Error in Confirm Operations in transation CO12

Dear all.
     When we are at CO12 transaction confirming operation 020, we need to confirm operation 010 automaticaly.. 
     I used an Exit to do this...In this exit i confirm the 010 operation using a BAPI, and the operation 10 is confirmed. 
     But we have a litle problem, the problem is that when i return to the main window and try to press the button "Propose Actual Data" i get a Dump in the system. 
"Exception condition "ERROR_READ_AFVG" raised 
     The termination occurred in the ABAP program "SAPLCOBO" in  "CO_BT_AFVG_READ_WITH_INDEX". 
The main program was "CORUCOLCONF1 ". 
     The termination occurred in line 60 of the source code of the (Include) 
program "LCOBOU03" 
of the source code of program "LCOBOU03" (when calling the editor 600)." 
     I've debugged the program and saw that there is an internal table (standard) called AFVG_BT is completly empty in contradicton with the same internal table (that is full with all the order operations) when i just confirm the 010 operation manually.
Best Regards,
Thanks in Advanced,
PMR.

after Confirming Operation 10 , Just check the table Entries of AFRU for this Operation.I think That BAPI is not creating the Operations .
Regards
Prabhu

Similar Messages

  • Make to Order for Configurable Material & Error in Confirmation

    Hello, PP Gurus,
                       I am doing one MTO for Fabric business but during the confirmation I am getting error that
    SALES order Stock does not Exist as well Please inform me Costing procedure in this scenario.
    *is it necessary to run MRP in this scenario?*
    Please see the all Details of Business so that U can give answer properly.
    One is raw fabric (Raw material) which has to passed different process to convert Colored fabric as my Finish product as well I can sale Raw fabric also.
    is it possible to maintain raw fabric and Colored fabric with same mat.code?
    I have configured the material as well all pricing BOM, Recipe its working properly.
    How can I assign the material to Operation? I am getting GRAY field in New Assignment in change recipe mode ..
    Is it possible to use Material type other than KMAT? I want to use Finish material type. If yes How?
    Right now I can create Process order from the Sales order but I am facing error in confirmation that Sales Order stock does not exist than I have to transfered stock to Sales order and error get solved temporarily but  I want to avoid this manual transaction to remove this error. Any configuration is required please inform.
    My configuration is given below.
    MRP Type : PD
    BOM item Category:  L Stock Item.
    In dependency & Profile I have set radio Button as Single level Bom explosion.
    Order Bom selection in profile.
    Strategy : 25 make to order for configure material.
    How can I do ? please suggest any changes
    I have only 9 months of SAP experience within short time I have gain lot knowledge from this site and other reading material as well my learning Learning thirst.
    thanks to all SAP gurus..
    THANKS IN ADVANCE .... Definitely I will reward points even if my some questions get solved...
    Regards,
    Bhavik dangi.

    Hi,
    You can use variant configuration for selling the colored fabric. Use the basic fabric as raw. and maintain variant configuarations to have many variants.
    Please use strategy 25. When you run MRP the planned orders will be generated and will be assigned to the sales orders. You can see it on the account assignment tab.
    In material master pleasse maintain Individual collective requirement indicator to 1-individual in the MRP-4 view.
    Then the stocks will be reserved to the specific sales orders.
    Thanks and regards
    Murugesan

  • SNMP V3 : Bad Credential Check "Error performing SNMP operation"

