Error in connection SAP 2007 B PL 11 client to SQL server
Dear All,
I am using SAP 2007 B PL 11. Whenever i am doing change server on client systems and entering the SQL server name and pwd the system gives error:
Connection failed:
SQLState: '08001'
SQL Server Error: 0
[Microsoft][SQL Native Client]Unable to complete login process due to delay in opening server connection
If i directly punch the IP address of the server then it immediately shows me the company lists. When i select a company and then enter the sap user name (manager) and pwd then it takes almost 3-4 minutes to connect to the company.
Can anybody please help me out on this issue.
Regards,
Rahul
HI,
I checked it out from SAP. They said that this problem is caused when multiple network card are installed on the sap server. They gave the below mentioned solution as a workaround:
SAP Business One client (not installed on the same machine as the
license service) might take several minutes to log you on successfully due to a delay in establishing a connection with the license server.
After logon, SAP Business One functions as expected.
This is due to the fact that the server or PC on which the license server is installed has more than one network card, or there is a dial-up & VPN interface-configured server.
Note: This can happen when you install the license service on a machine with more than one network card ALREADY installed.
Installing additional network cards on a single network card machine with a license service already installed might not produce this issue.
Other terms
SAP Business One, slow, login, log-in, delay, license, server, NIC, VPN, connection.
Reason and Prerequisites
Application error.
Solution
This issue is a candidate to be resolved in a future release.
Until then, you can use one of the following workarounds:
1.Disable additional network cards in the Network Connections. Also make sure there is no dialup interface or VPN interface set up, and restart the server. Note that you can re-enable the additional network card after the restart. This will resolve the issue until the next restart.
2.Install the license server on a machine with a single network card.
3.Disable all network cards, restart the license server and then enable the network cards again.
Similar Messages
-
Error while executing SSIS package which contains Script component through SQL Server Agent Job
Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94 Code: 0xC0047062 Source: Insert TLM Headers Script Component [205] Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs. Server stack trace: at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94 Code: 0xC0047022 Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankajdomain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter -
Internal server error while connecting SAP's customer financial fact sheet with iOS device
Hi all,
I am trying to connect SAP's customer financial fact sheet latest ( version 3.7) with iOS phone/iPAD (version 7.1) but it shows internal server error,
when trying to connect Neither "Gateway (direct)" nor "SMP Cloud" enabled with port 80/443.
On other hand my android devices with this app is working ok.
Trace Log is below:
2014-09-11 11:27:58.298 Debug Communication error: Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x15eef620 {NSLocalizedDescription=INTERNAL SERVER ERROR}
2014-09-11 11:27:58.295 Debug Request http://server:8010/url t finished with error Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x15eef620 {NSLocalizedDescription=INTERNAL SERVER ERROR}
response <?xml version="1.0" encoding="utf-8"?><error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance"><code>HTTP/500/E/Internal Server Error</code><message> Call of service /sap/opu/odata/sap/fincustfactsheet terminated because of an error. The following error text was processed in system NQT : The ASSERT condition was violated.The error occurred on the application server . The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system NQT in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server . You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator. </message></error>
2014-09-11 11:27:58.286 Debug [ERROR] 500:INTERNAL SERVER ERROR/Location:-[ODPRequest startSynchronous] + 1427
2014-09-11 11:27:56.239 Debug DE:Using SUP Manual User
2014-09-11 11:27:56.238 Debug DE:Get svcDoc URL http://server:8010/url
2014-09-11 11:27:56.216 Debug DE:startSAPODataRequest CompanyCodeCollection
2014-09-11 11:27:56.204 Debug DE:SAPODataAccess dealloc CompanyCodeCollection
2014-09-11 11:27:56.198 Debug DE:CustomerCardsViewController refresh
2014-09-11 11:27:52.600 Debug Logging/Tracing on
2014-09-11 11:27:19.792 Debug Communication error: Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x193f3060 {NSLocalizedDescription=INTERNAL SERVER ERROR}
2014-09-11 11:27:19.787 Debug Request http://server:8010/url finished with error Error Domain=HTTPRequestErrorDomain Code=11 "INTERNAL SERVER ERROR" UserInfo=0x193f3060 {NSLocalizedDescription=INTERNAL SERVER ERROR}
response <?xml version="1.0" encoding="utf-8"?><error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance"><code>HTTP/500/E/Internal Server Error</code><message> Call of service /sap/opu/odata/sap/fincustfactsheet terminated because of an error. The following error text was processed in system NQT : The ASSERT condition was violated.The error occurred on the application server. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system NQT in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server . You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator. </message></error>
2014-09-11 11:27:19.768 Debug [ERROR] 500:INTERNAL SERVER ERROR/Location:-[ODPRequest startSynchronous] + 1427
2014-09-11 11:27:12.717 Debug timeout
2014-09-11 11:27:12.681 Debug timeintervalinminutes: 23506917 timeoutInterval: 0
2014-09-11 11:27:12.679 Debug applicationGoesToForeground
Can anyone help me how to troubleshoot this error?
