Error in Configuration of OID

Dear All,
I have an error when i install infrastructure, as when finishing the installation and start the configuration assist, i'm always get error in configuring of Oracle Internet Directory and the error that appears below said that the object is already exist and the OID server could not started and the code was LPAD:error code 68.
can pleas any one assist?
Thanks

Hi,
Successful message is good!   And for the SAME exact user in the backend inbox (access the R/3 backend that you are connecting the UWL to) how many workflows are in the backend inbox for the same user in SBWP?
If there are no workflows for the same user, try kicking some off then accessing the UWL.
You can also attach the latest default trace here to the message and I can see then if we can find out where this is going wrong for you.
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

Similar Messages

  • Error While Configuring the Shared Service with Active Directory

    Hi All,
    I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
    "EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
    The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
    But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
    "The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
    Example: cn=admin,dc=myCompany,dc=com
    But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
    Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
    Thanks in Advance,
    Sunil

    Thank you All,
    i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
    after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
    Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
    Thank you once again Friends....
    Regards,
    Sunil...
    Shantan....

  • Error while configuring saprouter

    Hi,
    I m getting error while configuring saprouter.
    When i run the command get_pse -v -r certreq -p local.pse"DN name".I get the following error.
    get_pse: Malformed distinguished name "pqprojsrv  CN=pqprojsrv, OU=0000756782, O
    U=SAProuter, O=SAP, C=DE"
    ERROR in Name2DName: (12321/0x3021) problem parsing DName : "unknown key or malf
    ormed OID"
    ERROR in aux_Name2ObjId: (1/0x0001) unknown algorithm : "PQPROJSRV  CN"
    Please suggest on this .
    Thanks in advance.
    Regards,
    Amit

    Hi,
    I resolved tht issue.but  now when im starting saprouter it gives me following error :
    trcfile  dev_rout
    no logging active
    routtab  cannot open './saprouttab': EXIT PROGRAM !!!
             (running without saproutab is no longer supported for security reasons)
    Could not open permission table
    saprouttab is nt created in saprouter directory.
    Please suggest
    Thanks in advance.
    Regards,
    Amit

  • Error in  Configuration of Infrastructure

    Dear All,
    I have an error when i install infrastructure, as when finishing the installation and start the configuration assist, i'm always get error in configuring of Oracle Internet Directory and the error that appears below said that the object is already exist and the OID server could not started and the code was LPAD:error code 68.
    can pleas any one assist?
    Thanks

    Hi Raj,
    <b>Reason and solution for the error.</b>
    1. SAPJRAFactory_LANG(i e EN) settings are not correct, make them correct according to your installation type of J2ee-Engine (Cluster or Standalone).
    Please set the following properties on SAPJRAFactory...
    <b>For standalone  Installation -:</b>
    SAPClient - <Client>, for example, 000
    ServerName - <Server Name>, for example, bcemain.wdf.sap.corp
    <b>PortNumber</b> - <System Number>, for example. 01
    Language - <Language Key>, for example, EN
    UserName - <User Name>.use service user with RFC Autorizatn
    Password - <User Password>
    <b>For Cluster Installation-:</b>
    SAPClient - <Client>, for example, 000
    SystemID - <System ID>, for example, BCE
    MessageServer - <Message Server>, for example, bcemain.wdf.sap.corp
    Language - <Language Key>, for example, EN
    UserName - <User Name>. service user with RFC authorization
    Password- <UserPwd>
    Here is the link to configure it-:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/1d7d843fce3566e10000000a11466f/frameset.htm
    2. After doing above steps restart the engine.
    Hope this helps you.
    If you get the same error again then please send the property list you set in SAPJRA.
    Regards,
    Satyendra

  • Error reading configuration file

    I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
    [] 2012-12-20 22:46:32,176 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
    [] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
    com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
              at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
              at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
              at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
    Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
              ... 7 more
    Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
              ... 9 more
    I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
    Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
    Any ideas of why the Validator.bat can't read the configuration file?

    I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
    I have my license server setup (its the Protected Streaming version).
    I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
    I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
    I am using the local key mode to remove one more variable (I have setup a remote key server as well).
    I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
    When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
    DRM error Major[3363] minor:[0] NSError:(null)]
    From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
    I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
    Colour me frustrated

  • I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
    Thanks in advance.

    u87 wrote:
    Thanks for the reply.  This at least tells me that going back to LV2010 is not likely to solve the problem.  The missing dll's are:
    MFC90D.dll
    MSVCR90D.dll
    IESHMS.dll
    WER.dll
    And, once again, IESHMS and WER have other dependencies.  So perhaps i need to install the Visual C++ development environment.
    IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
    WER.dll is Windows error reporting for Vista/Win7.
    MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
    So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
    What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • One of my dll's in my vi doesn't run with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3"  So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    Thanks in advance.

