Error in CONFLICT_CHECK during EHP4 Installation

I have installed a new ERP system from the installation DVDs  for ERP 6.0 EHP4 Ready. As part of the post-installations  I am  installing EHP4.
I have installed the newest SPAM 7.01/39 (and Basis-SPs SAPKB70104-SAPKB70106, ...)
I generated a stackfile in solman with target stack  and added only Patch 21 for HR and EA-HR in phase BIND_PATCH.
During phase CONFLICT_CHECK I get:
ERROR> Conflicts found.
      Check log file 'SPDA_CONFLCHK.LOG' for details.
       To resolve the conflicts the current step will be repeated and you must change your Add-on or Support Package selection or add Conflict Resolution Patches (CRT).
Logfile 'SPDA_CONFLCHK.LOG': search for "EE"
2EETN219 The system found conflicts for add-on "FI-CA" release "604" (see list):
3 ETN223 Piece list "SAPKGEO01G" of already installed add-on component "IS-UT" release "600"
4 ETN225 ... has conflicts with "FI-CA" release "604" - piece list: "SAPK-604DZINFICA"
3WETN232 Conflict resolution by not installing of "FI-CA" release "604""IS-UT""600"
I don't understand the problem of EHPI: The IS-UT 600 is already in the system, and FI-CA 6.04 belongs to EHP4
Repeating the phase didn't help.....
Any ideas ?
Best regards,
Uta
Edited by: Uta Hedemann on Jun 23, 2010 9:38 PM

Hello Jane,
sounds really good! Thanks for your quick answer. I love SDN for its quick reactions !!!!
In the meanwhile I have opened a message in      BC-EHP-INS  but have no answer yet.  Do you know , if there is an official SAP-note about the solution?  I would like to be on the safe side.
ad a) How can I reinstall  the "right "SPAM-Update 7.01/39, if it is in the system  already.... ?  ( I haved used the one of the newest Solman 7.0 DVD SP 19-23.
ad b) I have checked table PATEXCPT, but the entry  ""R3TR,SFSW,CONV_INV" is missing. Will it be installed, if I somehow manage to reinstall the SPAM-Update ?
It would have  helped a lot  if a warning about a wrong SPAM-Version  was in note 822379  or somewhere else. I hope, some SAP-collegue will do it later....
Best regards,
Uta

Similar Messages

  • I am receiving an error code EX11 during CC installation from Creative Cloud

    I am receiving an error code EX11 during CC installation from Creative Cloud.

    Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
    Mylenium

  • EhP4 - EXSORT_NOT_ENOUGH_MEMORY Error during EhP4 installation on WIN32

    Hi Gurus.
    I am installing EhP4 on win32 system.
    Background:
    ERP 6.0 with EhP3 installed.
    Windows Server 2003 on 32 Bit /fastdetect /3GB /PAE
    3G enabled
    PAE enabled
    I have referred to most of the threads on the error but no luck.
    Please find error details below:
    -   Error in phase: DDIC_ACTIVATION
    -   Reason for error: TP_STEP_FAILURE
    -   Return code: 0012
    -   Error message: OCS Package SAPK-40401INEAIPPE, tp step A, return code 0012
    Runtime Errors         EXSORT_NOT_ENOUGH_MEMORY
    Date and Time          17.06.2010 20:18:40                                        
    Short text
    Internal error: Too little memory for the external sort
    What happened?
    Error in the SAP kernel. The current ABAP "RADMASDSC" program had to be terminated because the ABAP processor detected an internal system error
    SAP runtime system internal error.
    Last error logged in SAP kernel
    Component............ "EM"
    Place................ "SAP-Server esmart03_ESM_00 on host esmart03 (wp 7)"
    Version.............. 37                                                                      
    Error code........... 7
    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
    Description.......... " "                                                                     
    System call.......... " "                                                                     
    Module............... "emxx.c"                                 
    Line................. 2207
    The error reported by the operating system is
    Error number..... " "
    Error text....... " "
    The amount of storage space (in bytes) filled at termination time was:
    Roll area...................... 1709536
    Extended memory (EM)........... 386729920
    Assigned memory (HEAP)......... 1639377312
    Short area..................... " "
    Paging area.................... 65536
    Maximum address space.......... " "
    Thanks in advance for your help.
    Regards
    Shreeshail
    Edited by: Shreeshail Ganiger on Jun 18, 2010 8:28 AM

