Error in Configuring Identity Synchronization

I get this error int eh Directory Service Logs:
Plugins BasicSaintRPC.cpp:341(logCode=0, connectionID=0) BasicSaintRPC::run() exiting because 'XML parse error. Expected a single root element to remain on the parse stack.' (7001)
and
In the Identity Synchronization Error Logs, I get:
"The saint server listening on port 51024 failed to establish a connection with client connecting from /xx.xx.xx.xx:32952 because 'The Connector to subcomponent interface subcomponent could not be authenticated.'."
I am considering that the problem is witht he SSL certificates, but as far as I can tell, the idsync Certinfo shows that there are paths for the certificates, and if i look in the path, the certificate db are there.
What else might be wrong in the configuration of the ssl?
Bobby Ramsook
CCNY

This error is due to the scripts not being run correctly. Read the instructions carefully and run them again. The first script is run as user "sys", the second one as your user you indicate in the parameters to the first script. Make sure you use the _all scripts.
Heidi.

Similar Messages

  • Error while installing "Identity Synchronization for Windows"

    Hello All,
    I am in the middle of installing Identity Synchronization for Windows and I am running into a probelm.
    After I gave the ldap address of the Java Directory server, (which is installed in the same machine that I am installing ISW on), then I specified the "Configuration Root Suffix" , and then I gave the "cn=Directory Manager" credentials, It returns an error saying...
    The selected Directory Server is not a configuration
    directory server. You must select a directory server that
    has "o=netscaperoot". Please note that merely adding the
    +"o=netscaperoot" entry will not suffice.+
    I am running Solaris 10 (SPARC) on a T2000, and I downloaded the latest version of "Sun Java System Directory Server Enterprise Edition" (6.2 I think it is...is there a way to find out?) and I downloaded ISW (1.1 SP1) from Sun.com...
    Anyone else had this problem? Any solutions? Thanks.
    -C

    That was that !
    The proof:
    possum@laptop ~/Downloads/Sun/Directory Server $ tar tvzf DSEE.6.2.Solaris-Sparc-full.tar.gz | more
    drwxr-xr-x svbld/staff       0 2007-08-21 13:51 DSEE_Directory_Editor/
    -rw-r--r-- svbld/staff 3154227 2006-10-23 15:23 DSEE_Directory_Editor/DE_InstallConfigGuide.pdf
    -rw-r--r-- svbld/staff  113483 2006-10-23 15:23 DSEE_Directory_Editor/DE_ReleaseNotes.pdf
    -rw-r--r-- svbld/staff 9649312 2006-10-23 15:23 DSEE_Directory_Editor/de.class
    -rw-r--r-- svbld/staff     178 2006-10-23 15:23 DSEE_Directory_Editor/install.bat
    -rw-r--r-- svbld/staff     167 2006-10-23 15:23 DSEE_Directory_Editor/install.sh
    drwxr-xr-x svbld/staff       0 2007-08-21 13:53 DSEE_Identity_Synchronization_for_Windows/
    -rw-r--r-- svbld/staff     831 2007-08-21 13:53 DSEE_Identity_Synchronization_for_Windows/README.txt
    drwxr-xr-x svbld/staff       0 2006-11-07 01:32 DSEE_Identity_Synchronization_for_Windows/installer/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:16 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:17 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:16 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/
    drwxr-xr-x svbld/staff       0 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/
    drwxr-xr-x svbld/staff       0 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/
    -rwxr-xr-x svbld/staff  186114 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_zh.properties
    -rwxr-xr-x svbld/staff  163040 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_es.properties
    -rwxr-xr-x svbld/staff  163040 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_es_ES.properties
    -rwxr-xr-x svbld/staff  184456 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_zh_TW.properties
    -rwxr-xr-x svbld/staff  233399 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_ko.properties
    -rwxr-xr-x svbld/staff  233399 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_ko_KR.properties
    -rwxr-xr-x svbld/staff  162199 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_de.properties
    -rwxr-xr-x svbld/staff  162199 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_de_DE.properties
    -rwxr-xr-x svbld/staff  172057 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_fr.properties
    -rwxr-xr-x svbld/staff  172057 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_fr_FR.propertiesSo, we need both packaging: native PKG and tar.gz ! Great !
    I think this thread can be marked as resolved now.