Any help will be highly appreciated.
Thanks
Maheshare these LUNs shared or standalone?
I don't think it's really wise to have more than one DSM on the same server, so you're mixing the EVA and 3par DSMs and on 2003...
other than ensuring that HBA firmware and drivers are all up to date and DMS drivers are at the latest, not much else you can do from the host side...maybe update the storport.sys driver to the latest for that OS
are you sure that the HBAs are in fact supported/compatible with both storage back-ends? what about their driver/firmware/DSM versions - some SANs are very picky when it comes to this stuff, check the interop matrixes to find out
overall, if you don't need SAN connection to one of these storage back-ends, I suggest you get rid of it and its DSM -
Error in connecting SAP r\3 6.4 to BW 7.0
hello.
try to create source system to R/3 system.
after window log in as administration appear window with RFC connection
when I try to test authorization it show error. logon is failed. but this user in BW created and Password is correct
what have I do to save that RFC connection correctly?
thank you for any advise.
BTW read B84: BW Connectivity and
link: http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
may be I understand something wrong..in source system run tran sm59.
open my rfc destination.
try to check authorization. and its show error: incorrect login or password (try again).
user have all rights (sap_all and S_BI-WHM_RFC)
login and password correct.
what's wrong with rfc?
profile parameter auth/rfc_authority_check is set to 1.
is any solution to connect sap r/3 6.4 and sp bw 7.0? -
Error when connecting SAP CRM to SUP using JCO
Hi Gurus,
we are trying to connect SAP CRM (v 7.0 Ehp1 SP3) to Sybase Unwired Server Platform 2.0 (installed on a 64bit workstation) using JCO.
Following the instructions into the following link:
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0200/doc/html/asc1229701333453.html
and given the informationfound into the forum, we performed the following steps:
1) Copy librfc32.dll (32bit) and sapjcorfc.dll (64bit, if not an error
is thrown) to "D:\Sybase\UnwiredPlatform\Servers\UnwiredServer\lib"
2) Copy librfc32.dll (32bit) and sapjcorfc.dll (32bit) and paste them
to C:\WINDOWS\sysWOW64
3) Copy librfc32.dll (32bit) and sapjcorfc.dll (32bit)
to 'D:\Sybase\UnwiredPlatform\JDK1.6.0_24\bin'
4) Copy sapjco.jar (32bit) to
"\Sybase\UnwiredPlatform\Unwired_WorkSpace\Eclipse\sybase_workspace\mobile\eclipse\plugins\com.sybase.uep.com.sap.mw.jco_<version>\lib"
5) Copy sapjco.jar (32bit)
to "D:\Sybase\UnwiredPlatform\Servers\UnwiredServer\lib\3rdparty"
With this configuration, we are able to connect to CRM from Eclipse (Sybase Unwired Workspace) but if we open Sybase Control Center, and we go to Domains -> Connections, we select CRD connection, we go to Properties then we click on "Test connection", SCC remains stuck with no responce. This issue does not allow us to connect to Sybase-SAP
using an Ipad application (the application remains stuck the same).
We also tried to install SapGui, but with no results. Did we place the right files into the right directories? Do you have any suggestions=
Thanks in advance,
FabioHi Pavani
I hope you solved your issue
Ey!.. Im also in a project where I had to connect BODS with SAP CRM, actually I havent even configured the connection, but I would really appreciate if you could share some valuable information with me.
