Error in creating activity from Account application ( from activity tab)
Hi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil
Hi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil
Similar Messages
-
Password Violation error while creating users from Admin interface
Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
VijayGuys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay -
11g Release 2 Installation: Error in creating link from ../bin/javaws
While installing Oracle 11g Release 11.2.0.2 on a solaris 10 box, the installation fails on the copy phase with message below:
INFO: creating link '../bin/javaws' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws'
INFO: creating link '../bin/javaws' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws'
INFO: Exception thrown from action: createLink
Exception Name: LinkException
Exception String: Error in creating link from ../bin/javaws to /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry IgnoreThank you Srini. During the prerequisite check was successfull. However here are the last 100 lines of the log:
oui/bin/runInstaller.var oui/bin/runSSHSetup.sh oui/bin/addLangs.sh oui/bin/runConfig.sh oui/bin/attachHome.sh oui/bin/detachHome.sh
INFO: chmod 0664 oui/jlib/OraCheckPoint.jar oui/jlib/OraInstaller.jar oui/jlib/OraInstallerNet.jar oui/jlib/OraPrereq.jar oui/jlib/OraPrereqChecks.jar oui/jlib/emCfg.jar oui/jlib/emocmutl.jar oui/jlib/http_client.jar oui/jlib/oneclick.jar oui/jlib/prov_fixup.jar oui/jlib/share.jar oui/jlib/xmlparserv2.jar oui/jlib/lib/emocmclnt-14.jar oui/jlib/lib/emocmclnt.jar oui/jlib/lib/emocmcommon.jar oui/jlib/lib/http_client.jar oui/jlib/lib/jcert.jar oui/jlib/lib/jnet.jar oui/jlib/lib/jsse.jar oui/jlib/lib/log4j-core.jar oui/jlib/lib/osdt_core3.jar oui/jlib/lib/osdt_jce.jar oui/jlib/lib/regexp.jar oui/jlib/lib/xmlparserv2.jar oui/jlib/Libraries.old/NtServiceQueries.jar oui/jlib/Libraries.old/WindowsFolders.jar oui/jlib/Libraries.old/WindowsGeneralQueries.jar oui/jlib/Libraries.old/areasQueries.jar oui/jlib/Libraries.old/clusterActionLib.jar oui/jlib/Libraries.old/clusterQuery.jar oui/jlib/Libraries.old/dbActions.jar oui/jlib/Libraries.old/dbQueries.jar oui/jlib/Libraries.old/fileActionLib.jar oui/jlib/Libraries.old/fileQueries.jar oui/jlib/Libraries.old/generalActions.jar oui/jlib/Libraries.old/generalQueries.jar oui/jlib/Libraries.old/jarActionLib.jar oui/jlib/Libraries.old/launchpadaction.jar oui/jlib/Libraries.old/netQueries.jar oui/jlib/Libraries.old/ntServicesActions.jar oui/jlib/Libraries.old/oradim.jar oui/jlib/Libraries.old/rgsActions.jar oui/jlib/Libraries.old/rgsQueries.jar oui/jlib/Libraries.old/spawnActions.jar oui/jlib/Libraries.old/standardDialogs.jar oui/jlib/Libraries.old/unixActions.jar oui/jlib/Libraries.old/unixQueries.jar oui/jlib/Libraries.old/w32OcxLib.jar oui/jlib/Libraries.old/w32RegActionLib.jar oui/jlib/Libraries.old/w32RegQueryLib.jar oui/jlib/Libraries.old/wingeneralActionLib.jar oui/jlib/jlib/emocmclnt-14.jar oui/jlib/jlib/emocmclnt.jar oui/jlib/jlib/emocmcommon.jar oui/jlib/jlib/http_client.jar oui/jlib/jlib/jcert.jar oui/jlib/jlib/jnet.jar oui/jlib/jlib/jsse.jar oui/jlib/jlib/log4j-core.jar oui/jlib/jlib/osdt_core3.jar oui/jlib/jlib/osdt_jce.jar oui/jlib/jlib/regexp.jar oui/jlib/jlib/xmlparserv2.jar
INFO: chmod 0750 srvm/admin/ractrans
INFO: chmod 754 OPatch/crs/auto_patch.pl OPatch/crs/crsconfig_lib.pm OPatch/crs/crsdelete.pm OPatch/crs/crspatch.pm OPatch/crs/oracss.pm OPatch/crs/patch112.pl OPatch/crs/s_crsconfig_defs OPatch/crs/s_crsconfig_lib.pm OPatch/crs/log/dummy
INFO: chmod 644 OPatch/docs/FAQ OPatch/docs/Users_Guide.txt OPatch/docs/Prereq_Users_Guide.txt
INFO: chmod 755 OPatch/opatch
INFO: chmod 644 OPatch/opatchprereqs/oui/knowledgesrc.xml OPatch/opatch.pl OPatch/opatch.ini OPatch/emdpatch.pl OPatch/opatchprereqs/opatch/opatch_prereq.xml OPatch/opatchprereqs/opatch/rulemap.xml OPatch/opatchprereqs/opatch/runtime_prereq.xml OPatch/jlib/opatch.jar OPatch/jlib/opatchutil.jar OPatch/jlib/opatchprereq.jar OPatch/jlib/opatchactions.jar OPatch/jlib/opatchext.jar OPatch/jlib/opatchfmw.jar
