Error in Commitment Check message

We are on SRM 4.0 and have funds availability turned on in the backend system (ECC 5.0).  A user created a shopping cart using multiple sources.  However, after the cart was approved, it would not transfer to the backend.  We are getting the error message "error in commitment check".  I looked everywhere I can possibly look and have not found anything wrong with the accounts.  I even tried to create the requisition on the backend using the same sources and did not encounter any problems.
Does anyone have any suggestions as to what is causing this problem and how to resolve it?
Monique Stephens

We were able to correct the problem (sort of).  The user had created the shopping cart using multiple accounts and split them by percentage.  The percentages were two decimal places (for example, one account was getting charged 16.66).  But, if we changed the percentage to a whole number (ie 17), the cart went through successfully.
That brings me to another question...is there a limit on the number of decimal places in SRM.  I know in SAP, we can only go one decimal place.  But, I don't know if that is in config or not.  If there is a limit, is there a way to prevent users from going beyond the limit while creating the cart so that we don't encounter this problem in the future?
Monique

Similar Messages

  • Error in commitment check - Message no V2225

    Hi,
    I have activated Fund Management and during posting of Sales Order I am getting the following ERROR.
    "Error with commitment update
    Status is being set
    order can not be billed /delivered."
    From SDN, I have seen a similar error and found solution as below:
    "Check Note 676578 - Commitment check: Incorrect error message"
    I have checked Note 676578 and seen that this note is applicable for Ver ECC 4.7 but we are using ECC 6.0
    Can anybody please let me know what is the compatible Note to ECC 6.0 like 676578 for ECC 4.7
    Any early response will be highly appreciated.
    Regards
    Rahkes

    Hi Rahkes,
    Usually this error message is issued when one of the FM account assignments is not filled.
    Please check note 666322 and turn the trace of FMDERIVE at runtime. Make sure that the account assignment
    is always determined according to your business needs.
    Also please check your integration between SD and PSM-FM:
    1) Check OFUP SD integration should be active
    2) SD customizing settings for FM objects.
           You can set "fund center" as an optional entry in SD customizing settings for field status. This can be checked in the IMG path:
           SPRO -> Public Sector Management -> Funds Management Government-> Actual and Commitment Update/Integration -> Integration -> Maintain Field Status for Assigning FM Account Assignments
           You should have a record with Object type = '04' (sales order).
           It is not necessary to have the field as required (unless you want to insert it in the origin process) due to the fact that
           this can avoid the account assignment derivation between CO objects and FM objects.
           For more information, check note 572729.
    I believe that you want this integration, but if you do not want to integrate sales order process within PSM-FM, you should consider to deactivate this integration in customizing transaction OFUP. In release EA-PS 1.10 and 2.00 modification note 591573 is available.
    I hope this helps.
    Best Regards,
    Vanessa.

  • StorE steel 640GB - data error (cyclic redundancy check) message

    Hi
    I have had the StorE drive for a few months, so lots of data on it.
    Today windows detects it as a local drive and when I attempt to access it I get a message telling me the disk needs to be formatted, when I select no, I get a message saying *data error (cyclic redundancy check*) message.
    Help.
    I have tried two other laptops, both give same response.
    Thanks
    Guy

    Hi, thx for the reply.
    I ran chkdsk see below.
    C:\Users\DADDIO>chkdsk/f
    The type of the file system is NTFS.
    Cannot lock current drive.
    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N)
    help!
    Guy

  • Error in commitment check when creating maintenance orders

    I'm getting an error " Error in commitment check" when creating the maintenance order for procuring the spare parts which is an non-stock item. I checked the cost for the particular Cost center/GL there is no money in that, so thatu2019s the reason for getting the error, so when we did testing in DEVL and QA, we put money into the cost center/fund/functional area and the issue has been resolved.
    Now my client said they donu2019t want that control and they want to remove the commitment check so that you can create maintenance order even though you donu2019t have money on particular cost element.
    FICO person told that there is no AVC check in place, also there is no budgeting control implemented, she also told that when they create Purch requisition directly they are not getting the error even though cost is not in that particular cost element but she wonder why it is giving error when we create the purchase requisition thru Maintenance order.
    I have referred the experts forum to figure out this issue, but everywhere they mentioned this is due to budgeting or funds management issue and ask me to contact FICO person to remove the control, but there is no such person as current FICO person is an end user trained in SAP.
    Your help is appreciated