    > The amount of storage space (in bytes) filled at termination time was:
    > Roll area...................... 1709536
    > Extended memory (EM)........... 386729920
    > Assigned memory (HEAP)......... 1639377312
    You may try to offer the system more heap memory by decreasing abap/heap_area_nondia.
    Any reason why you don't use a 64bit OS? 32bit is deprecated and you may see other memory related errors...
    Markus

  • Error in PREPARE_JSPM_QUEUE during EHP4 install

    Hello,
    I'm upgrading my ECC 6.0 system to ECC 6.0 EHP4. in the JAVA configuration phase PREPARE_JSPM_QUEUE I get the following error:
    Apr 5, 2011 4:44:04 PM [Error]: Software component sap.com/SAP_JTECHF with version 7.00.21.8 is found on the system but in the stack it is listed with version 7.00.21.0.
    Apr 5, 2011 4:44:04 PM [Error]: Software component sap.com/SAP_JTECHS with version 7.00.21.14 is found on the system but in the stack it is listed with version 7.00.21.0.
    Apr 5, 2011 4:44:04 PM [Error]: Software component sap.com/LM-TOOLS with version 7.00.21.1 is found on the system but in the stack it is listed with version 7.00.21.0.
    Apr 5, 2011 4:44:04 PM [Error]: Software component sap.com/CORE-TOOLS with version 7.00.22.1 is found on the system but in the stack it is listed with version 7.00.22.0.
    Apr 5, 2011 4:44:04 PM [Error]: Software component sap.com/SAP-JEE with version 7.00.21.8 is found on the system but in the stack it is listed with version 7.00.21.0.
    I have configured the JAVA stack in the Solution Manager so the XML stack contains SP level 21 for software component SAP_JTECHS. What I donu2019t understand is how could the installer read a SP level 21.8. I didn't know the sub versions exists.
    Does anyone know how to fix this problem so I could go on with the upgrade.
    Kind regards,
    Richard Meijn

    Hello Richard,
    check the XML file generated, on the entries for SAP_JTECHF, SAP_JTECHS, LM-TOOLS, CORE-TOOLS and SAP-JEE components.
    For example:
    - <software-component>
      <caption>SAP_JTECHF</caption>
      <ppms-number>xxxxxxxxxxxxxxxxxxx</ppms-number>
      <runtime-type>J2EE</runtime-type>
      <name>XXXXXXXXXXXXX</name>
      <version>7.00</version>
      <vendor>sap.com</vendor>
    - <support-package>
      <caption>SP021 for SAP_JTECHF 7.00</caption>
      <name>SP021</name>
      <vendor>sap.com</vendor>
      <ppms-number>xxxxxxxxxxxxxxxxxxx</ppms-number>
      <sp-level>021</sp-level>
      <patch-level>0</patch-level>
    - <archives>
    You'll see on the "patch level" entry (which means the sub version you're referring to) that it should be '0' on the XML file.
    The main possibility for this is that MOPZ generated the XML file incorrectly, based on the information it fetched from the SolutionManager. This issue is occuring probably because you have an outdated information or there are missing information in transaction SMSY. Check in SMSY if the Software components for the system are up to date. If not you need send the
    system data to a SLD and use LANDSCAPE FETCH to update the JAVA data in SMSY. After have JAVA system components data updated in SMSY you must create a new mopz transaction. This new mopz transaction will not include wrong information in the XML file then.
    (remember you need a SLD to maintain the JAVA information. You can use the SLD of the solution manager. Go to the Visual Administrator of the system that you want upgrade and in SLD Data Supplier Service, maintain the User/password/host/port of the SLD of solman and trigger the service. The SLD of solman will be updated with the JAVA information of this system and after run LANDSCAPE fetch job, SMSY will be populated with JAVA information up to date. If you created manually the JAVA instances, MOPZ will not know the SOURCE software components and this will have a big impact in the calculation as MOPZ will not know the source components version.)
    Alternatively you can create a XML file manually (with the correct SP and patch levels, of course). This method is supported too, just keep in mind that if you have a ERP system that you want upgrade to EHP4 or a higher EHP version, you must
    use MOPZ. If you're implementing EHP1 in Netweaver, you can use the XML file generated in the Service Marketplace without problems.
    I hope all this information helps.
    Best regards,
    Tomas Black