  • Can't configure Identity Synchronization for Windows through Server Console

    Hi everybody!
    I am trying to get Sun Java System Directory Server EE talking with Windows Active Directory buy my progress has come to a halt getting Identity Synchronization for Windows 6 configured and working. I would appreciate any hints!
    Here are the steps I have taken:
    1. I installed Directory Server Enterprise Edition 6.3.1 using native packages, no problems there (in terms of adding resources to directory, browsing them, etc).
    2. I installed the Message Queue (3.6 05Q1) that is bundled with the zip archive of DSEE
    3. I installed Identitty Synchronization for Windows (6), that is bundled with the zip archive of DSEE
    4. Logged into Sun Java System Server Console as per instructions after install.
    Here is where I am stuck!
    I logged in, but something is really weird! Here is what my structure looks like in the default view:
    domain name
    +Server
    ++Server Group [desc: Directory Server 6.0 /opt/SUNWdsee/ds6]
    ++Server Group (1) [var/mps/serverroot]
    +++Administration Server
    +++Identity Synchronization for Windows [details are totally blank... even icon is an empty blue square!]
    This is the second time I went through the process of installing all this stuff, I made sure to pay attention to the installation instructions as best as I could, but I am very new to Solaris and unfortunately am on an extremely tight deadline.
    I am suspecting the problem has something to do with ports or directories, but my knowledge of Solaris is not even at a level where I can troubleshoot this by myself. Even if you have some advice that seems stupid to you, please let me hear it! I am pretty stupid, I might benefit from it!!
    Please, if anyone has any hints or suggestions, I would love to hear them. Like I said, I configured all this while following the installation guides, but I am worried I missed something or misunderstood something.
    Thanks in advance,
    Al
    Edited by: newtmonkey on May 25, 2009 2:05 AM

    Hello wlier, thanks for all your help with this! I really appreciate it.
    Reinstalled this whole thing, and at least I got everything under one server group... still can't access ISW though... it is listed in the leftside pane, but when I click on it the rightside pane goes completely blank.
    ~status of idsnyc is:
    -no connectors were found
    -System Manager Status: Started
    next step is "1. create an initial configuration using the product's console..."
    ~installed/configured everything as root
    ~no errors generated when I login to the console, but when I expand the hostname in the leftside pane I get the following error:
    Exception in thread "Thread-2" java.lang.UnsatisfiedLinkError: /usr/lib/mps/libjss4.so: ld.so.1: java: fatal: libnss3.so: open failed: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1676)
    at java.lang.Runtime.loadLibrary0(Runtime.java:822)
    at java.lang.System.loadLibrary(System.java:993)
    at org.mozilla.jss.CryptoManager.loadNativeLibraries(CryptoManager.java:1443)
    at org.mozilla.jss.CryptoManager.initialize(CryptoManager.java:912)
    at com.netscape.management.client.util.UtilConsoleGlobals.initJSS(Unknown Source)
    at com.netscape.management.client.util.UtilConsoleGlobals.getLDAPSSLSocketFactory(Unknown Source)
    at com.sun.directory.wps.ui.gui.view.PSWServer.<init>(PSWServer.java:71)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
    at java.lang.Class.newInstance0(Class.java:350)
    at java.lang.Class.newInstance(Class.java:303)
    at com.netscape.management.client.topology.ServerNode.createServerInstance(Unknown Source)
    at com.netscape.management.client.topology.ServerNode$ServerLoadThread.run(Unknown Source)
    ~If "run the Administration Server from the Server Group" means what I think it means, I can do that with no problem. I can double click on the Administration Server and configure various options, start/stop the server, etc.
    ~I just have one interface/hostname configured, and the Server Console shows the correct name
    It's like it's not making the connection to the ISW server (btw, it is listed as "isw-solaris1"... is this okay? "solaris1" is the hostname for this server). From what I understand after logging in to Server Console as Directory Manager, it should be asking me for a password to access ISW, but I don't any kind of login/password prompt.
    I should be logging in to Server Console on the port I configured during ISW installation, right? In my case, port 1390.
    We don't have a service plan and I doubt my company would want to spring the cash for it, so I'm pretty much stuck!!

