Error in Console: "Failed to check-in!" when trying to copy files.

Whenever I try to copy files, I get the "Preparing to copy..." dialog, which never gets beyond the striped bar. At the same time I try to copy a file, in the Console, I get an error of "Failed to check-in!" Also I get a similar reaction when I try to empty the trash, it just hangs at the "Preparing..." dialog with the striped bar.
I have tried restarting, running repair/verify on the permission and disk. Have also tried Disk Warrior with no success. Does anyone have an idea of what's going on?

I reinstalled Snow Leopard and it fixed the problem.

Similar Messages

Error -50 when trying to copy files to external hard drive.

When trying to copy files (itunes music folder) to an external hard drive, I get the following message: Copying music failed. An unknown error occurred (-50).
I have tried repairing disk permissions but still get the message. Any thoughts?

Gary,
A couple of posts referencing "error -50" seem to indicate that the error could result from a corrupted file.
One from Kappy follows:
Error -50 Post
One way you could save your music to the other drive would be to do it folder by folder (dragging each artist's folder, to the other drive). I suspect you won't have many (if any) errors doing that, and if you hit the corrupted file, you can come back to that folder and see which one is bad. You could also try to drag groups of artists folders to the drive if you had quite a few. One note: If you save your files this way, you won't be saving the library, which contains all the playlists you've created...you'll have to recreate them.
If you needed that music down the road, you could just do a File>Import from iTunes....
Hope this helps,
Bob

Build error Caught IOException when trying to copy files

Hello,
Sometimes when I build a BPM project in NWDS I get this error,
Caught IOException "C:\NWDSWS.jdi\LocalDevelopment\MINSUR_BPM\demo.com\bpm_hrsolpos_v2\_comp\gen\default\public\def_cmp\lib\moin\demo.combpm_hrsolpos_v2def_cmp.zip (the process doesn't have acces to the archive because it's been used by another process)" when trying to copy files from "C:\NWDSWS.jdi\LocalDevelopment\t2\CAC172530F2EFDDCD642AFD09DBA1782\default\" to "C:\NWDSWS.jdi\LocalDevelopment\COMP_BPM\demo.com\bpm_hrsolpos_v2\_comp\gen\default\"
Anyone knows how to solve this?
Regards
SU

Hi
I had the same problem.
Just if other get the same issue
I solved it by logging of the computer with NWDS and logon again.
Daniel

Error message when trying to copy files from memory stick to MacBookPro

Trying to copy files from my memory stick to my MacBookPro and have started to get a crazy error message - "Attempting to copy to the disk Macintosh HD failed. You do not have enough access privileges for this operation."
I've never had a problem before today. Any help will be welcomed!

Try this. When the stick is mounted on your desktop, right click "Get Info" and at the bottom choose "ignore ownership on this drive." See if that works.
Bryan

Error when trying to copy files to external drive

When attempting to copy files to external hard drive I get a message " unable to copy some data, error code -36".
How do I find out what that error code is tring to tell me?

Sadly, I have had this issue as well. Last eyar Iit got to the point I couldn't copy at all. From what I recall, Apple told me it could be one of many things. A bad internal drive, bad permissions, a bad external drive, a bad firewire port, a bad cable, bad memory, and on and on. I never did figure it out, but I do know my hard drive did crash a month later. However, having said that, I own a new computer, and last week, it started again. Still have not figured out what is going on. Good luck.

Error in EAS V11.1.1.2 when trying to copy an application

Hi, I tried to copy an application in EAS an got this error:
[Mon May 17 15:45:23 2010]Local/ESSBASE0///Error(1051432)
Failed to add application [apsname] to project at Shared Services with Error [Adding following Apps to Project failed : 'apsname_essbaseservername_1.ESBAPP;'.]
Any idea why it appens?
We have restart Shared Services afterwards and got the same error.
thanks

One possible solution would be to :-
1. Open Microsoft Word > File > Open.  
2. Paste the corresponding URL: http://<shared services server name>:<shared services port number>/interop/content in File name.
3. It will open a "Interop Realm" interface. Provide the username and password for Shared Services.
 4. Go to Files.
 5. Go to Project.
 6. The problem application will be listed here as project.
Right click on the project and delete it.
 7. Close the connection.  
7. Login to Hyperion Shared Services.
 8. Go to the Administration menu. 
9. Select "Recover LDAP" and let it complete.
Then try to create the application in the EAS console with the same name and copy the application again.
Cheers
John
http://john-goodwin.blogspot.com/

Error -51 when trying to copy file to windows server 2012

When I try to copy a file from OSX to windows server 2012 share, it acts like its going to start and i get a pinwheel and finder is acting slow and finally error -51. although it does seem to copy over the folder with correct name but no files inside. I had this issue on mavericks as well and now on yosemite beta. Please help!
Jarrod

If the drive is formatted HFS then you are limited to 32 characters on a file name. If it is formatted HFS + then you can have file names as long as 255 characters. I am not familiar withi the format you say the drive is formatted in so I can't speak to it.
If you are receiving -50 errors that can indicate a file name that is too long OR an illegal character in the filename regardless of its length.
If you are actually using 10.3.8 as your profile states then that may be part of the problem. Many of these problems existed in 10.3.X but were fixed in 10.4
I remember that 10.3.8 had issues copying to external drives when there were more than a certain number of characters in a filename. I don't remember the number but for some reason 10 or 12 is what comes to mind. It caused me many problems when I would try and copy files to a Zip disk that I used to have. Since I updated to 10.4 those issues have never occured again.
Since you know what folder the problematic files are in why not just open the folder and try to copy files one at a time. When you get to the one(s) that is a problem, change the file name to something shorter.
A better solution would be to update to 10.4 but with 10.5 coming out sometime in the Spring of 2007 this may not be the time.

