Error in Component Loading the File

Dear Expert,
Good Morning!
I tried to import license but error message "Error in component loading the file" appear. Can anyone help me on this?
Thanks

hi Sandra,
please make sure that your License file is correct and also take note of your SBO version and PL. this maybe the cause.
i.e
your SBO is 8.81 PL: 04, then your should use a license file that is for 8.81 version and not the older version of License file.
regards,
Fidel

Similar Messages

SQL Server 2012 Express - Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop

Windows 7 Home Premium, SP1
64-bit
I just installed SQL Server 2012 express - Express with Advanced Services (contains the database engine, Express Tools, Reporting Services, and Full Text Search),
file name - SQLEXPRADV_x64_ENU.
Opening SQL Server Management Studio causes the error -
"Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop,
Version=7.1.40304.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The
system cannot find the file specified."
Do I need to install another file? Did I download the wrong version?
Any suggestions? Thanks for any help.

Hello,
The issue may occure when the installation of your SQL Server is not a complete or a successful one. Did you try to repair or reinstall the SQL Server Express? You can also try to install
Service Pack 1 for SQL Server 2012
to check if the issue presists.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

RapidMarts - "Open file error" R3C-150607 loading from file

Hello experts.
We are installing RapidMarts for the SA-module, but when executing the main workflow in Data services we get an error trying to load the file dates.dat.
The generated ABAP looks just fine, and the file exists where it should be (in SAP working directory), but still not able to load it.
This is the error msg:
Data flow DF TimeDim SAP - Execute ABAP program <E:/RM generated ABAP dir/TimeDim.aba> error > Open File Error -- E:/RM Working directory/dates.dat>.
We have the following setup:
Windows server
MS SQLserver 2005 database
SAP BO Dataservices v12.2.9.0
SAP BO RapidMarts for v12.2.0
Any good ideas on how to fix this?
Thanks in advance!
Best regards,
IngA

Hi again.
The problem is solved.
When configuring the R3 datastore in Dataservices we assigned the different directories (working dir, generated ABAP dir etc.) on a server that's NOT our R3-server.
When we changed this to use folders on our SAP-server it works just fine (for this at least)
Cheers, IngA

System error 988 whlie loading the LabView eun-time engine (C:\Program file\....\\lvrt.dll)

I am trying to use NI devices with Lazarus (there is no pascal section, so I post here).
When I try to run my application:
DAQmxBaseCreateTask('TaskHandle', TaskHandle);
DAQmxBaseCreateAIVoltageChan(taskHandle,'Dev1/ai0','',DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,'');
I get the following error message:
„System error 988 while loading the LabView eun-time engine (C:\Program file\....\\lvrt.dll)
nidaqmxbaselv requires a version 2010 (or compatible) LabView run-time engine. Please contact the vendor of nidaqmxbaselv to correct this problem.“
I installed LabView run-time engine 2012, but I still get the same error.
Then I tried to install LabView run-time engine 2010- the same result.
I removed LabView run-time engine 2012- same result.
I tried to install LabView run-time engine 2010 again (since I did not see it in the add/remove list)- then I noticed, that the installer shows „A newer version is already installed".
What shall I do?

Hi,
   Can I ask the same question too?
   I am using
   Windows 7 sp1 x64
   Visual Studio 2010 pro
   NI USB-6009
   ni-daqmx base 3.4.5
I created a empty win-32 console project and putted the ANSI C Example program: acquireNScans.c with the include file and lib file of nidaqmxbase in the same folder. I added this line on the top of the source code #pragma comment(lib,"nidaqmxbase.lib"), built without any error. When I tried to run it, I got this same message.
  I tried changing to shared dll mfc and delaying linking lvrt.dll, but did not work.
  Looking forward to your reply.
all the best.

Lastest Itunes version loaded - Receive the following error message when trying to download a music CD: "Error occurred while converting the file (title of CD) A file was specified instead of a folder."

OS X Mavericks with latest itunes version loaded.
Receive the following error message when attempting to download a music CD: " Error occurred while converting the file (name of music CD). A file was speceifed instead of a folder."

