Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Similar Messages

Cannot See Transfer Rules in Transport Connection

Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
Nick

Bryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

Transfer rules to the new source system not visible in Transport connection

Dear All,
Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I have also collected them in a Transport request.
Now when I am checking the entire flow in Transport connection, it shows me the transfer rules pointing to the old system only. That is, in RSA1 it shows the new system assignment. But in Transport connection not.
What I have to do so that I can crosscheck in Transport connection all my objects having transfer rules to new system ?
Regards,
Srinivas

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

Error while migrating transfer rules

Hi all,
When migrating <b>2LIS_02_SCL</b> transfer rules to transforamtions I got a shotdump "ASSERTION_FAILED in 'CL_RSTRAN_TEMPLATE->CREATE_ROUTINE" for this I have implemented Snote : 986199 after this when I am migrating transforamtions are getting created but showing syntax errors (for this transfer rules there are standard routines ) .Can anyone help me to sort out this issue.
Regards
KK

Hello,
unfortunately not all transfer rules can be migrated automatically.The migration of the business content transformation is done on customer project base. This means some of the adjustments needs to be done manually.
Please adjust the rules to the ABAP OO compliance.
This how to paper should help:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
and
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
I hope this helps.
Michael

How to collect BADI implementation to transport request

Hi Gurus,
I have implemented BADi. I want collect it to a transport request. How to collect BADI and implemented class.
Any help greatly appreciated.
Best Regards,
Reddy.

Hi,
Goto transaction SE19.
Enter the badi name
click goto=> Object Directory entry
Enter the package name instead of $TMP
Click on SAVE.
It will ask for transport. Enter the TR number.
Best regards,
Prashant

Inconsistant transport requests after local client copy

Dear experts,
our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basic setup and cleanup in the new client, but I'm confronted with problems like objects being locked in orders/requests that cannot be changed in the new client, as they belong to the original source client.
How can I get rid of those inconsistencies? I'd preferred the new client without transports and without locked objects. Is it really necessary that I clean up this mess manually? Would it have been better to clean this up before the client copy? Or could we just do the client copy with another profile in order to avoid those problems?
Thanks for your appreciated help
Andreas

Hello,
Transports are NEVER part of a client copy.
In fact all the data of your transports is stored in tables that are client independent (E07* tables).
This means that you can view (not edit) always all transports from all clients in a specific system.
When you want to edit or release a transport the source client is important (in which client was the transport originally created).
This is stored in table E070C for all transports and can not be overruled.
So I recommend that you don't clean anything related to transports after a client copy because this will also impact the other clients !
Success.
Wim

Regarding Transport request from system to file or product CD

Hello Gurus,
Can anyone tell me how to transport transport request from system to file or product CD.
It is urgent.
Thanks in advance.
Best Regards,
zubera

Hi Albert,
Thanks for your reply.
I want to know the steps how to tranport TP ( tranport request ) from system to file.
Please can you detail procedure or any link to transport TP from SAP to file and file to SAP system.
Thanks in advance.
Best Regards,
zubera

Errors after system copy ...

Dear all,
envi---         AIX 5.3 & oracle 10.2 -
ECC 6.0SR1    ABAP ........only
I have restored a backup of PRD to QAS successfully ... for system copy...
I have created ops$ users with following statments..
create user ops$qlyadm identified externally default tablespace PSAPSR3USR temporary tablespace PSAPTEMP quota unlimited on PSAPSR3USR ( sidadm)
create user ops$oraqly identified externally default tablespace PSAPSR3USR temporary tablespace PSAPTEMP quota unlimited on PSAPSR3USR ( orasid )
Successfully created control file & managed to take the database up...
Enter user-name: / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1728053248 bytes
Fixed Size                  2071840 bytes
Variable Size             872415968 bytes
Database Buffers          838860800 bytes
Redo Buffers               14704640 bytes
Database mounted.
Database opened.
SQL>
after the following action when i tried to startsap. with user sidadm the following is the message..
Checking QLY Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
Start of saposcol failed
Running /usr/sap/QLY/SYS/exe/run/startdb
Trying to start QLY database ...
Log file: /home/qlyadm/startdb.log
/usr/sap/QLY/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
athomedev:qlyadm 26>
As a result when i checked startdb.log the following is the message.......
Fri May 29 16:03:32 IST 2009
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Fri May 29 16:03:32 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-10997: another startup/shutdown operation of this instance inprogress
ORA-09967: unable to create or open lock file
IBM AIX RISC System/6000 Error: 13: Permission denied
Disconnected
Fri May 29 16:03:32 IST 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QLY/SYS/exe/run/startdb: Terminating with error code 12
Request to advice me on the following & also advice me the way i created ops$ users is that right way or not..
rgds,
rahul...
Edited by: Rahul on May 29, 2009 4:21 PM

