Error in Console report when syncing Evernote from Mac

I use Evernote and it normally syncs to the web but today it stopped syncing. All I can find is in Console report I get this message and don't know what to do with it.
7/18/09 3:25:46 PM Evernote[1549] download failed for conflict note with guid: 9d93d4ff-2bdf-475b-8fc6-b0ea314f5501
I have tried repairing permissions to no avail.
I was going to try reinstalling evernote on the mac but was afraid of losing my important notes.
Thanks
LarryB
Thanks

Thanks Kappy as I was getting a little impatient I copy the files and reinstalled the software which fixed the problem. It must have been corrupted somehow.
Anyway appreciate it.
Larryb

Similar Messages

  • HT4061 How do I keep photos in alpha-numerical order when syncing them from my laptop?

    How do I keep photos in alpha-numerical order when syncing them from my laptop?

    Read this: http://support.apple.com/kb/HT4221

  • Getting error Uni code check when modifying Ztable from work area?

    Hi all,
    Getting error Uni code check when modifying Ztable from work area?
    and how to increment counter when data modified?
    FM 'popup_to_confirm'.
    IMPORTING
           answer                      = RES.
    CHECK
          RES = '1'.
            WRITE :/ 'UPDATE'.
          MODIFY ZPPT_PPDPLAN FROM GWA_FIN_PROD.
    thanks in advance..

    what error you are getting. make sure source and Target are of similar sturcture.

  • Cannot Sync iCal from .Mac

    Whenever I try to sync iCal, a error message appears saying that iCal cannot sync due to inconsistent data, to reset data in iCal and then sync.
    I have tried resetting the data on iCal, but it doesn't reset. I erased all the info, but I still cannot make iCal to sync date from .Mac.
    Any idea?
    Thanks!

    Scherzo -- sounds like a problem I had. Try here
    http://discussions.apple.com/message.jspa?messageID=6512255
    and see if it helps -sailhome

  • How can i sync music from mac air to zen creative mp3 player

    how can i sync music from mac air to zen creative mp3 player

    iTunes will only sync with Apple devices.  You may find when you plug in your player it appears on hte desktop as another drive.  You can drag files from iTunes to that drive.  You may need to then place them in a special folder but all this is something for you to research since players differ.  We use a Sansa Clip and a RCA player with our iTunes library and that how we do it.
    Make sure your player can play the format files you have in your collection.  Our slightly older players will not play AAC which is the standard format used by the iTunes Store.  If you find that to be the case you will have to convert formats.

  • HT3529 I have lost all data on my iphone and the back-up is too old. How can I restore iMessage chats on my iPhone 4? I have all the chats on my Mac, but there seems to be no sync function from Mac to iphone. Please advice.

    Hi,
    I have lost all data on my iphone by mistake. I needed to restore the phone and I didnt realize my back-up was 1yr old, and now the phone is restored and I've got a year old contact list and iMessage chat history. Luckily my iMessage on the Mac is still valid and has all the chat history. My question is how can I restore iMessage chats on my iPhone 4 from my Mac? I have all the chat history on my Mac, but there seems to be no sync function from Mac to iphone. Please advice.

    If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
    Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
    What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
    iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
    The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
    http://support.apple.com/kb/ht1766
    Don't worry! Everything should be back to normal if you follow these steps.

  • I can't sync photos from Mac to iPad.

    I can't sync photos from Mac to ipad2 and i have read on the support page How to fix it but it won't work

    Have the photos been taken with the iPad or have the photos been synced to the iPad Air? Photos synced with iTunes to iOS devices cannot be synced back. See this link:  iOS: Syncing photos using iTunes
    If the photos have been synced to the iPad Air, you need an external app as JimHDK recommended. Or mail the photos, which will be tedious. To delete them from the iPad after transferring them, sync again with iTunes, but select no folders to sync.
    If the photos have been taken with the iPad Camera, you can connect the iPad Air to your Mac using a USB cable and then to launch Image Capture or iPhoto to transfer the photos. But that will not transfer synced photos.

  • Can't sync calendar from mac (OS X version 10.9.2) to iPhone (5s, version 7.1.1). Please help. thanks.

    can't sync calendar from mac (OS X version 10.9.2) to iPhone (5s, version 7.1.1). Please help. thanks.

    got answer by reading past community posts.   The answer is to sync by turning on iCloud on both computer and iPhone. 

  • How to sync Notes from Mac to iPhone?

