Error in COGS report
Hello,
I have a weird error coming up. I have a COGS report in my company. It shows COGS amt, profit ctr, material # and qty. For a particular material #, the COGS amt is popping but the qty is zero. What does this mean? If there exist qty, then only should an amt pop up. Why is amount showing in COGS with qty '0'.
Any clue anyone???
Thanks,
Akanksha
Hi,
It is a custom report. I went through the sales order and all delivery details and tables associated with the report. It has 2 different quantities mentioned. Not sure why...
Akanksha
Similar Messages
-
FRM-92101 error while running report from a button or menu
Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
ArifHello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif -
Error while generating report in RAR
Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DKHello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant -
Failed to commit objects to server. Error while publishing reports from BW
Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-) -
Error in Report: Next to amount field i could see 'ERROR' word in report
Guys,
Problem in Report: Next to amount field i could see 'ERROR' word in report
Eg: Invoice Amount : "1200ERROR" it should be like "$1200".
Pls help where do i need to check.
ThanksAjeet wrote :
Hi,
It can heppens if all the records getting aggregated in the report are of different currencies and not belonging to one currency.
Do a currency conversion for the key figures and make them all with same currency.
See if the records in the cube for the selection which you have given in the report gives you records with different currency and if it is true then as above said.
Thanks
AJeet
Are you sure ???
The mixed unit values will be displayed as * (by default unless its changed).
ERR comes if unit is not maintained. -
Error on Bursting Report for BI Publisher
hi all,
i am getting the following error when i am bursting the report for BI Publisher.
* Nested Exception (Underlying Cause) ---------------
oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerExce
ption
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
a:2116)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:358)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
Caused by: java.lang.NullPointerException
at com.sun.java.util.collections.Hashtable.get(Hashtable.java:321)
at oracle.apps.xdo.batch.bursting.ProcessEnterpriseDocument.processLayou
t(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unkno
wn Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(
Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Sou
rce)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.
java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
arser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown
Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
a:2008)
... 3 more
Kindly Help..
Thanks.Thanks alot Guru for u r reply, i am attaching more Details regarding my error.
In Reporting options i gave
Reporting folder CCB
Reporting server:BIPUbliser url
Reporting password:Admin
Reproting userid:Admin
I already configured Bill Display Algorithm OBLD_CRYS in installation-frame work
Now i am getting the error the value in the field is not a valid value for the field.
In Console I am getting the error '
SYSUSER - 612791-31-1 2011-05-26 11:32:21,709 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (schema.rules.BusinessObjectRuleProcessor$Factory) There is more th
an 1 MO for the service 'CILCSVAP': MaintenanceObject_Id(SA), MaintenanceObject_Id(CM_CONT), using 1st one 'MaintenanceObject_Id(SA)'
<May 26, 2011 11:32:22 AM IST> <Error> <HTTP> <BEA-101020> <[ServletContext@4736418[app:SPLWeb module:/spl path:/spl spec-version:2.5]] Servlet failed with Exception
com.splwg.shared.common.ApplicationError: (Server Message)
Category: 3
Number: 501
Call Sequence: ;CIPCSVAP
Program Name: CIPCSVAP
Text: You are not allowed access (directly/indirectly) to this account.
Description: Please contact your security administrator to check your security for this account.
Table:
Field:
at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1177)
at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1158)
at com.splwg.base.support.cobol.CobolSubprogram.populateError(CobolSubprogram.java:142)
at com.splwg.base.support.cobol.CobolSubprogram.checkForErrors(CobolSubprogram.java:94)
at com.splwg.base.support.cobol.AbstractCobolProgram$CallCobolClosure.run(AbstractCobolProgram.java:214)
Truncated. see log file for complete stacktrace -
Hi All,
I am new to CO, I am in support project, my client had getting error in CO report. Can any one explain the process of kp26 and kkf6n.
Regards,KP26 is used to Price Activity types in a cost center. Pricing activity types (besides giving labor cost) resolves the error message in CK11n concernng activity types not defined for a cost center.
Althea -
I am geting the following error while displaying report-
<b>Internal error (-101) occured [Message 131-183]</b>
The reports are geting displayed on other pcs but not on my pc.I tried unistalling and re-installing sap but the error was not solved.Daan,
The printer was not installed on my pc.After installing printer, the reports are visible.Thanks for u r help.
Regards,
Dilip Kumbhar -
I am getting following error while displaying report in sap business one-
<b>Internal error (-101) occured [Message 131-183]</b>
I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.Hi Yogesh,
I haven't installed any patch on my client machine.
