Error in communication channel " not initialized"

Hi All,
       I'm working in FIle to mail scenario. In this scenario whenever i upload a text file to the R/3 application server. that file should be sent (as a attachment with a mail) to any email id. I did all the required configuration in IR. but i'm verymuch confused in ID configuration. I have created both sender and receiver communication channel in the same business system which refers a sender (R/3) System.sender communication channel is working fine. but when i activate the receiver communication channel it shows an error "not initialized".
So kindly let me know,
1. Should i use business system for my receiver end?,If so how do i create it?
2. is receiver agreement, receiver determination, interface mapping necessary? If so, how do i configure it? because i'm not using any recever service since i'm sending mail to my mail box.
note:
It would be very helpful if u refer any link to find out the recever determination and interface determination configuration for this type of scenario.
Thanks & Regards,
hari.

Provide us the XML formed after mapping.
make sure that the msg type name is Mail and the name space name is http://sap.com/xi/XI/Mail/30.
regards
krishna

Similar Messages

  • Error :Receiver File Channel not Initialized

    Hi all,
    I am using a file adapter at the receiver side with file content conversion option. When i post a message it shows an error in the message monitoring as "Reciever File Channel not initialized : Unable to proceed : null"
    Please Help.....

    Hi,
    Check if the adapter is active or
    check on this thread:
    File Adapter Not Initialized Error
    the error might be due to FCC. Jsut remove that and see ift he adapter works.
    Regards
    vijaya

  • Advance selection for source file-Error in communication channel monitoring

    Hi all,
    Referring to the link below:
    <b>/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
    I have developed my scenario in the same way.But due to the values <b><NOTHING></b>
    in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
    Plase note that  our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
    Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
    Thanks & Regards,
    Sudhir Tiwari

    Sudhir,
    In the sender file adapter, you have an option called <b>"Processing Sequence"</b>.
    By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
    In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
    Regards
    Bhavesh

  • File to Proxy Scenario : Error in communication channel monitoring

    Hi,
    I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
    u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
    File will be picked from the FTP server.
    I have created File system in SLD of type "Third Party", Can this be the issue?
    Please guide me on this.
    Thanks,
    Chandravadan

    Hi!
    Check if the tcode SLDCHECK is ok!
    Check note #764176.
    Also, refer to link below and execute each steps from the links there MANUALLY.
    Wizard-Based Configuration:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
    Regards,
    Caio Cagnani

  • LMS 3.2 Internal Error in Communication Channel

    Hello,
    I am having an issue with the DCR in which I get the error "Internal Error in Communication Channel" after trying to edit the credentials of a device.
    It started when I tried to add a device to the DCR, with all credentials, and it wouldn't show up in the DCR. I tried this 3x, but no luck. I was eventually able to do so by using the Bulk Import, and having the single device (with all the credentials) in the .csv file.
    Now that the device is in the DCR, I need to edit the User Defined Fields - but when I try to, I get the error mentioned above.
    I've seen other threads here that talk about multi-server setups, and FQDNs, but I'm not using any of that. I've also noticed that there is a bug ID for it, CSCtd07131, but it says 'release-pending'.
    Am I up the creek until an update comes out? (its not just user defined fields, btw, I'm unable to modify any credentials.)
    Thanks

    When you restart the ciscoworks processes you should always give a couple of minutes and log on when the cpu starts to come down.
    If it continues to error when you add or modify you better open a case with the tac.
    The bug you mention is only if you have multiple systems with a master and slave DCR
    Cheers,
    Michel

  • DCR - error in communication channel

    Hello,
    We use LMS 3.1 with the available patches installed.
    I wanted to configure some device credentials and identities.
    After clicking "Apply" the following error was displayed:
    "Internal error in communication channel."
    I attached the dcr.log for further information.

    Hello!
    I am having the same problem - sometimes I get the error message - sometimes not.
    I am having on-access virus scanning enabled and do not want to disable the scanning on the NMSROOT directory.
    Can you tell me the name of this process that causes this conflict?
    Then I could disable the virus scanner for this process!!
    Thanks!

