Error in configuration of UWL

Hi all
i have an error in confugaration of UWL for Travel Request, my sap version is 5.0 and my portal version is 6.0,
i created system alias, and the test connections were working fine, and we created RFC destination by name<system alias>$<webflow connecter> and the backend RFc test connections also working fine. and created the user cald sapjsf, and assigned  the role sap_BC_UWL_admin, at last we restarted. but alos it not getting effected. i dont knw where was the connection wrong, tell me step by step
Thanks
jagan

Hi,
Successful message is good!   And for the SAME exact user in the backend inbox (access the R/3 backend that you are connecting the UWL to) how many workflows are in the backend inbox for the same user in SBWP?
If there are no workflows for the same user, try kicking some off then accessing the UWL.
You can also attach the latest default trace here to the message and I can see then if we can find out where this is going wrong for you.
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

Similar Messages

  • Getting a Error when Configuring UWL  in QAS Portal

    Hi Experts,
    When I Configuring  the UWL in System Admin-->Syetem Configuring -->UWL Administrator with the Administrator User I am getting the Error
    System SAP_SRM: Tue Feb 08 20:06:17 NZDT 2011
    : No User mapping set up for user USER.PRIVATE_DATASOURCE.un:Administrator system :SAP_SRM
    When I Configuring the same from User who have in the backend I am getting the error.
    System SAP_SRM: Tue Feb 08 20:05:54 NZDT 2011
    (Connector) :com.sap.portal.connectivity.destinations.PortalDestinationsServiceException:User is missing credentials for connecting to alias SAP_SRM. Contact your system administrator.
    Can anyone help me in this issue.

    hi,
    -This kind of issue that you are facing looks like a known issue when
    setting up the UWL connection to the backend, so we suggest you to
    ensure that you followed the steps from SAP Note #1133821 and
    that the username specified on step 7 is valid and  has the requested
    role assined?
    1. Open the Visual Administrator.
    2. Navigate to the Cluster -> <INSTANCE ID> -> Server<SERVER NAME> ->
    Services -> Destinations.
    3. Double click on Destinations node.
    4. Under Destinations select RFC node.
    5. Click on "New" button.
    6. In the "Enter destination name:" input dialog give as destination
    name the following: <SYSTEM ALIAS>$<UWL CONNECTOR TYPE>
    (e.g.:  BXTCLNT100$WebFlowConnector )
    (7. Fill in the following fields: System ID, Message Server, Logon
    Group,Language, Client, Username, Password. The other fields remain
    default. (Make sure the user you specify has "SAP_BC_UWL_SERVICE" role
    assigned. This is needed to fetch the technical informations from the
    backend.)
    8. Click on the "Save and Test" button
    9. "Successfully connected to system <SYSTEM ID> as user<Username>" info
    dialog has to appear.
    10. In other cases check the settings again and check the connection to
    the backend system.
    Hope that those info have helped you to solve the issue,
    Would you kindly confirm this message giving us your valuable feedback?
    It's important and help us to improve the service.
    Thanks a lot for your cooperation, it really made the difference.
    Please remember to evaluate the replays, this incentive the SDN to keep growing,
    regards,
    Fabio

  • Configuration of UWL with Abap webdynpro

    Hi,
    We are doing configuration of UWL with Abap webdynpro. Our purpose to launch Abap webdynpro application , once clicked to a worlitem in UWL iView. we are unable to do due to following errors.
    We have done in this way.
    1.Created ECC system in EP
    2.register the uwl.webflow
    3.create ABAP iview(for test purpose still getting error when preview) (N/A)
    4.clear cache
    4.import xml file
    <ItemType name="uwl.task.webflow.TS91000006.UWLECCCLNT530" connector="WebFlowConnector" defaultView="urliview" defaultAction="viewDetail" executionMode="pessimistic">
          <ItemTypeCriteria systemId="UWLECCCLNT530" externalType="TS91000006" connector="WebFlowConnector" />
          <Actions>
            <Action name="launchWebDynProABAP" handler="SAPWebDynproABAPLauncher">
              <Properties>
                <Property name="WebDynproApplication" value="em_wipm_app" />
                <Property name="WebDynproNamespace" value="kgo" />
                <Property name="System" value="UWLECCCLNT530" />
                <Property name="DynamicParameter" value="WI_ID=${item.externalId}" />
             <Property name="display_order_priority" value="5" />
              </Properties>
              <Descriptions default="" />
            </Action>
          </Actions>
        </ItemType>
    5.Getting error,when I click task to perform dynpro abap screen.
    6.WI_ID not been received.
    Plz let me know the solution.
    Thanks,