  • Need help with error configuring Identity Management in OAS 10g

    Hi,
    I am configuring SSO in OAS 10g, After successful installation (with sso option selected) when I go to the management interface and attempt to configure Identity Management it fails with the following error:
    Error configuring identity management. oracle.ias.configtool.config.ConfigException: Unable to retrieve SSO DB information.Base Exception: oracle.ias.configtool.config.ConfigException: oracle.ias.configtool.config.ConfigException: oracle.ias.configtool.config.ConfigException: Unable to retrieve SSO DB information . Base Exception : Error when reading seeAlso of replicaid entry - java.lang.NullPointerException Status code 3
    I am totally stumped, cant find any instance of this error in docs etc. PLEASE HELP.
    I am trying to setup OAS to SSO with MS AS for oracle ebusiness suite 11i.
    Thanx in Advance,
    Sean

    Check that your insfrastructure database is up and running, it's accesible, as well, check for OID procs and demons that ports for OID are open and that you can make ldapbind this last may not be necesary as the error say about database, but is good to check also. Go to *$ORACLE_HOME/opmn/logs* and check the files there to see if other process are having problems.
    Greetings

  • Error configuring identity management

    Hi, i´ve installed a middle tier instance of AS 10g , and i want to register it into a oid instance, but when i try to do this trough EM it fails and show the following information in the logs, could anobody help us, I'm sure that the oid is up and running.
    Thanks
    Santiago
    1st Log
    Error
    Error configuring identity management. Some of the plugins in this config tool
    failed. See the log file /oracle/product/10.2/config/infratool.log for more
    details.
    2nd Log
    heck /oracle/product/10.2/sso/log/ssoreg.log for details of this registration
    Process exit code 1
    Configuration succeeded for IASProperty
    Configuration succeeded for IAS
    Configuration succeeded for LDAP
    Configuration succeeded for JAZN
    Configuration succeeded for DCM
    Configuration failed for HTTPD
    Configuration failed for MODOSSO
    [oracle10@gncser10 config]$ more /oracle/product/10.2/sso/log/ssoreg.log
    Thu Dec 14 20:06:35 COT 2006 ========================================Thu Dec 14
    20:06:35 COT 2006 OracleAS Single Sign-On Registration Tool
    Thu Dec 14 20:06:35 COT 2006 ========================================Thu Dec 14
    20:06:35 COT 2006 Parameters passed to SSO registration tool :
    param0:-site_name param1:bpel1012.gncser10.co.gasnatural.com param2:-mod_osso_ur
    l param3:http://gncser10.co.gasnatural.com:7777 param4:-config_mod_osso param5:T
    RUE param6:-oracle_home_path param7:/oracle/product/10.2 param8:-u param9:oracle
    10 param10:-config_file param11:/oracle/product/10.2/Apache/Apache/conf/osso/oss
    o.conf param12:-admin_info param13:cn=orcladmin
    Thu Dec 14 20:06:35 COT 2006 -DinstallTypeThu Dec 14 20:06:35 COT 2006
    -DoldOracleHomeThu Dec 14 20:06:35 COT 2006 -DoldOHSUser=root
    Thu Dec 14 20:06:35 COT 2006 SSO database is jdbc:oracle:thin:@ldap://192.9.200
    .188:3060/asdb,cn=oraclecontext
    Thu Dec 14 20:06:36 COT 2006 Exception while creating database connection :java
    .sql.SQLException: Io exception: The Network Adapter could not establish the con
    nection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the
    connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :137)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :174)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :286)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
    433)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
    n.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
    at java.sql.DriverManager.getConnection(DriverManager.java:512)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at oracle.security.sso.SSORegistrar.main(SSORegistrar.java:311)
    Thu Dec 14 20:06:36 COT 2006 Check if your database is up and running.

    Hi,
    Saw this in the SSO registration log:
    Thu Dec 14 20:06:36 COT 2006 Exception while creating database connection :java
    .sql.SQLException: Io exception: The Network Adapter could not establish the con
    nection
    Thu Dec 14 20:06:36 COT 2006 Check if your database is up and running.
    Is your infrastructure database running? Can you connect to it via sqlplus or tnsping it from your middle-tier?
    Jim

  • Setup synchroniz​e with address for Sage ACT! showed Runtime Error: Cannot configure the section.