    Hi,
    We got same error , while procuring through PM order , Please help us , what settings required .., Our version is 4.7EE .
    The note mentioned up to level of 4.6 ,
    Regards,
    Sujana

  • Error in commitment check

    Hello Guys,
    I could not able to save my PM work order for non stock or external services used control key as PM02 .When I try to save it..it throws an error says "error in commitement check -see costing log"
    Please help to fix this asap.
    Akash

    Thanks for your responses. I checked with FI team and it looks like all the settings are activated from their end. They asked me ot check whether I can able to write the PR outside thru me51n instead of auto creation thru maintenance order and I can able to create it...only I have the problem of this error in commitment when I try to do thru maintenance order....
    I am not sure whether I need to do any config from PM as my clients are using budgeting.
    I dont have any idea abt budgeting...pls guide to fix this.
    Akash.

  • Error in Commitment Check - see costing log

    I've encountered error when saving after release of wbs. "Error in commitment check (see costing log)", this error hinders me to create PR for several wbs. please advise how to resolve this issue.

    I looked everywhere in CJ20N to find this Costing Log and I can't find it or figure out how to open it!!
    in my case here I deliberately caused the error by assigning a budget of 95% of the plan --> the plan is all commitment items (material components)
    but I want to check that so called costing log and see the errors in it.
    Your help is highly appreciated

  • Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

    Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
    I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
    and will check online for solution. Please assist as no files will open now
    This is details of error
    Problem Event Name:    APPCRASH
      Application Name:    AcroRd32.exe
      Application Version:    11.0.10.32
      Application Timestamp:    547e9779
      Fault Module Name:    StackHash_147f
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Code:    c000041d
      Exception Offset:    77a011f1
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    1033
      Additional Information 1:    147f
      Additional Information 2:    147ff66574b08dc93180d912e60eb897
      Additional Information 3:    c48b
      Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Can you open Adobe Reader by itself?  If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

  • Ios 5.1 OTA update gives error message ( unable to check for update - an error occured while checking for a sofware update ), can anyone help ?

    i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
    the same thing happens in my ipad too.

    Thank you! I've been trying all day to get this to work! and finally i found the answer!
    amensistech wrote:
    I found a fix for this.
    Go to Wifi    Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
    Set the DNS to 8.8.8.8 and then go back to the software update page.
    This time it shall work.
    I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
    Do rate me and reply if it works.

  • He XML message is going over to SRM from XI , but getting an application error (Exception)  when checking in sxmb_moni on the SRM side

    hi experts  ,
    we are using classic scenario (ECC 6.6 & SRM 7.0)
    we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
    but facing issue.
    The XML message is going over to SRM from XI , but getting an application error (Exception)  when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
    error as below
    <SAP:Category>Application</SAP:Category>  
    <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>  
    <SAP:P1 />  
    <SAP:P2 />  
    <SAP:P3 />  
    <SAP:P4 />  
    <SAP:AdditionalText />  
    <SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>  
    <SAP:Stack>Application has thrown an exception</SAP:Stack>  
    <SAP:Retry>M</SAP:Retry>  
    </SAP:Error>

    Hi Vijay,
    Can you tell us the interface name?
    If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
    You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
    It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
    Let us know if this helps you.
    Regards,
    Mayur

  • LOGON NOT POSSIBLE. ERROR IN LICENSE CHECK -- NO HWid from message Server

    We could logon to the EC6 system. I
    Stopped the EC6 system and started
    it . It started with License Key
    Error. the License key was available
    and was shown in SLICENSE transaction
    but it was giving LOGON NOT POSSIBLE.
    ERROR IN LICENSE CHECK.
    SO I deleted the TEMP and the Original
    License via command SAPLICENSE -DELETE
    and then REINSTALLED THE LICENSE with
    the details
    SAP System: EC6
    Inst. Number: 0020174764
    Hardware Key: Z1686313186
    System Number: 310590866
    Expires On: 31.12.9999
    Key:
    RZKGNA79K9U4F7D7SGGOWU1V
    The License was successfully installed
    but Still the samer error .LOGON NOT
    POSSIBLE. ERROR IN LICENSE CHECK
    Somehow it is not getting the hardware
    key.But when I run the command
    saplince -get then it returns
    saplicense: HARDWARE KEY = Z1686313186
    DEV_W0 log says that
    M  ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c   509]
    M  *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c     306]
    M  *** ERROR => no hwid from msg-server received [likeyapi_w.c 2268]
    Please Help