  • Gns is getting failed with error CRS-2632  during RAC installation

    hello guys i am new to oracle RAC and i am trying to configure two node ORACLE 11G R2 RAC setup on OEL 5.4 using GNS Every things works great till I execute
    root.sh script on the first node
    It gives me error
    CRS-2674: Start of 'ora.gns' on 'host01' failed
    CRS-2632: There are no more servers to try to place resource 'ora.gns' on that would satisfy its placement policy
    start gns ... failed
    Preparing packages for installation...
    cvuqdisk-1.0.7-1
    Configure Oracle Grid Infrastructure for a Cluster ... failed
    Updating inventory properties for clusterware
    Starting Oracle Universal Installer...
    When i check status of cluster recourse i get this as output
    [root@host01 ~]# crs_stat -t
    Name           Type           Target      State Host
    ora.DATA.dg           ora....up.type      ONLINE ONLINE host01
    ora....N1.lsnr           ora....er.type      OFFLINE OFFLINE
    ora....N2.lsnr           ora....er.type      OFFLINE OFFLINE
    ora....N3.lsnr           ora....er.type      OFFLINE OFFLINE
    ora.asm           ora.asm.type      ONLINE ONLINE host01
    ora.eons           ora.eons.type      ONLINE ONLINE host01
    ora.gns           ora.gns.type      ONLINE OFFLINE
    ora.gns.vip           ora....ip.type      ONLINE OFFLINE
    ora.gsd           ora.gsd.type      OFFLINE OFFLINE
    ora....SM1.asm           application          ONLINE ONLINE host01
    ora.host01.gsd           application      OFFLINE OFFLINE
    ora.host01.ons           application      ONLINE ONLINE host01
    ora.host01.vip           ora....t1.type      ONLINE ONLINE host01
    ora....network           ora....rk.type      ONLINE ONLINE host01
    ora.oc4j           ora.oc4j.type      OFFLINE OFFLINE
    ora.ons           ora.ons.type      ONLINE ONLINE host01
    ora....ry.acfs           ora....fs.type      OFFLINE OFFLINE
    ora.scan1.vip           ora....ip.type      OFFLINE OFFLINE
    ora.scan2.vip           ora....ip.type      OFFLINE OFFLINE
    ora.scan3.vip           ora....ip.type      OFFLINE OFFLINE
    These are my GNS configuration file entries
    vi /var/named/chroot/etc/named.conf
    options {
         listen-on port 53 { 192.9.201.59; };
         listen-on-v6 port 53 { ::1; };
         directory      "/var/named";
         dump-file      "/var/named/data/cache_dump.db";
    statistics-file "/var/named/data/named_stats.txt";
    memstatistics-file "/var/named/data/named_mem_stats.txt";
         allow-query { any; };
         allow-query-cache { any; };
    zone "." IN {
         type hint;
         file "named.ca";
    zone "localdomain" IN {
         type master;
         file "localdomain.zone";
         allow-update { none; };
    zone "localhost" IN {
         type master;
         file "localhost.zone";
         allow-update { none; };
    zone "0.0.127.in-addr.arpa" IN {
         type master;
         file "named.local";
         allow-update { none; };
    zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN {
    type master;
         file "named.ip6.local";
         allow-update { none; };
    zone "255.in-addr.arpa" IN {
         type master;
         file "named.broadcast";
         allow-update { none; };
    zone "0.in-addr.arpa" IN {
         type master;
         file "named.zero";
         allow-update { none; };
    zone "example.com" IN {
    type master;
    file "forward.zone";
         allow-transfer { 192.9.201.180; };
    zone "201.9.192.in-addr.arpa" IN {
    type master;
    file "reverse.zone";
    zone "0.0.10.in-addr.arpa" IN {
    type master;
    file "reverse1.zone";
    vi /var/named/chroot/var/named/forward.zone
    $TTL     86400
    @          IN SOA     server1.example.com. root.server1.example.com. (
                             42          ; serial (d. adams)
                             3H          ; refresh
                             15M          ; retry
                             1W          ; expiry
                             1D )          ; minimum
         IN NS          server1
              IN A          192.9.201.59
    server1          IN A          192.9.201.59
    host01          IN A          192.9.201.181
    host02          IN A          192.9.201.182
    host03          IN A          192.9.201.183
    openfiler     IN A          192.9.201.184
    host01-priv     IN A          10.0.0.2
    host02-priv     IN A          10.0.0.3
    host03-priv     IN A          10.0.0.4
    vi /var/named/chroot/var/named/reverse.zone
    $ORIGIN cluster01.example.com.
    @     IN     NS     cluster01-gns.cluster01.example.com.
    cluster01-gns     IN     A     192.9.201.180
    $TTL     86400
    @ IN SOA server1.example.com. root.server1.example.com. (
    1997022700 ; Serial
    28800 ; Refresh
    14400 ; Retry
    3600000 ; Expire
    86400 ) ; Minimum
    IN NS server1.example.com.
    59 IN PTR server1.example.com.
    184 IN PTR openfiler.example.com.
    181 IN PTR host01.example.com.
    182 IN PTR host02.example.com.
    183 IN PTR host03.example.com.
    vi /var/named/chroot/var/named/reverse1.zone
    $TTL     86400
    @ IN SOA server1.example.com. root.server1.example.com. (
    1997022700 ; Serial
    28800 ; Refresh
    14400 ; Retry
    3600000 ; Expire
    86400 ) ; Minimum
    IN NS server1.example.com.
    2 IN PTR host01-priv.example.com.
    3 IN PTR host02-priv.example.com.
    4 IN PTR host03-priv.example.com.
    Please suggest me what i am doing wrong
    Edited by: 1001408 on Apr 21, 2013 9:17 AM
    Edited by: 1001408 on Apr 21, 2013 9:22 AM

