Error in configuring content server

Dear All
i am configuring external content server
I have defined my content repositories using tcode OAC0. parameters are as follows:
content repository : ZXYZ ( XYZ is my content repository)
Document Area : DMS
Storage type :HTTP content Server
Version no. : 0046
HTTP Server :IP address of content server
Port No : 1090
HTTP Script :ContentServer/ContentServer.dll
after that i saved.
now when i am clicking on Test connection i am getting Connect to Host Port 1090 error: NIECONN_REFUSED
Pls Let me know any solution you have.
Thanks
sandeep sharma

> now when i am clicking on Test connection i am getting Connect to Host Port 1090 error: NIECONN_REFUSED
This means that
- either the HTTP server on the target system is not running - or not listening on port 1090
- a firewall prevents accessing that port
Markus

Similar Messages

Error while configuring Content server

Hello,
I have installed a new CS on a server and trying to configure it from SAP system.
I have used all the Transaction like CSadmin, OAC0 and able to configure it but have some doubts and also facing some issues like:
1) How I can check if the CS configuration is fine and correct?
2) The status of contREp is not showing running rather is is showing " data(77%) log(0%)".
3) I have one other CS configured in SAP system , so will it make any difference? I hope it should not.
4) should i define the content server ip in the host file at OS system of SAP system's ?
Regards,
Bhavesh

Hello Ravindra,
Thanks for the update:
1) I have checked every thing and activate the services from CSADMIN but status is still the " data(77%) log(0%)" it is not turing to running.
2) i have defined the Post and Ip address in OAC0 . there are few other content servers are also configure in my SAP so that is not n issue.
but still i am not able to connect my new CS to SAP. status for the Cont repository in SCMSMO is not running and it shows some connection error like
" Connection to http://134.37.216.63:1090/ContentServer/ContentSer: Internal error"
I have seen the same error in SMICM as well .
can any one have any idea on this.
Regards,
Bhavesh

SQM uploader error while configuring BizTalk Server

Hi,
I am getting following error while configuring BizTalk Server 2013 on Windows Azure VM
Log Name: Application
Source: Application Error
Date: 8/26/2013 1:08:46 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: BizTalk2013VM
Description:
Faulting application name: SqmUploader.exe, version: 3.10.229.0, time stamp: 0x50fe35e2
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b8479b
Exception code: 0xe0434352
Fault offset: 0x0000000000009e5d
Faulting process id: 0x988
Faulting application start time: 0x01cea27eec7ba1b4
Faulting application path: C:\Program Files (x86)\Microsoft BizTalk Server 2013\CEIP\SqmUploader.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 2acf119c-0e72-11e3-9e61-00155d6120c3
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-26T17:08:46.000000000Z" />
<EventRecordID>32154</EventRecordID>
<Channel>Application</Channel>
<Computer>BizTalk2013VM</Computer>
<Security />
</System>
<EventData>
<Data>SqmUploader.exe</Data>
<Data>3.10.229.0</Data>
<Data>50fe35e2</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18015</Data>
<Data>50b8479b</Data>
<Data>e0434352</Data>
<Data>0000000000009e5d</Data>
<Data>988</Data>
<Data>01cea27eec7ba1b4</Data>
<Data>C:\Program Files (x86)\Microsoft BizTalk Server 2013\CEIP\SqmUploader.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>2acf119c-0e72-11e3-9e61-00155d6120c3</Data>
</EventData>
</Event>
Any help will be highly appreciated.

Hi Nilesh,
Following article should help you:
http://social.technet.microsoft.com/wiki/contents/articles/11426.windows-azure-biztalk-services-resources-on-the-technet-wiki.aspx
I hope this helps!!!!!!
Maheshkumar S. Tiwari|BizTalk Developer Interview Questions and Answers
http://tech-findings.blogspot.com/

Error when configuring Siebel Server in Windows server 2003

Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog     GenericError     1     000000024f58096c:0     2012-03-08 01:13:33     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃

Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson

How to configure Content server with Oracle Portal

I am working on oracle portal using JDeveloper 11.1.1.5.0. I need to configure Content server to work with UCM. Which content server version should i use and what basic steps required to configure it.
OS environment is Windows XP SP3.
Database server is Oracle 10gR2

Hi
"I need to configure Content server to work with UCM." - I am not clear on this .
UCM is content server .
Now if you are looking to have UCM contents rendered on Oracle Portal then you will need to use Content Portlet Suite .
Hope this helps .
Thanks
Srinath

