Error in Configuration Scenario
I am testing a File to File demo scenario. While genearation of the log file I am getting error stating
"Error whille creating collaboration objects in configuration scenario..". Can somone help me out.
venkat
this could be possibly due to may be u have missed somthing in creating the collaborative process, sender sgreement,receiver agreement.
Also see :
/people/vera.gutbrod/blog/2006/12/04/what-you-need-to-know-about-the-new-forums-in-sap-netweaver-portal
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
Pls : Reward points if helpful
Vishal
Similar Messages
-
Error while importing Configuration Scenario
Hi guys
When I try to import a Configuration Scenario from DEV to QAS, I get the following error.
CC_xxxxxx is already locked in change list Standard Change List by user xyz Activate or reject the change to object Communication Channel: * | ERQ_BS | CC_xxxxxx and restart the import
I went to the Lock Overview from Administration, of both DEV and QAS and I don't see any objects locked under that particular user. Why do I get this error ?
I removed that particular CC from the Configuration Scenario and imported again. I still get the same error and this time, it pointed out to another CC in my Configuration Scenario.
RegardsThanks Shabarish,
It worked and thanks to everyone who helped me.
I went to the " Change List" tab in QAS, I got this error in QAS, and assigned all the open items in the above user id to my userid and opted Reject changes. Then I imported again and it worked.
Regards -
Getting Error in I.D while Importing a Configuration Scenario
Hi ,
I'm traying to import a Configuration scenario . after choosen the scenario from teh Imported Objects it was giving the Error message java.lang.NullPointerException .
Any specific reason is there for this or can any body suggest me the solution.
Regards
JainHi Swarup & Sandeep,
Previously i had imported a Configuration Scenario that was imported successfully .recently we deployed some .sda file for JDBC drivers for connecting legacy systems. and after that now I'm unable to Import any scenarios
Please suggest me .
Regards
Jain -
Reg:: Java Lang ERROR in File_2_RFC_File Scenario
Hi! Gurus,
I am doing File to RFC to File without BPM by using this below Blog..
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file-rfc-file%28without+bpm%29&
I have seen your blog and its quite intersting and pretty. I tried your blog in the below mentioned Server.
PI 7.1 Server Make
Release NW07_06_REL
SPS Number 06
JDK Version jdk15
Build Time 2009-02-09 18:57
Kindly make a note the below mentioned points and please let me know where exactly I was strucked...
1. I sucessfully configured the below steps and I am able to retrieve the response from the RFC and I am able to see Success Flags in MONI on the both 2 messages. I configured like this..
IR::
Data Types and Message Types :: File Outbound and File Inbound.
Service Interface:: SI_FIle_Handling ( Outbound Synchronous which contains file Outbound service request File Inbound as Response message types )
Message Mappings:: 1. File Req to RFC req
2. RFC resp to File Resp
Interface Mappings:: 1 IM_FILE_RFC_FILE
ID::
*Configuration Scenario *, Business service one which cotnains 2 communiation channels (file sener and receiver) and Business System which contains RFC receiver channel.
Colloboration Agreemetns::
One Sender Agreement and one Receiver Agreement
Logical Routingsa::
One Interface determination and One Receiver Determination
Testing::
I am sending an XML message which contains EMP ID number as request tio RFC in MONI I am able to get EMP details also in the second message in Moni as response from R3 system
ISSUES::
1> Even though I have kept as delete mode in file sener the file is not getting deleting from FTP sender location and scenario is running continously polling and messages are coming cont in MONI
2) Even though I am able to see the response in MONI but I am not able to receive the Output file to the FTP Receiver location
3) In communication Channel I am getting these errors::
Audit Log for Message: a52a7bc0-11f8-11de-97cb-001d090e4bbe
Time Stamp Type Description
*_Error: java.lang.NullPointerException_*
2009-03-16 12:34:08 Information MP: entering1
2009-03-16 12:34:08 Information MP: processing local module localejbs/CallSapAdapter
2009-03-16 12:34:08 Information File Adapter Receiver processing started, required QoS ExactlyOnce
2009-03-16 12:34:08 Error MP: exception caught with cause java.lang.NullPointerException
2009-03-16 12:34:08 Error ROB: error during processing: com.sap.aii.af.lib.mp.module.ModuleException
Kindly resolve this issues and do the needful to me.