    Hello guys finally i find mistake i was doing
    while configuring Public Ip for the nodes i was not giving Default Gateway .I was assuming as all these machine is in same network with same Ip range so they would not be needing Gateway but here my assumption mismatch with oracle well finally happy to see 11G r2 with GNS running on my personal laptop.
    cheers
    Rahul

  • Error RCU-6083 during RCU installation prior to OBIEE 11g on Solaris

    Hello,
    I have an application server where I have an Oracle Database EE 11g running on Solaris 10 upgrade 9.
    The server has the following characteristics:
    - SUN V440
    - RAM 16GB
    - 2 processors Ultra Sparc III, 1.5GHz
    - OS: Solaris version 10
    - Disk space: 500GB
    - Oracle Weblogic Server 11g (10.3)
    - Ethernet 1 Gpbs
    I want to install the RCU schemas and OBIEE 11g (11.1.1.5.0) on this server so I verified all the pre-requisites for RCU and OBIEE and are OK.
    I am using the Repository Creation Utility (11.1.1.5.0) for Microsoft Windows (32-bit) to install the RCU because although the database is running on Solaris, the installer is not working through that server so I have a PC connected to the network and through that PC that has windows7 i could run the installer and connect to the db, using the SYSTEM user (because when i select sys as sysdba, although the password is correct, it doesn't connect to the db).
    However, the installer is sending the ERROR: RCU-6083 regarding the pre-requisites for the BIPLATFORM.
    I already use the following command alter system set processes=500 and restarted the db services, however the wizard installer is still sendig that error.
    What can be done to succesfully install the RCU?
    Thanks and regards,
    Rebeca

    Hello User,
    Below my comments in blue:-
    1) Do I need to install any Oracle DB (like to install 10g) prior to running rcu.bat file?
    Yes
    2) If I install Oracle 10g DB, does if create any compatibility issue while installing OBIEE 11g?
    Check below the compatibility matrix
    Oracle Fusion Middleware Supported System Configurations
    Thanks,
    Sasi Nagireddy.

  • Error Code A12E6 during the installation of Acrobat XI Pro.  Help?

    Hi, I successfully downloaded trial version of Acrobat XI Pro, but ran into problem when I clicked Adobe Application Manager.  The dialogue says:" Sorry, there seems to be a problem with the installation process (Error Code: A12E6).  Can someone please help?