Customise error page when content server is down

Hi all,
The following message is received when the content server is down:
Web Server Error Error attempting to perform request. (Unable to connect to address.) To administrate this server use this link.
I have seen a few variations fo this mesage on different conditions.
The question is: how can we customise this page?
Many thanks

hi all,
try this
You can set up the maintenance page when at the Web server level when the application is down in the App layer. Here is the reference for Oracle HTTP server, same you can do it for any other web server too..!!
You can achieve this by configuring an error page at the WebServer (part of web-tier).
For example, in the case of a Oracle HTTP Server (OHS), you could do the following:
1. Place your maintenance page at <ORACLE_INSTANCE>/config/OHS/<component_name>/htdocs.
For Example, <ORACLE_INSTANCE>/config/OHS/<component_name>/htdocs/errorPage500.html
2. Open the OHS httpd.conf located at <ORACLE_INSTANCE>/config/OHS/<component_name> in an editor and search for the string ‘ErrorDocument 403′ which can be seen as commented text. Next to the commented text line, add the below lines for configuring the Error
Pages (500 —> backend server unavailable, 403 —> forbidden request, 404 –> Resource Not available). For the below example, we had 3 html pages errorPage500.html, errorPage403.html and errorPage404.html are deployed in OHS htdocs.
ErrorDocument 500 /errorPage500.html
ErrorDocument 403 /errorPage403.html
ErrorDocument 404 /errorPage404.html
3. Save the changes to the httpd.conf file.
4. Restart OHS server

HTTP error: 500 (Internal Server Error) while creating content server repst

Hi All,
I am getting the HTTP error as mentioned below,
HTTP error: 500 (Internal Server Error)"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver
Manager] Data s
My content server is running on a Microsoft Cluster Environment.
I tried to follow the steps in the SAP note 301352.
Please help me in registering the LiveCache ODBC driver.
When i excute the the odbcreg.exe file i get the foll,
E:\sapdb\programs\pgm>odbcreg.exe
DriverName=MaxDB
Driver=e:\sapdb\programs\pgm\sqlod32.dll
Setup=e:\sapdb\programs\pgm\sqlsp32.dll
Version=7.6.0.0
Please help me in registering the Livecache ODBC driver.
Expecting your kind reply.
Vineeth

hi Vineeth Damodar
do it in command prompt.
change the drive letter ...where u install the sapdb.
D:\odbcreg LiveCache -i -p d:\sapdb\programs\pgm
it will prompt that LIvecache is registred. Restart the server.
then check in control panel...
The LiveCache ODBC driver should then be registered in the Control Panel -> ODBC Drivers -> Driver tab
-- Lee
rewared points .. if it helpful for u....

HTTP error 500 on Content Server test (RSCMST), after CS migration.

Hello all,
I have migrated a Content Server 6.30 system from HP-UX and MaxDB 7.3.00.42 to CS 6.40 on Windows and MaxDB 7.7.06.15. While the migration of the database and the install of the CS 6.40 seems to have completed successfully, I am having trouble connecting to it from the R/3 system.
Following some clean up steps suggested by SAP support, I am able to connect to the CS system using the "serverInfo" query, and I am also able to connect to the existing repository through CSADMIN. However, when I run the RSCMST tests, they all fail with the error: HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0".
Below is a summary of the tests/connections that work and the ones that do not.
URL for serverInfo: http://<hostname>:1090/ContentServer/ContentServer.dll?serverInfo - Returns successfully and displays status of CS.
CSADMIN - All tabs on csadmin display correct information, from the CS and respository.
SE38 - program=RSCMST - All tests return the following error: HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
I have also confirmed that I am using the most recent ODBC driver on this CS(at the request of SAP support), with the command sdbregview -l. - Returns the following: ... ODBC g:/sapdb/programs 7.7.06.15 64 bit valid ...
If anyone has any suggestions on what else I can check for this error, I would greatly appreciate it. Thanks in advance.
Regards,
Rusty Robbins

Well, I have good news to report... finally!
The main problem I had with the 500 error was caused by an incorrect version of MaxDB, for CS 6.40 (as SAP support pointed out in the message I had opened with them). Once I had completed the migration using MaxDB 7.6.06.05, I was able to connect successfully.
When I first performed this migration (with 7.6.06.05), I "thought" I was still getting the same 500 - internal error, but after looking at it closer I realized that the error had changed to say something like "table is set to read-only". I then realized that I had forgotten to perform a full data backup, following the last import. Once I completed this backup, I was able to connect to this CS system from R/3, with all of the test programs (RSCMST, etc).
Just to be sure, I performed this migration from scratch again, and was able to repeat the successful migration and tests. I have now turned it over to the functional teams for testing, and hopefully they will not find any issues. ;p
Thanks to all that responded and to those that reviewed this post!
Regards,
Rusty Robbins