Regards::
Amar Srinivas EliHi! Praveen,
I cross checked from the past 2 days and finally I raised this forum. I dono where exactly I was strucked hence please guide me more in this issue.
Hi! Shabarish,
SP 06 in PI is SP 15 in XI
The modules required to work without BPM is available only from SP 19 on XI 3.0 and SP 10 on PI 7.0.
See I already given my adminstraction information I am not working on PI 7.0 I am working on PI 7.1 Release NW07_06_REL
SPS Number 06
kindly please check this and let me know few more sugestions on this issue.
Regards::
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Mar 16, 2009 3:57 PM -
Problem when creating configuration Scenario
hi all
when i Create configuration Scenario use sap XI then it warning that "Error initializing key service (COULD_NOT_GET_KEYSERVICE)" and "The log file for database 'N4S' is full. Back up the transaction log for the database to free up some log space."
is it means so many people to use the system?
and how can i clear this problem?
thanks!
marxHi
User query below to backup and shrink the trasactional logs
db_name in your case is "N4S"
db_name_log is the trasctional log file name:Chek this in your case must be like N4S_log
backup log db_name with truncate_only
go
dbcc shrinkfile (db_name_log,0)
go
run this query and restart the database
Ps: If helful pleae reward points -
PI 7.11 Configuration Scenario Tables
Hi everbody,
regarding "Configuration Scenario", does anybody know in which database the information of the tree view in the Integration Directory is stored?
Thanks in advance
HartmutHi,
You can refer the foll link for java stack tables :
http://wiki.sdn.sap.com/wiki/display/XI/XI+Tables
Regards -
Error reading configuration file
I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
[] 2012-12-20 22:46:32,176 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
[] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
... 7 more
Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
... 9 more
I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
Any ideas of why the Validator.bat can't read the configuration file?I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
I have my license server setup (its the Protected Streaming version).
I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
I am using the local key mode to remove one more variable (I have setup a remote key server as well).
I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
DRM error Major[3363] minor:[0] NSError:(null)]
From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
Colour me frustrated -
I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
One of my dll's in my vi doesn't run with the error "application configuration is incorrect"
I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
Thanks in advance.Hm,
it seems that you might have more success in the LabVIEW forum here; this one is for LabWindows/CVI... -
Error 1070023 Configured Disk volume does not exist.
Hi
I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
Error 1002097 Unable to load database Basic.
The App log showed the following error
Error 1070023 Configured Disk volume does not exist.
Please help..So everything works when the volume is set to E?
If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems... -
What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear
You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.
-
Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace: at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace: at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====Have you installed AppController on the same machine with VMM?
-
Error at configuring LDAP Synch by using post installation steps of OIM
Hi All ,
I am getting error while configuring LDAP synch.......
i am doing LDAP synch by using following link http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357
While Running patch_weblogic.sh script i am getting following error
Error:
patch:
explode-archived-apps-was:
seed-ootb-jobs:
seed-ootb-jobs:
[echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
[java] Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.xa.client.OracleXADataSource
BUILD FAILED
/apps/Oracle/Middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:21: The following error occurred while executing this line:
/apps/Oracle/Middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:84: The following error occurred while executing this line:
/apps/Oracle/Middleware/Oracle_IDM1/server/seed_data/seed-rcu-data.xml:37: Java returned: 1
Total time: 26 seconds
*********I can't trouble shoot this error.....because i am not able to find out oracle.iam.scheduler.seed.SeedSchedulerData class is in which jar.
