Error in connecting to maintenance page

Hello, I'm using Broadband-wireless router Model
BEFW11S4 - v4.
I'm using VDSL connection with the router
(the VDSL modem can connect to ISP by itself)
so the router is operated like a switching HUB w/wireless capablity,
and the configuration is worked well, but someday It gone.
so I tried to connect to maintenance page but It didn't work;
after sereval hours of struggling, I got some facts:
1. ping test to host 192.168.1.1 didn't say "no such server"
                                  but "Req. time out"
2. when connect the modem to Downstream 1, and all other clients
  are connected to other downstream port, anyway, the net is shared.
  (and the IP of computer is same as the modem is directly
   connected to client computer.)
3. when connect the modem to upstream(internet), and all other clients
  are connected to other downstream port, the router build its
  inter-network, assigned internal IP address, and all the thing looks
  no problem... but the net is not shared.
I'm waiting your sincere help..
thanks.

what ip add do u get with the computer directly connected to the modem ?? also , if u cannot ping 192.168.1.1 , ensure that the firewall on that computer is turned off...go to the LAN card's properties and reduce its Link Speed to 10 Mbps half mode ....
if nothing works , reset the router for a minute and do a power cycle....try to ping again ..

Similar Messages

  • When i connect to a wifi netwrok it connects just fine ..but the login page doesn't load and then i get the error cannot connect to login page because to many redirects occured

    when i connect to wifi  network the login page doesn't load and an error msg pops up sayin login page can't open because too many redirects occured and i get the same exact error msg with safari over wifi and with any application connecting to a wifi ( windows live messenger, skype, yahoo....)
    can anyone help me plz??
    thanks

    I got the same error the other day.  I'm not 100% sure what it is but I turned WiFi off, then back on again, and reconnected without the error.

  • ACE maintenance page for HTTPS connection (non offloaded mode)?

    Hello experts
    how do we configure a "redirected" maintenance page for HTTPS Serverfarm when the serverfarm is down/probefailed?
    lets say users are accessing https://xyz.com, and if the serverfarm is down, I want users to get redirected to https://abc.com or even http://abc.com
    (getting a certificate error or a https to http redirection error is acceptable)
    What i understand from TAC, since we are not terminating SSL on ACE, we have few restrcitions on using redirect. Thereafter, TAC hasnt been too helpful on this query.
    HTTPS connection is directly terminated on Server with certificate.  And we are using SSL Session Stickyness on ACE  (I know not the best thing to do..)
    Pls. assist.

    so do i assume there is no way to do this without using ACE for SSL termination?
    In our case, not using ACE for termiating SSL connections is to draw a line between Network and System administration, a business requirement.
    Thanks for your replies.

  • Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

    Hi,
    Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
    This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
    BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
    Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
    Cheers!

    Hi E.SWARD ,
    My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
    Cannot connect to the server or database.
    I am getting the similar error , if i use Tabular analysis server instance .
    Subhash

  • Error while connecting to the database from a JSP Page

    Hi,
    I am using a simple JSP page which is based on the sample JSP pages from OTN.
    When I try to connect to my database using the following code:
    InitialContext ic = new InitialContext();
    OracleDataSource ds = (OracleDataSource)ic.lookup("jdbc/OTN9iDS");
    m_connection = ds.getConnection();
    I get the following error:
    Naming exception Error while connecting to the database : javax.naming.NameNotFoundException: jdbc/OTN9iDS not found in JDBCTest-JDBCTestProject-webapp
    Does anybody know wht this is happening?
    Any help would be appreciated
    FRank

    Hi Frank,
    Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
    If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
    Ensure the case of the JNDI lookup string, since, it is case sensitive.
    Hope this helps.
    Abhijeet

  • I am getting error "The connection to the server was reset while the page was loading" whenever i am trying to view one perticular page asset?.

    Hi Experts,
    i am getting  error "The connection to the server was reset while the page was loading" whenever i am trying to view one perticular page asset. i am directly view page asset through contribute editor. Please tell me what is the issue.
    Thanks
    Satya

    Hello.
    Can you provide more details? Is there more information in the logs (what's the stacktrace)? What version are you working with?
    Regards,
    Raul.

