Error in "Configure the Role of the Integration Service",pls,help me :-(

Hi Guru:
When i run the Template Installer,I got the following error in the step 19:"Configure the Role of the Integration Service"
===================================================
Element 'SXMB_SET_ROLE_TO_IS':ONLY_ONE_CENTRAL_XMB
Element 'SAPDEMO.E01.Backend.Unclassified':!AbapConfigurationWriter.FM_CALL!SXMB_SET_ROLE_TO_IS!AbapConfigurationWriter.FAILED!
===================================================
What can i do whit this error?are there anyone who encountered this problem so far?
Best regards
alex zhang

Hi,
Are you installing temp. Installer with Admin user id, make sure this user should have all necessary roles for installations. Check and try to login in SDM.
THanks
Amit lal
Reward points if answer suits your requirement.

Similar Messages

Error CIM_ERR_FAILED - Configure the integration server for sld

Hi,
I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Someone help me?
Regards,

The version is 7.0. I skip this step and finished with sucess. No run the step:
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Cancelled
PI_01_This template checks if the necessary services are started Cancelled
PI_05_This wizard will configure the integration server for sld Incompletely executed
These steps are with the same error.
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

Error while opening the database.--urgent---pls help...

Hi,
Got the below error while opening the database.
Database version is :10.1.0.4.0
database is in noarchive log mode.
the database is coming in to no-mount state and mount state quite easily but not able to open the database.
Got the below error while opening the database.
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:39 2008
Errors in file /xxx/udump/aaa_ora_18737.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:41 2008
DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
Doing block recovery for file 2 block 9483
No block recovery was needed.
on Sep 29 15:34:01 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:34:04 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
PMON: terminating instance due to error 472
Instance terminated by PMON, pid = 18723
Please help me....................

Hi..
This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
Anand

Error of "Configure the Role of the Integration Service"

Hi Guru:
When i run the Template Installer,I got the following error in the step 19:"Configure the Role of the Integration Service"
===================================================
Element 'SXMB_SET_ROLE_TO_IS':ONLY_ONE_CENTRAL_XMB
Element 'SAPDEMO.E01.Backend.Unclassified':!AbapConfigurationWriter.FM_CALL!SXMB_SET_ROLE_TO_IS!AbapConfigurationWriter.FAILED!
===================================================
What can i do whit this error?are there anyone who encountered this problem so far?
Best regards
alex zhang

Hello Alex,
To avoid problems while using the template installer please check prerequisites for post-installation in SAP documentation. That information can be found in SAP Help Portal (http://help.sap.com --> SAP Netweaver --> Installation and Upgrade guide --> Installation --> 2 - Installation - SAP Netweaver 2004s --> SAP NetWeaver 2004s Installation Documentation).
Select your Operating System and Database and look for 'Post-Installation Steps for Usage Type *' in the dedicated document.
Important: You cannot use the template installer after
Upgrade
Add-In installation (Exception: Configuration of Usage Type BI-Java can be
executed after Add-In Installation)
Additional usage type enablement
System copy
Check this Note it may help you :
Note 923359 - Collective Note: Template Installer (CTC)
regards
Prasad

Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-Jake

Hi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error occured in the integration checks(read log)

Hi,
I try to post planning of machinery hours in KP26, tht time i got this error, and data is not saved too. " error occured in the integration checks(read log)" kindly solve this problem asap.
Regards
PRINCE

Sir,
Where to maintain Nominal rate for this question KP26 ? give me a path or transaction code.
Regards
Prince

How to configure the Integration Server Settins?

Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
Mohan

Hi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV

Hyper-V encountered an error while Configuring the network on Vmachine

Hi all,
i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
Hyper-V encountered an error while configuring the network on Vmachine
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

Windows Server 201? Are you sure?
What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
Bill

Setup synchronize with address for Sage ACT! showed Runtime Error: Cannot configure the section.

Hello Blackberry Senbai...
As my problem showed as subject line. "When I setup synchronize with address book for Sage ACT! showed Runtime Error: Cannot configure the section."
Setup was stopped from this point.
my system info..
Desktop Manager version is 5.0 downloaded from Blackberry website.
ACT version is 2010.
OS: Window XP Pro with service pack 3
Thank you for your time to review my problem.

Hi and Welcome to the Forums!
Since the version of ACT that you state is not contained in the PIM compatibility matrix, I'm not sure that there is anything to be offerred...
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Errors occurred in the integration checks (read log)

Hello Everyone ,
I am working on cross companycode- cost accounting
In the previous screen i said i am not getting cost elements box in transaction code KP06 , anyhow i am entering the itemoverview screen using one cost element which i appearing automatically and in here i am allocating funds to various activity types( here aslo its showing just one cost element as in the main screen of KP06 there was any Box asking me to enter cost element) , so i am giving all activity types with cost element plan fixed cost(entering an amount of 2000for all activity types )
&plan variable cost (entering an amount of 1000 for all activity types) nothing in plan fixed cons & plan variable consum.....remember this is just for practice purpose i am taking these small figures.
Now when i am trying to save this its giving me error which is as follows:
Errors occurred in the integration checks (read log)
Message no. GP542
Diagnosis
The data entered or changed in this planning transaction should not only be updated in controlling, but also in the related applications (such as profit centers).
These applications check the data to be posted beforehand to guarantee that the update is performed without any problems.
However, errors or warnings occurred during this check.
System Response
Data is not updated.
Procedure
Look to see which errors occurred using the function "Error log...",. "Plan Integration...".
Can anyone please help me with this one .
Thanks ,
Mohammed samiuddin

