Error in creating a request CUP ( AE53)

I have installed CUP ( AE 5.3) .
All the configurations are done. When I click on create a new user request the screen goes into a busy mode & remains in the same state. It doesn't give any error message.
Has anybody faced simillar error before..I have checked all connector / request initiator settings & they look ok.
Regards,
Shailesh

Hi
The problem is not with AE configuration but with the loading of the requestAccess.do page .
Please restart the J2EE server where you have deployed and try again.
If problem persists please let us know ;
Which browser are you using , IE , mozilla etc ? and if it is IE which version is it ?
thnks

Similar Messages

Error while Creating Travel Request ..thru TRIP

Dear all,
As I am suppose to creat a travel request thru TRIP but i am geting the below error and the msg no..............
Error: Trip country IN / trip region do not exist in the system (T702O)
Message no. PTRA_WEB_INTERFACE031
As Mr. Paulo Vitoriano suggested me to Define Trip Areas, etc......... but my Trip Areas has already been defined and i have checked it also .... but still the error is same ....... so frnds pls tell me wat else may be the problem....
I read thred Error while Creating Travel Request ..thru TRIP which is posted by prasanth but what they suggested i maitained already but still i am facing same problem could you pls suggest me where i missed.
Waiting for Reply.
Regards,
Nagaraju

Hi,
Please check the following:
1. Just check have you assigned country India to the trip provision variant you have created.
2. Just check whether you have assigned the trip provision variant correctly to the respective country.
Regards,
S.Srikanth

Error while creating Travel request

Dear All,
ESS 2005/SP6
While creating travel request in I am getting following error
"Errors have been discovered when checking the Expense Report. Please correct them in order to proceed."
Regards,
Kamal Rawal

Hello Kamal
Did you manage to resolve the issue in relation to "Errors have been discovered when checking the Expense Report."?
Best Regards
Roger Earle
[email protected]

Access Enforcer (error in creating a request)

Hi All,
when i am creating a new request in Access Enforcer . After filling alll the details and clicking the submit button it is showing a error in creating request .Path not found.

Hello,
You must have to select at least one condition attribute while creating your initiator. It seems initiator condition not meeting the details you are filling in your request. So it is not able to trigger the workflow initiator.
For simple scenario, if you are filling your company details in your request then change your initiator condition attribute to "Company".(Don't include more condition attributes for now). Once it works out then change initiator details back to your requirements.
Please let me know if this will not resolve your issue.
Thanks
Himadama

Error when creating a request Template In OIM

Hello all,
I have a very strange issue with OIM, it is when I try to create a request template, and put a restriction in Organization field, it creates the template and everything is fine. Suddenly, when I try to edit this template, the OIM shows a window with the next error:
ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
I have found in other posts the "solution", It is to change in the database -> RequestTemplate Table -> Template Data Column, the restriction Organization from "the name of the organization" to "the Id of the organization", and restart the OIM, so after that, I can edit the template.
Here is the issue that I don't understand,... few hours after, I want to edit the same template, and the OIM again shows the same error:
ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
And if I review in the database the table, in the Template Data Column, the restriction of Organization has AGAIN the "Name of the organization".
And I can again change that to the "Id of the organization", but it's time lost restarting the OIM. Time that I don't have, because Its more than one template.
Please somebody could help me with this issue.

Hello,
I already found the solution to this issue.
I had to restart the OIM server but also the DataBase and after that, this problem was solved.
Thanks anyway.

Error in Create Travel Request

Good Morning.
I am implementing Travel for ESS. But in the moment of give clic in the service for Create Travel Request the system display the following error:
[Error Travel ESS|http://www.freeimagehosting.net/uploads/46ed778b99.jpg]
What is cause of this error?
Kind Regards

Hi Sergio
I check and the User is not expired.
I found the following suggestion.
I asume that you are using a "Basic Authentication" method, if this is your case, you should configure the SICF service with the following parametters:
1) Go to SICF, /yourservice / double click
2) On the "Logon Data" tab, in the "Procedure" option choose "Alternative Logon Procedure".
3) On the same tab, at the "Logon procedure option", delete the SSO option, and change the Number of the another methods, raised the "Basic Authentication" to the first place.
4) Go to Error pages tab, flag "System logon", and after that click over Configuration, here check "Do no display warnings"
The question is:
This is necessary?
Kind Regards

Portal runtime error on creating Travel Request

I have copied the standard ESS Role and created my own ESS Role. I then assigned this to my portal user.
Then when I log into the portal as the user and click on "Create Travel Request" or "Create Expense Report" URLs, I get the following error:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:53_02/02/10_0021_23623650
Refer to the log file for details about this exception.
Is there any portal/IMG setup that is missing? Or any authorization missing?

Thanks I made changes to Resources node in IMG.
Before making these changes I was getting the following error:
Portal Runtime error. An exception occured while processing your request... Exception ID:.... Refer to log for details....
I just changed the URL of PCD page in the Resources node.
Note:
(1) In Portal I have made my own folder structure:
-> Portant Content
-->My Travel Setup
--->Employee Self-Service
>Roles
>MyTravelESS (role copy of the original Portal ESS role, Delta link. i.e. ESS role under End User Content-->Employee Self-Service)
(2) I have not copied the iviews, pages worksets etc. under my new folder structure.
But Now I am getting another error:
500 Internal Server Error...
Root Cause
The initial exception that caused the request to fail, was:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name base

