Error In Cost Center Hierarchy Creation
Hi Guru's
Error In Cost Center Hierarchy Creation
Our Business scenario is we have controlling area 1000, under that we have cost center Group as ABC lower level to that we create each business wise in lower level like 1100, 1200, 1300 under this we create 110010 for production 110020 employee 110030 dummy so on, by mistake the client has created 1400 below level to 1000 now all cost center amount is booked in this is reflecting in 1400 and as well in ABC now I need to move all 1400 cost centers below ABC please let me know how to go about this.
Regards,
Bhaskar
Hi,
So, if it's standard hierarchy go to OKEON and just drag-and-drop this group under ABC; simple as that. In KSH2 (if it's 'alternative' group) the technology of moving is different, but still quite obvious: select the group you want to move and select the new placement.
Regards,
Eli
Similar Messages
-
Error in Cost Center Hierarchy
Dear all,
When I delete all cost center in standard hierarchy by tcode OKC4, some cost centers still appear in cost center hierarchy with activation status is "red". How to delete all cost center with "red" activation status in this case ?
When I check these cost centers by tcode KS02 or KS03, the system raises information "No data exist" but when I create cost center with the same code by tcode OKEON, the system raise error "Cost center already exist".
So how to solve the problem ? I want to clear all the cost center in standard hierarchy and create again in DEV (No transaction data existed).
Thank you very much,
Dat LamHi,
Go to OKEON - Menu - Extras - Hierarchy-Master Data - Comparison and see what's the output. Genrally, you are not supposed to delete cost centres from the standard hierarchy.
Regards,
Eli -
Flat file upload against Cost Center Hierarchy nodes
Hi,
we would like to upload flat files into BIIP which need to contain values for cost center hierarchy nodes.
Is there a way to add the cost center hierarchy node value into a flat file and upload it inot BIIP?
Thanks and regadrs,
Hans.Hello Hans,
you can post the value agaist any node as long as it is a postable node (not a text node).
Regards
Marc
SAP NetWeaver RIG -
How to use cost center hierarchy?
Hi,
How to use cost center hierarchy?I have created that but how to use that.Can somebody help me?
SekarOnce the Cost Centre Hierarchy is Created, it can be used in Profit Centre Reports.
Choose Financials -> Cost Accounting -> Profit Center Report ->Template.
Here Choose, the Cost Centre Hierarchy the you had created and generate the report.
Also refer these threads
[Reg... Costcenter hierarchy;
[cost centre hierarchy; -
Cost Center Hierarchy in Parameter
I am creating a program to get CO related data from the underlying database and display in ALV. I want to have a parameter for Cost Center Hierarchy so if they want data pertaining to a certain set I can select all cost centers in a certain heirarchy.. I am unfamiliar with the tables used for this and not sure the type to use for my parameter and how to get the cost center heirarchies in the dropdown list for the parameter. Any help would be appreciated. Thanks!
You find hierarchy for each KOSTL in csks-KHINR. Hierarchy itself you can find in SETHEADERT-SETNAME. For building a dropdown I believe you are able to search for relevant post
-
Copy cost center hierarchy to profit center hierarchy: is this possible?
Hi,
I would like to know or I can copy my standard cost center hierarchy to my standard profit center hierarchy. If so, how to proceed?
Thank you in advance,
Eric van Zundert.
Ps. We do not have enterprise organisastional active.Hi Eric,
No standard tool exists for this operation. However, if you really prefer to do it manually, you can pull a trick. You can export your cost centre hierarchy to TXT file, correct there certain parameters (change BCCSS to BGLPCT, etc.) and then import it as profit centre hierarchy.
Regards,
Eli -
What is the highest node in Cost Center Hierarchy.
hi SAP gurus,
can anybody tell me what is the highest node in Cost Center Hierarchy.
thanksHi,
In Cost Centre Hierarchy highest node is Operating concern -> controlling Area
Hierarchy of controlling is-
Client
Operating Concern
Controlling area
Company codes
Business Areas
Rgds
shekar
hi SAP gurus,
can anybody tell me what is the highest node in Cost Center Hierarchy.
thanks -
Cost Center Hierarchy in ABAP program
Hi All,
We are writing a custom program to extract the cost center master data from SAP.
There is a requirement to extract the cost center group that is linked to the cost center as well.
But the extracted group should only be the one attached to it in the standard hierarchy.
All other groups should be rejected.
Please share your experiences on how can this be achieved as I could not find a table where the cost center hierarchy is maintained directly.
regards,
Manish GuptaHi Manish
The table is SETLEAF.. All cost center groups including Cost Center Hierarchy are stored there
there might be some differentiating field between the Hierarchy and other Cost Ctr Gruops...
BR,Ajay M -
How to delete a cost center hierarchy
Hi all,
We are having a issue regarding the cost centers. The cost centers have been assigned wrong cost center numbers. Now the client wants a set of new cost center numbers to be used in the system. In order for that to be done I thought may be if I can change the cost center hierarchy that has been assigned to the controlling area in OKKP transaction we can assign new cost centers to the new hierarchy and solve the problem.
But the system does not allow us to assign a different cost center hierarchy from the already existing one when cost centers are assigned to it.
My issue is how to delete the cost center hierarchy.
If that is not possible how can we remove the cost centers assigned to the cost center hierarchy ( is this possible)
Last question can we delete the transaction data posted to cost centers.