  • Error in communication channel javaxresourse.Resourseexception

    We are getting an error in communication channel javax.resourse.Resourseexception. We are send a payload witn size in excess of 10mb. I also have a message which is in delivering status for quite some time now after which our communication channel stopped working and startwd to give tthis error. Could it because of this message ? Or i need to increase size parameter . In which tcode or place wherei can see the permited file size. I am new to pi and and seeing this error for tje firat time . Request your  help

    >Could it because of this message ? Or i need to increase size parameter . In which tcode or place wherei can see the permited file size. I am new to pi and and seeing this error for tje firat time . Request your help
    Go to SXMB_ADM and click integration engine configuration -> click edit mode configuration -> see the tuning parameter EO_MSG_SIZE_LIMIT set and value of it. If it not set, talk to basis to set the this tuning parmeter and value desired.
    Search SDN on this topic for further details

  • Ciscoworks -- Intrenal error in communication channel

    Hi Netpro Team,
    I am getting an error "Intrenal error in communication channel" while editing or adding/deleting snmp credentials
    in common services...(LMS-3.x);
    We tried restarting the ciscoworks services, but still getting the same problem.
    Please help to resolve this problem

    Yes, Re-installed should take care of the issue..
    However here the links for Patch (CS 3.3  and CS 3.2..apply which ever is applicable)
    http://www.cisco.com/cisco/software/cart.html?imageGuId=9EE33249152B32176193349929E47597B46DC3C5&i=rs
    http://www.cisco.com/cisco/software/cart.html?imageGuId=0C4F05EB3894563EC7BEC44C3E7D494AC34E9B88&i=rs
    Thanks
    Afroj

  • Error in back routing Error in communication channel

    Hi Friends,
      I am sending the Idoc from ECC250 to ECC150 using XI, whenever I am sending the Idoc, I got this error Error in back routing Error in communication channel in SXMB_MONI.
    In IDX2 also I got this error I:000.
    Please suggest me how to resolve this issue.
    Regards,
    Shalini Shah

    Did you cross checked all the configurations are in Place.?
    I understand that the idoc has been received from ECC250 ,Are able to see the payload (i.e idoc )
    in SXMB_MONI ?
    IS configuration steps like
    Receiver determination,
    Interface determination
    are correct?
    Rajesh

  • Error in JMS Communication Channel not raising alert

    Processing Errors in JMS Communication Channel are not raising alerts.
    The settings on the communication channel retires are set at 3 and 5min interval.
    In RWB the JMS communication channel shows processing errors but an alert is not raised.
    The alert are configured in our system and we even have a catch all alert rule with * (wildcard). Errors in PI message processing are raising alerts but errors in Comm Channel are not raising alerts.
    The message in SXI_MONITOR shows as processed successfully but when we check the RWB and Comm. Channel Monitoring we see processing errors "Channel error occured; detailed error description: JMS error: Connection to the server has been terminated; Linked error: Connection reset, Error Code:null"
    Are we missing any configuration? How do we get alerts/notifications if there are errors in Comm. Channel without having to login into RWB and watch it periodically?
    Any help is greatly appreciated.
    RM

    Hi,
    What is the staus of Communication channel in RWB when it fails, RED ??if yes then it should genarate alert.
    create one more alert for specific to JMS interface and check it out.
    Regards,
    Raj

  • PI 7.1 RFC Communication Channel not found

    Hello,
    We have recently upgraded to PI 7.1 and I am having a problem getting my RFC adapter to work.  This is the error message:
    Error when calling an adapter by using the communication channel CC_UDF_RFC_CALL_TO_PI_ABAP (Party: , Service: IS_D06, Object ID: 5873a160602e3be5866ab820596b752c) The channel with object ID 5873a160602e3be5866ab820596b752c could not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache
    I went to SXI_CACHE and refreshed (Delta nad Complete).  I can see that the CC exists in integration builder.  
    How can I determine what is causing this error?
    Thanks,
    Matt