    Hm,
    it seems that you might have more success in the LabVIEW forum here; this one is for LabWindows/CVI...

  • Error 1070023 Configured Disk volume does not exist.

    Hi
    I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
    Error 1002097 Unable to load database Basic.
    The App log showed the following error
    Error 1070023 Configured Disk volume does not exist.
    Please help..

    So everything works when the volume is set to E?
    If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
    The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems...

  • Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

    What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

    You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • Error at configuring LDAP Synch by using post installation steps of OIM

    Hi All ,
    I am getting error while configuring LDAP synch.......
    i am doing LDAP synch by using following link http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357
    While Running patch_weblogic.sh script i am getting following error
    Error:
    patch:
    explode-archived-apps-was:
    seed-ootb-jobs:
    seed-ootb-jobs:
    [echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
    [java] Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.xa.client.OracleXADataSource
    BUILD FAILED
    /apps/Oracle/Middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:21: The following error occurred while executing this line:
    /apps/Oracle/Middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:84: The following error occurred while executing this line:
    /apps/Oracle/Middleware/Oracle_IDM1/server/seed_data/seed-rcu-data.xml:37: Java returned: 1
    Total time: 26 seconds
    *********I can't trouble shoot this error.....because i am not able to find out oracle.iam.scheduler.seed.SeedSchedulerData class is in which jar.
    Please help me to solve this problem
    Regards,
    idmr2

    Open weblogic.profile and change the value for property operationsDB.driver to oracle.jdbc.OracleDriver and retest the issue.

  • Error while configuring work repository details in topology Manager

    Hi,
    Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
    When i try to do so, am getting the below error while configuring the work repository details in topology manager.
    “A work repository already exists for this connection.
    Enter the repository password to declare it in your Master Repository”
    I tried with both the new master and work repository password. But no luck.
    Previous Master & work details:
    Master: PCS_MASTER
    Work:PCS_WORKREP
    New Details
    Master: PCS_MASTER_INT
    Work:PCS_WORKREP_INT
    Instance: PCBID
    Am trying to create new master repository for PCS_MASTER_INT.

    In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
    If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema..

  • Error while configuring Vintella SSO

    Hi,
    I'm trying to implement SSO with Vintela in BO XI3.1 SP3
    AD Authentication is working corectly.
    I'm getting the following error after configuring Vintela, the error shows when trying to login:
    "HTTP Status 500 - com.wedgetail.idm.sso.ProtocolException: com.wedgetail.idm.spnego.server.SpnegoException: GSSException: Failure unspecified at GSS-API level (Mechanism level: com.dstc.security.kerberos.KerberosException: Successfully matched service principal "HTTP/SERVER" but not key type (23) + KVNO (143) in this entry: Principal: HTTP/SERVER Type: 1 TimeStamp: Wed Dec 31 18:00:00 CST 1969 KVNO: -1 Key: 3, ad c1 7f df e3 61 9e 9e )"
    I have also tried to use :
    -Dcom.wedgetail.idm.sso.password=Password in the Java configuration, (commenting the keytab entry on Web.xml) but when I comment the idm.keytab in the web.xml, I can't even reach the Infoview login page, It shows a 404 error
    Any help will be appreciated
    Thanks,
    Akhil

    Hi Michelle
    I have changed the Client in Java from 000 to 001. I have added the certificate to ACL in 001 in my ABAP system. After doing that, I am getting the following error message.
    N  Comparing certificates ...N  *** ERROR => ASN.1 blob lengths are not identical. 575 769. [ssoxxkrn.c   2074]
    Leaving VerifyOwnSystemInfo...
    N  HMskiVerifyOwnSystemInfo failed with rc=19.
    N  *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c   1067]
    N  dy_signi_ext: issuer not trusted
    M  *** ERROR => SosIAnchorArrayCreatable: T42/M0 in state cancel [thxxtool2.c  947]
    My TWPSSO2ACL Entries Client 001.
    ============================
    MANDT WPS_SYSID WPS_MANDT
    001                 BWD       001
    The Production client in ABAP is 100 and not 001. when I have changed the Clinet 100 in Java, then also I am getting the error message mentioned in my main question.
    So I am confused as to where I can make the changes in the system. Please advise!!!!!!!!!!