Hi,
I am also getting the same error message when I am trying to post activity type rates using Tcode KP26.
Can you please let me know how you solved this issue?
Error message :
Errors occurred in the integration checks (read log)
Message no. GP542
Diagnosis
The data entered or changed in this planning transaction should not only be updated in controlling, but also in the related applications (such as profit centers).
These applications check the data to be posted beforehand to guarantee that the update is performed without any problems.
However, errors or warnings occurred during this check.
System Response
Data is not updated.
Procedure
Look to see which errors occurred using the function "Error log...",. "Plan Integration...".
Regards,
Vicki

Errors configuring the Web Service Runtime

Hi All, I'm trying to configure the Web Service Runtime using SRT_ADMIN on SAP Netweaver Trial 7.02.
I have almost everything working, except three things. I ran SRT_ADMIN_CHECK and i got the following messages:
Checking cross-system settings
bgRFC destination is operational
bgRFC supervisor destination is registered
WSRM event handler is active
Task watcher is active
Data collector for monitoring is not activated
ICF node is active. /sap/bc/srt/
ICF node is active. /sap/bc/srt/wsil
ICF node is active. /sap/bc/srt/wsdl
ICF node is active. /sap/bc/srt/esf_in
ICF node is active. /sap/bc/srt/xip
ICF node is active. /sap/bc/srt/rfc
ICF node does not exist. /sap/bc/srt/pm
ICF node is active. /sap/bc/srt/xip/sap
ICF node does not exist. /sap/bc/srt/scs
Some of the SRT ICF nodes are inactive or do not exist
Ending check of cross-system settings
I checked in SICF and these two services does not exist in the tree. These two unexsting services are a limitation of the trial version?. If not, then how can I create them, if so, what are the parameters? Can I download a note or a manual regarding these two services?. Also how can I activate the data collector?

Hi Mauro,
Please check SAP Note 1501709 for the missing nodes issue.
Regarding the Data Collector, I've never seen this activated anywhere before - without any repercussions. You could maybe try doing some research on a background job called SAP_SRT_COLLECTOR_FOR_MONITORING though.
Regards, Trevor

Hive_1074 the integration service failed to start hive session

i am using Informatica 9.6.1 BIG Data Edition developer tool.I am trying load data from hive to hive database table, I am able to import and view data from hive database, but when mapping run it got failed. Below error message captured at mapping log. Error: Exception Class: [com.informatica.sdk.dtm.ExecutionException] Exception Message: [[HIVE_1070] The Integration Service failed to run Hive query [exec0_query_1] for task [exec0] due to following error: Hive error code [1], Hive message [FAILED: Execution Error, return code 1 from org.apache.hadoop.hive.ql.exec.mr.MapRedTask], Hive SQL state [08S01].]. Could please any one reply for this issue. Thanks&regards,Sivaji

Hi all, i am new for informatica Big data edition(BDE). I am trying to load data into hive table, the mapping is running long time in informatica Developer tool. i am not able to understand why it is running long time.administrator service log shows error message as "hive_1074 the integration service failed to start hive session", Please look attached error message screenshot.Before this error message i got below error so i configured inormatica home directory at data integration service.[HIVE_1108] The Informatica home directory property [Informatica Home directory] for the Hadoop node is not configured.Configure the property for the Integration Service. Please help on current issue. Thanks in advance. Rgards,Sivaji

OS Error in starting the OCFS Service on windows server 2008

Hi,
Installing the Oracle 11g R1 CRS on windows server 2008 operating system . It is displaying the folllowing error message
ERROR : OS in Error in starting the OCFS Service
Can any one please tell what could be the issue ..
Thank You

Solved this after some trawling through xml configuration files on the server.
The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
<ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
changing this to:
<ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
and the OC4J container starts successfully.
Regards,
-Haakon-

Error while starting the shared service server

Hi john,
I am getting the following error while starting the shared service server.
*25 Jul 2009 10:26:39 - org.apache.slide.common.Domain - ERROR - Unable to migrate hub groups to css*
So shared service console is not starting.
Please tell me the solution for it.
Thanks
Edited by: user11358816 on Jul 24, 2009 10:06 PM
Edited by: user11358816 on Jul 24, 2009 10:09 PM

Hi John,
Yes,It was working earlier.
When I have added NTLM authentication for FDM I am getting that error,but instead of that if
I am adding the authentication provider as LDAP(CSS) I am not getting that error.
So finally i have added only one authentication provider and that is LDAP(CSS).
I fallowed ur document for integrating the FDM application with planning application.(http://john-goodwin.blogspot.com/2008/07/planning-v11-drill-back.html )
For the global logon information I have given admin and password , which I have given while adding the LDAP authentication (CSS).
I am getting machine profile missing error when i clicked on the dimension and the target dimension test box contain connection failed.
Can u suggest me where am I wrong?
Thanks
Edited by: user11358816 on Jul 26, 2009 9:42 PM

Error in "Configure the Role of the Integration Service",pls,help me :-(

Similar Messages

Maybe you are looking for