    Dears,
    I've tried to configure SNMP V3 on some devices using LMS 4 as required by a customer and all appears fine.
    Except that I could not use the template in netconfig as my customer desired to use AES rather then DES and there is no dropdown box for the priv encryption algorithm.
    After a week the customer tells me all his snmp v3 devices are now failing in the credentail check report.
    The message is "Error performing SNMP operation"
    I've tested this in my lab using LMS 4 and I can confirm that there is no problem speaking snmp v3 to the devices.
    D:\CSCOpx\objects\jt\bin>snmpwalk.exe -v3 -l authNoPriv -u oss -a SHA -A OSS_LAB123   10.170.46.250
    Cannot find module (UCD-SNMP-MIB): At line 4 in (none)
    Cannot find module (UCD-DEMO-MIB): At line 4 in (none)
    Cannot find module (NET-SNMP-AGENT-MIB): At line 4 in (none)
    Cannot find module (UCD-DLMOD-MIB): At line 4 in (none)
    RFC1213-MIB::sysDescr.0 = STRING: "Cisco Internetwork Operating System Software
    IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA6, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2005 by cisco Systems, Inc.
    Compiled Fri 21-Oct-05 01:59 by yenanh"
    RFC1213-MIB::sysObjectID.0 = OID: SNMPv2-SMI-v1::enterprises.9.1.427
    DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (354935628) 41 days, 1:55:56.28
    RFC1213-MIB::sysContact.0 = ""
    RFC1213-MIB::sysName.0 = STRING: "OSS-SW1"
    RFC1213-MIB::sysLocation.0 = ""
    RFC1213-MIB::sysServices.0 = INTEGER: 2
    But still LMS claims that there is an issue.
    Anyone else having this? Did anyone find a sollution?

    I just noticed a thread where Joe says this is expected behavior.
    I would be nice if the report could produce a sensible message such as "Failed", "RO OK" or "RO & RW OK"
    Shouldn't be that hard to fix this
    Cheers,
    Michel

  • Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemb

    Good Afternoon.
    I want to upgrade XIR3 to XIR3.1 for enabling IIS+SSO with Active Directory.
    But when I want to upgrade my system, I have the Following error:
    Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemblyCopy called out of sequence.
    Windows Server 2003 SP2 (Fully Patched)
    BusinessObjects Edge Standard XI 3.0 Windows (working)
    Patch I want to Install: 51036069.exe ,BusinessObjects Enterprise XI 3.1 FixPack 1.1 - WIN - INTL
    Thanks in advance for your help

    Hi All,
    Please clarify my following doubt,
    We are migrating from BO 6.5 to BO XI 3.1 intergrating with our application.
    I want to use the COM XI 3.1 SDK for the Desktop Intelligence. I did some code changes in the previous 6.5 SDK which we already used.
    Say, I changed the LoginAs() method to Logon() in the C++ file.When I tried to create the .dll file using Visual Studio 6.0, I got the following error,
    'Logon' is not the member of Application class.
    From this message, I understood that, still Application class of BO 6.5 was used and not BO xi and some libraries were also missing.
    Please correct me, if my understanding is wrong.
    Where can I get the BO xi 3.1 com SDK for DESKI? When searched in SAP portal, I get only the API reference and Developer guides.
    Thanks.

  • Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

    Hi Apple community!
    I have a [rather worrying] problem.
    When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
    " The operation can’t be completed because an item with the name “.DS_Store” already exists. "
    I am not given an option to skip this file or anything else.
    But I simply cannot complete the operation!
    I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
    but no success.
    The same thing keeps happening.
    At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
    but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
    So effectively, it seems I cannot backup my files anywhere!
    Any help or advice would be greatly appreciated.
    Thank you.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Error message "The operation can't be completed because an item with the name .DS_Store already exists"

    Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message  "The operation can't be completed because an item with the name .DS_Store already exists".
    The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
    All file types are susceptible
    the HDs are all Mac OS X formatted, no foreign file formats involved
    the HDs are all journal-enabled, OS X extended formats
    have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
    any ideas anyone?
    would appreciate any thoughts or sugestions, this has got me beat
    the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
    many thanks for any suggestions

    This is definitively a nuisance. When copying large amounts of files between volumes  try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
    gunnars-mac-mini-i7:Volumes gunnar$ man ditto
    NAME
         ditto -- copy directory hierarchies, create and extract archives
    SYNOPSIS
         ditto [-v] [-V] [-X] [<options>] src ... dst_directory
         ditto [-v] [-V] [<options>] src_file dst_file
         ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
         ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
         ditto -h | --help

  • Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

    This is what is happening after installing 2010 on to a computer that was running 2007 Outlook.  Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
    error. Then a pop up dialog box comes up with the following error
    Receiving reported error (0x80004005): The operation failed
    Does anyone know how to fix this
    Nexusxox