    Hello Blackberry Senbai...
    As my problem showed as subject line. "When I setup synchronize with address book for Sage ACT! showed Runtime Error: Cannot configure the section."
    Setup was stopped from this point.
    my system info..
    Desktop Manager version is 5.0 downloaded from Blackberry website.
    ACT version is 2010.
    OS: Window XP Pro with service pack 3
    Thank you for your time to review my problem.

    Hi and Welcome to the Forums!
    Since the version of ACT that you state is not contained in the PIM compatibility matrix, I'm not sure that there is anything to be offerred...
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HANA XS SAML Configuration - Error when saving Identity Provider

    Dear experts,
    I'm currently using a SAP HANA SP8 environment from my AWS account. During the creation of the Identity Provider, the following error message is being displayed:
    Error: PreparedStatement.setInteger: expected int for second argument, but got: string
    The error is triggered in file http://<host>:8000/sap/hana/xs/admin/logic/idp.xsjs
    The error is very easy to reproduce. Just follow the steps below:
    1. Log into http://<host>:8000/sap/hana/xs/admin/
    2. Go to SAML Configuration > Identity Provider
    3. Click on the button on the left side of the shell to add a new Identity Provider
    4. Paste the IDP Metadata extracted from your IDP on the Metadata field and click on the Parser button
    5. Add a name to your IDP Config
    6. Click on the Create button. The error will be displayed.
    Anyone has faced this problem and know how to fix it?
    Regards,
    Gustavo

    Hi Gustavo,
    I also had this error when adding IDP and I found a workaround for this. The error is due to the port in the "Base URL" field. So, before you click "Save", just remove the port number. For example, if the base URL is parsed into https://ids-test.wdf.sap.corp:443, just remove the port number which means https://ids-test.wdf.sap.corp. Save it first, then you choose this IDP and edit it, just add the port number and save it again.
    Best regards,
    Wenjun

  • I can't access the Identity Synchronization console!!

    Hi, at first sorry for my english, I'm from spain :)
    I've installed Sun Directory server 5.2 in a Windows 2003 server machine.
    I need to synchronize sun ldap directory with active directory in another machine, and I've installed Identity Synchronization for windows 12004Q3 in the sun ldap's machine. Everything was right, I think, but when I try to open Identity Sychronization console from system server console, I receive an error. I mean, I'm asked about the configuration password and when I introduce it, I receive this error message:
    Invalid argument: {0} - {1}
    I don't know what is happening, when I test from command line I receive this output:
    C:\Program Files\Sun\MPS\isw-ldapserver\bin>idsync printstat -w sespa -q sespa
    Exploring status of connectors, please wait...
    No connectors were found.
    Sun Java(TM) System Message Queue Status: Started
    Checking the System Manager status over the Sun Java(TM) System Message Queue.
    System Manager Status: Started
    Remaining Installation and Configuration Steps:
    1. Create an initial configuration using the product's console or by migrating
    from a previous installation using 'idsync importcnf'.
    2. Prepare every Sun Directory Server included in this configuration by using
    the console or the 'idsync prepds' command.
    3. Install connectors for every configured directory source.
    4. After installing each Sun Directory Server connector, run the installer aga
    in on every master and on every read-only replica to install the Sun Directory S
    erver plugin.
    5. Run 'idsync resync' to establish links between existing Directory Server an
    d Windows users.
    6. Start synchronization using the console or the 'idsync startsync' command.
    SUCCESS
    But I can't finish de installation because I can't acces de console, what could be de cause? I'm starting whith ldap and I afraid I'm not very expert.
    Thank you very much!!
    Message was edited by:
    mariafro
    Message was edited by:
    mariafro
    Message was edited by:
    mariafro

    It is not guaranteed to work .
    ISW 1.1(2004Q3) has not been tested with DS 5.2patch3 (2004Q4)
    The release notes require 5.2patch2 (or higher).
    But then mention a known issue with 5.2patch3:
    Identity Synchronization for Window installation fails on Directory Server 5.2p3 installed with Sun Java Enterprise System 3. (5092530)
    You cannot install the core Identity Synchronization for Windows product against Directory Server 5.2 P3 or higher. Identity Synchronization for Windows 1 2004Q3 will support Sun Java Enterprise System 3 (Directory Server 5.2 P3) as a data synchronization source only.
    Ludovic