The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

LMS 4.1 error unable to load the MIB file

when load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI
I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my
Thank

The following thread has RFC-1212.my in it. You can downlaod from there :
https://supportforums.cisco.com/thread/174886
Mostly all the Cisco MIB will be available @ :
ftp://ftp.cisco.com/pub/mibs/v1/ OR ftp://ftp.cisco.com/pub/mibs/v2/
The above you requested are non-cisco mib, which can be extracted either from RFC or they canbe found in some univerisites FTP or some free sites like oidview :
http://www.oidview.com/mibs/detail.html
-Thanks
Vinod

When I down load the file i get (error 1004 please try again)

when I down load the file i get (error 1004 please try again)

Try this first. Go to Settings>Safari>Clear History, Cookies and Cache (or Data if you are running iOS 5). Restart the iPad. Hold the sleep button until the red slider appears and slide to shut down. Hold the sleep button until the Apple logo appears to power up.
If that doesn't work, look here for more help.
http://support.apple.com/kb/TS3694#error1004

D4O-1009 An error occurred while loading the worksheet

hye everbody
i create a worksheet in discoverer plus olap but i get the error *"D4O-1009 An error occurred while loading the worksheet"..*
even i uninstall the catalog and install the catalog..
when i create the worksheet and saved..of i exit..and try to open back...it show this error..
this is the diagnosis for the connection...
<D4OCheckConfig version="1.0.0.0">
<Check key="JDK version" value="1.6.0_16"/>
<Check key="BI Beans internal version" value="3.2.2.0.24"/>
<Check key="Discoverer Plus OLAP version" value="10.1.2.07.75"/>
<Check key="Discoverer version" value="10.1.2.48.18"/>
<Check key="port" value="-1"/>
<Check key="Connect to database" value="Successful"/>
<Check key="JDBC driver version" value="10.1.0.3.0"/>
<Check key="JDBC JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
<Check key="Database version" value="10.2.0.1.0"/>
<Check key="OLAP API Server version" value="10.2.0.1.0"/>
<Check key="OLAP AW Engine version" value="10.2.0.1.0"/>
<Check key="OLAP Catalog version" value="10.2.0.1.0"/>
<Check key="BI Beans Catalog version" value="3.2.2.0.24"/>
<Check key="Discoverer Catalog version" value="10.1.2.07.75"/>
<Check key="Authorized for Discoverer Plus OLAP catalog" value="Yes"/>
<Check key="OLAP API JAR file version" value="9.2"/>
<Check key="OLAP API JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
<Check key="Load OLAP API metadata" value="Successful"/>
<Check key="Number of metadata folders" value="3"/>
<Check key="Number of metadata measures" value="19"/>
<Check key="Number of metadata dimensions" value="17"/>
this is the error when i save the error in a notepad...
oracle.dss.d4o.common.D4ORuntimeException: D4O-1009 An error occurred while loading the worksheet.
oracle.dss.bicontext.BINamingException: BIB-14099 Unknown naming exception.
oracle.dss.bicontext.BINamingException: BIB-14067 Persistable object threw exception during lookup on method setXMLAsString; component class oracle.dss.dataSource.QueryServer; exception null.
i not have any clue...why this thing occur..
any idea why this thing occur...
thanks in advance....
regards,
rao..

Hi Rao
Please don't keep creating new postings for the same issue as it is hard to keep answering multiple posts about the same thing.
If you have done all of the things suggested by Keith in my previous reply, which as I say is what I would have done, then you really ought to raise this as a service request to Oracle.
I'm advising this because the particular error you are encountering does not come up in my database of fixes neither could I find any reference to it in either the OTN or MetaLink forums. This needs to be brought to Oracle's attention.
Best wishes
Michael

System Error 998 While loading the Labview Run-Time Engine

Hello.
I have a DLL made with LV 7.1 I run the dll using a C compiler and works great in WINXP, but cannot run in Win2K. Error is:
"System error 998 while loading the Labview Run-Time Engin(c:\program
files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
READVOLTAGE requires a version 7.1 (or compatible) Labview Runtime
Engine. Please contact the vendor of READVOLTAGE to correct this
problem"
READVOLTAGE is my function inside the dll. The runtime is already
installed. I tried it in another WINXP running machine and works fine.

This is actually a Microsoft bug with statically loaded DLLs. There are a couple of workarounds for it, and I have included two links below to posts that address this issue:
Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC
I get error 998 when calling a LabVIEW buildt DLL from MSVC++
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

Message'there was an error opening this document.The file cannot be found'

Using xp home and when I click to download the pdf file, it will give 3 options been 'open'/'save'/?. When I choose the 'open' option, it will give me the above message "there was an error opening this document.The file cannot be found"
owever if I choose to "save" and I will be able to open the file and read it. In this pc its using Adobe Reader 8.1.2 with a patch. It was working fine prior to this sudden occurance of the error.
Strangely I have another pc with the same specification, I was able to choose "open" and be able to read the file. Can anyone help to resolve the issue by using the "open' option instead of "save, then open". Greateful for your prompt response.