Points will be assigned to all the replies.
Thanks,
SaradaHello Sarada,
If the requirement is to track new cost centers only going forward, then you may need to create new Cost Centers, block old cost centers. Create a new node in the hierarchy saying "Old-do not use".
If the requirement is to have the history transactions reflect the new cost centers as well, then you will need to undertake a project for SLO (System Landscape Optimization) which will replace this data at table level. This is a major project in itself and the programs are proprietary to SAP.
Hope this helps. -
Time dependent cost center hierarchy
Does anyone know how to turn the R/3 standard cost center hierarchy into a time dependent hierarchy?
I can change the hierarchy of infoObject 0costcenter to be time dependent. The datasource 0COSTCENTER_0101_HIER does not fill the validfrom validto fields.
I would prefer not to have to load the hierarchy from a flat file.
Thanks,
JohnAny changes to the R/3 standard hierarchy are stored in tables CDHDDR,CDPOS. This can be seen from tcode OKEON ==>selected cost center==>History==>Change Document==>Standard hierarchy Area. This screen shows the validity of a cost center as it pertains to a node.
John -
R/3 Cost center hierarchy not shown in BW
Hi,
we have an issue regarding the transfer of a certain cost center hierarchy into the standard info object 0COSTCENTER. We have several hierarchies in place in the R/3 system and we transfer each of them daily via info packages into BW. When you look into the info package you can press button "Hierarchies from OLTP" and afterwards you can choose via radio button the dedicated hierarchy to transfer for this specific IP. Since last night one of the hierarchies is "disappeared" it's not shown any longer in the list (and therefore the IP crashed) and pushing the refresh button doesn't help. I am very surprised as this is not a new hierarchy (I just know that it has been changed in R/3 yesterday). What I have seen so far is that there is another hierarchy with a different technical name but with the same description. I know this shouldn't be a problem... Anyway, any hint is appreciated.
Regards,
Oliver.Update:
The issue has been resolved. I learned that only top nodes of cost center hierarchies can be selected on the BW side to be transferred (A top node is a group that is not present in any other group as a sub-group.). The hierarchy in scope of the transfer has been removed form any other hierarchy in R/3 and now it works. -
Profit center hierarchy and cost center hierarchy
Hi
What are the things we have to consider to create Profit center hierarchy and cost center hierarchy and what is the need to assign profit center hierarchy to profit center and cost center hierarchy to cost center. What levels does this fall into? Can some one please guide me.
Thanks.As you would for any other infoobject
Activate the business content hierarchy datasources on R3 for cost centre and profit centre
Go into BW - replicate the metadata
Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
Then repeat new infopackages for all hierachies -
How to extract newly build alternate cost center hierarchy in BW
Hi All,
We have eight cost center hierarchies already in BW. Now a new alternate cost center hierarchy is craeted in ECC. We need to extract it in BW. What should i do to extract newly build cost center hierarcy in BW.You should be able to extract it by executing the corresponding infopackage and DTP.
Just filter the infopackage with the name of your new hierarchy -
Ambiguity problem in a cost center hierarchy
Hello,
I have a problem with duplicated values in a cost center hierarchy.
There is a cost center that appears in two different groups and I am not able to delete none of them
It appears an ambiguity problem because of this, how could I solve it?Hi
In KSH2 select the cost center and then click on REMOVE. But this will not work for a std hierarchy as explained below. SO THE SOLUTION IS TO DELETE THE COST CENTER MASTER DATA AND THEN RE ASSIGN IT IN ' KSH2'
1) The REMOVE function contradicts the fact that each master data must
always be assigned to one node in the standard hierarchy.
2) The DELETION of objects requires time-consuming checks of master data,
especially if entire subtrees are to be deleted. Therefore it is not
supported here.
If such a case arises you should delete the master data
using master data maintenance.
Thanks
kamala -
Download for the cost center hierarchy
I would like to help me I need to do is download a program for the cost center hierarchy, but not if there is a function that you do this?
Go to transaction KSH3 (Cost Center Group) and enter your top node and press enter.
Place your cursor on the top node in the list and take the menu path:
Extras -> Export
Click on Presentation server, enter a file name and press the enter button.
Rob
Maybe you are looking for
-
'Reuse_alv_grid_display' - how to enable save layout button
Hi, am not getting the option 'save layout' button in my ALV. I have tried the following code. s_layout-colwidth_optimize = c_on. s_layout-zebra = c_on. s_variant-report = sy-repid. s_variant-username = sy-uname. CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY
-
How to use at last/ at end of in this code
Hi, i want to do sum for each and every line item of the delivery quantity and compare it with final purchase order quantity if it is equal do not display in the output.(how to use at last/at end of ) in this code, below code wat i have ritten is onl
-
This message appears when I try to update my I Pod. The software works for playing music from my library, but my I Pod can't sync with the new updates. There is a Problem downloading the I Pod software for the I Pod "Phil's I Pod". An unknown error o
-
Hi Experts, We are working on customer account statement. for that we are developing a smartform, in which it should display subtotals and grand total. Here the subtotal is month wise. and all the totals of subtotal is the grand total. How can we get
-
Sqlldr through Java Stored Proc
I am loading data from sqlldr through a java stored proc that executes command strings. My string executes in windows through the command window just fine and I can see the data but If I run the sqlldr through java then I must exit my session and rel