BR
Belinda -
we are getting error while refreshing connection on excel sheet which containing data from data source in form of power pivot.
error is "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:"
I am confused about Configuring the Analysis Service in SharePoint Mode.
What account should be used for Configuring the Analysis Service in SharePoint Mode?
what are the steps and what permissions are required and where to add it?
can you please explain in detail so i can make sure about my account permission properly in my environment?
Do we need to install Analysis service on sharepoint server box or not? if yes, then what are steps to follow it?
it is mentioned here to have two services are running under manages services under sharepoint central,
https://msdn.microsoft.com/en-us/library/jj682085.aspx#bkmk_verify_powerpivot
but we don't have SQL Server Analysis Services
running under Manage
services on server.
what need to be done here to fix this issue ?
Thanks,
Deepak PatelHi Deepak,
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Meanwhile, could you please check if there is any related ULS log for help troubleshoot the issue when error occurs.
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/04/02/powerpivot-for-sharepoint-manual-data-refresh-failing.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I am getting following error while refreshing connection on excel sheet in power pivot gallery,
my scenario,
using BISM file connection to create and refresh power pivot excel sheet in power pivot gallery
throws error and we have sql server 2014 CU6 updated installed plus sharepoint 2013. i checked following msolap110.dll is available in our environment but assembly
Microsoft.AnalysisServices.ChannelTransport is not available.
i found error in event viewer,
"Activation context generation failed for "C:\Program Files\Microsoft Analysis
Services\AS OLEDB\110\msolap110.dll". Dependent Assembly
Microsoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
what should i do to fix it?
Thanks for help.
Deepak PatelRebecca,
yes, this is issue i am getting.
Activation
context generation failed for "C:\Program
Files\Microsoft Analysis Services\AS OLEDB\110\msolap110.dll".
Dependent AssemblyMicrosoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
let me know if you can find fix for it.
THanks, -
Problem with services of SAP after installation of ABAP on MS SQL server
Hi,
I am trying top install 2004 Netweaver ABAP+ JAVA on my machine
Following is my machine configuration -
Machine type - Windows 2003 Standard Edition SP1
Machine name - pun-idmqa-vm1
SAP Instance name - QSA
DB type - MS SQL 2000 SP4 + hotfixes and instcoll.exe is executed. After nstalling SQL shows server proper as SQL_Latin1_General_CP850_BIN2 collation
Message port - 3600
I could sucessfully install Database from CD and thereby could sucessfully install ABAP. During postinstall I tried to start the server. all the following services got up -
msg_server.exe
disp+work.exe
igswd.exe
But after some time 2nd service goes down. Following is the error message flashed in
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 02 16:33:16 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 31
intno 20020600
make: multithreaded, Unicode
pid 2492
***LOG Q00=> DpSapEnvInit, DPStart (00 2492) [dpxxdisp.c 1100]
Mon Jul 02 16:33:17 2007
shared lib "dw_xml.dll" version 31 successfully loaded
shared lib "dw_xtc.dll" version 31 successfully loaded
shared lib "dw_stl.dll" version 31 successfully loaded
shared lib "dw_gui.dll" version 31 successfully loaded
Mon Jul 02 16:33:21 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 054B0040, size: 3192688)
DpShMCreate: allocated sys_adm at 054B0040
DpShMCreate: allocated wp_adm at 054B1B58
DpShMCreate: allocated tm_adm_list at 054B4478
DpShMCreate: allocated tm_adm at 054B44A0
DpShMCreate: allocated wp_ca_adm at 0575B0E8
DpShMCreate: allocated appc_ca_adm at 05760EA8
DpShMCreate: allocated comm_adm_list at 05762DE8
DpShMCreate: allocated comm_adm at 05762E00
DpShMCreate: allocated vmc_adm_list at 057A9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 057A9AF8
DpShMCreate: allocated wall_adm at 057A9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Mon Jul 02 16:33:22 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1132 MB
<ES> 1131 blocks reserved for free list.
ES initialized.
Mon Jul 02 16:33:36 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
Mon Jul 02 16:33:38 2007
***LOG Q0K=> DpMsAttach, mscon ( pun-idmqa-vm1) [dpxxdisp.c 9719]
Mon Jul 02 16:33:46 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Mon Jul 02 16:33:47 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 31
Release check o.K.