Please help me to solve this problem
Regards,
idmr2Open weblogic.profile and change the value for property operationsDB.driver to oracle.jdbc.OracleDriver and retest the issue.
-
Error while configuring work repository details in topology Manager
Hi,
Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
When i try to do so, am getting the below error while configuring the work repository details in topology manager.
“A work repository already exists for this connection.
Enter the repository password to declare it in your Master Repository”
I tried with both the new master and work repository password. But no luck.
Previous Master & work details:
Master: PCS_MASTER
Work:PCS_WORKREP
New Details
Master: PCS_MASTER_INT
Work:PCS_WORKREP_INT
Instance: PCBID
Am trying to create new master repository for PCS_MASTER_INT.In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema.. -
Error while configuring Vintella SSO
Hi,
I'm trying to implement SSO with Vintela in BO XI3.1 SP3
AD Authentication is working corectly.
I'm getting the following error after configuring Vintela, the error shows when trying to login:
"HTTP Status 500 - com.wedgetail.idm.sso.ProtocolException: com.wedgetail.idm.spnego.server.SpnegoException: GSSException: Failure unspecified at GSS-API level (Mechanism level: com.dstc.security.kerberos.KerberosException: Successfully matched service principal "HTTP/SERVER" but not key type (23) + KVNO (143) in this entry: Principal: HTTP/SERVER Type: 1 TimeStamp: Wed Dec 31 18:00:00 CST 1969 KVNO: -1 Key: 3, ad c1 7f df e3 61 9e 9e )"
I have also tried to use :
-Dcom.wedgetail.idm.sso.password=Password in the Java configuration, (commenting the keytab entry on Web.xml) but when I comment the idm.keytab in the web.xml, I can't even reach the Infoview login page, It shows a 404 error
Any help will be appreciated
Thanks,
AkhilHi Michelle
I have changed the Client in Java from 000 to 001. I have added the certificate to ACL in 001 in my ABAP system. After doing that, I am getting the following error message.
N Comparing certificates ...N *** ERROR => ASN.1 blob lengths are not identical. 575 769. [ssoxxkrn.c 2074]
Leaving VerifyOwnSystemInfo...
N HMskiVerifyOwnSystemInfo failed with rc=19.
N *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c 1067]
N dy_signi_ext: issuer not trusted
M *** ERROR => SosIAnchorArrayCreatable: T42/M0 in state cancel [thxxtool2.c 947]
My TWPSSO2ACL Entries Client 001.
============================
MANDT WPS_SYSID WPS_MANDT
001 BWD 001
The Production client in ABAP is 100 and not 001. when I have changed the Clinet 100 in Java, then also I am getting the error message mentioned in my main question.
So I am confused as to where I can make the changes in the system. Please advise!!!!!!!!!!
Maybe you are looking for
-
I just installed Creative Cloud in order to download a trial for InDesign. I have the app icon for CC, but it won't open. When it was in my toolbar (on a mac) it just sat there loading for about 15 minutes. I tried restarting it but it won't open at
-
Changing Permissions Crashes Finder in Leopard
I have found an issue when trying to add permissions to a folder moved from an admin account to a standard account. I created a fresh installation of my computer and installed OSX 10.5 Leopard. I then used my initial Account "Administrator" to copy m
-
how can you rotate the view of a document in adobe reader for windows 8 touch screen?
-
Running InDesign CS 3 on Mac OS 10.6.4 snow leopard
Will it work OK to run InDesign CS 3 (and Adobe Design Suite) AND CS 5 on the same 17 inch MacBook Pro running OS 10.6.4? Will it work OK to run BOTH InDesign CS 3 AND CS 5 on the same computer running OS 10.6.4? Thank you.
-
Cant move files from previous saved CD to desktop or anyplace else
Help -- I cant move files from previous saved CD to desktop or anyplace else I don't know when this started but it was two days ago I noticed this. I have changed all the permissions in info to allow me to have read write access to all my hardrives(2