    I suggest that you ask in the appropriate Acrobat forum (this is the forum for Acrobat.com online services).  And tell them your operating system.

  • Database space problem during EHP4 installation

    hi every body
    actually i am upgrading my sap to EHP4 on DEV,
    my space assigned for MS SQL database is 125 GB(60gb free)  on Windows 2003 ,
    but at the preprocessing stage in EHPi it shows error that system needs 108GB of free space on database but i have only 60 .
    can any one tell me how is it possible to do this i am stuck here .

    Eric,
    I've a doubt here. I've come across a SAP note saying that for better performance in SQL database, we should atleast have 1:1 CPU count as that of the datafile count.
    If this is the case, we cannot go on adding new datafiles (if we have limited CPU count, say 4) but we should extend the existing datafile or the drive/FS size.
    Please correct me if I'm wrong.
    Regards,
    Varadharajan M

  • Managing Transports during EHP4 Installation

    Hi,
    Appreciate some help. We will soon be installing EHP4 in our DEV ERP system. After the installation, DEV ERP will be with EHP4 but QAS and PRD will not. Those will be installed after tests and checks have been completed. Can changes be transported across to QAS and PRD from DEV? Thanks.

    Hi Shahnaz,
    I am not able to understand by installing EHP4 but not activating.
    E.g.- If you are upgarding your SAP_Basis package to 701 then you don't need to do some extra step to activate it.
    Thanks
    Sunny

  • Satellite L850 - Error Code 0xC0000005 during Win8 installation

    Hello, i have a Satellite L850-1v3 Laptop and accidentally i destroyed my Hard drive
    Now, i'm trying to install Windows 8 in a new hard drive but it always get stuck on 89% and this error code come up "0xC0000005"
    I have tried with different Installation discs, through CDROM, usb etc
    What should i do?
    Another question that comes up, is "where can i find my Windows 8 serial key?"
    Thanks :)

    ? have a new Hard Drive
    No, i haven't the original DVDs..
    I downloaded Win8 and i have tried to install them in other machines with success..
    Windows 7 can be installed in the hard drive..So there is a problem with the Windows 8 installation in that Laptop..
    I have tried different distributions of Win8 with no success..The same error comes up

  • Error occured when during the installation of the updated Mac OS X

    This is the message i find in the logs:
    Mar 31 14:44:42 prime-de-silvas-computer /usr/sbin/ocspd: starting
    2011-03-31 14:58:46.432 Software Update[280] session:product:061-6615 didFailWithError:NSError "Error SUSessionErrorDomain 6" Domain=SUSessionErrorDomain Code=6 UserInfo={errorCode = -2; }
    I want to upgrade my McBook OS bacause i have a new i Phone and i need to upgrade the OS for me to be able to access my iphone using my MacBook.
    Any idea...
    Thanks!

    You should realize you are not in MacBook territory forum, and there are Using Mac OS X Snow Leopard, as well as for iPhone.
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/iphone
    MacBook Pro 2008+
    http://discussions.apple.com/category.jspa?categoryID=251

  • Satellite A80 - Error code 49 during recovery installation

    Hi,
    I have a Toshiba Satellite A80. The computer crashed. I inserted the Windows recovery disk and error #49 with writing problem showed up.
    I wonder what wrong with my laptop. Is it a hard drive problem?
    Can anyone help me?
    Thanks.

    Hi ClementLo,
    > error #49 with writing problem showed up.
    I dont know when you exactly get this message but theoretically it could be a problem of the HDD. Maybe it has defective sectors and should be replaced
    Can you also test the same using a Microsoft disk? Maybe the disk is scratched

  • Error code 1303 during desktop installation on Vista Home Pro

    I used the disk and I tried the one online they all do the same thing. I am signed on as an administrator.
    NOT SOLVED!!

    I have a Storm 2, 9550.

