Error in connecting SAP r\3 6.4 to BW 7.0

hello.
try to create source system to R/3 system.
after window log in as administration appear window with RFC connection
when I try to test authorization it show error. logon is failed. but this user in BW created and Password is correct
what have I do to save that RFC connection correctly?
thank you for any advise.
BTW read B84: BW Connectivity and
link: http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
may be I understand something wrong..

in source system run tran sm59.
open my rfc destination.
try to check authorization. and its show error: incorrect login or password (try again).
user have all rights (sap_all and S_BI-WHM_RFC)
login and password correct.
what's wrong with rfc?
profile parameter auth/rfc_authority_check is set to 1.
is any solution to connect sap r/3 6.4 and sp bw 7.0?

Similar Messages

Internal server error while connecting SAP's customer financial fact sheet with iOS device

Hi all,
I am trying to connect SAP's customer financial fact sheet latest ( version 3.7) with iOS phone/iPAD (version 7.1) but it shows internal server error,
when trying to connect Neither "Gateway (direct)" nor "SMP Cloud" enabled with port 80/443.
On other hand my android devices with this app is working ok.
Trace Log is below:
2014-09-11 11:27:58.298 Debug Communication error: Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x15eef620 {NSLocalizedDescription=INTERNAL SERVER ERROR}
2014-09-11 11:27:58.295 Debug Request http://server:8010/url t finished with error Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x15eef620 {NSLocalizedDescription=INTERNAL SERVER ERROR}
response <?xml version="1.0" encoding="utf-8"?><error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance"><code>HTTP/500/E/Internal Server Error</code><message> Call of service /sap/opu/odata/sap/fincustfactsheet terminated because of an error. The following error text was processed in system NQT : The ASSERT condition was violated.The error occurred on the application server . The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system NQT in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server . You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator. </message></error>
2014-09-11 11:27:58.286 Debug [ERROR] 500:INTERNAL SERVER ERROR/Location:-[ODPRequest startSynchronous] + 1427
2014-09-11 11:27:56.239 Debug DE:Using SUP Manual User
2014-09-11 11:27:56.238 Debug DE:Get svcDoc URL http://server:8010/url
2014-09-11 11:27:56.216 Debug DE:startSAPODataRequest CompanyCodeCollection
2014-09-11 11:27:56.204 Debug DE:SAPODataAccess dealloc CompanyCodeCollection
2014-09-11 11:27:56.198 Debug DE:CustomerCardsViewController refresh
2014-09-11 11:27:52.600 Debug Logging/Tracing on
2014-09-11 11:27:19.792 Debug Communication error: Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x193f3060 {NSLocalizedDescription=INTERNAL SERVER ERROR}
2014-09-11 11:27:19.787 Debug Request http://server:8010/url finished with error Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x193f3060 {NSLocalizedDescription=INTERNAL SERVER ERROR}
response <?xml version="1.0" encoding="utf-8"?><error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance"><code>HTTP/500/E/Internal Server Error</code><message> Call of service /sap/opu/odata/sap/fincustfactsheet terminated because of an error. The following error text was processed in system NQT : The ASSERT condition was violated.The error occurred on the application server. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system NQT in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server . You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator. </message></error>
2014-09-11 11:27:19.768 Debug [ERROR] 500:INTERNAL SERVER ERROR/Location:-[ODPRequest startSynchronous] + 1427
2014-09-11 11:27:12.717 Debug timeout
2014-09-11 11:27:12.681 Debug timeintervalinminutes: 23506917 timeoutInterval: 0
2014-09-11 11:27:12.679 Debug applicationGoesToForeground
Can anyone help me how to troubleshoot this error?
Any help will be highly appreciated.
Thanks
Mahesh

are these LUNs shared or standalone?
I don't think it's really wise to have more than one DSM on the same server, so you're mixing the EVA and 3par DSMs and on 2003...
other than ensuring that HBA firmware and drivers are all up to date and DMS drivers are at the latest, not much else you can do from the host side...maybe update the storport.sys driver to the latest for that OS
are you sure that the HBAs are in fact supported/compatible with both storage back-ends? what about their driver/firmware/DSM versions - some SANs are very picky when it comes to this stuff, check the interop matrixes to find out
overall, if you don't need SAN connection to one of these storage back-ends, I suggest you get rid of it and its DSM