Dear all,
thanx for sharing,, I have actually odnea mistake after system copy. I tried to make the system up with out creating ops$ suer.
I have followed notes
361641 Creating OPS$ users on UNIX & created ops$ created ops$ user with automated script & from attchment provided in Note 50088 - Creating OPS$ users on Windows NT/Oracle
after that
alter sytem sapr3 account unlock;
system is up & runnig.
regards
ravi kiran

License Error after system copy

Hi,
     After system copy licensing the sap giving this error.
MLICHECK0 in *LIBL type *FILE not found.
MLICHECK__0 in *LIBL type *FILE not found.
MLICHECK~I1 in *LIBL type *FILE not found.
MLICHECK in R3BDDDATA type *FILE already exists.
Alternative name for file MLIC0002 not allowed.
"MLICHECK~0" in R3BDDDATA type *FILE already exists.
Help me to solve the issue.
Thanks and Regards
G Singh

Hi G Singh,
this error message "smells" extremly like RCLSTG *DBXREF !
If this problem is still your pronblem, I would run this command - in restricted mode - takes only about 30-60 minutes ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Error Code 150:30 Photoshop Will Not Open after System Software crash

Error Code 150:30 Photoshop Will Not Open after System Software crash

if mac os,Error "Licensing has stopped working" | Mac OS

Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

Hello Experts
Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
Transport is included with list of Data source Replica, Transfer rules, Transfer structure and Info Package.
My data Source : ZVPRCRDT for an UPFILE
Below is my error screen :
Tried to resolve the error by moving the Data source Replica as an individual Transport.
Still see the same error and my data source is active in the current system.
Looking for a resolution to find out the root cause.
Any help is appreciated...

Thanks for your response Ram.
My Source System UPFILE is in active mode.
Unsure why system is throwing error as source system assignement was inconsistency.
All fields are mapped perfect with one-one relation.
Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
If so can you let me know the approach.
Thanks

Error in Infosource, transfer rules transportation

Hi
I transport the datasources from R/3-DEV to R/3-QA systems . And those are transported successfully. Then i replicated the datasources from
R/3-QA system to BI-QA system.
Now im trying to tranpsort the InfoSource, Transfer rules from BI-DEV to BI-QA system then it says that
<b>DataSource 1_CO_PA_COST does not exist in source system QS1CLNT400 of version A.
QS1CLNT400 - R/3 QA system.</b>
Pls let me know what i need to do
kumar

Hi Ravi,
check in RSA6 whether ur DS is there or not.
If it is not available,then check in STMS whether the transport has been imported or not.If you do not have authorisation to STMS,ask ur Basis guys to check that.
Thanks & Regards,
Suchitra.V

Error adding BW object into a transport request

Hi all, I'm modifying an OHD and when I'm trying to save into a new request I got the following error: "Attention!. The selected object is already locked by another transport request". And it shows me which is the TR that has the object locked, however, when I go to SE10 in order to check if the object its locked there, it is not!. Any ideas on how to solve this problem?
Mauro

Did you try unlocking from SE03 - enter that request which system warned and execute and try collecting the Object again in new request
SE03 - Search for Objects in Requests/Tasks - enter IOBJ - Obj tech name - select Modifiable option and execute .. you will see the request numbers .. where this object is locked

Error in creating transfer rules beween infosource and datasource in BI 7.0

Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.

Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi

Error when activate transfer rule 0DISTR_CHAN

Hi dear all,
I''ve a quesiton urgent, plz.
I've activated IO 0DISTR_CHAN, so his flow before and after. I went to load master data, but I found his transfer rule isn't yet activated. I tried to activated it but a error message like:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        49
Message:    Statement concluding with "...LIKE" ended unexpect
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
Please help!
Thanks a lot.
Juan

Hi dear all,
Thanks!
I tried to re-install this business content just with flow before. And It works.
Best regards.
Juan

Error in collecting transfer Rules in transport request after system copy

Similar Messages

Maybe you are looking for