    Hello,
    I think you have to import the xml-file before clearing the cache again. Your new xml-file needs a higher priority then the default view.
    You have just defined a new ItemType in your new xml-file. I am not sure, but I think that you will have to define in this file also a new view for this ItemType. Because otherwise it is not defined how this new ItemType should be shown.
    Regards,
    Iris

  • Error in Configuration of OID

    Dear All,
    I have an error when i install infrastructure, as when finishing the installation and start the configuration assist, i'm always get error in configuring of Oracle Internet Directory and the error that appears below said that the object is already exist and the OID server could not started and the code was LPAD:error code 68.
    can pleas any one assist?
    Thanks

    Hi,
    Successful message is good!   And for the SAME exact user in the backend inbox (access the R/3 backend that you are connecting the UWL to) how many workflows are in the backend inbox for the same user in SBWP?
    If there are no workflows for the same user, try kicking some off then accessing the UWL.
    You can also attach the latest default trace here to the message and I can see then if we can find out where this is going wrong for you.
    Beth Maben
    EP - Senior Support Consultant
    AGS Primary Support, Business Suite & Technology
    Please see the UWL Wiki @
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

  • Error reading configuration file

    I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
    [] 2012-12-20 22:46:32,176 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
    [] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
    com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
              at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
              at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
              at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
    Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
              ... 7 more
    Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
              ... 9 more
    I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
    Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
    Any ideas of why the Validator.bat can't read the configuration file?

    I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
    I have my license server setup (its the Protected Streaming version).
    I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
    I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
    I am using the local key mode to remove one more variable (I have setup a remote key server as well).
    I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
    When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
    DRM error Major[3363] minor:[0] NSError:(null)]
    From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
    I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
    Colour me frustrated

  • I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
    Thanks in advance.

    u87 wrote:
    Thanks for the reply.  This at least tells me that going back to LV2010 is not likely to solve the problem.  The missing dll's are:
    MFC90D.dll
    MSVCR90D.dll
    IESHMS.dll
    WER.dll
    And, once again, IESHMS and WER have other dependencies.  So perhaps i need to install the Visual C++ development environment.
    IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
    WER.dll is Windows error reporting for Vista/Win7.
    MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
    So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
    What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • One of my dll's in my vi doesn't run with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3"  So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    Thanks in advance.

    Hm,
    it seems that you might have more success in the LabVIEW forum here; this one is for LabWindows/CVI...

  • Error 1070023 Configured Disk volume does not exist.

    Hi
    I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
    Error 1002097 Unable to load database Basic.
    The App log showed the following error
    Error 1070023 Configured Disk volume does not exist.
    Please help..

    So everything works when the volume is set to E?
    If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
    The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems...

  • Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

    What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

    You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • Error at configuring LDAP Synch by using post installation steps of OIM

    Hi All ,
    I am getting error while configuring LDAP synch.......
    i am doing LDAP synch by using following link http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357
    While Running patch_weblogic.sh script i am getting following error
    Error:
    patch:
    explode-archived-apps-was:
    seed-ootb-jobs:
    seed-ootb-jobs:
    [echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
    [java] Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.xa.client.OracleXADataSource
    BUILD FAILED
    /apps/Oracle/Middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:21: The following error occurred while executing this line:
    /apps/Oracle/Middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:84: The following error occurred while executing this line:
    /apps/Oracle/Middleware/Oracle_IDM1/server/seed_data/seed-rcu-data.xml:37: Java returned: 1
    Total time: 26 seconds
    *********I can't trouble shoot this error.....because i am not able to find out oracle.iam.scheduler.seed.SeedSchedulerData class is in which jar.
    Please help me to solve this problem
    Regards,
    idmr2

    Open weblogic.profile and change the value for property operationsDB.driver to oracle.jdbc.OracleDriver and retest the issue.

  • Error while configuring work repository details in topology Manager

    Hi,
    Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
    When i try to do so, am getting the below error while configuring the work repository details in topology manager.
    “A work repository already exists for this connection.
    Enter the repository password to declare it in your Master Repository”
    I tried with both the new master and work repository password. But no luck.
    Previous Master & work details:
    Master: PCS_MASTER
    Work:PCS_WORKREP
    New Details
    Master: PCS_MASTER_INT
    Work:PCS_WORKREP_INT
    Instance: PCBID
    Am trying to create new master repository for PCS_MASTER_INT.

    In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
    If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema..