Error when connecting SAP CRM to SUP using JCO

Hi Gurus,
we are trying to connect SAP CRM (v 7.0 Ehp1 SP3) to Sybase Unwired Server Platform 2.0 (installed on a 64bit workstation) using JCO.
Following the instructions into the following link:
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0200/doc/html/asc1229701333453.html
and given the informationfound into the forum, we performed the following steps:
1) Copy librfc32.dll (32bit) and sapjcorfc.dll (64bit, if not an error
is thrown) to "D:\Sybase\UnwiredPlatform\Servers\UnwiredServer\lib"
2) Copy librfc32.dll (32bit) and sapjcorfc.dll (32bit) and paste them
to C:\WINDOWS\sysWOW64
3) Copy librfc32.dll (32bit) and sapjcorfc.dll (32bit)
to 'D:\Sybase\UnwiredPlatform\JDK1.6.0_24\bin'
4) Copy sapjco.jar (32bit) to
"\Sybase\UnwiredPlatform\Unwired_WorkSpace\Eclipse\sybase_workspace\mobile\eclipse\plugins\com.sybase.uep.com.sap.mw.jco_<version>\lib"
5) Copy sapjco.jar (32bit)
to "D:\Sybase\UnwiredPlatform\Servers\UnwiredServer\lib\3rdparty"
With this configuration, we are able to connect to CRM from Eclipse (Sybase Unwired Workspace) but if we open Sybase Control Center, and we go to Domains -> Connections, we select CRD connection, we go to Properties then we click on "Test connection", SCC remains stuck with no responce. This issue does not allow us to connect to Sybase-SAP
using an Ipad application (the application remains stuck the same).
We also tried to install SapGui, but with no results. Did we place the right files into the right directories? Do you have any suggestions=
Thanks in advance,
Fabio

Hi Pavani
I hope you solved your issue
Ey!.. Im also in a project where I had to connect BODS with SAP CRM, actually I havent even configured the connection, but I would really appreciate if you could share some valuable information with me.
BR
Belinda

Error in connecting SAP R/3&Load Runner thr' recording for script creation

Hi SAP Gurus!!
I am New to SAP environment.
I got the following Error
" Scripting Interface is disabled on SAP Server"
No action can be recorded on this connection.
What I try to do is:
I tried to connect the SAP R/3 (4.77 EE- IDES environment) through Load Runner (8.1 evaluation version) through recording for creating a script.
What I did at load runner :
Start Creating Script by by pressing "start recording" by giving the following options
Program to Record : SAP logon
Working Directory :C:\Program Files\SAP\FrontEnd\SAPgui
Record into action : vuser_init
and in options : enable the Auto logon by providing the details of
SAP Server name,client,username,password and language.
By pressing OK button I got the above error and it was trying to connect the SAP.
If i give manually again logon details it is loging in to SAP but it is not recording any thing.
Can any body help in this regard?
Thanks in advance
Regards,
Vam C

Hi HP
Was wondering if you can help me, I am trying to create a trouble shooting sheet for possible reasons why sap scripting fails to connect at some of our clients. We write a screen reader that consumes the sapfewse.oxc, I have implemented this in C sharp and have great results. However I constantly getting support issues that my screen reader fails to connect.
Often the problem is fixed by just enabling Scriping on the client or using RZ11, I noted that you seem to indicate, however that RZ11 is short term solution and you mentioned a permanent change.
Can you please give details on the permanent change and how one can achieve this. Could you also list any other possible reasons why connecting to scripting might fail. I will be happy to mail you my connection code for a peer review as well, I would feel more comfortable with expert stamp of approval.
Thanks
Shaun,
Your help will be much appreciated,

Error when connection SAP by RFC in VB code

Hello Guru's
VB code:
Set oFunction = CreateObject("SAP.LogonControl.1")
Set oConnection = oFunction.NewConnection
oConnection.Client = "--"
oConnection.Language = "--"
oConnection.User = "--"
oConnection.Password = "---"
oConnection.ApplicationServer = "--"
oConnection.SystemNumber = "00"
result = oConnection.Logon(0, True)
Set ofun = CreateObject("SAP.FUNCTIONS")
Set ofun.Connection = oConnection
Set func = ofun.Add("RFC_READ_TABLE")
Error information:
"Name or password is incorrect."
I can login SAP using sapgui 620 with same parameters.
Is there any language related or code page related settings I am missing
This system is China based and I am remotly accessing this application.
Please help....
Thanks & Regards
Makrand

Thanks for the reply.
Already I have checked SM59 & SM21. There is no error log.
When I have debug the program I am getting error message "Entry not found in saplogon.ini";/Error
group "RFC_ERROR_PROGRAM" but that entry is also mentioned for my system ID.
Thanks in advance...
Regrads
Makrand

Error while connect SAP from Home

Hi all Experts,
I want to connect my SAP from HOME. When I connect from OFFICE, it got connected, then Why it should not connect from Home. Is there any particular settings to get connect from Home.
& I'm getting an error while Logging to SAP System. The Error is:
partner '192.168.10.134:sapdb03' not reached.
WSAEWOULDBLOCK: Resource temporarily unavailable
Do you want to see the detailed error description?
& when I click on "YES" it shows the error detail..
what will be the possible causes for this error. Can anybody please help me out with this error.
I want to get connected from my office as well as at home also.
Pls help..!!
Thanks!
with Regards
Devinder