INFO: chmod 754 OPatch/fmw/application.py OPatch/fmw/init_def.py OPatch/fmw/main_driver.py OPatch/fmw/node_manager.py OPatch/fmw/prereq.py OPatch/fmw/start_stop.py
INFO: chmod 644 OPatch/opatchprereqs/prerequisite.properties
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: chmod: ERROR: invalid mode
INFO: chmod: WARNING: can't access bin/cmadmin
chmod: WARNING: can't access bin/cmctl
INFO: chmod: WARNING: can't access bin/cmgw
chmod: WARNING: can't access bin/cmmigr
INFO: chmod: WARNING: can't access bin/procob
chmod: WARNING: can't access bin/rtsora
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: DONE Executing permissions file from :/tmp/OraInstall2011-12-08_04-13-37PM/fastcopy/setperms1.sh
INFO: InstallProgressMonitor: Starting phase 2
INFO: Installation in progress
INFO: Installation in progress
INFO: Copying files for 'Sun JDK 1.5.0.24.08 '
INFO: Copying files for 'Sun JDK 1.5.0.24.08 '
INFO: 12/8/11 4:19:20 PM EST: Starting install Install Phase 1 of component Sun JDK
INFO: Calling Action unixActions10.2.0.3.0 createLink
source = ../libjsig.so
destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/server/libjsig.so
overwriteExistingLink = true
overwriteExistingDir = null
INFO: creating link '../libjsig.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/server/libjsig.so'
INFO: creating link '../libjsig.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/server/libjsig.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
source = ../libjsig.so
destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/client/libjsig.so
overwriteExistingLink = true
overwriteExistingDir = null
INFO: creating link '../libjsig.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/client/libjsig.so'
INFO: creating link '../libjsig.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/client/libjsig.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
source = libjdgaSUNWffb.so
destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/libjdgaSUNWafb.so
overwriteExistingLink = true
overwriteExistingDir = null
INFO: creating link 'libjdgaSUNWffb.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/libjdgaSUNWafb.so'
INFO: creating link 'libjdgaSUNWffb.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparcv9/libjdgaSUNWafb.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
source = client/libjvm.so
destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjvm.so
overwriteExistingLink = true
overwriteExistingDir = null
INFO: creating link 'client/libjvm.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjvm.so'
INFO: creating link 'client/libjvm.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjvm.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
source = libjdgaSUNWffb.so
destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjdgaSUNWafb.so
overwriteExistingLink = true
overwriteExistingDir = null
INFO: creating link 'libjdgaSUNWffb.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjdgaSUNWafb.so'
INFO: creating link 'libjdgaSUNWffb.so' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/lib/sparc/libjdgaSUNWafb.so'
INFO: Calling Action unixActions10.2.0.3.0 createLink
source = ../bin/javaws
destination = /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws
overwriteExistingLink = true
overwriteExistingDir = null
INFO: creating link '../bin/javaws' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws'
INFO: creating link '../bin/javaws' for '/app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws'
INFO: Exception thrown from action: createLink
Exception Name: LinkException
Exception String: Error in creating link from ../bin/javaws to /app11g/oracle/product/11.2.0/dbhome_1/jdk/jre/javaws/javaws
Exception Severity: 1
I -
Error while creating subsite from site template
Hi,
I am getting below error while creating subsite from existing site template .
