Error in conversion exit for DATE

Hi
I am loading transaction data to Zcube from a flat file ,for 0CALWEEK
in excel I am unable to type 022007,if I load 22007 I am getting error like
Error in conversion exit
CONVERSION_EXIT_PERI6_INPUT
here 2 is the 2nd week in 2007
Plz provide me how to format cell in excel to take 0 as starting number and the file will be saved as CSV format or any other procedure
Thanks
Padmanaha

Hi,
Select the column in excel
Right Click and choose format cells.
In the pop up window, the first tab is for formatting. A list will be available, there you have to choose "Date" format.
Within the date format, you will find number of options to set the formatting according to your specifications.
If that does not work out, just use "Custom" format as "mmyyyy" for all the cells in that particular column.
With Regards

Similar Messages

Conversion Exit for data type FLTP

Can someone suggest me a conversion Exit for data type FLTP?

Hi,
CHAR_FLTP_CONVERSION
FLTP_CHAR_CONVERSION
Have a look at the function module documentation.
Regards,
Reema.
PS. pl. award points to useful answers.

Where can i find the conversion exits for date

hi
where can i find the conversion exits for date

Hi,
Use function modules to convert data into fiscal year and week.once you get week then you can calcute period,
quarter and half years based on that week.For this the function modules are
1..UMC_CALDAY_TO_FISCPER
2..DATE_TO_PERIOD_CONVERT
Regards,
swami.

Error in conversion exit

Hi,
This is Bhu,
New to this site,
I am learning BW now,
I am facing the following problem while loading the transaction data from flat file.
Error message : error in conversion exit CONVERSION_EXIT_UNIT_INPUT.
Kindly help me in sorting out this problem.
Thanks,
Bhu.

Hi Bhu.
I usually see this problem when the unit of measure is not set up in the system. In order for the unit of measure to pass the conversion, you will need to add the unit to the allowed list. That can be found in the IMG (transaction SPRO).
Hope that helps.
Adam

Error in conversion exit CONVERSION_EXIT_PERI7_INPUT

Hi Gurus, I am trying to load 3 external flatfiles. They are all similar files with only year difference 2006,2007 and 2008. I was able to load 2 of these files for year 2006 and 2007. Now I am getting this error message "Error in conversion exit CONVERSION_EXIT_PERI7_INPUT" and in details I get "An error occurred in record 1 during execution ofconversion exit CONVERSION_EXIT_PERI7_INPUT for field FISCPER".
This indcates the field 0FISCPER. When I check the data type it is the same for all the files. The conversion routinr PER17 is also same for all. I still do not get why I am getting this error. Does anybody have a hint on this?

Hi Bigtoja,
There has to be something different in the 3rd file. If not the format then, data. The reason is that, the first 2 files are loaded. Try the following to confirm. If the data is similar, you should be able to load it. Take a backup of the File 2. Copy the contents of File3 into File2. Make sure that the format of all the columns are same. Now, upload File2. If data is correct, it gets loaded. Otherwise, something wrong with wither format or data. You have the backup of File2 in case something is screwed. Hope it makes some sense.
Thanks and Regards
Subray Hegde

Custom Conversion Exit for a Custom InfoObject

Has anyone created a custom conversion exit for an InfoObject?
I have a requirement to mask the first five digits of the Social Security Number on output only. I created a custom conversion exit ZCONV, for example and added code to the output function module CONVERSION_EXIT_ZCONV_OUTPUT to accomplish the masking. In the CONVERSION_EXIT_ZCONV_INPUT, I just passed INPUT to OUTPUT.
It works OK for masking the output results but any input variables return an "Invalid Format" error. So I am not able to have a selection screen variable where you enter the SSN number and run the query for it. It tries to convert it to the masked form and then run the query.
Any pointers. Helpful answers will be promptly rewarded.
Thanks
Vineet