Hi Pawha,
This is the network connection problem, you need to do some settings if your server@home is behind a Router or something else,
I can connect from everyplace in the internet to my home. the server is within a local network of my home, through a D-LINK router. behind this router, there are many sap servers, so you need to tell the router which requests to which port should it be forward. this is called PORT MAPPING or NAT, you can google this for some more information.
And from your error messages, it shows "192.168.10.134:sapdb03' not reached", you certainly can not connect to this IP address from your office since 192.168.10.XX is a local network which belongs only to your home, it is not an internet IP address, so, you can not connect from your office unless you have done some VPN.
please try the following step:
1. NAT in router: logon to your web admin interface of your home router, mapping port number 3203 to port 3203 of host 192.168.10.134, this means every coming requests from internet to your home (port 3203), will be forwarded to host 192.168.10.134:3203, that is to say, this host will handle the this kind of sap request.
2. Make sure that you have opened the port number 3203 on any firewalls (windows itself or any products else), because 32XX is the ABAP dispatcher port, it must be opened.
3. ........umh.....I have not yet think it over, if you have troubles doing this, we can discuss for detail later.
Hope it will be helpful.
Thanks and best regards,
Nick

Error in connection SAP 2007 B PL 11 client to SQL server

Dear All,
I am using SAP 2007 B PL 11. Whenever i am doing change server on client systems and entering the SQL server name and pwd the system gives error:
Connection failed:
SQLState: '08001'
SQL Server Error: 0
[Microsoft][SQL Native Client]Unable to complete login process due to delay in opening server connection
If i directly punch the IP address of the server then it immediately shows me the company lists. When i select a company and then enter the sap user name (manager) and pwd then it takes almost 3-4 minutes to connect to the company.
Can anybody please help me out on this issue.
Regards,
Rahul

HI,
I checked it out from SAP. They said that this problem is caused when multiple network card are installed on the sap server. They gave the below mentioned solution as a workaround:
SAP Business One client (not installed on the same machine as the
license service) might take several minutes to log you on successfully due to a delay in establishing a connection with the license server.
After logon, SAP Business One functions as expected.
This is due to the fact that the server or PC on which the license server is installed has more than one network card, or there is a dial-up & VPN interface-configured server.
Note: This can happen when you install the license service on a machine with more than one network card ALREADY installed.
Installing additional network cards on a single network card machine with a license service already installed might not produce this issue.
Other terms
SAP Business One, slow, login, log-in, delay, license, server, NIC, VPN, connection.
Reason and Prerequisites
Application error.
Solution
This issue is a candidate to be resolved in a future release.
Until then, you can use one of the following workarounds:
1.Disable additional network cards in the Network Connections. Also make sure there is no dialup interface or VPN interface set up, and restart the server. Note that you can re-enable the additional network card after the restart. This will resolve the issue until the next restart.
2.Install the license server on a machine with a single network card.
3.Disable all network cards, restart the license server and then enable the network cards again.

Error in connecting sap b one

When I try to connect to sap business b one I got error.Itried refreshing the references,creating new project and passing new argument but it did not worked.The error is as follows-
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in Project1.exe
Additional information: Connection - Could not find SBO that match the connection string

Hi Dilip,
you will get this is the error when you try to run your code,when SBO is not launched.
Uninstall your client and install it.
Hope it will help you
Regards
Vishnu

Error in connecting SAP R/3

hi ,
i am trying to sap R/3 using java program as follows.
JCO.createClient("200","ALEREMOTE","aleremote","EN","ZEUS","00");
dll file is kept in windows/system32 directory.
when i excecute my program i am getting the following error.
Caught an exception:
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)
when i execute my program 3 or more times, the userid "ALEREMOTE" is locking.
i am not getting this error. please help me out in this. i am suffering with this problem since 3 days.youe help will be appreciated
thanks & regards
vasudev

hi guru,
thanks for your immediate reply.I am able to login from SAP GUI.I want to tell you one important point here that when i run my program 3 times the userid is locking. means SAP is able to able to identify the user but the password is not matching .(i.e is not able to encode the password whatever we are sending from the program).
the same password and username when i give from SAP GUI, it is working please help me out.
thanks & regards
vasu