Error connecting to Content Server

Hello,
we are in the process of upgrading ERP6.0 EHP5 to EHP6 which is also an upgrade to NW702 to NW731. We made a system copy of the productive system and called it XXX and did all the post-systemcopy works that need to be done including creating the System PSE. We connected this XXX system to the Content Server and created new respositories and send the certificates to the CS. Everything was working fine. This wall still on NW702
After the upgrade we get errors like:
When trying to read/save a file, this error comes up:
X-ErrorDescription: "Security SsfVerify failed rc=5, lasterror=1, This key
type is not supported, PSE=\\?\E:\Program Files\SAP\Content Server\Security
\<REPOSITORYNAME>.pse,"
When accessing the CSADMIN via OAC0, the password windows opens and at the bottom the Error "http 401 (unauthorized) Permission denied: adminContRep&configGet" occurs.
I tried sending the certificate again-> still error
I tried to delete the .certs and .pse files in ContentServer\security as suggested in note 1800664-> still error
There was an old note saying that the CS needs to be patched because secude.dll is too old but even the latest patch only has the secude.dll from 2009 and there is no update. (At least I couldn't find any, probably because it is sapcrypto now)
We are using CS Patch 17. Since everything was working before, I do not see the reason to deploy a new patch.
The system PSE was created with algorithm RSA with SHA-1 and 2048 byte.
Does anyone have an idea what to try next?
Regards
Andreas

Hi Andreas,
Have you registered content server port number 1090. check in services if not registered
Please follow below steps.
1.In 'Administrative Tools' open 'Windows Firewall with Advanced Security'
2.Right click over 'Inbound Rules' and select 'New Rule...'
3.In the Rule Wizard select 'Port' and click on 'Next'.
4.Enter the port number you set for the Content Server, the default port is 1090,
and click 'Next'.
5. Select 'Allow the connection' and click 'Next'.
6. Select the Profile for your network and click on 'Next'.
7. Enter the name of rule, e.g. 'Content Server' and click on 'Finish'
Hope that maintained host file also.
Regrads,
chandu.

Error starting/restarting content server

Hi,
I installed content server 10g on linux. I ran /etc/idcserver_start, and got the following error. Same error for running idcserver_restart. Any suggestions how I can fix the issue?
Exception in thread "main" java.lang.NoClassDefFoundError: intradoc/apps/useradmin/CustomSecurityRightsData
at customsecurityrights.CustomSecurityRightsFilter.doFilter(CustomSecurityRightsFilter.java:46)
at intradoc.shared.PluginFilters.filter(Unknown Source)
at intradoc.server.IdcExtendedLoader.executeFilter(Unknown Source)
at intradoc.server.IdcExtendedLoader.extraBeforeCacheLoadInit(Unknown Source)
at intradoc.server.IdcSystemLoader.loadCaches(Unknown Source)
at intradoc.server.IdcServerManager.init(Unknown Source)
at IdcServer.init(Unknown Source)
at IdcServer.main(Unknown Source)
Thanks,
Qian

Hi liqian,
NoClassDefFoundError means some error with you class files, or may be you dont have acces to the folders where the class files are.....Check if you have all the required class files.
regards,
sapan

Error while starting Content server

Hi,
I am trying to start the content server, but the is a error while starting up.
Following is the error
dc2serv:sqddq1 4> /sapdb/programs/bin/dbmcli -n dc2serv -d DQ1 -u control,bridg012 db_stop
Must be called by root or effective user 209 effective group 311
Error! Connection failed to node dc2serv for database DQ1:
Error writing to pipe:(32:Broken pipe)
Trupti

Hello Trupti,
A) What is the version of your database?
Please update with output of the following commands:
more /etc/opt/sdb
id sdb
id sqddq1
ls -la /sapdb
ls -la /sapdb/DQ1
/sapdb/programs/bin/sdbregview -l
/sapdb/programs/bin/dbmcli db_enum
/sapdb/programs/bin/dbmcli inst_enum
ps -efe | grep kernel
ps -efe | grep vserver
B) Please run the following command as root:
       /sapdb/programs/bin/sdbverify
    & post the results.
C) Please see the documentation at https://www.sdn.sap.com/irj/sdn/maxdb
     -> The Complete SAP MaxDB Documentation Set
    -> SAP MaxDB 7.7 Library -> Tools : Database Manager CLI
    -> Overview of All DBM Commands
It's recommended to use the db_stop DBM command if the db_offline DBM command has not been successful.
And db_stop will immediately end the database instance process & transfer the database instance to the OFFLINE operational state.
Thank you and best regards, Natalia Khlopina

Apache start error on SAP Content server 6.40

Hi all
I installed a SAP Content Server 6.4 successfully in Solaris 10 with MaxDB 7.6.
Although Installation is finished completely I got an syxtext error when apache web server is started after completing installation as below;
dmscs/bin>./apachectl start
Cannot load /usr/sap/XXD/apache/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal:sap/Apache/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
./apachectl start: httpd could not be started
let me know to solution if you had experienced with the same problem.