Since the ultimate goal was not to display Social Security Numbers, I changed the custom Conversion exit to display SID values. In case anyone needs to do the same, The output function module CONVERSION_EXIT_ZCONV_OUTPUT is coded to read the SID value for the SSN number from the SID table of the InfoObject and the input function module CONVERSION_EXIT_ZCONV_INPUT does the reverse by reading the SSN number for the SID.
Dropdowns on variable values work OK by displaying the SID value and the employee name. The only drawback is that you cannot input a SSN number on the selection variable. You have to do the dropdown and select.
Thanks
Vineet

Error "No conversion found for EA to KG"

Hi,
I am facing an error like "No conversion found for EA to KG" at the time of GR.
Inputs: In Mat Master Base UOM is Gram,Order Unit is KG and Conversion(1Kg=1000G) is maintained in Additional Data.
Purchase Order created with KG as both Order Unit and Order Price Unit.
Even though there is no question of EA in this document,Why the error has cropped up at the time of GR?
Pls explore the possible reason behind this error.
Reward points are sure.
Regds

Hi Pavan,
Thanks for reply,
Pls note my observation made to check UOM at differenet places just fyi
1)Materail Master:
Base Unit- G,
Sales Unit- KG,
Order Unit-KG,
Unit Of Issue- KG and
Wt Unit- KG
2)PIR:
Order Unit - KG
3)PO:
Order Unit-KG ,
Stock Unit- G and in conditions also rate is maintained per KG.
Still am not able to trace out why the system is throwing an error "No conversion found for EA to KG". How does it is related to EA.
Pls give some inputs...
Regds

Conversion exit for BANKN

Hi all ,
We have created a conversion exit for BANKN (LFBK-BANKN) field to mask it ; This field is getting masked in most of hthe reports execpt few . When i checked the issue , CDPOS table doesnt contain this field against the change number (say of a particular vendor ) . Any idea , why the field is not present in this table and how to bring the same in it.
Thanks
Supriya murudkar

Yes, You are right. The field is not in the CDPOS table but probably we don''t need that field .
BANKN (LFBK-BANKN) field has internally masked with the CDPOS-CHANGENR (Document change number). So whatever the data you required from the CDPOS, You can get by the BANKN (change number).
plz chk.

Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT

Dear all
I got the following error
" Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT "
This is an original sample data.
~
CUST007,SREP07,MAT008,3,DZ,1,,19990424
CUST008,SREP08,MAT008,3,DZ,2,,19980328
CUST008,SREP08,MAT009,2,CS,3,,19980203
CUST008,SREP08,MAT010,1,LB,4,,19991104
CUST009,SREP09,MAT011,1.5,LB,5,,20000407
CUST010,SREP10,MAT011,1.5,LB,6,,20000701
~
you can download it from [ http://safariexamples.informit.com/0201703661/IC_DEMOBC.csv ]
As you can see , [T-Code CUNI screenshot] ( http://static.flickr.com/35/71412534_4998517812_o.jpg )
there is no LB.
so i tried to create LB. but... i couldn't ..
Because, LB already exists in the Table T600 & T600A
T600 screenshot ( http://static.flickr.com/35/71412793_dcbae3d11a_o.jpg )
T600A screenshot ( http://static.flickr.com/34/71412535_96f9278862_o.jpg )
What do you think ?
The value of SPRAS is DE.
is it possible to cause the error ?
Well, i deleted the value of UNIT column from the original data so that i could escape the error " Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT ".
~
CUST007,SREP07,MAT008,3,,1,,19990424
CUST008,SREP08,MAT008,3,,2,,19980328
CUST008,SREP08,MAT009,2,,3,,19980203
CUST008,SREP08,MAT010,1,,4,,19991104
CUST009,SREP09,MAT011,1.5,,5,,20000407
CUST010,SREP10,MAT011,1.5,,6,,20000701
~
But i don't think it is a right way. isn't it?
Thanks in advance.
David.Kang