  • Fresh install: Discussion Board item "alert me" errors Web Parts Maintenance Page

    This happens on a freshly installed Sharepoint 2013 Foundation standalone server.
    I create a standard Discussion board app and add a discussion post. I enter the post, and use the "alert me" option (under the post, not in the top ribbon). I hit ok on the alert settings and get the "sorry, something went wrong"
    page. Doesn't matter what user tries to use the "alert me" option, same error occurs. Doesn't matter if I create a new web application or site collection, Discussion board always does this. Just to note, even though there is an error, the alert is
    still created.
    An unexpected error has
    occurred.
    Web
    Parts Maintenance Page: If you have permission, you can use this page to
    temporarily close Web Parts or remove personal settings. For more information,
    contact your site administrator.
    Application error when access /Lists/tax discussion/Flat.aspx, Error=Value does not fall within the expected range.
    at Microsoft.SharePoint.SPContentTypeId..ctor(String id)   
    at Microsoft.SharePoint.SPViewContext.get_FolderContentTypeId()  
    at Microsoft.SharePoint.WebControls.ViewSelectorMenu.AddMenuItems()  
    at Microsoft.SharePoint.WebControls.ToolBarMenuButton.CreateChildControls()  
    at Microsoft.SharePoint.WebControls.ViewSelectorMenu.CreateChildControls()  
    at System.Web.UI.Control.EnsureChildControls()   
    at Microsoft.SharePoint.WebControls.TemplateBasedControl.OnLoad(EventArgs e)  
    at Microsoft.SharePoint.WebControls.ToolBarMenuButton.OnLoad(EventArgs e)  
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.AddedControl(Control control, Int32 index)  
    at Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.CreateChildControls()  
    at Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.CreateChildControls()  
    at System.Web.UI.Control.EnsureChildControls()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    System.ArgumentException: Value does not fall within the expected range. 
    at Microsoft.SharePoint.SPContentTypeId..ctor(String id)   
    at Microsoft.SharePoint.SPViewContext.get_FolderContentTypeId()  
    at Microsoft.SharePoint.WebControls.ViewSelectorMenu.AddMenuItems()  
    at Microsoft.SharePoint.WebControls.ToolBarMenuButton.CreateChildControls()  
    at Microsoft.SharePoint.WebControls.ViewSelectorMenu.CreateChildControls()  
    at System.Web.UI.Control.EnsureChildControls()   
    at Microsoft.SharePoint.WebControls.TemplateBasedControl.OnLoad(EventArgs e)
    at Microsoft.SharePoint.WebControls.ToolBarMenuButton.OnLoad(EventArgs e)  
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.AddedControl(Control control, Int32 index)  
    at Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.CreateChildControls()  
    at Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.CreateChildControls()
    at System.Web.UI.Control.EnsureChildControls()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Control.PreRenderRecursiveInternal()   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

    This issue is known by Microsoft but there is no ETA on a fix. My case for this issue was closed a few days ago on this problem.
    Trevor Seward, MCC
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I am using Ipad 2, Wi-Fi is connected but cant open any web-site " error : Safari cannot open the page because it is not connected to the internet "

    I am using ipad 2, Wi-Fi is connected but cant open any web-site " error : safari cannot open the page becasue it is not connected to the internet "
    need support please

    You haven't provided much information, such as what type of router you have?  If you entered the encryption key as the password as opposed to the router name you have selected?  If you have WEP or WPA?  What you've tried that didn't work, other than saying it doesn't work?  So, below is a link to some assistance.  Follow this and see if it helps you.........
    http://www.apple.com/support/ipad/assistant/wifi/

  • Error during connect to the instance Content Server MAXDB-XSERVER Receive

    We rebooted this mornning a PROD Instance with SAPDB!
    Second Instance is a Content Server. Now, we got an error during connect via
    DBM Gui to Maxdb 7.6.06.04
    2011-08-19     10:06:32     577 ERR     11926     XSERVER Receive packet, Ref:8 - socket recv error (110:Connection timed out
    Environment variable : 1. Insctance PROD
                                         2. Instance  Prod Content Server
    We couldnt connect to the database Instnce via DBMgui and also DB50 all collected data are visible, but its possible to start
    DBACOCKPIT, analyse DB analyser : Message
    Info Size of data cache 260306 pages, 99.98% in use, size of converter cache 1762 pages
    Its seems so regarding to the Info of DB Analyser: Instance CSP (sap1) is up since 2011-06-10 12:20:10 that the Content server
    didnt recognize that there was a boot this morning!!
    In DBACOCKPIT it seems to be o.k. ! We could not boot the PROD Host asap again, because of the maintenance time window!
    Where we could check more featur. of the content server. The processes seems to be o.k.!

