Error in Contract distribution with services

Hi everyone,
We need your help. We are working in an implementation of SRM 7.0 with ECC 6 EhP 4. We are using the new cetral contract.
We have a issue, when we create a central contract with service items and we try to distribute it into ECC we are getting the following message:
"For object SERVICE , number range interval does not exist"
Do you know what is this objetc? Do you know if we are missing something?
Thanks,
Ivá

Hi Ivan,
Are the services locally created or replicated from backend? It may also be the case, the services are replicated from the backend system say, A and now you are trying to distribute the contract with the service to backend systems A and B. Please, check if the backend system B has the number range (ext) for service defined to accomodate the distributed service.
Thanks and regards,
Ranjan

Similar Messages

Unity Service - Error: Unable to communicate with service control center

Hi Guys,
I have a CUC Cluster of 2 nodes at 9.1.2 I did a Cobra restore and since the cobra I have an issue when I go to Unity Connection Servicability and then
If I go in service Management I have this error : " Error: Unable to communicate with service control center "
I am not the only one who got that Issue.. the documentation is not so clean from cisco..
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/110587-cuc-credential-error.html#Controlcenter
Here is what I did and the result
admin:run cuc dbquery unitydirdb select alias, displayname, objectid from vw_user where alias ='adminunity'
alias       displayname objectid
adminunity adminunity   2774a94d-052d-49e9-9288-bf447a4b1532
admin : run cuc dbquery unitydirdb select objectid, userobjectid, credentialtype, encryptiontype from tbl_credential where userobjectid = "2774a94d-052d-49e9-9288-bf447a4b1532"
objectid                              userobjectid                          credentialtype       encryptiontype
1255f7f7-5d15-4406-ab54-df5f248e30bf 2774a94d-052d-49e9-9288-bf447a4b1532 3               3
5ace4b8f-dbeb-4e46-8d7c-146b13db5499 2774a94d-052d-49e9-9288-bf447a4b1532 4               3
admin : run cuc dbquery unitydirdb update tbl_credential set encryptiontype = "3" where objectid ="1255f7f7-5d15-4406-ab54-df5f248e30bf"
admin run cuc dbquery unitydirdb update tbl_credential set encryptiontype = "3" where objectid ="5ace4b8f-dbeb-4e46-8d7c-146b13db5499"
admin:run cuc dbquery unitydirdb select objectid, userobjectid, credentialtype, encryptiontype from tbl_credential where userobjectid = "2774a94d-052d-49e9-9288-bf447a4b1532"
objectid                              userobjectid                          credentialtype encryptiontype
1255f7f7-5d15-4406-ab54-df5f248e30bf 2774a94d-052d-49e9-9288-bf447a4b1532 3               3
5ace4b8f-dbeb-4e46-8d7c-146b13db5499 2774a94d-052d-49e9-9288-bf447a4b1532 4               3
but once I did that, I wasn't able to login anymore with my user, so I put it back to 4.
anyone ?

I make the right configuration of my network (eth0 and eth1) and I reboot my server the start CRS service automaticaly...
The problem is that my server don't stop rebooting automaticaly!!!
In /var/log messages I have this " oracle CSSD failure. Rebooting for cluster integrity" !!!
some one can help?

No Contract Distribution with PPS

Hi guys,
We are implementing SRM7 with ECC6 EHP.
With reference to sap note 1354971 Disable Contract distribution in PPS, does it means we cannot use Central Contract function together with PPS activated?
As I understand the concept of Central Contract is to enable an Operational Contract to be used as valid source of supply in both SRM7 and ECC6 (and for this to be possible it has to be distributed to backend ECC6). However, if the distribution disable how would the contract available as source of supply in ECC6?
Cheers,
Tom

Tom
Thanks for your reply.
I am trying to get the contract distribution working but for some reason I seem to be missing something very fundamental.
I think that I have done all the required config steps and PI has been implemented accordingly.
Would you have any config notes / documentation that you would be will to share so that I can hopefully get to the bottom of it.
Regards
Keith

SRM Central Contract Management with Service Hierarchy

Hello Gurus !
Is it possible to use the export/import functionality (with the business function SRM_CONT_IMPR_2) for changing/adding the service hierarchies in SRM Central Contract? I see the SAP note that the hierarchies are not supported for Purchase Order.
Any idea?
Thanks in advance
Regards
Raj

Hi Raj,
it's not supported for contracts either.
Regards,
Zsofi

Error 1101 still appers with XP Home Service Pack 3 - What Now?