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing. Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • ERROR: The Propagation operation ended in error. java.lang.reflect.Undeclar

    Dear all,
    i am using bea weblogic 10.0 ant i am downloading the running Inventory.
    but the below problem occurc when i run ant task for downloading that is
    ant -buildfile propagation_ant.xml downloadSrc the below problem occurs. i am new to bea so how can i debug the problem
    VERBOSE: InventoryTreeWalker: visiting node: Application:ContentServices:BEA Repository:ContentNodes:Webmasters:Sports:I won`t step down from presidency Khan.txt
    ERROR: The Propagation operation ended in error.
    java.lang.reflect.UndeclaredThrowableException
    at weblogic.security.providers.xacml.authorization.XACMLAuthorizerMBeanImpl.policyExists(XACMLAuthorizerMBeanImpl.java:245)
    at sun.reflect.GeneratedMethodAccessor477.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.bea.p13n.security.internal.SecurityProviderProxy.invoke(SecurityProviderProxy.java:48)
    at $Proxy54.policyExists(Unknown Source)
    at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate$3.run(SecurityPolicyDelegate.java:241)
    at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate$3.run(SecurityPolicyDelegate.java:239)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate.kernelRunAs(SecurityPolicyDelegate.java:433)
    at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate.policyExists(SecurityPolicyDelegate.java:246)
    at com.bea.p13n.entitlements.management.internal.RDBMSSecurityPolicyManager.getSecurityPolicy(RDBMSSecurityPolicyManager.java:204)
    at com.bea.p13n.entitlements.management.SecurityPolicyManager.getSecurityPolicy(SecurityPolicyManager.java:119)
    at com.bea.propagation.content.online.util.SecurityHelper.getSecurityPolicy(SecurityHelper.java:146)
    at com.bea.propagation.content.online.util.SecurityHelper.getSecurityPolicies(SecurityHelper.java:122)
    at com.bea.propagation.content.online.hierarchy.ContentNodeHierarchy.discoverChildren(ContentNodeHierarchy.java:113)
    at com.bea.propagation.framework.hierarchy.ListNodeHierarchy.getChildrenNodes(ListNodeHierarchy.java:113)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:215)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst(InventoryTreeWalker.java:158)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst(InventoryTreeWalker.java:102)
    at com.bea.propagation.framework.tool.io.InventoryTreeExport.walkDepthFirst(InventoryTreeExport.java:88)
    at com.bea.propagation.framework.tool.io.InventoryFolderExport.walkDepthFirst(InventoryFolderExport.java:110)
    at com.bea.propagation.framework.tool.io.InventoryArchiveExport.walkDepthFirst(InventoryArchiveExport.java:103)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.writeInventoryToLocalFile(InventoryManagementServlet.java:1017)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.writeInventoryToLocalFile(InventoryManagementServlet.java:991)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.downloadOperation_Remote(InventoryManagementServlet.java:510)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.downloadOperation(InventoryManagementServlet.java:453)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.doService(InventoryManagementServlet.java:318)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.doPost(InventoryManagementServlet.java:199)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
    ERROR: The Propagation operation ended in error.
    java.lang.reflect.UndeclaredThrowableException
    at weblogic.security.providers.xacml.authorization.XACMLAuthorizerMBeanImpl.policyExists(XACMLAuthorizerMBeanImpl.java:245)
    at sun.reflect.GeneratedMethodAccessor477.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.bea.p13n.security.internal.SecurityProviderProxy.invoke(SecurityProviderProxy.java:48)
    at $Proxy54.policyExists(Unknown Source)
    at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate$3.run(SecurityPolicyDelegate.java:241)
    at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate$3.run(SecurityPolicyDelegate.java:239)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate.kernelRunAs(SecurityPolicyDelegate.java:433)
    at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate.policyExists(SecurityPolicyDelegate.java:246)
    at com.bea.p13n.entitlements.management.internal.RDBMSSecurityPolicyManager.getSecurityPolicy(RDBMSSecurityPolicyManager.java:204)
    at com.bea.p13n.entitlements.management.SecurityPolicyManager.getSecurityPolicy(SecurityPolicyManager.java:119)
    at com.bea.propagation.content.online.util.SecurityHelper.getSecurityPolicy(SecurityHelper.java:146)
    at com.bea.propagation.content.online.util.SecurityHelper.getSecurityPolicies(SecurityHelper.java:122)
    at com.bea.propagation.content.online.hierarchy.ContentNodeHierarchy.discoverChildren(ContentNodeHierarchy.java:113)
    at com.bea.propagation.framework.hierarchy.ListNodeHierarchy.getChildrenNodes(ListNodeHierarchy.java:113)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:215)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst(InventoryTreeWalker.java:158)
    at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst(InventoryTreeWalker.java:102)
    at com.bea.propagation.framework.tool.io.InventoryTreeExport.walkDepthFirst(InventoryTreeExport.java:88)
    at com.bea.propagation.framework.tool.io.InventoryFolderExport.walkDepthFirst(InventoryFolderExport.java:110)
    at com.bea.propagation.framework.tool.io.InventoryArchiveExport.walkDepthFirst(InventoryArchiveExport.java:103)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.writeInventoryToLocalFile(InventoryManagementServlet.java:1017)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.writeInventoryToLocalFile(InventoryManagementServlet.java:991)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.downloadOperation_Remote(InventoryManagementServlet.java:510)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.downloadOperation(InventoryManagementServlet.java:453)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.doService(InventoryManagementServlet.java:318)
    at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.doPost(InventoryManagementServlet.java:199)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)