Dear Eugene
Thanks a lot today.
Yeah, my incoming data do not match with the transfer structure.
Take a brief look at my case studies.
[Data Selection] tab
http://static.flickr.com/34/71452760_2117e1d4c0_o.jpg
[Data targets ] tab
http://static.flickr.com/34/71452762_035aaa8d78_o.jpg
[Processing ] tab
http://static.flickr.com/34/71452763_fa322fe8f1_o.jpg
[External Data] tab
1) IC_DEMOBC.csv ( It includes the value of UNIT column. )
( The original data file is http://safariexamples.informit.com/0201703661/IC_DEMOBC.csv )
http://static.flickr.com/20/71452764_fb4a24a809_o.jpg
- Preview result screenshot
http://static.flickr.com/35/71452765_07a4ae8e12_o.jpg
2) IC_DEMOBC2.csv ( It inculdes only two rows with UNIT values : CS. )
http://static.flickr.com/20/71452766_da7b2c46b7_o.jpg
- Preview result screenshot
http://static.flickr.com/35/71453112_348077e31a_o.jpg
3) IC_DEMOBC3.csv ( It inculdes all rows without UNIT values. )
http://static.flickr.com/34/71453113_301afeca73_o.jpg
- Preview result screenshot
http://static.flickr.com/20/71453114_8438122d06_o.jpg
I try to solve it by myself.
( i already spend almost one week~~ . )
but i feel the end is coming soon.
with kind regards
david

Migo error no conversion foun for NA to ROl

While doing migo i get an error NO conversion found for EA toROl how to resolve

Hi
In MM02, maintain alternate unit of measure fr this material from EA to ROI
Regards
Ajay M

ERROR: acctg already run for date

Hi
How to solve this issue.
Please find some info on error file.Thanks.
[sngivvp03-root:/var/adm/acct/nite ]
# cat active1217
1217
Wed Dec 17 02:30:00 GMT 2014
-rw-rw-r--   1 adm adm         3720 Dec 16 14:30 /var/adm/wtmpx
-rw-rw-r--   1 adm adm            0 Dec 16 02:30 fee
-rw-r--r--   1 adm adm       225680 Dec 17 02:30 pacct
-rw-r--r--   1 adm adm       498840 Dec 17 01:00 pacct.0
-rw-r--r--   1 adm adm       300280 Dec 16 23:00 pacct.1
-rw-r--r--   1 adm adm       378280 Dec 16 05:00 pacct.10
-rw-r--r--   1 adm adm       308680 Dec 16 21:00 pacct.2
-rw-r--r--   1 adm adm       310320 Dec 16 19:00 pacct.3
-rw-r--r--   1 adm adm       305400 Dec 16 17:00 pacct.4
-rw-r--r--   1 adm adm       306120 Dec 16 15:00 pacct.5
-rw-r--r--   1 adm adm       297600 Dec 16 13:00 pacct.6
-rw-r--r--   1 adm adm       297120 Dec 16 11:00 pacct.7
-rw-r--r--   1 adm adm       298320 Dec 16 09:00 pacct.8
-rw-r--r--   1 adm adm       297680 Dec 16 07:00 pacct.9
files setups complete
wtmpx processing complete
connect acctg complete
process acctg complete for /var/adm/Spacct.0.1217
process acctg complete for /var/adm/Spacct.1.1217
process acctg complete for /var/adm/Spacct.10.1217
process acctg complete for /var/adm/Spacct.11.1217
process acctg complete for /var/adm/Spacct.2.1217
process acctg complete for /var/adm/Spacct.3.1217
process acctg complete for /var/adm/Spacct.4.1217
process acctg complete for /var/adm/Spacct.5.1217
process acctg complete for /var/adm/Spacct.6.1217
process acctg complete for /var/adm/Spacct.7.1217
process acctg complete for /var/adm/Spacct.8.1217
process acctg complete for /var/adm/Spacct.9.1217
all process actg complete for 1217
tacct merge to create daytacct complete
no fees
no disk records
updated sum/tacct
command summaries complete
system accounting completed at Wed Dec 17 02:30:03 GMT 2014
ERROR: acctg already run for Wed Dec 17 23:00:00 GMT 2014: check /var/adm/acct/n ite/lastdate
[sngivvp03-root:/var/adm/acct/nite ]
(Have provided below workaround, but still the problem exists)
ERROR: acctg already run for date: check /var/adm/acct/nite/lastdate
The date in lastdate and current date are the same.
(System accounting completed at Wed Dec 17 02:30:03 GMT 2014
ERROR: acctg already run for Wed Dec 17 23:00:00 GMT 2014 )
Remove lastdate.
Let us know the output.
Kindly advise how to rectify it.