Invalid Cross Link when trying to copy files e17

Hello I got a new hard drive and I was trying to copy all my files to it here is the dircetories
/media/multimedia/Pictures
to
/media/Pictures
Those are two different USB hard drives.
Any thoughts?
"Edit"
1. Open first hard drive /dev/sdc2 mounted on /media/multimedia/Pictures directory with enlightenment filemanager
2. select all files, right click, copy
3. Open /dev/sdd1 mounted on /media/Pictures Directory with enlightenment filemanager
4. no option in right click menu for paste, so I use ctl + v
5. "An error occurred while performing an operation"
Cannot move '/media/multimedia/Pictures/IMG_9539.JPG' to '/media/Pictures/IMG_9539.JPG'. Invailid cross link device.
Last edited by mich04 (2012-11-20 12:54:27)

This is not at all helpful. Please read http://www.catb.org/esr/faqs/smart-questions.html
and then edit your post to include the exact command(s) you used, paste the full error messages and any other details that might help people assist you.

I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
Feeling vulnerable. Please help.
SusaninNY

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Error code -1309 when trying to copy files?

Cannot find information about this code online.
I am trying to transfer some video files from one firewire HD to another. Transfer fails each time & this error pops up.

You can't put a file which is 4GB or larger onto a MS-DOS/FAT32 drive without compressing or segmenting it regardless of how much space is available on the drive.
(49406)

Error when trying to copy files to a DVD+RW

I am unable to copy images to a brand new blank DVD+RW disc. I keep getting an error message "Current disc canot be overwritten...". Please help.

I can use Windows 7 to copy the picture files by opening the blank DVD and dragging the files to the disc folder; I just cannot see any way to use PSE 9 to copy the files because it keeps giving me the error message that the disc cannot be overwritten.
I would like to use PSE 9 to copy images to a DVD, rather than have to use windows.

I have noticed that when using Tigers Dosk utility to ERASE a flash drive I have a choice of FAT but not FAT32. It seems that flash drives formatted as FAT do not work properly when trying to copy files from a Windows machine. Why?

I have noticed that when using Tigers disk utility to format an external USB flash drive I only have the choice of FAT ( when formatting for use on a Windows machine ) and not FAT32. I have found that USB FLASH drives formatted as FAT do not always work on Windows machines. Why? How can I use Tiger to format for FAT32?

I think it depends on the size of the Flash Drive as to whether it uses FAT16 or FAT32.
Can you format it FAT32 on the PC?
Other options would be NTFS or Mac OS Extended...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

When trying to burn files to a DVD (DVD RDL from Memorex) an error message appears saying: Impossible to burn the disk because communication failed between disk player and computer (error code 0x80020022)

When trying to burn files (1,7 GB) to a Memorex DVD, an error messge says: Impossible to burn the disk because communication between disk player and computer failed (error code # 0x80020022).
Is the Memorex incompatible with my i-Mac or what could it be ?
My i-Mac is a 21", Core 2 Duo with 3.06 GHz. RAM is 8Go 1067MHz DDR3.
Thanks.

That message is usually caused by poor media. i.e. poor coating quality.
Mermorex is generally regarded by most users here as poor quality media. So is TDK. Most of us prefer Verbatim, Fuji, Maxell or Taiyu Yuden DVD-R.
Also burn at only 2x or 4x burn speed.

Cs5 gives error that camera type is not supported when trying to open raw files but worked fine earlier

Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
THis is what I get when trying to open files. Half my session opened fine then all of a sudden i get this error. Won't open in LR5 Either. HELP! using LR5 AND CS5 ON A IMAC with a canon 5dm3. everyhting is up to date as i I checked..

I will try that now. It reads that it is up to date but I will reinstall. The session after it loaded just fine on the same card

'Failed to create object' when trying to open PDF attachment in Dynamics GP 10 OLE notes

Microsoft Dynamics GP 10 users who updated to Adobe Reader X are getting errors when trying to open or create an OLE attachment on a note.
They get 'Failed to create object' when trying to open an existing and getting 'Failed to connect.
And " Link may be broken" when trying to create a new one.
PDF attachments work pretty fine with previous version of Acrobat reader 7,8,9 up tp 9.4
Now that we install Acrobat X, something has changed.
It only does this for PDF attachments, Other file types work fine.
I was able to remove Adobe Reader X and install a prior version to work around the issue.
Has Adobe developed any Fix for the integration of X and OLE objects.
regards,

Hi Gestis,
What version of Adobe Reader are you using?
If its less that 10.1.2, please update it to 10.1.2 and then try to open PDF attachment inDynamcs GP OLE notes.

Error in Console: "Failed to check-in!" when trying to copy files.

Similar Messages

Maybe you are looking for