    Sergo
    My sapmsEC6 has been assigned to 3601 port as my instanace number is 01 . So that is correct. the Thread which has given didn't help . Thanks for you inputs.
    Yogesh

  • Oracle Error occured, while checking for Already Committed data

    Hi,
    In my 1 day old workspace I see more than 3000 errors logged in the owb_error_log_table with text as shown below , can someone from Oracle please advise what the problem seems to be ?
    Oracle Error occured, while checking for Already Committed data : 76291.DBObject.TABLE_1.2.en_GB
    Oracle Error occured, while checking for Already Committed data : 76291.DBObject.TABLE_1.1.en_GB
    Oracle Error occured, while checking for Already Committed data : 42483.PlatformConfiguration.ORACLE.1.en_GB
    Oracle Error occured, while checking for Already Committed data : 42483.PlatformConfiguration.ORACLE.2.en_GB
    There are many more examples of other errors as well. Google returns nothing for these error....am I the first one to face these errors. We are using 11gRelease2 on RHEL.
    They all have a error text of ORA-01403: no data found
    tks in advance.

    I haven't been able to pin it down to a specific action that causes these errors. I have been having various other problems when importing tables ...the screen just freezes and nothing happens. When I queried this table from sql developer to check if I can spot anything and I found these errors.
    The screen freezes when I add a new oracle location - the test works fine - but when I click OK to the add oracle location screen it just freezes and nothing happens.

  • Error message "Save image error! Please check your profile"

    Hi,
    I have installed the second version of the Lens Profile Creator. When analyzing the images all is working fine and it is at the end where the following error message appears -
         -     Save image error! Please check your profile path and permission of the folder.
    I have check and I cant anything that looks strange.
    Have anybody seen this problem before ?
    Thanks for any help solving this
    /Mikael

    Hi Simon,
    Thank you, it was doing what you asked me when I realized that I had previous V1 file from ALPC in the structure.
    Once I removed them It all worked well
    Thanks
    MIkael
    Le 8 sept. 2010 à 04:15, simonsaith a écrit :
    Please go to the ALPC preference dialog and see where is the default save profile location. Check if the folder exists on your system and whether you have permission to write to the folder.
    -Simon
    >

  • I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

    i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

    If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
    Check options.."Web Server: Configuration" within LabVIEW.
    LabVIEW Champion . Do more with less code and in less time .

  • Error message M3775 : Error in recursiveness check for special procuremen

    Hi All,
    I am trying to update the MMR for a material when I save the changes it gives an error message M3775 : ('Error in recursiveness check for special procurement type').
    And also want to know why I am getting this error now, Why it doesnt gave any error at the time when the standerd procurment key was set to the plants.
    Regards,
    Abhishek

    Hi Abhishek,
    There are some similar customer messages with this issue occuring -
    please see the below answers and check if relevant in your case
    When a storage location is planned separately (SLoc MRP indicator '2'
    in MRP4-view), it is automatically replenished by stock transfer from
    the plant. You don't need to maintain the corresponding
    Special Procurement Key in this case.
    Only if you want the material to be procured in another way than stock
    transfer from the plant, the Special Procurement Key
    in the MRP4-view is necessary.
    So you should be able to avoid the message just by keeping the
    Special Procurement Key blank (as it is intended  for stock transfer
    from the plant).

  • HT4623 Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

    Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

    im having a similiar problem but my iphone 4s is stuck in the recovery mode.. like every time i restore the phone to factory setting it redownloads the firmware but nothing changes. any ideas?

Maybe you are looking for