  • Error while configuring Vintella SSO

    Hi,
    I'm trying to implement SSO with Vintela in BO XI3.1 SP3
    AD Authentication is working corectly.
    I'm getting the following error after configuring Vintela, the error shows when trying to login:
    "HTTP Status 500 - com.wedgetail.idm.sso.ProtocolException: com.wedgetail.idm.spnego.server.SpnegoException: GSSException: Failure unspecified at GSS-API level (Mechanism level: com.dstc.security.kerberos.KerberosException: Successfully matched service principal "HTTP/SERVER" but not key type (23) + KVNO (143) in this entry: Principal: HTTP/SERVER Type: 1 TimeStamp: Wed Dec 31 18:00:00 CST 1969 KVNO: -1 Key: 3, ad c1 7f df e3 61 9e 9e )"
    I have also tried to use :
    -Dcom.wedgetail.idm.sso.password=Password in the Java configuration, (commenting the keytab entry on Web.xml) but when I comment the idm.keytab in the web.xml, I can't even reach the Infoview login page, It shows a 404 error
    Any help will be appreciated
    Thanks,
    Akhil

    Hi Michelle
    I have changed the Client in Java from 000 to 001. I have added the certificate to ACL in 001 in my ABAP system. After doing that, I am getting the following error message.
    N  Comparing certificates ...N  *** ERROR => ASN.1 blob lengths are not identical. 575 769. [ssoxxkrn.c   2074]
    Leaving VerifyOwnSystemInfo...
    N  HMskiVerifyOwnSystemInfo failed with rc=19.
    N  *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c   1067]
    N  dy_signi_ext: issuer not trusted
    M  *** ERROR => SosIAnchorArrayCreatable: T42/M0 in state cancel [thxxtool2.c  947]
    My TWPSSO2ACL Entries Client 001.
    ============================
    MANDT WPS_SYSID WPS_MANDT
    001                 BWD       001
    The Production client in ABAP is 100 and not 001. when I have changed the Clinet 100 in Java, then also I am getting the error message mentioned in my main question.
    So I am confused as to where I can make the changes in the system. Please advise!!!!!!!!!!

  • Error while configuring Enterprise manager

    Hello,
    I want to configure enterprise manager, while creating a new database using database configuration assistant in oracle 11g i am getting following error message
    *"Configuring database with database control requires a listener to be configured in the current oracle home.
    You need to run Netca to configure a listener before you can procede. Otherwise you may choose o continue with out Database control configuration"*
    My OS is Windows 7
    is there any other way to configure Enterprise manager OR do i need to install any specific package
    Thank you friends.

    Hi, Finally i created a listener "KUMAR"
    *Microsoft Windows [Version 6.1.7600]*
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Users\praveen kumar gogula>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 22-SEP-2011 17:50
    *:44*
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias                     KUMAR
    Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date                22-SEP-2011 17:44:58
    Uptime                    0 days 0 hr. 5 min. 48 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
    er.ora
    Listener Log File         c:\oracle\diag\tnslsnr\praveenkumarg\kumar\alert\log.x
    ml
    Listening Endpoints Summary...
    *(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=praveenkumarg)(PORT=1521)))*
    *(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))*
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "praveen" has 1 instance(s).
    Instance "praveen", status READY, has 1 handler(s) for this service...
    Service "praveenXDB" has 1 instance(s).
    Instance "praveen", status READY, has 1 handler(s) for this service...
    The command completed successfully
    C:\Users\praveen kumar gogula>
    What to do next?

  • Error while  configuring CAF

    Hi,
    While installing Solution Manager SR2 on AIX 5.3, Oracle 10.2., we are facing a problem in phase 41 ( Configure CAF) , the log says that
    INFO 2007-09-07 12:44:50
    Output of /usr/java14_64/bin/java -classpath /usr/sap/SOL/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ -Xj9 com.sap.ctc.util.ConfigMainExt XXXXXX test:50000 J2EE_ADMIN XXXXXX is written to the logfile java.log.
    INFO 2007-09-07 12:44:55
    Execution of the command "/usr/java14_64/bin/java -classpath /usr/sap/SOL/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ -Xj9 com.sap.ctc.util.ConfigMainExt XXXXXX test:50000 J2EE_ADMIN XXXXXX" finished with return code 0. Output: Returning NULLConfigMainExtTYPE=A<BR>STATE=500<BR>INFO_SHORT=Error connecting to http://test:50000/ctc/ConfigServlet?param=com.sap.ctc.util.OfflineConfig;PROPSHEETVALUE;CONFIGURATION=apps/sap.com/cafruntimeear/appcfg/application.global.properties,KEY=CAF_BW_DATASOURCE_NAME_PREFIX,VALUE=<E01>. The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
    ERROR 2007-09-07 12:44:55
    CJS-30059  Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
    ERROR 2007-09-07 12:44:55
    FCO-00011  The step configCAFPropSheet with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAFPropSheet was executed with status ERROR .
    When we checked the user status for "J2EE_Admin" user ,it was locked, we unlocked it and tried , but it gave the same error.
    Kindly help us out...
    points will be awarded.
    Regards,
    S.S

    The solution is mentioned in this thread:
    Error on External Serrvice Configuration Page NW 20047s SP10
    re-create your configuration if possible and see whether that fixes it

Maybe you are looking for