    > Near the same problem occurs on our backup content server MAXDB!
    > The backup runs during this situation a expanded longer time as normal. I get in DBM Gui today always the error code -4 socket recieve error, the Icon goes green, but there isnt any possibility to analyse the check area -> Diagnosis Files, to improof the status via gui! Via tc DBACOCKPIT i could connect to the instance and get some data! For example, If i try to stop the DB analsyser, its not possible.
    I would stop the full gui and also end all dbm*.exe processes in the task manager and start it new.
    Markus

  • Creating new Data Source Error - Database connection Failed

    Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
    Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
    Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
    SQL server 2005 is on the same physical server.
    The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
    The server event viewer shows these errors.
    "Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
    Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
    The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
    Any help is appreciated.

    Datasource for the application.
    I have created a sql db for this planning application (my datasource). See my first message for more details.
    When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
    So, "To create, edit or delete data sources, click Manage Data Source."
    This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
    SCREEN INFO BELOW
    Fields displayed with an asterisk (*) are mandatory.
    Data Source Name *:
    Data Source Description:
    Select Database Platform
    Microsoft SQL Server
    Application Database
    Server * :
    Port * :
    Database *:
    User *:
    Password *:
    Click "Validate Database Connection"
    ERROR ---> Database connection failed.
    So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
    Thanks in advance.

  • Error when connecting to portal from some machines

    Hi all,
    Can anyone help me with this.
    I get this jserver error when connecting to portal from some
    client machines.
    I works fine from the others. Any ideas?
    This is the error I get:
    [08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
    label=73 url=http://odeceixe:81/pls/portal30/!
    PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
    [08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
    Unexpected Exception, name=content-fetcher5
    java.io.EOFException: Premature EOF encountered
         at HTTPClient.StreamDemultiplexor.read
    (StreamDemultiplexor.java, Compiled Code)
         at HTTPClient.RespInputStream.read(RespInputStream.java,
    Compiled Code)
         at java.io.InputStream.read(InputStream.java:95)
         at java.io.InputStreamReader.fill
    (InputStreamReader.java:163)
         at java.io.InputStreamReader.read
    (InputStreamReader.java:239)
         at oracle.webdb.page.ContentFetcher.run
    (ContentFetcher.java, Compiled Code)

    Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

  • Upload to Blurb fails after exactly 30 minutes (There was an error uploading your book's pages...)

    After exactly 30 minutes after the upload has started, I get this error:
    There was an error uploading your book's pages.  Would you like to try again?  The choices given are "Retry Upload" and :"Cancel"
    When I retry, the same thing happens - fails after exacly 30 minutes.  I am using a window 7 pc (with Service Pack 1) and using Lightroom 5.4.  I have turned off my firewall and antivirus programs, rebooted, and connected directly to my router (not wireless) and ensuring my pc does not go to sleep, but did nothing I try wil help. 
    Anyone else get this?  Any ideas?  Thanks!

    Hello,
    I had this problem as well - the upload to Blurb would not work. Creation of a PDF and export as JPEG in the book module worked.
    For me, the solution was to turn off the Windows Firewall while uploading. Now it works!
    Two-in-Love (Photographe de Mariage en Suisse Romande)
    http://www.two-in-love.ch

  • IWS 6.0 Error accepting connection -5994

    Any idea about the reason of the following error on iPlanet Web Server 6.0 on Solaris 7:
    Error accepting connection -5994,oserr=130 (Software caused connection abort)
    Thank you.

    Hi Chris,
    Thanks so much for the link. It provided me with more information on the problem. However, for my case, the error could not be ignored as my users were affected.
    Everytime the error appeared in our log, it seems that one of my users will get a blank browser page or the browser stops loading.
    Anyway, I increased some of the kernel parameters, mainly those dealing with threads and open files and the error code has now changed! :-(
    Its now:
    failure (10054): Error accepting connection -5974, oserr=233 (Insufficient resources)
    Note the error code 10054 , when previously, the error code was 14597. We've just started seeing the errors and waiting to see if any users are affected.
    Any idea where I can more information on these error codes?

  • Error when connecting to auxiliary instance

    Hi,
    I have set up an auxiliary database to do a DUPLICATE. The auxiliary instance is started in NOMOUNT mode.
    When i try to connect from RMAN i get the following error:
    RMAN>connect auxiliary sys/<password>@<sid>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-04006: error from auxiliary database: ORA-00600: internal error code, arguments: [15435], [SYS], [X$DBMS_BACKUP_RESTORE], [], [], [], [], []
    ORA-04031: unable to allocate 1040 bytes of shared memory ("shared pool","X$DBMS_BACKUP_RESTORE","PL/SQL DIANA","PAR.C:parapt:Page")
    RMAN-04015: error setting target database character set to WE8MSWIN1252
    Environment is 10.2 on Windows
    any clues??
    Regards
    Rolf