Regards,
Dilip Kumbhar -
HI Gurus,
I have a dimension with single hierarchy, I am able to process the dimension and view the members in a hierarchy on the excel.
On the admin tool under dimension -> Maintain dimension members -> View member Report gives an error that member report cannot be reviewed because of a circular reference and the application terminates. I am able to perform this activity for rest of the dimensions.
Any insight on this.
thanksWhen you select the Dimension, Maintain Dimension Members, the Excel file opens, then click the View Member Report, do you get the interface box that allows you to select the dimension hierarchy and properties to add to your report, or do you get the error only? If you are getting the box called Make Report, and the information in the box states, cannot generate report, Error, there is a problem in the member which may indicate a circular reference, then there IS an issue with your hierachy and memberset. I am suprised that the file processes, but I would guess there a bad reference in the existing hierarchy.
My advice would be to take a portion of the dimension file, (ie delete some of the hierarchy), process it and test to see if you can build a report. Once you get to a point where the report may be built successfully, then add back in portions of the hierarchy until you get or find the error or portion of the file that will not allow for a report to be build. This may be an extreme test, but it should help narrow down the place where the report or hierarchy fails. I have tested examples in my system, and the report will not be constructed if the dimension is not processed succesfully. -
CRVS2010 Beta - Error: No valid Report Source is available
I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86. All installed OK with no errors.
I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in. When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
Please help - newbie and desparate! Thanks
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load("C:\Reports\stoppages.rpt")
myReportDocument.SetDataSource(myDS)
Session.Add("Report", myReportDocument)
crvThisReport.ReportSource = myReportDocument
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 13, 2010 7:22 AMHi Ludek, I tried adding
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
to the config file but it didnt resolve the problems.
However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes. I am posting my code to help anyone else who might be experiencing the same problems:
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load(Server.MapPath(strRptPath))
myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
myReportDocument.SetDataSource(myDS)
myReportDocument.Refresh()
myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
crvThisReport.ReportSource = myReportDocument
DateFrom and DateTo are the parameter names within my crystal report.
It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring. However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation. It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
Thanks for all your help and advise.
Edited by: juliep68 on Oct 14, 2010 11:33 PM -
Error when sending report output to printer from Forms 10g
Hi,
I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
Thanks,
Anna
PROCEDURE SEND_TO_PRINTER IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
rep_server system_variables.reports_server%type;
alldone exception;
BEGIN
select reports_server
into rep_server
from system_variables;
if rep_server is null then
msg_alert('Error getting the reports server name', 'I', FALSE);
raise alldone;
end if;
:ctrl.run_report_errors := 'N';
repid := find_report_object('REP_OBJ1');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
IF :ctrl.rg_print = 'P' THEN
--Send the output to printer.
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
ELSIF :ctrl.rg_print = 'R' THEN
--Rich Text Format
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
END IF;
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
null;
ELSE
:ctrl.run_report_errors := 'Y';
msg_alert('Error when running report.' || rep_status, 'I', FALSE);
END IF;
EXCEPTION
when no_data_found then
msg_alert('Error getting the reports server name', 'I', FALSE);
when alldone then
null;
END;If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel. -
Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report
When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you -
How to get actual error from Crystal Report
We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in AdvanceSame as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek -
Firefox crashes when I open it but there is no error message or report
Upgraded to latest version and worked fine. Today, as soon as I open Firefox it starts to load the homepages and then crashes without any error message or report. Tried to restart PC but problem remains unchanged. Thanks for your help.
Just FYI
QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
http://support.apple.com/kb/DL27 <-- Quicktime 7.5.5
Maybe you are looking for
-
Create a new directory in server with JSP
Hi, How can I create a directory in server with JSP. File dir = new File("a"); dir.mkdir(); does not work. what do I do? best regards,
-
Error message We do not recognize the following information: "null"
How do you determine which field has a null value when you receive the following. The error message was received when using Safari 5.1.7 and numerous operating systems. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.or
-
Can you make sub-genres?
I think I need a smart playlist, but I don't know, there may be a better way than that, and I don't know how to do what I want with a smart list. I have a lot of music and its all in a few categories, gospel, rock, country, jazz, & classical for the
-
How to Consume Web Service?
Hi Experts, I need to call a Function Module in the Exit. In this Function Create to write the code to consume web service created by third party. Then get the Data from there and uodate SAP Can u plz help me with the Steps Involved in this?
-
3-d party proc. intercompany
Dear SD Gurus, Is it possible to use the Third party processing scenario in an intercompany situation? Example: we have in SAP two companies; one is manufacturing and the other is distributing. The flow of goods from the manufacturing to the distribu