Fyi, in addition to my earlier post, the other pc is using Adobe 8.1.1 and no other patch. I was trying to find 8.1.1 version but could not find a trust worthy site to load from. Do you think the error caused by using the 8.1.2 version? Thanks

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
    <G_PLAN_CODE>
      <PLAN_CODE>03101C3003</PLAN_CODE>
      <PLAN_NAME>03101C3003_test</PLAN_NAME>
      <PLAN_EM>John</PLAN_EM>
      <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
      <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
      <PLAN_HOSTS>abc_super</PLAN_HOSTS>
      <LIST_G_PURPOSE>
        <G_PURPOSE>
          <PURPOSE_CODE>11600000</PURPOSE_CODE>
          <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
          <LIST_G_PURPOSE_CODE>
            <G_PURPOSE_CODE>
              <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
              <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
              <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
              <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
              <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
              <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
              <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
            </G_PURPOSE_CODE>
          </LIST_G_PURPOSE_CODE>
          <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
          <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
          <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
          <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
          <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
          <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
          <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
        </G_PURPOSE>
      </LIST_G_PURPOSE>
      <LIST_G_PLAN_SUBSQL2>
        <G_PLAN_SUBSQL2>
          <GL_DATE>31-07-12</GL_DATE>
          <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
          <AP_UNAPP></AP_UNAPP>
          <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
          <PLAN_CODE1>03101C3003</PLAN_CODE1>
          <PLAN_EM1>Elly</PLAN_EM1>
          <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
          <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
          <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
          <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
          <DESCRIPTION>101 year</DESCRIPTION>
          <CF_GL_DATE>101.7.31</CF_GL_DATE>
        </G_PLAN_SUBSQL2>
      </LIST_G_PLAN_SUBSQL2>
      <CF_START_DATE1>99.1</CF_START_DATE1>
      <CF_END_DATE1>102.11</CF_END_DATE1>
      <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
      <CF_OU_NAME1>IT Department</CF_OU_NAME1>
      <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
      <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
      <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
      <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
      <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
      <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
      <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
      <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
      <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
      <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
    </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

System error 999 while loading the Labview Run-Time Engin

Bonjour à tous,
J’ai un PC avec un Runtime LV71.1 qui me retourne l’erreur suivante. Je ne trouve pas d’info sur cette erreur. Une Idée sur la cause ?
System error 999 while loading the Labview Run-Time Engin(c:\program files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
Luc Desruelle | Voir mon profil | LabVIEW Code & blog
Co-auteur livre LabVIEW : Programmation et applications
CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW
Résolu !
Accéder à la solution.

Bonjour Maxime, merci pour ta réponse qui est très intéressante. Le soft est en LV7.1.1 est fonctionne depuis plusieurs années. Le PC est chez un client, dans un pays très « hostile », je n’ai donc pas accès à ce dernier. Un superviseur local m’a fait le retour qu’après redémarrage du PC ce dernier indiquait un problème, avec photo pour descriptif. Je n’ai pas plus d’info pour le moment. Je viens donc de demander un CHKDSK c: /F
Luc Desruelle | Voir mon profil | LabVIEW Code & blog
Co-auteur livre LabVIEW : Programmation et applications
CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

An error occurred when loading the Cube ; Analysis services 2012

Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/

Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

Error: Unable to load the GSS-API Shared Library

Hi all,
I'm trying to install a working copy of SAP on a Debian Etch host. I've tried all versions available here: ftp://ftp.sap.com/pub/sapgui/java/ (710 r[2-6]) The jar installer completes successfully without error, but when I attempt to launch the application, I'm greeted with the same critical error each time. Here's my connection string:
conn=/M/my-server-hostname/S/3610/G/PRD_GENERIC&sncon=true&sncqop=3
Here's my (Sun) java version:
java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) Server VM (build 10.0-b22, mixed mode)
Here's the full error message:
Error: Unable to load the GSS-API Shared Library
named "sncgss.so"
Fri Nov 21 16:07:25 2008
Release 710
Component SNC (Secure Network Communication), version 5
rc = -1, module sncxxdl_mt.c, line 342
Detail SncPDLInit
System Call dlopen
Is there a software dependency I might be missing? This is my first attempt at installing SAP on a Linux host, so there may be something else even more obvious that I'm not seeing...
Thanks in advance for any help you can provide.
-Eric

Hi,
one solution should be to set the env variable $SNC_LIB to you libseude.so, e.g.
$>setenv SNC_LIB /usr/sap/<sid>/SYS/exe/run/libsecude.o (or wherever the lib resides)
and then restart guilogon.
Also, as fas as I know, SAPGUI has issues with Java 6, so I would rather go with Java 5 or 1.4.2.
Oliver Stabel

Error in Component Loading the File

Similar Messages

Maybe you are looking for