Mon Jul 02 16:34:20 2007
ERROR => W0 (pid 2740) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3736) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3876) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3896) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3852) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2008) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3776) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 4052) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2740 (SIGUSR2)
ERROR => DpWpKill(2740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3736 (SIGUSR2)
ERROR => DpWpKill(3736, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3876 (SIGUSR2)
ERROR => DpWpKill(3876, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3896 (SIGUSR2)
ERROR => DpWpKill(3896, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3852 (SIGUSR2)
ERROR => DpWpKill(3852, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2008 (SIGUSR2)
ERROR => DpWpKill(2008, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3776 (SIGUSR2)
ERROR => DpWpKill(3776, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-4052 (SIGUSR2)
ERROR => DpWpKill(4052, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:30 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 02 11:04:30 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2740 Ended no 1 0 0
1 DIA 3736 Ended no 1 0 0
2 UPD 3876 Ended no 1 0 0
3 ENQ 3896 Ended no 1 0 0
4 BTC 3852 Ended no 1 0 0
5 BTC 2008 Ended no 1 0 0
6 SPO 3776 Ended no 1 0 0
7 UP2 4052 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 02 11:04:30 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Mon Jul 02 11:04:30 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 02 11:04:30 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:35 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3832) (SOFT_KILL)
Stop icman
killing process (3960) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3832 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:36 2007
NiISelect: TIMEOUT occured (1000 ms)
Mon Jul 02 16:34:37 2007
[DpProcDied] Process died (PID:3832 HANDLE:1600)
[DpProcDied] Process died (PID:3960 HANDLE:1588)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'pun-idmqa-vm1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1608
MsIDetach: detach MS-system
Mon Jul 02 16:34:38 2007
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2492) [dpxxdisp.c 8478]
Good Bye .....
I am new to SAP EP installation. Please help me regarding this issue.
Thanks and Regards,
Smithaforgot to tell you, after that probably you will need to make the installation again.
good luck. -
"Value cannot be null" error when trying to edit or create Maintenance Plan in SQL Server 2008
I have SQL Server 2008 installed on Windows Server 2008 64bit, every time I try to open or create a new Maintenance Plan I receive the error:
Value cannot be null.
Parameter name: component (System.Design)
Program Location:
at System.ComponentModel.Design.DesignerHost.System.ComponentModel.Design.IDesignerHost.GetDesigner(IComponent component)
at Microsoft.DataTransformationServices.VsIntegration.DtsDesignerService.OpenDesigner(String connectionString, Object connection, String objectUrn)
at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.Invoke()
And in the Design view screen
"Microsoft SQL Server Management Studio is unable to load this document: Could not load type 'Microsoft.SqlServer.Dts.runtime.Wrapper.IDTSPackageSigning100' from assembly 'Microsoft.SqlServer.DTSRunTimeWrap, Version=10.0.0.0, Culture=neutral'.
I have searched for a possible solution and have tried some suggestions of registering the msxml6.dll but and have installed VS2008 SP1 but I'm not in a position where I can do a full reinstall of SQL Server right now. Any help is appreciated. My SQL server
environment information is below.
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Analysis Services Client Tools
2007.0100.1600.022 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.0.6002.18005 (lh_sp2rtm.090410-1830)
Microsoft MSXML 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 8.0.6001.18943
Microsoft .NET Framework 2.0.50727.4206
Operating System 6.0.6002I digged a little deeper and figured out it was a missing directory/file in %TEMP%. Seems some CleaningTool removes all files/directories in %Temp% and after that SSMS was not working any longer. The missing file is actually not needed, but the
missing directory causes the "Value cannot be null" error.
My missing file name was:
C:\Users\<username>\AppData\Local\Temp\2\6vvdaozf.tmp
But the file name changes on every startup.
So my missing directory name was:
C:\Users\<username>\AppData\Local\Temp\2
After creating a empty directory with the name "2" in %TEMP% all went back to work fine for me.
I'm not sure the directory name is every time the same, but you can discover your missing file with the process monitor from Sysinternal Tools and filters to "Process Name is ssms.exe" and "Path contains AppData\Local\Temp"
Hope this helps other people to solve their issues too.