    your error seems to indicate that your embeddedLdap isnt in sync with the Database ? Did you either delete files from your file systems or cleanup the portal db or finally used a copy of some existing database for your domain?

  • IMovie error message "The operation could not be completed"

    I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
    Any suggestions?
    Thanks

    My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder.  Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
    I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

  • Workspace customized dashboards: Error in the operation

    Hello
    i'm trying to figure out more about what can be done with the workspace dashboards and while i try to configure new graphics, after aplying the changes i sometimes see a popup:
    "Error:
    Error in the operation"
    (or something like that, the software is installed in portuguese). This is all the popup message says.
    This mesage also occurs when, from a graphic in one of the pannels, i try to communicate with a process list. I have the communication configured, but when i click in one area of the graphic pie it returns this very same error instead of drilling down the process on the list for me.
    Where can i find more detailed information about the real error?
    Thank you in advance.
    Edited by: user1997568 on 21/10/2010 09:42

    Download the patch from Oracle support..

  • Error (23317) The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks. Recommended Action The operation Change properties of virtual machine is not permitted on a virtual machine that h

    Experts !
    Error (23317)
    The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
    Recommended Action
    The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
    Is this limitation by design? If we have a shared VHDX between two VMs, then I am not able to change the VM properties from SCVMM.
    SCVMM 2012 R2 with Windows Server 2012 R2 Hyper-V.
    Appreciate any help !
    Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
    InsideVirtualization.com

    Hello,
    that is a VMM issue.
    If you did not deploy your virtual cluster from a VMM service template, VMM doesn't recognize the configuration.
    Until MS got it fixed, you could use the workaround from system center central:
    http://www.systemcentercentral.com/tag/shared-vhdx/
    This posting is provided >AS IS< with no warranties.

  • Error submitting tasks: Operation could not be completed within the specified time

    I've created a Batch Application and I'm having an issue running a job.  Its suppose to synchronize 2 azure blob containers.
    In my JobSplitter, I compare 2 azure blob containers and find the files in the first container that need to be copied over to the second one.  Just figuring out which files to copy over can take about 5 to 6 minutes the first time this is run depending
    on the number of files that need to get copied over.
    Once we have the files that need to be copied, we group them into sets and create a task for each set.
    The exe that the TaskProcessor runs doesn't do anything just yet. All it does is write the arguments sent to it into a file. Nothing major.
    On the last run, about 900 tasks were created. Four of the tasks completed successfully. I can download the output files for them just fine. The next 4 tasks failed with an error.
    Looking in the JobLogs, I see this:
    The job orchestrator finished
    Failed to process job ac8dd4a3-d882-4ec1-847d-48844fa3e1f4: Error submitting tasks: Operation could not be completed
    within the specified time. RequestId:27eab612-c8ce-4e4b-8dfb-00e7024c71ec Time:2015-01-29T00:37:03.5943898Z
    Has anyone seen this before?
    Thanks,
    matt

