confirmation along with Goods posting, If the stock is deficit then error posting generating in COGI. We need to stop error posting in IW42 itself not allowing to post error in COGI. Customisation is already done for Termination for Incorrect Goods Movement.

    Dear,
    When you post via the collective entry as well as when updating dependent goods movements of the collective order processing, no error handling is provided in Standard SAP. If you do this with IW41 it will work for you. If you set In Customizing of the confirmation (Transaction OPK4), I set error handling in case there are any incorrect goods movements.
    Transactions IW41 and IW42 are both considered to be completely separate transactions. In the individual completion confirmation, a linkage occurs between goods movement and completion confirmation that you cannot find in the overall completion confirmation.
    For this reason, the function  "Incorrect good movement"' leads to a termination in Transaction IW41 and not in Transaction IW42.
    Work around for it schedule the program CORUAFFW in background  using SM36 on hourly basis so it will clear the COGI post processing error.
    Hope it will help you.
    Regards,
    R.Brahmankar

  • TECO in COHVPI for orders with COGI errors

    Hi Gurus,
    We would like process TECO for process orders using COHVPI (possibly in the background) while some of the orders may have COGI errors and thus messages are displayed for each order. Is there a way to bypass these messages as default, causing the the errors to remain in COGI.
    TIA
    M2202

    Hi,
    You can delete the errors in COGI & then do TECO in background mode in COHVPI transaction
    Regards,
    Senthilkumar

  • Error in Goods Movement during order confirmation

    Hi,
    I am trying to confirm a production order through CO11n,but i am getting an error in Goods Movement .
    The following message is displayed in the log -  "* Posting only possible in /11 anperiods 2008d 2008/10 in company code A100*".  Can any one guide me what should i do to confirm the order without any error in Goods Movement,
    Thanks in advance.

    Hi,
    It is advisable to correct the Goods Movement Errors in COGI in the same period (before closing the period by MM in MMPV). You cannot correct the same if the period is closed.
    Only option is you need to open the closed period in consulatation with FI and MM team members
    OR
    Delete the Error movement records in COGI and post the Goods Issue for the production order in Tcode : MB1A with movt type 261 and go inside and mention the materials which you want to issue to the order.
    Hope this will help you.
    regards
    radhak mk

  • Material document cannot be processed Error

    Hello,
    I have issue regarding the material document posting.
    Scenario: Discrete manufaturing
    1. Production order is created for A  177 PC and Operation wise confirmation is done with auto GR.
    2. The stock A 174 PC is issued to other production orders.
    3. Cancellation of confirmation CO13 is done for 177 PC since the stock is not available it has thrown error to COGI.
    4. The error entry is deleted by the user in COGI.
    5. Now they want to post the confirmation with 174 PC and 3 PC scrap.
    But the problem is am not able to cancel the docuement which is posted intially for 177 PC since the error entry is deleted for 102 mvt.
    I tried MBST and MIGO also not able to cancel the document.
    How to go about on this issue. Pls let me know.
    Thanks and Regards,
    Satish

    Satish,
    I hope while cancelling the operation with CO13, the cacellation has been taken place as the entry has been passed to COGI.
    In this case you need to work around the solution
    First of all cancel the material document of issue of the 174 pcs of A to another porduction order.
    Now post an entry of 177 with movement type 102 with reference to the order in MB31.
    In the production order replace the auto GR key with non auto GR key.
    Carry out confirmation with confirmed quantity as 174 & scrap as 3.
    Now in MB31 carry out GR against the order with movement type 101.
    I hope this would work.
    Try it out & revert.
    SmanS

  • Goods Movements Error

    Dear All,
    I have automatic goods receipt via Operation control key.
    But Some time at the time of Confirmation of Process order through COR6, the automatic GR is not posted. Then I have to manually post 101 for the material.
    I have checked the error in COGI, the error is  "Date Error!! Open Period is 08.02.2011". Can anybody tell me what is this error.
    Thanks and regards,
    Girish

    Dear Girish,
    Your period for the Feb month is still not open, thats
    why you get this error, this may be due to your previous periods are not closed.
    So first check the details in the MMRV which states the
    current and previous period. then go to the MMPV and
    close the period of jan, then system will open the
    period of feb.
    Please check and revert.
    Thanks,
    Hrishi

  • COGI at WM bin level

    Hello experts,
    My requirement is to see the PSA negaive bins causing production issues.
    Why cannot we see WM errors in COGI. Do we have any report with combination or IIM and WM?
    Super users are only looking at COGI and clearing then. They are not looking at negatives in BIN. This is causing issues. Right now they are seeing LX03 fro negatives but they want to see as weel in COGI.
    ANy help?

    Hello manu
    The following thread points that, if you does not allow negative quantities on WM customizing and set
    message L9 040 to error, the goods movement should appear on COGI.
    Storage Tpe 902 allow negative stock.
    Did you already try that?
    BR
    Caetano

Maybe you are looking for