  • Long running ACT_UPG during EHP4 (SP-Stack 08)

    During EHP4 Installation after a installation of ERP 6.0 EHP4 Ready) ACT_UPG is running , but very slowly.
    In a  different system (linux on intel cpu) it took only 6 hours. In my actual system it is already running since nearly  13 hours- since 08.11.2010 04:35:58 !
    I compared the actually written logfile
    /sapmnt/D01/EHPI/abap/tmp$ wc -l SAPAA70104.D01
      588286 SAPAA70104.D01
    with that one from a finished installation on linux (with lower sp-stack than 08 and older sapehpi)
    There the file  has 1.451.798 rows, which means  that my ACT_UPG  has more than the same work to do...
    I have checked  the shadow instance: 4  batchprocesses- only one is running with RDDMASGL since 08.11.2010 04:35:58
    Add. information:
    -Database and CI are on separate hosts (solaris sparc). Both are inclued in /etc/hosts.
    - I used  sapehpi version SAPehpi_38-10005811.SAR  - SAPehpi 700 from  21.10.2010
    - I have used following settings :
    SAPehpiConsole.log:
    Enter the maximum number of batch processes during the installation:
    BATCH PROCESSES: 3
    Enter the maximum number of parallel processes during uptime:
    MAXIMUM UPTIME PROCESSES: 3
    Enter the number of parallel import processes during downtime:
    R3TRANS PROCESSES: 3
    To optimize memory usage during activation, you can use the so-called
    "memory-optimized activator". Do you want to use this possibility?
    01)  -  Yes
    02)  *  No
    : No
    Any ideas ?
    Uta
    Edited by: Uta Hedemann on Nov 9, 2010 5:34 PM

    problem solved itself. ACT_UPG is finished
    The corresponding logfile seems to be invalid for analyzing the runtime . Much more smaller than on the other system on linux....
    /sapmnt/D01/EHPI/abap/log$ wc -l SAPAA70104.D01
      617706 SAPAA70104.D01
    Good luck  for everybody who has also long run times!
    Edited by: Uta Hedemann on Nov 9, 2010 6:26 PM

  • EhP4 installation ABAP+Java addin. XPRAS Errors in SAPR-603DWINEARETAIL

    Chaps, 
    I am in the downtime phase of this EhP4 installation and the Java is running fine.  I am getting this error with the ABAP in file XPRASUPG.ELG:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    XPRA ERRORS and RETURN CODE in SAPR-603DWINEARETAIL.PDS
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    A3EEFDT_TRANSPORT 125 BRF+: <<< *** BEGIN: Content from Application Component  "LO-MD-MM"  *** >>>
    A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs (&2"46F4B99CF7CF0C0BE10000000A4248A4"/&3" ")  &1"Function RS_PROCESS_PRICAT_K003" >>>
    A3EEFDT_CORE 065 Name "RS_PROCESS_PRICAT_K003" has already been used
    A3EEFDT_TRANSPORT 026 BRF+: <<< END  : Messages for IDs (&2"46F4B99CF7CF0C0BE10000000A4248A4"/&3" ")  &1"Function RS_PROCESS_PRICAT_K003" >>>
    A3EEFDT_TRANSPORT 025 BRF+: <<< BEGIN: Messages for IDs (&2"46FF585C33511112E10000000A4248A4"/&3" ")  &1"Function RS_MAP_CIN_TO_PRICAT" >>>
    A3EEFDT_CORE 065 Name "RS_MAP_CIN_TO_PRICAT" has already been used
    A3EEFDT_TRANSPORT 026 BRF+: <<< END  : Messages for IDs (&2"46FF585C33511112E10000000A4248A4"/&3" ")  &1"Function RS_MAP_CIN_TO_PRICAT" >>>
    A3EEFDT_TRANSPORT 126 BRF+: <<< *** END  : Content from Application Component  "LO-MD-MM"  *** >>>
    A3EEFDT_TRANSPORT 034 BRF+: Object activation failed (step: "Check" )
    2EEPU133 Errors occurred during post-handling "FDT_AFTER_IMPORT" for "FDT0001" "T"
    Any suggestions?
    Regards,
    Graham

    Hi,
    In the end I ran out of patience and decided to ignore the error to get it through to the end. Later, SAP responded as follows:
    "The issue depends on a deleted function and a new function with the samename within one application. With note 1263261 the problem should be
    solved. Maybe you also have to install note 1301695 after it."
    I hope this helps,
    Regards,
    Graham

Maybe you are looking for