Hi Nelis,
We did the module registration after after installation, Please find the below of httpd.conf.
=======================================================================================
Example:
LoadModule foo_module libexec/mod_foo.so
LoadModule sapcs_module libexec/mod_sapcs.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module         libexec/mod_env.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module        libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module      libexec/mod_status.so
LoadModule info_module        libexec/mod_info.so
LoadModule includes_module    libexec/mod_include.so
LoadModule autoindex_module   libexec/mod_autoindex.so
LoadModule dir_module         libexec/mod_dir.so
LoadModule cgi_module         libexec/mod_cgi.so
LoadModule asis_module        libexec/mod_asis.so
LoadModule imap_module        libexec/mod_imap.so
LoadModule action_module      libexec/mod_actions.so
LoadModule speling_module     libexec/mod_speling.so
LoadModule userdir_module     libexec/mod_userdir.so
LoadModule alias_module       libexec/mod_alias.so
LoadModule rewrite_module     libexec/mod_rewrite.so
LoadModule access_module      libexec/mod_access.so
LoadModule auth_module        libexec/mod_auth.so
LoadModule anon_auth_module   libexec/mod_auth_anon.so
LoadModule dbm_auth_module    libexec/mod_auth_dbm.so
LoadModule digest_module      libexec/mod_digest.so
LoadModule proxy_module       libexec/libproxy.so
LoadModule cern_meta_module   libexec/mod_cern_meta.so
LoadModule expires_module     libexec/mod_expires.so
LoadModule headers_module     libexec/mod_headers.so
LoadModule usertrack_module   libexec/mod_usertrack.so
LoadModule log_forensic_module libexec/mod_log_forensic.so
LoadModule unique_id_module   libexec/mod_unique_id.so
LoadModule setenvif_module    libexec/mod_setenvif.so
Reconstruction of the complete module list from all available modules
(static and shared ones) to achieve correct module execution order.
[WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
AddModule mod_sapcs.cpp
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
AddModule mod_log_forensic.c
AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
Can you guide me where exactly point to the correct location for /ContentServer/ContentServer.dll in httpd.conf.
=========================================================================
#<VirtualHost *:80>
   DocumentRoot /www/docs/dummy-host.example.com
   ServerName dummy-host.example.com
   ErrorLog logs/dummy-host.example.com-error_log
   CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /export/home/sapcs1/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
Regards,
Panu
Edited by: kumar panu on Sep 7, 2010 9:05 AM
Edited by: kumar panu on Sep 7, 2010 9:07 AM
Edited by: kumar panu on Sep 7, 2010 9:08 AM
Edited by: kumar panu on Sep 7, 2010 9:08 AM

Configure content server with DMS

i have a content server setup by BASIS team , i need to use this server as a storage category for DMS to store Documents on it .
what is the required configurations to integrate the content server with DMS .

Dear Reda,
for this information please see the online documentation at
Knowledge Provider (BC-SRV-KPR) - SAP Library
SAP Library - SAP Content Server
I hope that this could answer your questions and help your basis team.
Regards,
Christoph

Error while opening content server url

Hi all,
I am working on version 11.1.1.5
My admin server is running and UCM server is also running. But while I am trying to open the content server url ( /cs ) it is giving me following error.
>
Server Message
The Server is unavailable.
Please contact the administrator of this site to report the problem.
Click here for server process administrationIn weblogic console for datasource CSDS i have checked the connection and it is working fine. So there is no issue with database.
Also I am not getting any error on admin or UCM server console.
Please help.
--NavinK

Thanks Srinath for the reply.
the problem was
Caused By: intradoc.data.DataException: !csDbUnableToExecuteSql,DELETE from Conf
ig WHERE dSection='DevUpdate' AND dName='RevClasses' AND dVersion='11.1.1.2.0'!$
ORA-01552: cannot use system rollback segment for non-system tablespace '******_OCS'I found the solution, I just created new undo tablespace and make it default. after that tried to execute create statement.
CREATE UNDO TABLESPACE "UNDOTMP"
DATAFILE 'UNDOTMP.DBF01' SIZE 100M REUSE
AUTOEXTEND ON NEXT 51200K MAXSIZE 15000M
ALTER SYSTEM SET undo_tablespace=UNDOTMP SCOPE=BOTH; Its working now.
Thanks
--NavinK

Error while checking content server installation

hai all,
I had installed content server 6.30.And installation is successful.I restarted the server also.when i am testing the connection to the content server by using the url-http://hostname:portnumber/ContentServer/ContentServer.dll?serverInfo.
I am geeting the error ,the page cannot be dusplayed.
While installing the content server,i used the default port-1090.With the same i am trying to check it.
Please help me out.
Thanking you,
Regards,
venkat.

Venkat,
Did you get this working?
If so, could you provide your httpd.conf and cs.conf files for comparison
Thanks in advance for your response.
Jeff

Error in configuring content server

Similar Messages

Maybe you are looking for