    Also check the cache notification after activating the Comm channel in ID whether cache is properly updating for the changes in the comm channel.
    Menu--> Environment --> Cache Notification
    If cache notification is proper thentry to refresh CPA cache using following URL and execute ur scenario.
    [http://<host>:<port>/CPACache/refresh?mode=full]
    Edited by: Samiullah Qureshi on May 14, 2009 8:36 AM

  • Error in communication channel in PI 7.1 Server

    PI 7.1gives the error shown below when I check the status of the communication channel in the Run Time Workbench. .
    Error: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.
    This occurs after I restart the system , before the restart everything seems to be working fine . This is a vexing problem which is recurring.
    I have tried the sap notes
    764176
    809420
    97860
    1031321
    1117249
    1444430
    1506101
    That includes
    1. creating a BS system for the JAVA AS
    2. restarting the rwb/adapter/dir/repository etc components
    3. releasing locks
    4. delayed start of jco etc .
    Can anyone suggest a possible solution . would installaing PI 7.1 EHP1 make the SLD problem go away ?
    regards
    Rajarshi Muhuri

    Hello
    It is always recomended to run in the latest EHP. Please refer to the following URL's regarding same:
    http://service.sap.com/sp-stacks (SAP Support Package Stack information) and
    http://service.sap.com/patches (patch information).
    SAP note 19466 will also assist here and following the updates please re-test and reply if further help is necessary.
    Regards.

  • Error opening communication channel in PI 7.1

    Hi All,
             I am getting an error while opening communication channel in PI 7.1
    The error is:
    Attempt to access the 1 requested objects on 1 failed. Detailed information:
    com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object
    Adapter Metadata File | http://sap.com/xi/XI/System, type AdapterMetaData
    from application REPOSITORY on system REPOSITORY failed. Object does not exist.
    Detailed information:
    Software component version with key ID: 3b787a8035c111d6bbe0efe50a1145a5 not found
    Can anybody please help me to fix it?
    Arindam

    Hi ,
    Please check the note mentioned below.
    Note 1337902 - Missing object after PI cache refresh for existing ESR obj.
    Thanks
    Rishi Abrol

  • Error in communication channel AS2 Seeburger EDI Adapter

    Hi,
    I am facing one issue in communication channel at receiver side. Adapter type is AS2 Seeburger EDI adapter.
    Brief overview of scenario: Sender is R/3 sending an IDOC and Reciever is Party (Vastra_Gotaland).
    The error in reciever communication channel is : Error type: REPORT_ERROR >> Error date: 8/26/10 10:18 AM >> Description: MIC not verified # integrity-check-failed [8/26/10 10:18 AM].
    Please give your important feedbacks.

    Hi Vikrant,
    I have already checked channel configurations and there is no problem with signing certificate. I have checked that also.
    Edited by: Sadhna Achhra on Aug 26, 2010 1:10 PM

  • Page cannot be displayed error in Communication channel monitoring

    Hi,
    when i am trying to click on Communication channel monitoring from RWB it shows me the error " Page cannot be displayed".
    I am testing this for the for the first time in QA environment.
    But in development , CC monitoring works fine in the same Laptop.
    I have checked the hosts file and it has the IP address and system name present in it.
    i have checked in my collegues laptop and it opens there, but it doesn't open in my laptop.
    we are using PI 7.0, windows XP and IE 7.0.
    Could anyone help to solve this problem?
    Thanks
    JJ

    I am able to open the communciation channel if i am using the path http://<full qualified host>:<http port>/mdt/channelmonitorservlet
    This means that there is a problem in the host file....the changes are not getting reflected.....did you log-ff and then again login?
    instead of the FQDN you can also open the page using the IP address of the server.
    I am really sorry I am unable to give you points, since the Star icon is not displaying in the browser to award points
    This may be because you did not mark the thread as a question
    Regards,
    Abhishek.

Maybe you are looking for