    This error is usually a transient error, typically related to an internal storage timeout.  We're working on a fix for it.
    In the meantime, if you go into the Batch Apps portal, select the failed job and click Reprocess in the command bar, Batch Apps should re-run the failed tasks and the not-run tasks.  (Note that the tasks that already succeeded will not be re-run, and
    we will not re-run the job splitter to create new tasks.)
    Please let us know if you continue to see this problem or if reprocessing the job doesn't work for you.

  • Bridge Crashing:  Error message "The operation could not be completed. The file is Locked

    Bridge is acting real funny lately:  It won't close, so I have to force quite, then I get the error message:  "The operation could not be completed.  The file is Locked"

    Thread 7:
    0   libsystem_kernel.dylib         0x000000010a98e136 __psynch_cvwait + 10
    1   com.adobe.bridge5             0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
    2   com.adobe.bridge5             0x00000001006ae71e boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 332350
    3   com.adobe.bridge5             0x00000001004d2c99 start + 5045481
    4   com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
    5   libsystem_pthread.dylib       0x000000010aaa3268 _pthread_body + 131
    6   libsystem_pthread.dylib       0x000000010aaa31e5 _pthread_start + 176
    7   libsystem_pthread.dylib       0x000000010aaa141d thread_start + 13
    Thread 8:
    0   libsystem_kernel.dylib         0x000000010a98e136 __psynch_cvwait + 10
    1   com.adobe.bridge5             0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
    2   com.adobe.bridge5             0x000000010066b372 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 56978
    3   com.adobe.bridge5             0x000000010066939d boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 48829
    4   com.adobe.bridge5             0x00000001004d2c99 start + 5045481
    5   com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
    6   libsystem_pthread.dylib       0x000000010aaa3268 _pthread_body + 131
    7   libsystem_pthread.dylib       0x000000010aaa31e5 _pthread_start + 176
    8   libsystem_pthread.dylib       0x000000010aaa141d thread_start + 13
    Thread 9:
    0   libsystem_kernel.dylib         0x000000010a98e136 __psynch_cvwait + 10
    1   SwitchBoardClient             0x000000011ebce948 void boost::condition_variable_any::wait<boost::unique_lock<boost::mutex> >(boost::unique_lock<boost::mutex>&) + 80
    2   SwitchBoardClient             0x000000011ebc2cc8 adobe::switchboard::ConnectionQueue::run() + 300
    3   SwitchBoardClient             0x000000011ebc78a3 boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>::operator()(adobe::switchboard::ConnectionQueue*) const + 97
    4   SwitchBoardClient             0x000000011ebc7911 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>&, boost::_bi::list0&, int) + 65
    5   SwitchBoardClient             0x000000011ebc794e boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > >::operator()() + 54
    6   SwitchBoardClient             0x000000011ebc796c boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > > >::run() + 28
    7   SwitchBoardClient             0x000000011eb632be thread_proxy + 89
    8   libsystem_pthread.dylib       0x000000010aaa3268 _pthread_body + 131
    9   libsystem_pthread.dylib       0x000000010aaa31e5 _pthread_start + 176
    10  libsystem_pthread.dylib       0x000000010aaa141d thread_start + 13
    Thread 10:
    0   libsystem_kernel.dylib         0x000000010a98e136 __psynch_cvwait + 10
    1   SwitchBoardClient             0x000000011eb66a41 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 59
    2   SwitchBoardClient             0x000000011eb89433 adobe::switchboard::Client::run() + 111
    3   SwitchBoardClient             0x000000011eb91e05 boost::_mfi::mf0<void, adobe::switchboard::Client>::operator()(adobe::switchboard::Client*) const + 97
    4   SwitchBoardClient             0x000000011eb91e49 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Client>&, boost::_bi::list0&, int) + 65
    5   SwitchBoardClient             0x000000011eb91e86 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > >::operator()() + 54
    6   SwitchBoardClient             0x000000011eb91ea4 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > > >::run() + 28
    7   SwitchBoardClient             0x000000011eb632be thread_proxy + 89
    8   libsystem_pthread.dylib       0x000000010aaa3268 _pthread_body + 131
    9   libsystem_pthread.dylib       0x000000010aaa31e5 _pthread_start + 176
    10  libsystem_pthread.dylib       0x000000010aaa141d thread_start + 13
    Thread 11:
    0   libsystem_kernel.dylib         0x000000010a98e36a __recvmsg + 10