Thank you!! When I run %temp% it takes me to "C:\Users\Admin ...~\AppData\Local\Temp\some random number". At first the random number was 3, after I logged off and back on it was 2. My temp variable in enviromental variables is correct. I looked on another machine
running SQL2008 and temp is correct there. If I try to rename the numbered folder SSMS stops working. Any idea? -
Unable to connect BO XI3.1 SP3 on linux to sql server 2008
I am looking for some assistance with trying to connect to sql server 2008 db. We have BO XI 3.1 SP3 installed in linux environment. Was able to set up oracle and db2 variable to connect to oracle and db2 universes, after loading the db2 client and oracle 32b client. trying to connect to sql server 2008, but getting error Unable to Bind Configuration Object -(WIS 10901). Thank You.
Hi Ravi,
Depending on the version you may find useful some KB articles:
[1463263 - Error: Unable to bind to Configuration object (WIS 10901) - SQL driver for UNIX server |https://service.sap.com/sap/support/notes/1463263] (XI3.1)
[1607125 - How to configure SQL Server connectivity for WebIntelligence from a BI4.0 unix environment? |https://service.sap.com/sap/support/notes/1607125] (BI4.0)
[1607125 - How to configure SQL Server connectivity for WebIntelligence from a BI4.0 unix environment? |https://service.sap.com/sap/support/notes/1607125] (BI4.0)
If this doesn't help can you please specify version and patch level, as well as the exact error message you get.
Thanks and regards
Simone -
Error trying to install ICM 8.0 - "FAILED TO GET SQL SERVER VERSION."
Hello guys, i tried to install ICM 8.0 but when i click on Setup.exe appears this error:
"FAILED TO GET SQL SERVER VERSION. MAKE SURE SQL SERVER INSTALLED PROPERLLY
NO INSTANCE NAME FOUND.NO SCHEMA UPGRADES ATTEMPTED"
I try to check the SQL COnfiguration, about Named Pipes, but everything is allright. Someone knows what is it?
Thank you very much.You should be able to see the ICMSetup.log file somewhere - check TEMP. It seems to me that this is the first thing it does - tries to connect to the SQL database and ask for the version. Clearly it cannot. I assume you installed SQL OK, probably have the service running under a domain user created especially for the task, or the domain admin, and you are also logged in as the domain admin, and that SQL is running.
Check that log file for clues.
Regards,
Geoff -
Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008
I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ -
Cannot connect to any database either in Azure or Sql Server Management Studio
I'm unable to connect, this page just hangs on azure and from sql server management studio I get the following error - A Network-related or instance-specific error occurred while establishing a connection to SQL Server,
Hello,
Before you can connect to your SQL Database server, you must use the
Windows Azure Platform Management Portal to configure the SQL Database firewall: on the Firewall Rules tab of the SQL database server, add the IP address of your computer into the IP address range.
What's more,Windows Azure SQL Database does not support Windows Authentication. Please use SQL Server authentication in your connection string.
Reference:How to: Configure the Server-Level Firewall Settings (Windows Azure SQL Database)
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20), -- SBO Object Type
@transaction_type nchar(1), -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
-- IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
endHi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps -
Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.SHello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
TS4147 Duplicate contacts on iPad after updating Outlook 2007
After updating contacts in Outlook 2007 and syncing my iPad via iCloud, I have duplicates of the updated contacts (the original one & the updated one) on my iPad. I checked iCloud contacts and no duplicates exist there and the duplicates do not exis
-
How to call web page to search document with parameters?
Hi! i need to call a web page with access parameters to search a document and display this in .pdf format (external system). Example: PARAMETERS: license code = xxx society code = yyy nickname = ... password = ... fieldsearch = .... valuefieldsearch
-
Tax Exemption for a Contract Account
Dear Experts, A tax is raised during invoicing of electricity bill for all Contract Accounts. I have a requirement where I have to exempt tax for some Contract Accounts. The tax code has been defined in IMG in Financial Accounting. When inputting the
-
Hi all, Please let know how & where we can get the details of parcel tracking, Like our client does asample parcel to customer through courier,same some times will come back if rejected, So above how we can track in system.
-
I have a DV600t-6b00 CTO Quad Edition, and yesterday I installed a new Win7 x64 and deleted the one that came with the computer. After installing the drivers, all is right, except for the touch pad. Now I cannot close/open my touch pad by double-tapp