Hi,
I have received an error message 1101 (corrupt windows installer service) after trying to update Java.
My system is Windows XP Home with (recently updated Service Pack 3).
This error messgae also appeared with service pack 2 , so I don't think the recent upgrade to service pack 3 is any cause.
I have tried Java's instructions to ..........
Go to Start -> Run.
Type msiexec.exe /unregister
Click OK
Go to Start -> Run.
Type msiexec.exe /regserver
Click OK
Run the Java installation again.
This did not work, so tried their next suggestion to...........
If the above fails to address the issue, download and install the latest Windows Installer Service from Microsoft for your respective operating system.
For related information visit: Microsoft Windows Installer
This did not work either as Microsoft download advised as I have Service Pack 3 I do not need the download.
So I still have this error 1101 message when update Java and presume it has something to do with this Windows Installer Service. (actually wondering if this why my pages are taking longer than normal to load also).
I could restore back to before servic pack installation and then try the microsoft download but wondering if there are any other suggestions first.
Can anyone help?
Thanks

I have exactly the same problem - XP Service pack 3 and can't successfully install Java update. I also have followed all of the advice mentioned with "msiexec.exe /unregister" and "msiexec.exe /regserver" and then renamed the files and tried again, and then tried it in safe boot mode, then tried to update the Windows service, etc. but to no avail. I still keep getting:
"Error 1101.Error reading from file:http://javad-esd.sun.con/update/1.6.0/sp-1.6.0_07/sp1033.MST. Verify that the file exists and that you can access it."
Has anyone with XP service pack 3 had any joy? Mike_Shellshear

SRM 7.0 Central Contract- Distribution to backend failure

Hello experts,
We are implementing SRM 7.0 Central contracts scenario with PI.
The Contracts get created and Released but the problem is that the Distribution to backend fails. The Status in BBP_PD shows 'Distribution Incorrect' and the RZ20 gives an error 'Backend data cannot be read'.
We checked all the configuration settings (including the PI settings) and everything seems to be in order.
Would appreciate if someone could throw some light on the potential cause of the problem.
Thanks
Raman.

Message must have created . check all SRM outbound transactions .but PI could not catch them.
Note 1284369 - User attributes check in Contract distribution via services - what is your SP level in SRM 700.
The sap stratergy in earlier version
table in ECC BBPD_CTR_IDOCREF with message 019-This will result in setting the GOA status to 'Distribution Incorrect'.
so SAP might have tried the same way in CCTR as well, Once message are created and this message number like IDOC number updated in ECC table for the further refrence .so like wise SRM trying to communicate the same to ECC but it would have failed.
do you remeber when GOA idoc fails this table we will have reference number and reprocessing idoc.
like any reference of your input must register in one ECC table but there may have this table or some other reference table.
/SAPSRM/CL_CH_SOA_MAP_CTR_OUT CLASS DO SOME trick and see what is happening here
Muthu

Central contrcact distribution with WSRM with SRM 7.01 (EHP1)

Hi Gurus,
We are implementing Central contract distribution with SRM 7.01 and ECC 6 EHP 5 backends.
Can we use WSRM for Point-to-Point Communication for contract distribution? As the current customer does not have PI I am happy to avoid implementing PI.
Thanks in advance.

Hello Naveen,
Find the error details:
We have followed the steps for peer to peer service configuration as per note1268336 for synchronous service QUERYCODELIST for our XI independent scenario for contract management.
As per the steps for peer to peer for settings,we are done with the configuration in SRM side i.e. provider system and configured the QUERYCODELIST service.
Now while doing the same on ECC side(BDE) i.e. Consumer system when we are maintaining this service and creating Logical port,We get pop up to enter the details.
Once we enter the details and click on APPLY setting button we are getting this error which Muthu as mentioned.
"SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:404Connection Failed"
I have configured this in the past for some other project once where similar error(it was 402 or 403) was coming since WSDL node was not active under SRT in SRM but this time we have checked it and all the required services are also active.
Can you help to check further on this.
Regards.
Paresh.

Critical Errors SCCM 2012 (Distribution Point and Reporting services point)

Hello,
We are getting errors under the Site Status for the Distribution Point and Reporting services point. Was running fine and have not really made any changes but all of a sudden we have these critical errors.
The report server service is not running on Reporting Service Point server "XXXXXXXXXXX"; start the service to enable reporting.
We have stopped and restarted the SQL 2012 reporting service point with no errors. What else should we look at for this error? And are these related?
Thanks,
Bobby

Hi,
Have you checked the log file SRSRP.log?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCUL error Distribution with errors

Hi Every one,
CUA is working properly for all users, except for one idoc which has failed as "Distribution with errors". This user is successfully created in all other (10 systems) system without any issues, but only to one particular system it is failing (only one user). When I checked in WE05, with the idoc number, direction '1' in CUA, it shown green sign with 03 status, I can't find this idoc in child system. Please advice.
Thanks in advance,
Sushma
Edited by: sushmaraok on May 17, 2011 11:43 AM
Edited by: sushmaraok on May 17, 2011 11:53 AM