  • Error 25009 Install FIM Synchronization

    Hello,
    i try to install FIM Sync and i have a remote sql server but i have this error
    Product: Forefront Identity Manager Synchronization Service -- Error 25009.The Forefront Identity Manager Synchronization Service setup wizard cannot configure the specified database. OLEDB Provider Information:
    Description = 'Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.'
    Failure Code = 0x80004005
    Minor Number = 18452
    <hr=0x80230406>
    Any idea ?
    Thanks

    Yes i tried with a domain account but nothing.
    Actually the installation of FIM portal is OK but not FIM synchronization !!!
    it's ok now, it was an error on permission configuration for fim service account
    Hi,
    I don't suppose you could please elaborate on which permission configuation error was encountered, and how it was resolved?
    I'm running into the same issue while trying to install the FIM sync service component.
    Thanks in advance!
    Farrell

  • Get System Identity Synchronization for Windows working in relication mode

    I have got ISW running on DS 5.2 it is all working correctly.
    What I want to do is set up a relica DS server with ISW on it as well.
    What I have done:
    Install DS5.2 on another machine and start replication and it works all data is in the new LDAP server, but I am having problems install the ISW software on the new server.
    Steps:
    1) On original master with ISW installed and tell ISW of a secondery server. It tell me to install connector an that machine.
    2) On my replica server I run "runInstaller.sh" and it all seems to work except when I stop and restart the server I get the followowing errors:
    # /etc/init.d/directory start
    [11/Aug/2006:15:07:38 +0100] - ERROR<4167> - Startup - conn=-1 op=-1 msgId=-1 - System error Load library /opt/SUNWiswdp/lib/64/psw-plugin.so: error ld.so.1: ns-slapd: fatal: /opt/SUNWiswdp/lib/64/psw-plugin.so: open failed: No such file or directory
    [11/Aug/2006:15:07:38 +0100] - ERROR<4140> - plugin_setup - conn=-1 op=-1 msgId=-1 - Configuration error Could not load symbol "pswsync_init" from library "/opt/SUNWiswdp/lib/psw-plugin.so" for plugin pswsync
    [11/Aug/2006:15:07:38 +0100] - ERROR<4112> - Bootstrap config - conn=-1 op=-1 msgId=-1 - Configuration error Unable to load plugin "cn=pswsync,cn=plugins,cn=config".
    Server not running!! Failed to start ns-slapd process.
    /etc/init.d/directory: unable to start the Directory Server 5.2
    I have checked and the above files are not installed well SUNWxrcsj and SUNWiswcm have not be installed.
    Question:
    How do I install ISW on a secondery server. I thought I was following the online docs, but I guess I am missing something.

    Hello All,
    Waiting for any idea for the long time. I am trying again and again by restoring my directory server zone. I have two whole root zones one i am using for sun portal and communication suite 5 and other is for directory server. They are working fine. but when i try to install the Sun Java System Identity Synchronization for Windows 6.0 on directory server zone. Some time it hangs at 97% while installing core and some time it giving error the installer cannot upload some entries in the template this error comes when i restore my directory server zone.
    Can some please give me idea why it giving these error on solaris zone.
    Thanks in Advance,
    Sikander

  • Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

    Article for those who hate Logic error windows
    Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
    and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
    Logic Pro:
    System Overload.
    The audio engine was not able to process all required data in time.
    (-10011)
    Error while trying to synchronize Audio and MIDI.
    Sample Rate xxxxx recognized.
    Check conflict between Logic Pro and external device.
    The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
    The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
    You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
    These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
    Here is the configuration of my computer:
    iMac12, 2
    CPU: Intel Core i5 3,1 GHz
    Memory: 4 GB
    And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
    It's sad.
    When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
    I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
    Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
    Logic immediately began to sing.

    Hi gabaghoul
    Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
    It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
    Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
    Pay attention to repetitive events in a console and events with suitable timing, not so far from error
    The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
    Message was edited by: spred

  • (rare?) Error while trying to synchronize Audio and MIDI.