  • Error while configuring Enterprise manager

    Hello,
    I want to configure enterprise manager, while creating a new database using database configuration assistant in oracle 11g i am getting following error message
    *"Configuring database with database control requires a listener to be configured in the current oracle home.
    You need to run Netca to configure a listener before you can procede. Otherwise you may choose o continue with out Database control configuration"*
    My OS is Windows 7
    is there any other way to configure Enterprise manager OR do i need to install any specific package
    Thank you friends.

    Hi, Finally i created a listener "KUMAR"
    *Microsoft Windows [Version 6.1.7600]*
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Users\praveen kumar gogula>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 22-SEP-2011 17:50
    *:44*
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias                     KUMAR
    Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date                22-SEP-2011 17:44:58
    Uptime                    0 days 0 hr. 5 min. 48 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
    er.ora
    Listener Log File         c:\oracle\diag\tnslsnr\praveenkumarg\kumar\alert\log.x
    ml
    Listening Endpoints Summary...
    *(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=praveenkumarg)(PORT=1521)))*
    *(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))*
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "praveen" has 1 instance(s).
    Instance "praveen", status READY, has 1 handler(s) for this service...
    Service "praveenXDB" has 1 instance(s).
    Instance "praveen", status READY, has 1 handler(s) for this service...
    The command completed successfully
    C:\Users\praveen kumar gogula>
    What to do next?

  • Error while  configuring CAF

    Hi,
    While installing Solution Manager SR2 on AIX 5.3, Oracle 10.2., we are facing a problem in phase 41 ( Configure CAF) , the log says that
    INFO 2007-09-07 12:44:50
    Output of /usr/java14_64/bin/java -classpath /usr/sap/SOL/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ -Xj9 com.sap.ctc.util.ConfigMainExt XXXXXX test:50000 J2EE_ADMIN XXXXXX is written to the logfile java.log.
    INFO 2007-09-07 12:44:55
    Execution of the command "/usr/java14_64/bin/java -classpath /usr/sap/SOL/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ -Xj9 com.sap.ctc.util.ConfigMainExt XXXXXX test:50000 J2EE_ADMIN XXXXXX" finished with return code 0. Output: Returning NULLConfigMainExtTYPE=A<BR>STATE=500<BR>INFO_SHORT=Error connecting to http://test:50000/ctc/ConfigServlet?param=com.sap.ctc.util.OfflineConfig;PROPSHEETVALUE;CONFIGURATION=apps/sap.com/cafruntimeear/appcfg/application.global.properties,KEY=CAF_BW_DATASOURCE_NAME_PREFIX,VALUE=<E01>. The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
    ERROR 2007-09-07 12:44:55
    CJS-30059  Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
    ERROR 2007-09-07 12:44:55
    FCO-00011  The step configCAFPropSheet with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAFPropSheet was executed with status ERROR .
    When we checked the user status for "J2EE_Admin" user ,it was locked, we unlocked it and tried , but it gave the same error.
    Kindly help us out...
    points will be awarded.
    Regards,
    S.S

    The solution is mentioned in this thread:
    Error on External Serrvice Configuration Page NW 20047s SP10
    re-create your configuration if possible and see whether that fixes it

Maybe you are looking for

  • Can you use iPhone ear buds microphone with your MacBook Air?

    If you use your ear buds to listen to your Facetime conversations, are also using the microphone on them to talk?

  • Aperture 3 and HDV Camcorder

    I've been messing around with Aperture 3 for a while now and decided it was time to try playing with the new HD video support. On Apple's Aperture "New Features" page http://www.apple.com/aperture/features/#video it states: "Video Support Import, bro

  • Workflow - Notification to a Position in Org Unit

    Hi, I have a requirement to Send a Notification to an authorized person in the ORG Unit.This Task is a background task which uses the BO SELFITEM and Method SENDTASKDESCRIPTION. I can send the notification by passing a value thru address strings.How

  • Free Trial help

    I downloaded Adobe for the free trial but it doesn't seem fully functional.  I can't convert any PDF to Word.  What am I missing? 

  • Photoshop Color correction and Special color Effects

    Can anybody pls tell me , how they create color corrections in movies like Harry Potter, Lord of the Rings. and all the other special color themes they create different images... I use photoshop a lot but m a amateur to color correction thing .