Sachin BhosaleThere must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers, -
Error while creating DTP from DS to Infoobject
Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
SatyaHi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose. -
Error while creating activities from Account application (Activity tab page
Hi Experts,
We are using CRM 5.0 with PCUI ( EP 7.0 version). We are getting below error when try to create activities from Account application in PCUI ( from activity tab page):
Error : Activity contains error.
Diagnosis
This transaction has errors.
Procedure
To correct the errors, go to the maintenance interface of the transaction.
To navigate to there, use the link to the account application
Pls suggest how to proceed with this error & helpful solutions would be rewrded generously.
Regards,
Basavaraj PatilHi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil -
Error while Creating PO from Purchase Requistion in Third Party Sales
Dear Team,
While Creating the Purchase Order from Purchase Requistion in Third Party Sales. When I am saving the PO I am getting the Error in GL Account Cannot be Used. I have disabled the field G/L Account in settings of Account Assignment Category of Third Party. Still I am facing that Error while Creating Purchase Order. Can you guide me where we do this Assignment of G/L Account so that I can change the G/L Account.
Thanks,
Farhan.Dear Farhan,
1. Go to T. Code: FS00 and enter GL number and Company Code and go to Tab: Create/bank/interest, write down the field status group.
2. Go to T. Code: OBC4 and Select your Field Status Variant and Double Click: Field Status Group (From Left-hand Dialog Structure)
Double-Click on to Field Status Group (as noted down from in Step 1).
From Select group, Select Additional account assignments and make Earmarked Funds, as optional.
Best Regards,
Amit -
Error while creating datasource from table MBEWH
Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.Hi Zakir,
This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and create one datasource...
so, you need to check that related table also.. for that MBEWH table..
ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay -
Error while creating order from notification
Dear Experts,
I am getting error (No material number transferred(Message no. M3752)) when creating order from R3 notification. the material number not copied from screen to VIQMEL. This is only in few times, not all times. when i debug this, in VIQMEL-FEKNZ = X(Error Records Exist).
This is only for R3 notification. Also not in all times.
What is the problem?Thanks, I am creating notification thru IW21. form IW22 i am creating order. while creating is gives above error. in this case MATNR not saving in QMEL. even when i am saving in IW22 it's not saving. when i am creating order from IW22 it gives above ror. but it gives error some times only, not all the times. for the same equipment i created so many. some four times only i am getting this.
-
Error while creating spfile from pfile
i am creating spfile from pfile and i am facing some issue regarding this i am getting error as ORA-01127: database name 'bbcomdev''' exceeds size limit of 8 characters as my db name is 8 characters only..
Please help.Anand.. wrote:
If the pfile if we mention the below, instance startup fails
*.db_name=''bbcomdev''Why do you have two pairs of single-quote marks?
>
>
SQL> startup nomount pfile='D:\oracle\product\11.2.0.2\dbhome_1\database\INITbbcomdev.ORA'
ORA-01127: database name 'bbcomdev''' exceeds size limit of 8 characters
Anand -
Error while creating transformation from DSO to InfoCube
Hi Gurus,
When i am creating tranformation from DSO to InfoCube getting an error, " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value
'8.50 ' "
ZAMT_PLC is created with 0CURRENCY.