"Description Field empty" error in Create Expense Request

Hi All,
When a user creates an Expense Report, He is getting this above error message:
The step by step user actions are:
1) Clicked Create Expense Request (Non travel planned expenses)
2) The trip schema selection field is there and some schema is selected
3) Then he enters the Trip data and moves to the next screen
4) Then the Expense types selection screen comes, and the user selects the Expense type.
5) Then two input fields were supposed to come for "Description" and "Comments", but the user is not getting anything and just check, new entry button, and when he moves forward, the "Description Field empty" error appears.
Has anybody encountered this odd error?
Any insights to solve this issue?
BR,
Uday

Hello smit ,
You can find out the enhancement ( BADI defnition ) that corresponds to MSS Requisition request .
Debugging the same will let you know why the error is coming .
You could also be due to config done under MSS -> recruitment.
hope this helps.
thanks,sahiba

Error while Creating a request to assign PD profile

Hello Experts,
I am trying to create a Change request to assign only the PD profile to the user .
However when i submit the request i get an error message "Select at least one role".
I am not sure is it mandatory to select any role even when you just wish to assign the PD profile.
For Auto Provisioning by system i have provisioning type as Combined provisioning type as position.
I am currently on GRC 5.3 SP16.
Regards,
Pranab Singh

now its working fine. iam getting that error due to odbc connection.now i checked callinterface then it will working fine.
thnks for your reply

Error while creating creditmemo request with reference to invoice

HI aLL,
I am facing one issue while creating a credit memo request in VA01 with reference to invoice.
Our project stock is valuated stock.In projects we always use valuated stock so i cannot change the valuated into non valuated.
When we try top copy the error pops up" Valuated project stock not allowed with customer stock." and the line item is not copied in the credit memo.
Diagnosis:The entered wbs manages a valuated project stock,at the same time sales order stock is maintained on sales order line item.this combo is not allowed as different valuation methods within a project is not allowed.
Tarun Kapur

Hi Arun,
Have you check & maintained middleware setting for document transfer
(tcode R3AC1). Check object SALESDOCUMENT and try maintain transaction
type there. Don't forget to activate use tcode R3AS.
hope this helps.
Gun

Error while creating billing request thr tcode DP91

hi,
while creating a billing request through dp91 we are getting an error mesage : "Error during material determination for sales document item 40000067/000020". i have checked the material determination for the material, but there is no material determination maitained for the material, the material here is a service material, after creating a contract we are trying to create a billing request through DP91. this is where wer are getting the error message.

Hi,
It looks like the DIP Processor cannot determine a material.Go you your DIP Profile and check the Material Determination settings
Also run TCode ODP2 to check the consistency of your DIP Profile and also chk Material Origin field was not checked in the Costing tab of the material master.
Check above and revert back.
Regards
Ashu

Error while creating change request via solman support desk message

I have configured CHARM and my change req. is working for urgent correction, I have tested the entire workflow.
however when i try to create a new change req. via support desk message --> create a change request open
I get following error
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Diagnosis
An exception has been triggered in PPF action processing.
System Response
Action processing has been terminated. The status of the transaction is still incorrect.
Procedure
You cannot execute the action until the cause of the error has been removed.
The error messages will be kept until the transaction is next checked for subsequent analysis.
Procedure for System Administration
If necessary, analyze other messages in the application log for the incorrect transaction. To analyze the termination, you can activate the breakpoints in the checkpoint group socm_exception.
Additional Information:
Exception CX_SOCM_PRECONDITION_VIOLATED occurred (program:
CL_HF_HELPER==================CP, include:
CL_HF_HELPER==================CM00A, line: 29).
pls help

Hi Yunus,
Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management -> Define Mapping Rules for Copy Control.
Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
Kind regards,
Latief

Error in creating Transport Request for a view table

Hello all,
I have an ECC IDES 6.0 system named EC1 and another one which is ECC EhP4 IDES named EA1 which I have just installed.
One of my requesters has a view table named ZVAITM_TBLE in EC1 and she wants it to be transported to EA1.
So I created a workbench transport in SE10 and included the following:
PgmID = R3TR
Obj = VDAT
Object name = ZVAITM_TBLE
But when I press enter, I encountered the following error:
No object definition exists for Customizing object ZVAITM_TBLE
Message no. TK427
Diagnosis
The Customizing object R3TR VDAT ZVAITM_TBLE is not defined in the tables of the Change and Transport System.
This means that you cannot use the Transport Organizer to edit it.
System Response
The function terminates.
Procedure
First check whether the name of the object is correct. Then you (or the system administrator) should check the object definition, to ensure that the object was created correctly (transaction SOBJ).
If the object does not exist, then create it or delete it from the request/task.
I am new to transports so I have no idea how to proceed.
Please advise.
Thanks a lot!
Cha Cha

Hello Cha,
Kindly open this custom table using SM30 and try creating a transport request from there.
Regards
Vivek

Error when creating transport request in Charm for Portal

Hello Guru's,
I'm configuring ChaRM for our Portal environment using CTS+
When I create a transport request I get the following error message:
Parameter EPD not in version of tp configuration.
Any thoughts????
Regards,
David

Hello David,
Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
1107361 - Migration BAdI-Implementation Error Message XT 465
45548 - Transporting language-dependent objects
Hope this helps you out!
Thanks,
Mark

Error in creating leave request

Hi ,
I am new to HR and i am working on Leave management.
When i am trying to crate a leave request workflow, i am getting the below error msg:
'Absence type 100 was not found in Customizing for 21.10.2010'
What could be the reason?\
Thanks,
Krish.

Hello Kishore,
You don't have the absence type created on either one of the two following tables.
T554S - This one is for the Absence creation on the backend in IT2001.
T554S_Web - This one is to show on the frontend framework of the Leave Request.
Regards,
Bentow.

Error in creating a request CUP ( AE53)

Similar Messages

Maybe you are looking for