Error in consolidation monitor

Hi gurus
Actually I`m cuztomizing the Consolidation of investments but Iam new in this part, I have a issue quen I carry out the task of COI, the following message is showing.
*There is no parent unit in group combination [ Cons Group G001 ]
Message no. UCF6687
Diagnosis
The parent indicator has not been set in any of the groups [ Cons Group G001 ]. This causes consolidation of investments to use erroneous group shares.
Procedure
Set the parent indicator for at least one characteristic with the role "consolidation unit".*
I tryed in master data of consolidation units but I don`t know where
Could you help me please, I will asign points
cheers

You can find parent unit checkbox in following path...
UCWB>Masterdata> Consolidation Unit> Accounting tecniques> expand the hierarchy on the right side.. you will see in the 3rd column the parent unit checkbox.
Edited by: Mani on Feb 20, 2008 6:03 AM

Similar Messages

Problem executing task in consolidation monitor

Hello
I have a small issue i get the following error message when i try to test executing a task in cons monitor for load from data stream
Task 001001 cannot be executed in period 001
Message no. UCS0150
Diagnosis
No method with a period category containing period 001 is assigned to task 001001 in version 111 for the time period 2008/001.
System Response
Task cannot be executed in period 001.
Procedure
If you still want to execute task 001001 in period 001, you need to use period categories that contain period 001 in the customizing settings of the task when you assign a method.
Here I am trying to collect data using Load from Data Stream, I have defined the method and I am able to test the same in consolidation workbench
But the same does not work in consolidation monitor
why??
Following are defined :
Method for Load from Data stream
Method
Task
In consolidatin monitor I have
Hierarchy
task group and task.
Regards
sameer

Hi Sameer K
Now I got the same error message, when executing data collection task in cons monitor.
I did as per inputs provided by you in this thread. But it was not work.
Let us explain what occur in my end is i changes period category in data collection task and then save it. After than I close the session and reopen, what ever i changes earlier was not appearing in my workbench in Data collection task.
Configuration in Data Collection task was:
Cons Freq: Monthly
Period Category: All method follows same method. In this we maintain 1 to 12 periods
Assign method: Depends on Company (I configred data collection method for each company)
Pls provide inputs to resolve
Madhu

InterUnit Elimination Task not shown in Consolidation Monitor

Dear Experts,
WHile executing The consolidation Monitor for Inter Unit Elimination Task,
I can see the Task at Company Level,, but not at Consolidation Unit Level. Can some one suggest how to resolve that.
Hierarchy--NameTask Group--
Task
Hier-1--Hier NameO--
O
Cons Unit-1------ CU Name--Blank--
Blank
Cons Unit-2------ CU Name--Blank--
Blank
Kindly advise.
Thanks
Rakesh Shrivastav

Dear Sir,
I have defined teh document Type as follows :-
Properties Tab
Posting Level -    Two Sided Elimination Entry
Balance Check-   Error when Balance not equal to Zero
Application-         Other
Posting-               Automatic Posting
Inversion -         NO Automatic Inversion
Key Figures
Transaction Currency (Ticked)
Group Currency (Ticked)
Number Range : (ZX) Created and assigned
Clearing Items Tab
Clearing Balance Sheet
GL Account - GL Account (Created manually in BCS as BS Item)
Clearing Income Statment
GL Account - GL Account (Created manually in BCS as INcome Statment Item)
Is any thing ommited???

Consolidation monitor status

Hi All,
I have requirement in our project to have a Consolidation monitor to have statuses (status management) in excel and then we can have a % completion calculated.
We have folder for each Tasks and then there are various tasks under each folder which are run at different dates during MEND.
I need to know if this is possible in standard way or we need to do customization.
Thanks in advance for your assistance.
Regards,
Vijay

Hi Thomas,
Thanks for prompt reply.
I checked the link,do the pie chart would show the errors and warning only.
I need to have all status management (pending,errors,complete etc).Is there any mechanism where we
can have all statuses for consolidation groups /Task groups in excel.
Thanks for your assistance.
Regards,
VM

Error while consolidating. The operation could not be completed.

Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

Error while consolidating (The operation couldn't be completed. Permission denied)

I have just bought a new MacBook and that has given me extra harddrive space, and now I am trying to consolidate some masters in Aperture, that I have on my Time Capsule. But I get this error:
Error while consolidating (The operation couldn’t be completed. Permission denied)
I can access my Time Capsule in Finder perfectly well. Can anyone help?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

Error in message monitoring while creating new record in R/3

Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
Devendra

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

"Error in message monitoring in runtime workbench"

Hello All,
I have an error in message monitoring in runtime workbench.
We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
Please suggest what are the steps involved to resolve this problem.
Thanks and Regards
SAN
null
k san

San,
Can you please copy / paste error message.
Also check if you have set correct port in Exchange profile under Runtimeworkbench.
Nilesh

Consolidation monitor

Hi Experts,
I have a problem with the consolidation monitor. The standard BCS content was activated and the customization was completed. When i run the consolidation monitor, there is no hierachy displayed but the sequence of task heading columns are there. is there any thing that I missed from consolidation workbench? The master data for the consoloidation unit is created in BCS.
Appreciate your help and time.
Thank you.

hi Eugene,
Thank you for the suggestions.
- ConsUnits hierarchy.-> This is checked and it is defined in Work bench..
- Tasks hierarchy with tasks assigned.-> Tasks hierarchies are created and respective methods are assigned. Here my question is, should i need to assign the task methods to consolidation units during the customization process? If yes where shall i do it please?
- You are trying to see the monitor in the same version and year/period.-> yes this has been checked already
- Cons frequency for versions combinations is set.-> Yes
Actually I am able to see the tasks in the column headings but not the cons unit hierarchies. This seems to be very strange issue. Any suggestions will be really appreciated.
Thanks.

Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?

Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?

Your factory-supplied monitor profile, associated with your monitor by the operating system, is bad. It's more common than you'd think.
To avert the error:
Open the Color Management panel of your Windows operating system. In the Devices tab, if it is not already listed [ Add... ] the sRGB IEC61966-2.1 profile and [ Set as default Profile ].
After doing the above, log out of Windows and back in again, just to ensure everything's updated.
Note that the above assumes your monitor is more or less displaying color in the sRGB color space (sRGB is short for sRGB IEC61966-2.1). For many monitors this isn't a terribly wrong assumption.
If you want to ensure you have the most accurate color, consider buying a calibration and profiling device, which (with its associated software) can set your calibration and generate custom color profiles by doing actual measurements from your monitor. You'll want to take some time to get your mind around how color-management works, and that is not a trivial task. It's certainly well beyond what can be taught in a forum post by post.
Good luck.
-Noel

Error in consolidation monitor

Similar Messages

Maybe you are looking for