    1   SwitchBoardClient             0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service<b oost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
    2   SwitchBoardClient             0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
    3   SwitchBoardClient             0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
    4   SwitchBoardClient             0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
    5   SwitchBoardClient             0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
    6   SwitchBoardClient             0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
    7   SwitchBoardClient             0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
    8   SwitchBoardClient             0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
    9   SwitchBoardClient             0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
    10  SwitchBoardClient             0x000000011eb632be thread_proxy + 89
    11  libsystem_pthread.dylib       0x000000010aaa3268 _pthread_body + 131
    12  libsystem_pthread.dylib       0x000000010aaa31e5 _pthread_start + 176
    13  libsystem_pthread.dylib       0x000000010aaa141d thread_start + 13
    Thread 12:
    0   libsystem_kernel.dylib         0x000000010a98e36a __recvmsg + 10
    1   SwitchBoardClient             0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service<b oost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
    2   SwitchBoardClient             0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
    3   SwitchBoardClient             0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
    4   SwitchBoardClient             0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
    5   SwitchBoardClient             0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
    6   SwitchBoardClient             0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
    7   SwitchBoardClient             0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
    8   SwitchBoardClient             0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
    9   SwitchBoardClient             0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
    10  SwitchBoardClient             0x000000011eb632be thread_proxy + 89
    11  libsystem_pthread.dylib       0x000000010aaa3268 _pthread_body + 131
    12  libsystem_pthread.dylib       0x000000010aaa31e5 _pthread_start + 176
    13  libsystem_pthread.dylib       0x000000010aaa141d thread_start + 13
    Thread 13:
    0   libsystem_kernel.dylib         0x000000010a98e136 __psynch_cvwait + 10
    1   MultiProcessor Support         0x00000001165ac113 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 139
    2   MultiProcessor Support         0x00000001165ac1d0 ThreadFunctor::operator()() + 92
    3   MultiProcessor Support         0x00000001165c8f70 thread_proxy + 160
    4   libsystem_pthread.dylib       0x000000010aaa3268 _pthread_body + 131
    5   libsystem_pthread.dylib       0x000000010aaa31e5 _pthread_start + 176
    6   libsystem_pthread.dylib       0x000000010aaa141d thread_start + 13
    Thread 14:
    0   libsystem_kernel.dylib         0x000000010a9894de mach_msg_trap + 10
    1   libsystem_kernel.dylib         0x000000010a98864f mach_msg + 55
    2   com.apple.CoreFoundation       0x0000000106e8fb34 __CFRunLoopServiceMachPort + 212
    3   com.apple.CoreFoundation       0x0000000106e8effb __CFRunLoopRun + 1371
    4   com.apple.CoreFoundation       0x0000000106e8e858 CFRunLoopRunSpecific + 296
    5   com.apple.AppKit               0x0000000101fac33b _NSEventThread + 137
    6   libsystem_pthread.dylib       0x000000010aaa3268 _pthread_body + 131
    7   libsystem_pthread.dylib       0x000000010aaa31e5 _pthread_start + 176
    8   libsystem_pthread.dylib       0x000000010aaa141d thread_start + 13
    Thread 15:
    0   libsystem_kernel.dylib         0x000000010a98e94a __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x000000010aaa140d start_wqthread + 13
    Thread 16:
    0   libsystem_kernel.dylib         0x000000010a98e94a __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x000000010aaa140d start_wqthread + 13
    Thread 17:
    0   libsystem_kernel.dylib         0x000000010a98e94a __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x000000010aaa140d start_wqthread + 13
    Thread 0 crashed with X86 Thread State (64-bit):
      rax: 0x0000000000000001  rbx: 0x0000000123d20ff0  rcx: 0x0000000023d20000  rdx: 0x0000000000000000
      rdi: 0x0000000000000000  rsi: 0x0000000000000067  rbp: 0x00007fff5fbff880  rsp: 0x00007fff5fbff870
       r8: 0x0000000111d0da00   r9: 0x0000000000000600  r10: 0x0000000012e3bdbc  r11: 0x0000000000000000
      r12: 0x0000000000000000  r13: 0x00000000000000ce  r14: 0x0000000000000067  r15: 0x0000608000018700
      rip: 0x000000010495a94d  rfl: 0x0000000000010202  cr2: 0x000000000000003c