Hi Sushma,
It may be the case that there maybe a time delay for the child system to process the request from CUA and revert back to CUA.
In ideal situation and most of the times it works on real time basis. If you monitor your CUA-Child lanscape continuously you can find a pattern. For eg, in my landscape XI system takes 20min approx for reverting, hence no need to worry immediately. You can check whether the changes are reflecting in the child system and move on.
If you query is only on how to find the Idoc on Child System. You can follow the below steps.
(1) Note the Failed IDoc Numbers along with time stamp in SCUL.
(2) Go to Txn 'WE05' in Child system & Enter the Data and Time in the options. Suggest that you give plus and minus 2mins from the time in CUA ie., if time is 14:41:12, you may give 14:39:00 till 14:43:00. And Execute.
(3) Sort the Displayed List by "Date & Time".
(4) From the Displayed list, select the Idoc and you can see the 'T100 Text' message in Idoc that shows which user is afftected after a 3sec delay.
(5) Scroll down till the relevant user is found & double-click the IDoc.
(6) Click on the "Services for Objects" icon at top and select "Relationships"
(7) In the new box, you can find the Originating Idoc number from CUA.
Hope this Helps.
Incase you believe any of the above information was helpful, request you to kindly award some points. If this revert helps solve the thread, request you to kindly award full points and close the thread.
With Regards
Ganesh.S

Error after transport of Virtual Cube with Services

Hi All,
would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
Points would be rewarded appropriately.
Cheers
Noor

Hi Noor,
Check this link, it may help you.
Re: Transport issue - Source system does not exist
Regards,
Vijay G.

URGENT: Error while deploying ear with weblogic service control

We have build an ear within workshop and deployed to another server. When accessing the application we are getting the following error:
'com.bea.control.ServiceControlException: Could not find service ref in jndi: java:comp/env/service/hhs_wc_controls_SearchServiceControl[javax.naming.NameNotFoundException: While trying to look up comp/env/service/hhs_wc_controls_SearchServiceControl in /app/webapp/WCWeb/5120123.; remaining name 'comp/env/service/hhs_wc_controls_SearchServiceControl'] '
The service control is connecting a WSDL to consume a web service.
Does the service control create a JNDI entry or some file is not getting built into the ear?
We are using WLP 10.3
Your help is much appreciated.
Thanks,
- Shankar
Edited by: user1269940 on Nov 6, 2009 12:39 PM

Hi Shankar
When a WebService Control is created based on .wsdl file, it generates a .JAR file with all jaxb generated classes and .java files with service and port classes. This .jar file will be under web-inf/lib folder. Then I guess you are using this WebService control in your Pageflow and invoke webservice operations. So do you have like a portlet for this pageflow and testing from a portal. I have a similar scenario but I did not get any error that you are seeing. I consume SOA BPEL webservices in one of my pageflows using Service Controls.
To debug, first test if the wsdl is working by directly invoking the wsdl operations using a utility servlet by name "wls_utc" which you can invoke from any of your wls/wlp domain. Start your domain assuming localhost and port is 7001. The url for testing webservices is:
http://localhost:7001/wls_utc. This works if domain is in Dev Mode only. This page opens a jsp page, where you can type your wsdl url (http://host:port/context/a/b/xyx?wsdl). This page parses that wsdl and shows all operations and for each operation the fields for input parameters. See if this wsdl works fine.
As for deployment, there is no additional step required. Just ear your application that has .war file and that has web-inf/lib folder with actual webservice control generate .jar file. I did no tconfigure any additional JNDI lookups like that.
Thanks
Ravi Jegga

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

Can't install quicktime or itunes I recieve error code 2738. I'm running windows Vista 32 with Service Pack 2. I have tried old and new version of both programs. Also, have gone through Apple's online help with no good outcome

Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads. I'm running Window Vista with Service Pack 2. I have check for all window update. I have gone through Apple itune help list. Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

Excellent news!
Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
https://discussions.apple.com/community/ipod

The Lync Server Front-End service terminated with service-specific error %%-1008124893.

Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
Thanks

Hi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

Error using BAPI_PO_CREATE1 for creating PO with services

Hi,
I'm getting an error saying 'EnTER account assignment data for item' when I use BAPI_PO_CREATE1 and try to create POs with Service Items. I have filled all the required details, even then the system throws up this error message. Thanks for any help.
Regards,
Vijay

what have you passed to the table POACCOUNT? and POACCOUNTX?
Regards,
Ravi

Error in Contract distribution with services

Similar Messages

Maybe you are looking for