    Hello there,
    My problem: Until today, I've been working with all my projects without any problems with my configuration, but today I've turned on the computer and when I play any project (including a new project with one or two audio tracks or the SAME PROJECT that i've been working the last night), 3 or 4 seconds later I get the fantastic and typical error from logic and an apparently more slow performance loading projects...
    everytime... play, and error...play (or pause) and error...
    "Error while trying to synchronize Audio and MIDI.
    Sample Rate 41347 recognized.
    Check conflict between Logic Pro and external device."
    and sometimes... (randomly)  
    "System Overload. The audio engine was not able to process all required data in time."
    ... and I haven't touched anything / no updates / no setup changes... NOTHING.
    I've tried all these things (searching in the forum) with NO luck:
    http://support.apple.com/kb/TS2111
    http://support.apple.com/kb/TA24535
    My equipment:
    Macbook pro 2,4 Intel Core 2 Duo / 2 GB RAM
    Logic Pro 9.1.3
    Snow Leopard 10.6.7
    Motu ultralite Mk2
    Lacie quadra 1 TB (FW800)
    - I have a motu ultralite mk2, but i've tried with the built-in audio too, and I'll just get the same performance.
    - I've tried with the lacie hardrive on and off and with projects in the internal hardrive and others with all the audios in the external.
    The funny thing is that i've been working in a project this last night and all PERFECT, and now its impossible work with it, and I haven't changed anything.
    PLEASE, any help? I'm confused and I need to finish some works...
    THANKS!

    If the MOTU unit has a reset procedure, unplug it from the Mac and do it now. That's simialr to what the older 828MkII units used do when they needed to be run through the reset procedure.
    It can be caused by a Firewire/USB glitch or power surge when powering up the computer.
    p.s.
    As a side note, I remember that same error.....
    "Error while trying to synchronize Audio and MIDI. Sample Rate 41347 recognized."
    From Logic 3.5, it's been around for that long, with different sample rates of course.
    Back then it was from bad audio drivers.. it's difficult to pin down some of these errors as they can be caused by different things.
    pancenter-

  • Error while configuring Vintella SSO

    Hi,
    I'm trying to implement SSO with Vintela in BO XI3.1 SP3
    AD Authentication is working corectly.
    I'm getting the following error after configuring Vintela, the error shows when trying to login:
    "HTTP Status 500 - com.wedgetail.idm.sso.ProtocolException: com.wedgetail.idm.spnego.server.SpnegoException: GSSException: Failure unspecified at GSS-API level (Mechanism level: com.dstc.security.kerberos.KerberosException: Successfully matched service principal "HTTP/SERVER" but not key type (23) + KVNO (143) in this entry: Principal: HTTP/SERVER Type: 1 TimeStamp: Wed Dec 31 18:00:00 CST 1969 KVNO: -1 Key: 3, ad c1 7f df e3 61 9e 9e )"
    I have also tried to use :
    -Dcom.wedgetail.idm.sso.password=Password in the Java configuration, (commenting the keytab entry on Web.xml) but when I comment the idm.keytab in the web.xml, I can't even reach the Infoview login page, It shows a 404 error
    Any help will be appreciated
    Thanks,
    Akhil

    Hi Michelle
    I have changed the Client in Java from 000 to 001. I have added the certificate to ACL in 001 in my ABAP system. After doing that, I am getting the following error message.
    N  Comparing certificates ...N  *** ERROR => ASN.1 blob lengths are not identical. 575 769. [ssoxxkrn.c   2074]
    Leaving VerifyOwnSystemInfo...
    N  HMskiVerifyOwnSystemInfo failed with rc=19.
    N  *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c   1067]
    N  dy_signi_ext: issuer not trusted
    M  *** ERROR => SosIAnchorArrayCreatable: T42/M0 in state cancel [thxxtool2.c  947]
    My TWPSSO2ACL Entries Client 001.
    ============================
    MANDT WPS_SYSID WPS_MANDT
    001                 BWD       001
    The Production client in ABAP is 100 and not 001. when I have changed the Clinet 100 in Java, then also I am getting the error message mentioned in my main question.
    So I am confused as to where I can make the changes in the system. Please advise!!!!!!!!!!