  • When I try to move files from my mac (v10.8.5) to my external harddrive I get the error message The operation can't be completed because an unexpected error occurred (error code -50).

    When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.

    Some other things to look at.
    https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50

  • Cisco SG300 HOSTP_flash_operation: fatal error during read operation!

    I have 2 Cisco SG300-52P switches.   Earlier this week, one of them started dropping connections and POE was not working on a couple of devices...  I came in this morning to restart them when no one else was around. After restarting them, the troublesome one was still not detecting POE devices.  
    I have been waiting for some down time to do a firmware update, so I thought this might straighten things out.  I Downloaded the updated bootloader and firmware from Cisco's site.  Updating the (non-problem) SG300 went exactly as it should.  Upgrading the the bootloader on the problem SG300 went exactly as it should.  Started the firmware update on the problem switch ....... and it didn't come back online.  The power light was flashing, and occasionally the lights on ports would blink like they were trying to reset, but they never made it.   There weren't really any special configurations on this switch so I had nothing to lose by trying a factory reset via the pinhole on the front ...... same result.
    I connected to the serial port via a win7 PC with putty. .. All setting per Cisco. I got a message that the connection was detected, but it would not accept keyboard input.  I power cycled the SG300 and watched the messages go by ... It looked like everything was working.  I even got a message that the "Initialization task was completed"..
    Then this message "HOSTP_flash_operation: fatal error during read operation!"
    We have had a couple of internet and power outages recently, but I am trying to rule out other issues before blaming it on that. 
    any suggestions?
    putty output file attached

    I am not familiar with SG series products, but looking at the error message in the attached file, it appears there is an issue with reading from the flash.  It could be that the flash file is corrupted and the flash needs to be formatted and then reload the software again.
    If you have support contract on the product, I would suggest you open a TAC ticket with Cisco and have them help you.
    HTH

Maybe you are looking for

  • Using office web apps with SharePoint 2013

    Hi, I would like to use office web apps in our SharePoint 2013 environment. I would like to know if OWA has to have a dedicated server or can I install it on the SharePoint 2013 app server. Sherazad

  • IPhone 5S and Outlook 2013 no longer syncing

    Up until recently I had no issue syncing my iPhone 5S with Outlook 2013, but no longer do they do such. All software is updated; which is most likely my problem. Suggestions?

  • How to continue working on a project if I export the materials?

    Hi, I am making a web series and came accross a problem. My computer's hard drive is almost full. I am trying to cut the raw footages and the finished copy of an episode to an external hard drive. I can paste the raw footages and the finished copy of

  • Menu items grayed out in Messages.

    Most menu items are grayed out in Messages: can't access preferences or account, among others. Just upgraded to Yosemite on Mid2010 Mac Pro.

  • Correlation for multiline in NW BPM

    Hi Experts, This is related to NW-BPM not CC BPM. My flow is like : BPM (Asynch req) --> ECC ECC (asynch response) --> BPM In ECC validation is done and response (Asynch) is sent back to BPM. In BPM --> ECC flow: Request has multiple Items under a si