    Hi all and thanks for your response,
    RMAN client is 10.1.0.3.0. Auxiliary instance is 10.2.0.3 (same as target).
    I modified auxiliary init.ora with:
    SHARED_POOL_SIZE=64M
    I had created the auxiliary instance as said in the manual (I think), using orapwd, oradim, creating a init.ora file, etc.
    I don't remember that SHARED_POOL_SIZE was mandatory for the init.file of the auxiliary instance...
    However, i restarted the instance (nomount), and now I can connect the auxiliary instance from RMAN :)
    However; i was going to create a duplicate database useing the DUPLICATE command. Everything went smoothly, all datafiles restored to correct path, but when RMAN finaly was trying to CREATE CONTROLFILE... I hit this error:
    SQL-setning: CREATE CONTROLFILE REUSE SET DATABASE "W558DUP" RESETLOGS NOARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 200
    MAXINSTANCES 8
    MAXLOGHISTORY 77312
    LOGFILE
    GROUP 1 ( 'D:\ORACLE\ORADATA\W558DUP\REDO01.LOG' ) SIZE 16 M REUSE,
    GROUP 2 ( 'D:\ORACLE\ORADATA\W558DUP\REDO02.LOG' ) SIZE 16 M REUSE,
    GROUP 3 ( 'D:\ORACLE\ORADATA\W558DUP\REDO03.LOG' ) SIZE 16 M REUSE,
    GROUP 4 ( 'D:\ORACLE\ORADATA\W558DUP\REDO04.LOG' ) SIZE 16 M REUSE,
    GROUP 5 ( 'D:\ORACLE\ORADATA\W558DUP\REDO05.LOG' ) SIZE 16 M REUSE
    DATAFILE
    'D:\ORACLE\ORADATA\W558DUP\SYSTEM01.DBF'
    CHARACTER SET WE8MSWIN1252
    frigitt kanal: TSM
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 08/25/2008 04:20:19
    RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE
    failed
    ORA-00600: internal error code, arguments: [kccscf_1], [9], [77312], [65535], []
    RMAN>
    I find Bug 4877360 (*'Create controlfile command in 10.2 compatibility mode results in an ORA-600 [kccscf_1]*') on metalink, confirmed in 10.2.0.3 (my version) and fixed in 10.2.0.4, and there is a patch (Patch 4877360)
    but not for Windows as far as i can see...
    I also tried the CREATE CONTROLFILE ( referencing all datafiles) from sql*plus but got the same error.
    My auxiliary init.ora files contain the COMPATIBLE=10.2.0.3.0 parameter.
    Could I set compatibility to, say 10.1 (since the bug reference the 10.2 compatibility mode) ??
    Regards
    Rolf

  • Error: Timeout occurred whilst retrieving page meta data.????

    Hi,
    I sucessfully enabled SSL on PORTAL 3.0.9.8.0 but I could only use it inside our firewall. This is because I had my servername setup to be "portal" instead of a valid DNS name like "portal.mycomp.com".
    I have changes my servername from "portal" to "portal.mycomp.com" in all the conf. files that I know of and it still doesn't work. The funny thing is that I can access the single-sign-on server but not portal. For example, #1 of the following doesn't work but #2 works.
    #1: https://portal.mycomp.com/pls/portal30
    #2: https://portal.mycomp.com/pls/portal30_sso
    This is the error msg I got from my browser when I try to go to #1 ---> "Error: Timeout occurred whilst retrieving page meta data."
    I had also made sure that I didn't have any typo when I executed the ssodatan script. The following is how I executed my ssodatan script:
    ssodatan -w https://portal.mycomp.com/pls/portal30/ -l https://portal.mycomp.com/pls/portal30_sso/ -s portal30 -o portal30_sso -c portal
    *note: "portal" is my connect string.
    Does anyone have any idea what my problem would be?
    Yes, I have also re-requested a new SSL Certificate from Varisign with the new servername "portal.mycomp.com" and installed it properly.
    Thanks in advance,
    Victoria.

    Victoria,
    Did you find a solution to this ?
    We are running Oracle Portal 3.0.9.8.1 on Solaris and are having
    the same problem. Everything works okay through http but with
    https:
    1. https://<domain name>/pls/portal30
    we get the error "Error: Timeout occurred whilst retrieving page
    meta data."
    2. https://<domain name>/pls/portal30_sso - works okay
    3. https://<domain name>/test.jsp - works okay
    Thanks
    Simon.

Maybe you are looking for