    Hi.
    First up .. is Notes supported in Mavericks as I see no specific forum here?
    My question is How to sync Notes from Mac to iPhone?
    I have lots of Notes written in the Notes application on my iMac.
    All these Notes also appear in my iCloud Notes page via Safari. So far, so good.
    BUT if I want to sync Notes to my iPhone (iOS 7) my iPhone settings tells me iPhone Notes is default and that if I turn on Notes on iPhone all my iCloud Notes will be deleted.
    HOWEVER, I cannot see a way on my iPhone to set the default Notes to iCloud.
    I am unsure if this is a OSX question or an iOS question .. but it is a NOTES question.
    If you can help, it would be appreciated. Else I will ignore Notes on iPhone (as it seems from other Forums I cannot delete it).
    C'mon Apple .. you are losing the ease-of-use mojo.
    Michael

    These are fun, call apple care and ask for a senior advisor, Both Mac and ios can help. But I can't help you on here it's just too detailed. Expect to spend about 30 minutes with a senior advisor.

  • Error message when syncing photos from laptop

    When trying to copie photos from laptop to ipad I get the following message :-Photoshoot was not copied to the ipod "sids ipod" because it could not be found

    Although it's for iPhone and Touch, the following document is also worth a try on an iPad. (I'd check your photo cache first.)
    [Issues when syncing photos to iPhone or iPod touch|http://support.apple.com/kb/TS1306]

  • The error #-2147352543 was reported- when burning from iDVD

    I created a DVD project in iDVD and used Share to use iDVD. When I click the burn button I get this error: "The error #-2147352543 was reported…" I clicked on the map and there are no error triangles. The error appears almost immediately. My iDVD software is up to date. I was able to burn a short DVD a few days ago without problems.
    Please help.

    error message as soon as I click the burn button.
    Can you create a disk image?
    Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
    http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
    http://www.kenstone.net/fcphomepage/image_to_diskstone.html
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006

  • Errors in Console.log when using OfficeJet 6210

    Just ended a long, frustrating attempt to get support from HP regarding errors that appear in the console.log when scanning to PDF. They claim it's not their software -- The tech actually claimed that their software was thoroughly tested, ships bug-free and that it's 100% an Apple issue.
    Here's what gets spewed into console.log:
    Merely starting the application:
    2006-05-03 15:18:35.377 HP Device Manager[488] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Applications/Hewlett-Packard/HP Device Manager.app/Contents/Resources/Action.tif
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:35.392 HP Device Manager[488] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Applications/Hewlett-Packard/HP Device Manager.app/Contents/Resources/Action.tif
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:35.690 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    Registering transport IIOP1.0 Info
    Registering transport USBIOP1.0 Info
    2006-05-03 15:18:36.147 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.149 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.164 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.194 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.212 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.521 HP Scan and Archive[489] CFLog (0): CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    2006-05-03 15:18:38.378 HP Scan and Archive[489] WARNING: _wrapRunLoopWithAutoreleasePoolHandler got kCFRunLoopExit, but there are no autorelease pools in the stack.
    2006-05-03 15:19:03.438 HP Device Manager[488] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Applications/Hewlett-Packard/HP Device Manager.app/Contents/Resources/Action.tif
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.444 HP Device Manager[488] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Applications/Hewlett-Packard/HP Device Manager.app/Contents/Resources/Action.tif
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.561 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    Registering transport IIOP1.0 Info
    Registering transport USBIOP1.0 Info
    2006-05-03 15:19:03.614 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.616 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.636 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.645 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.675 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.841 HP Scan and Archive[493] CFLog (0): CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    2006-05-03 15:19:05.157 HP Scan and Archive[493] WARNING: _wrapRunLoopWithAutoreleasePoolHandler got kCFRunLoopExit, but there are no autorelease pools in the stack.
    ===== Wednesday, May 3, 2006 15:19:18 America/Chicago =====
    Expected integer; found `ÒÚÛÙ' instead.
    2006-05-03 15:19:44.437 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Library/InputManagers/Smart Crash Reports/Info
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:44.970 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Library/InputManagers/Smart Crash Reports/Info
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:45.448 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Library/InputManagers/Smart Crash Reports/Info
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    Scanning to PDF:
    <none>
    Quitting the application when complete:
    Unregistering transport USBIOP1.0 Info
    Unregistering transport IIOP1.0 Info
    table = 0

    Unsurprisingly, Apple confirmed that this was a HP error and that they would contact HP.
    I tried to pass-on the info to HP, but I received the response, "Console.log is not an HP application. You will have to contact the vendor of Console.log and inform them of the error."