  • Error while configuring channels in B2B 11g

    Hi b2bgurus,
    I am implementing RosettaNet protocol in 11g. 3C3 Invoice Notification. While configuring channels i got this following error:
    "Messages for this page are listed below.
    Acme_Custom_V02.00_Invoice_Notification_Outbound is not valid. Please correct the following errors.
    Error -: B2B-52255: Certificate alias not specified in the secure delivery channel Acme_Channel.
    Error -: B2B-52326: Transport protocol with https url has to have valid keystore location and password in host "
    I get the above error while I provide http url as input. Do we have a protocol where we can provide https url?
    Please explain i am new to B2B.
    Thanks in advance

    get this error when i provide the url while channel creation. SSL is enabled by using BIG IP. Hence preparation of Key store is not requiredYou understanding is not correct. If you are initiating a SSL connection from Oracle B2B (by giving a HTTPS URL in delivery channel), then you have to configure identity and trust store in your Weblogic servers (SOA server) and you have to configure keystore on Oracle B2B console as well. As I mentioned earlier also refer the blog (http://anuj-dwivedi.blogspot.com/2010/10/enabling-ssl-on-oracle-b2b-11g.html) and perform the required steps.
    If you don't configure a keystore then you CAN NOT initiate a SSL connection from Oracle B2B.
    If you want Big IP to handle SSL then from Oracle B2B you have to initiate a plain HTTP connection and at BIG IP you have to route the request to the respective HTTPS channel (which I am not sure is possible though I am not familier with BIG IP)
    Regards,
    Anuj

  • Can't log into Sun DS 5.2 Console after installing Identity Synchronization

    Installing the Identity Synchronization module over the directory server prevents me from logging into the server using the console.
    I installed Sun Java System Directory Server 5.2 on a Windows 2000 server. After that, I installed the following in the order below:
    1. Patch 5077789 Patch 2
    2. Patch 117667-03
    3. Sun Java System Message Queue 3.5 SP1.
    Upto this point, I was able to log into the DS server without any problems. I was also able to access and use the MQ.
    After this, I installed the Sun Java System Identity Synchronization module.
    Now I am unable to log into the DS console. The error I get is "Cannot logon because of an incorrect User ID, Incorrect password or Directory problem.
    java.net.SocketException: Connection reset"
    Any ideas what the problem might be? I've tried uninstalling, cleaning up and reinstalling everything, but to no avail.
    Thanks in advance

    Look at the logs/error under admin-serv directory for more clue
    Make sure hostname.ldapdomainname (eg: ldap1.example.com) for LDAP server is set in Windows hosts file as 1st field.
    cd to slapd-hostname and run
    .\saveconfig
    Notepad the ldif file generated, search for userPassword for cn=admin-serv-hostname, AND CHECK IF there is passwordExpirationTime set, if there it could mean userPassword of admin-serv-hostname expired, if so you may follow a recent thread to set it to never expire.
    http://swforum.sun.com/jive/thread.jspa?threadID=48144&tstart=0
    Gary

Maybe you are looking for

  • Media Export not working in Premiere Pro CC

    I own the latest version of Premiere Pro CC 2014 on a PC.  It's been working fine until a few days ago when I tried EXPORT / MEDIA Nothing happens.  No crash, no window opening.. Nothing.  It sits there as if it never got the request.  I cannot get i

  • Streaming Video, iTunes rentals are too dark.  Help!

    Using a 2013 Macbook Air, pretty much fully loaded. I'm noticing that movies purchased on iTunes, as well as Handbrake rips of my own DVDS, and streaming through both Amazon Prime and Netflix, using MS Silverlight and Quicktime... all videos are too

  • What is the best way to get sound to external monitor?

    Okay I understand that to get video from my mbp to lcd tv, I can hook it up with a dvi to hdmi cable. But how do I get sound to the tv? what would be the best way to go about this

  • Dbms_lob.createtemporary  memory leak even with dbms_lob.freetemporary

    I've got procedure which basicaly transforms one xml structure into other xml structure and then inserts that other into clob column. I'm using xmlParser.parser , xmlDom.DomDocument . After every iterations of procedure my PGA grows . I'm using xmldo

  • Help: jap or english language quicktime

    hello guys, can you help me? i am an english speaker although i am living in japan at the moment. i installed the latest quicktime+itunes package from the english apple homepage, however everytime i installed it, it comes out automatically as japanes