On checking we found that there is no value stored for Currency field in table level itself. Now in this case how do we avoid this error.
I want to know why is this we need to have value for 0Currency field???
Thanks & Regards,
AnupHello Anup,
If you load a key figure which has a unit assigned to it,
then for every records where the key figure has a valid value
(value 0) the corresponding unit has to be delivered as well.
Additionally please check note 1366474 regarding the RSTRAN 312
error message:
"The corrections contained in Note 1165168 are incomplete.
Depending on the sequence during loading, the system may not issue error
message RSTRAN 312 even though data regarding the assigned unit or
currency "space" is incorrect."
This means actually, that the system should have issued the RSTRAN312
error message even before the upgrade, but for some reason this
check found no issues in some constellations. This means furthermore
that your system behaved incorrectly in the past, that this
error message was not triggered if you loaded key figures without
any unit.
I'm sorry to tell you, but the system behaves and works as designed
as it should be even before the correction from note 1366474.
Please change your transformations for key figures which
have a unit assigned, that the unit field is filled correctly.
with the corresponding units, otherwise the system will abort
the processing of the data with the above mentioned error
message.
Best Regards,
Des -
Error while creating datasource from view ZBSIS_VIEW
Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource. -
Getting error while creating table from one database to other.
Hi,
We are getting below error while creating the table from one database to other.
SQL> create table fnd_lobs parallel compress as select * from [email protected];
create table fnd_lobs parallel compress as select * from [email protected]
ERROR at line 1:
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
Regards,
Bhatiahi
what are the apps version local and remote database???
Snapshot too old errors occur because Oracle can 't reconstruct a consistent
image of a block for the purposes of a consistent read.
I feel at remote database, you are using UNDO, it will be rather easy to iincrease the undo retention time or increase the undo tablespace size.. if you are dealing with roll back segments, you may have rollback segments whose optimal values are too small...
increase roll back segments size and select again then
the following metalink notes might be helpful
ORA-01555 "Snapshot too old" - Detailed Explanation Doc ID: 40689.1
How To Avoid ORA-01555: Snapshot Too Old When Running PAAPIMP Doc ID: 603259.1
OERR: ORA 1555 "snapshot too old (rollback segment too small)" Doc ID: 18954.1 -
ORA-12571 error while creating packages from Windows clients
Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, KUpdate: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben -
Budget error while creating delivery from sales order
hi Gurus,
System is throwing error PB603 "Item 004 WBS element ABC-XXX budget exceeded" while creating delivery from sales order.
I am picking material from unrestricted plant stock (not in project stock).
I am also confused as sales order has 3 line items & error shows Item 004 !Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul
Maybe you are looking for
-
HT1541 How can i remove 57 cents from my itunes account
Hi, I have .57 cent left over from a gift card and want to change my location, but i cant because of my balance!!!!!
-
Hi all, I am new to DMS.How to install content server? and What is the difference between Content server and Kpro server? Thanks and Regards, Vairavan
-
Exchange has been enabled for over a year and I ST...
Hey Everybody, I've been reading several threads and came across this one; http://community.bt.com/t5/BT-Infinity/FTTC-Exchange-and-Cabinet-BT-Wholesale/td-p/181321 Unfortunately it appears that they've pulled this from public view so I can't access.
-
Dear expert, I have activated WM PP to automatically create Transfer Requirement when production order is released. But, when releasing production order, and click save, this error appear: "No production storage bin could be found (plant and material
-
Dynamic Parameter only showing 1000 records when Crystal report is run.
I have created a crystal report using ODBC access to a table that has 3000 records. I created a dynamic parameter to pull a list of all the Customer ID's in a customer table and the parameter will only show the 1st 1000 records. In addition I canno