  • "sync-rule-inbound-flow-rules-invalid" error on synchronizing an Inbound Sync Rule from the FIM connector space to the Metaverse

    I have created an inbound sync rule in the FIM portal to import groups from an external system (SQL Server) into the metaverse.  I can import the rule from the FIM MA into the FIM connector space but when I run a full sync on the FIM MA I get the error
    "sync-rule-inbound-flow-rules-invalid".  The only way I have found around the error is to remove all the attributes from Inbound Attribute Flow in the sync rule.  However, this defeats the purpose of having the sync rule in the first place.  Searching
    the Web, I have come across posts from other people with "sync-rule-inbound-flow-rules-invalid" problems but the solutions do not seem to work in my situation. 
    A little background about the sync rule
    Metaverse Resource Type: group
    External System Resource type: group
    Relationship Criteria: accountName (metaverse) = "string field" (ConnectedSystemObject)
    Create resource in FIM: yes
    Inbound attribute flow:
    - Domain
    - Member
    - DisplayName
    - accountName
    - MembershipLocked
    - MembershipAddWorkFlow
    - Type
    - Scope
    I am new to FIM so it's possible I have overlooked something in the setup of this sync rule.  Any suggestions on possible causes of this issue would greatly appreciated.

    There is no scope filter.   In regards to the attribute flows, no functions are used.  Here is further information about the attribute flows
    Set up of Inbound attribute flow for the inbound Synchronization Rule.
    Metaverse External System (SQL Server View)
    - Domain  Domain (string)
    - Member Member (multi value attribute)
    - DisplayName ObjectDescription (string)
    - accountName ObjectID (string)
    - MembershipLocked 'false' (set up as a string literal)
    - MembershipAddWorkFlow 'Owner Approval' (set up as a string literal)
    - Type 'Security' (set up as a string literal)
    - Scope 'Universal' (set up as a string literal)
    Is this the info you were asking for?  If not, please clarify what details you are looking for in regards to the  sync rule.

  • Error in segment COMM_PR_SHTEXT when downloading products from ERP to CRM

    Hi experts
    I get below error when downloading materials from ERP to CRM.
    "Data for set COMM_PR_SHTEXT may only be changed in the original system Q10CLNT310" But the material and the short texts has been created in ERP, hence I can't change them in CRM. When I look in table COMM_PRODUCT field LOGSYS has value 'Q01CLNT300' which is our ERP system. So as far as I see it, our original system is Q01CLNT300 and not Q10CLNT310 as it says in the errormessage. The result is that the sales org data we are trying to download to CRM are not downloaded.
    Can you help me on this one?
    Best regards
    Jørgen Jensen

    Hello Jørgen ,
    Q10CLNT310 --> Is this you old ERP system?
    One possibility for this error would be some product related tables contain the wrong LOGSYS value i,e Q10CLNT310.
    Also,check LOGSYS for table COMM_PRSHTEXT.
    This generally happens when data has been copied by means of client copy , and you do not run txn:BDLS.
    In txn:BDLS ,you can change the LOGSYS for a particular table or all relevant tables.
    You can execute in in Test mode, to check the affected tables.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Error in Abap code when combining data from two tables

    Hi,
    I got error in my code when  i try to select data based on two tables
    error message Unknown column name "(" field list. field list. field list. field list.
    select ( WLK1~ARTNR )
              into ZOXE1D0041-ZZPROMO
              from WLK1 INNER JOIN T001W
              ON WLK1FILIA = T001WKUNNR.
              where WLK1-PFLKN NE 'P' AND
              WLK1-QUELL NE '2'.
    Table 1 WLK1
    ARTNR   FILIA       PFLKN                  QUELL
    001         C001        P                           2
    002         C001        A                          1
    Table 2  T001W
    KUNNR                WERKS
    C001                    P001
    My requirement is to extract from article number from table WLK1 where the customer number (FILIA) matches with Customer number from (T001W) and plant (WERKS).
    In conclusion I like to have this only this row
    ARTNR   FILIA       PFLKN                  QUELL
    002         C001        A                          1

    Hi
    You need to append every article number after each select is performed
    is this an intermal table ZOXE1D0041 with header line ? if yes
    then do this way
    select WLK1~ARTNR
    into ZZARTICLE
    from WLK1 INNER JOIN T001W
    ON WLK1FILIA = T001WKUNNR
    where WLK1~PFLKN NE 'P' AND
    WLK1~PFLKN NE 'S' AND
    WLK1~QUELL NE '2'.
    ZOXE1D0041-ZZLISTARTICLE = ZZARTICLE.
    Append ZOXE1D0041.  " <edited>
    endselect.
    then ZOXE1D0041 will have all article numbers.
    Edited by: Sonal Patel on Sep 5, 2009 10:27 AM

Maybe you are looking for