HTTP 401 error while connecting SAP PI 7.1 with SOAPAdapter

Hello,
I am trying to call webservice on R/3 system using SAP PI 7.1 but I am getting HTTP 401 error.
Following is the error for more detail:
Message: Server returned error code = 401 for URI : http://sapxx03x:50000/XISOAPAdapter/MessageServlet?channel=:BS_xxxxxxxxxxx_50:CC_xxxxxxxxxxxxx_WSDL_Sender.
same url when I use with SAP XI 3.0 it works fine. It is only giving problem with PI 7.1
I know this issue is related to authentication but what problem I am facing is how to pass the credentical with the url to
resolve this authentication issue? Are there any settings I am missing? or Any other way of doing it?
I have already tried following things to resolve this issue:
1. tried giving user id & password in URL but still having same error HTTP 401.
2. tried one of the SAP note (891877) regarding Netweaver Administration to change ROLE settings but problme still persist.
3. Checked SAP Help settings
4. Did changes to web.xml file to comment the security part and restarted the system
But, Problem still exist.
Please let me know what will be the solution for this issue.
Thanks,
Anand

Hello Abhishek,
Fine I will try using new URL but user id & password are working fine with PI 7.1.
I tried running URL directly and it is working fine and giving following message:
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.adapter.soap.web.MessageServlet (Version $Id: //tc/xpi.adapters/NWxx_xx_xxx/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of $Proxy45_10002
ModuleProcessorRemote not instantiated
Any other pointers,
Thanks,
Anand

Error while Connecting report Best Practices v1.31 with SAP

Hello experts,
I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
The most interesting is I have already one of the reports connected to SAP info sets.
I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
Here goes what Crystal Reports throws to me after changing the data source to SAP:
For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
- Database connector error: RFC_INVALID_HANDLE
For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: check class for selections raised errors - click ok then
- Database connector error: RFC_INVALID_HANDLE
Obs.: Those "Z" infosets are already created in SAP environment.
The one that works fine is one of the Purchasing Analysis reports:
- Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

Error while connecting for Java to SAP

Hi All,
I am encountering the following error while connecting from Java to SAP through JCO:
RFC_ERROR_LOGON_FAILURE: You are not authorized to logon to the target system
I have checked the connection string and everything appears to be fine.
Please let me know what the problem is.
Regards,
Rupesh.

Hi rupesh,
See this thread:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
Regards, Suresh KB

Error while connecting to SAP Server from Windows XP Client.

Hi,
I am facing the problem while i am trying to connect my Windows XP Clients( With Service Pack 3, DI-API Installed and Microsoft SQL Server Native Client Installed) to SAP server i got follwoing Error.
Connection Failed :
SQL State : '08001'
SQL Server Error : 233
[Microsoft][SQL Native Client]Named Pipe Provider Could not open the connection SQL Server [233].
Connection Failed :
SQL State : "HYT00"
SQL Server Error : 0
[Microsoft][SQL Native Client]Login Timeout Expired
Connection Failed:
SQL State :'08001'
SQL Server Error : 233
[Microsoft][SQL Native Client]An Error has occured while establishing new connection to the server.
When connecting SQL Server 2005, this failure may caused by the fact that under the default setting SQL Server does not allow remote connection.
Regards,
Arpit Shah

Hi Arpit,
Solution of Error in starting B1 after installation should help here too.
Kind regards
Mario
SAP Business One Forums team

Error while connecting microsoft Excel to sap business objects

Hi,
I am trying to connect sap business objects to Microsoft Excel using Power Query add in but i am getting Proxy time out connection error when adding
Credentials, As per the SAP documents i am using SAP Restful Web service URL when connecting to Business objects
Details are as follows:
Opearting System-:Windows 7
SAP BO Platform-:BO 4.0 SP 6 (OS-Windows server 2008 R2)
Excel Version-:Microsoft Excel 2013
ADD IN-:Power Query
Please check attach Error Screen-Shot for Detail information
Regards,
Rupesh

Hi,
please be aware that you need SAP BI 4.1 SP2 at least for using Power Query
So maybe this error results in a non suported Environment.
Regards
-Seb.

Error 2032 in SAP Netweaver BI Connection

I am using an xcelsius dashboard through a BICS connection. I am able to connect to a BEx query and publish this dashboard to SAP BW system. I also able to launch this dashboard in IE and everything works fine for next 30 min. I am able to go to multiple tabs in the dashboard and trigger various queries etc. However, after exactly 30 min, I get the error 2032. The exact error text says:
An error has occurred.
For more information, contact the file creator or your system administrator.
Error: Error #2032
Connection Type: SAP NetWeaver BI Connection
I am unable to find any such settings on the BW server side which can break the connection after 30 min. Also, BO is not involved as it's published on BW server itself. So, I am confused about what could be the reason and how to fix it.
Thanks in advance for your help.
Regards
Akhilesh

Hi All,
We were getting the same issue (Error #2032, while connecting to Bex query from DashboardDesign tool, "The First Post"),
The issue got resolved by installing "patch 14 for DashboardDesign 4.0 SP2".
You guys can try the same.
Thanks
Riyaz

Error in connecting SAP r\3 6.4 to BW 7.0

Similar Messages

Maybe you are looking for