MRP will create a requisition in your plant to procure from the plant that is mentioned in the special procurement key.
The second best solution is to maintain a calendar for this past old year 2003 in your system by using transaction SCAL.
But why would you need a requisition for a time 6 years back? Ever thought about this?
You must have a production order or sales order with a wrong delivery date or replenishment lead time in your system. Because of that the MRP run calculates an expected delivery date for the requisition item that far in the past.

Challenge 4u:Error in conversion exit...CONVERSION_EXIT_ISOLA_INPUT

I SEARCH 4 THESE QUESTION WHETHER ITS ANSWERED OR NOT ... IT WAS NOT ANSWERED YET...
hey guys while i were loading the csv(flat file) in infopackage...its showing this error...."Error in conversion exit: CONVERSION_EXIT_ISOLA_INPUTCONVERSION_EXIT_ISOLA_INPUT"
IF YOU KNOW THESE LET ME KNOW...
COULD U PLESE TELL ME THE PROCESS STEP BY STEP ... I'M A NOVICE USER...

This error occurs with respect to the Language field. When it tries to convert the ISO language of 2 character representation to internal 1 character representation.
http://help.sap.com/saphelp_45b/helpdata/en/35/034cb2fed01622e10000009b38f9b8/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/108a8282-828b-2a10-8c92-a4db24e33c8f
hope it helps, assign points if helpful.
Regards, Uday pothireddy

Help - Business Partner "Error in conversion Customizing for address types"

Hi Experts,
I am encountering an error with maintaining the Payer/ee in the Payment Details (SI) tab under Counterparty company code.
The error message I get is below --
*Error in conversion Customizing for address types (-> note 594871, III)
Message no. FTBU800*
I need your kind help please to troubleshoot this issue.. I receive the same error when i book deals and try to view the "Payment Details" tab during TX01 or TM01. I am not sure anymore what could be causing this problem.
Thanks,
David

Hello Raj,
Impliment the correction as specified in the sap Note 594873.. sect III.
You can take the help of your basis team for downloading it Using Tcode "SNOTE" and if you have sufficient authorizations you can do it your self..
another option is to down load the Note from the service market place and get the correction implimented manually by a technical consultant.
Wish you success.
M. Naveen Kumar

Conversion exit for German umlots

Hello,
Do we have any conversion exit for changing internal format of German umlots ( ÜÄÖ ) to external formats.
Regards,
satya

Hi,
CHAR_FLTP_CONVERSION
FLTP_CHAR_CONVERSION
Have a look at the function module documentation.
Regards,
Reema.
PS. pl. award points to useful answers.

Flat file Error in conversion exit CONVERSION_EXIT_PERI6_INPUT

Hello Experts!
I´m trying to upload a flat file data to an infocube and appears an error which diagnosis is:an error ocurred in record 1 during execution of conversion exit CONVERSION_EXIT_PERI6_INPUT for field CALMONTH.
Procedure: Check That the record where the error ocurred has the correct format , and correct it accordingly.
The characteristics in this fields (CALMONTH) are:
- Data Type: numc-character string with only digits.
- Length: 6
- Convers.rout. PERI6
- Output Length 7
I hope You can help me soon.
Thank you!

Hi Eduardo Vergara,
You just have to make sure the 0CALMONTH format is exactly the same. We have to match the format in the both columns. So in DataSource/Trans.Structure File CALMONTH change the Type to Numc and length o 6 . This is our problem but the tip is to match the proprieties.
Regards,
Alberto.

Error in conversion exit for DATE

Similar Messages

Maybe you are looking for