Error in Creating Bill.

Hi,
While creating Individual bill, EASIBI, we are getting an error saying...'Sub Transactions in Schema ( schema name ) step ( step number )  inconsistent.
Will be highly appreciated if some one answers this.
Khan.

Hi Irshad,
   In Customizing for SAP Utilities under Basic Settings/Enterprise Structure -> Determine Deregulation Settings, the ServProv. Agreement field is selected under Dialog Control in case of a Deregulated scenario.
Just check it should be unticked in case of a regulated scenario.also sending u a link which will help u.
http://help.sap.com/saphelp_utilities472/helpdata/EN/f1/5dcd3ba9567d78e10000000a11402f/content.htm
Regards,
Richa Tyagi

Similar Messages

  • Error when creating billing / accounting document with VF01

    Hi All,
    When I use VF01 to create an invoice with reference to a LF D/N, I got the following error after saving.
    "An exchange rate type is not defined for country CN
    Message no. FF 802". And billing document is created but with no accounting document.
    I checked the exchange rate type is defined. but I can not find the place where I can assign to the specific country.
    Best Regards
    Jean

    Thanks for your help.
    Hi Dave,
    I checked in S_BCE_68000174, it has been already assigned.
    Hi Ferry,
    In FTXP, the tax code has been maintained.
    And you are right, when I maintain the field KURST in table T005, it is ok. But I am confused in 4.6C, the field KURST can be maintained by T-code OY01, but in 470, exchange rate type cannot be found in OY01. Where can I set in 470?  And why in 470, even field KURST is empty in table T005, but there is no such error when creating billing document?
    Many Thanks
    Jean

  • Error while creating Billing doc using VF01 for Debit memo req. from RRB

    Hi,
    I am creating billing doc for my Debit memo req. which is created using RRB(DP90, DP95).
    Error message - Item 000010 does not exist.
    When I debugged and looked into code it seems following lines are causing problem.
    Program
    LV60AA28
    Line u2013 734
      IF  vbap-vkgru EQ vkgru_dyn_posten.
        IF vbap-aufnr IS INITIAL .
    set AUBEL because it was overwritten by VBAP-VBELN
          vbrp-aubel = vbap-vgbel.
          vbrp-aupos = vbap-vgpos.
          vbrp-autyp = vbap-vgtyp.
    This code was not in 4.6 system.
    We have just migrating from 4.6 to 6.0 and facing this issue while testing.

    First of all you should try to learn how to express in a public forum like this. 
    On your comments
    Do some ground work from your end
    why should I ??  if you want you can do ground work or any work.  If you post a question, you have to hear patiently all suggestions and dont scribble whatever you want.
    You should have some basic
       understanding of SAP ABAP.
    You should have posted this question ABAP forum !!!!   Why without any sense you have posted in sales forum ??

  • Error while creating billing documents

    Hi,
      While creating billing documents I am getting error message as 
    Maintain customizing for excise and series group determination
    Message no. 8I619
    I have check the setting for CIN it is OK excise and series group are maintain properly so what can be the proble,
    regards,
    zafar

    Hi,
    Check once again customizing
    Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    - Define excise series groups based on type of outgoing document
    - Assign series group to excise registration ID
    - If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    - If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    - No account postings for CENVAT in sales cycle
    - No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
    Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Thanks
    Chidambaram

  • Error while creating billing document using VF04 transaction

    Hi All,
    User is trying to create billing document using VF04 with ference to delivery number. When pressing save in invoice creation system SAP gives invoice document number (No accouting document generated). but no documents are actually created. When user trying for second time log is showing this sales order is currently processed by the user(user is same who is trying to create invoice)
    Please let us know what is causing this issue since this issue is happening in production and we can not debug this.
    We checked for number range also but its not.
    Waiting for your inputs.
    Regards,
    Jyothi CH.

    When pressing save in invoice creation system
    SAP gives invoice document number (No accouting document generated).
    but no documents are actually created
    Check there is any clash with internal number range of billing type vs other billing types ?
    Try to create billing document using VF01,see any messages were poping while saving ?
    Check for abap dump in ST22 ?
    Edited by: Jeyakanthan A on Feb 9, 2011 9:52 PM

  • Error while creating Billing Document in Tcode VF01

    Hi all,
    When i want to create a Billing document with single document number i'm able to move on to the overview of billing items.....for instance if 9000004568 is a document with 10 and 20 as items and when i try an create a billing document for the concern document with VF01 t-code its populating only one item in the overview of billing document screen....why is it sooo
    And most importantly when i give two documents like 9000004568 and 6700000000 in the first screen and process them to see the overview of this then it populates Information message 'Reference document 9000004568 000020 (Error during INSERT)' .This is for the second item of the corresponding document number ie item 20 and when processed with single document number it shows only one item number 10 in the preceding screen......Why this is happing...
    Thanks in Advance.

    Younis
    are you trying to create 1 single billing document?
    If yes, you need have to same payer, payment terms and invoice date.
    if you are planning to create separate billing documents, you need to make sure that "billing type" is same.
    let me know if you need more info.
    pl reward points if u find this info useful.
    thx
    ramesh

  • Error while creating billing request thr tcode DP91

    hi,
    while creating a billing request through dp91 we are getting an error mesage : "Error during material determination for sales document item 40000067/000020". i have checked the material determination for the material, but there is no material determination maitained for the material, the material here is a service material, after creating a contract we are trying to create a billing request through DP91. this is where wer are getting the error message.

    Hi,
    It looks like the DIP Processor cannot determine a material.Go you your DIP Profile and check the Material Determination settings
    Also run TCode ODP2 to check the consistency of your DIP Profile and also chk Material Origin field was not checked in the Costing tab of the material master.
    Check above and revert back.
    Regards
    Ashu

  • Error while creating Billing document

    Hi Gurus,
    Actually we are doing asset sale scenario. Asset sold from FI but for invoice and excise invoice we have to sell it from SD as well.
    So we created one material with standard material type for non valuated materials. we have created sales order and delivery but when we are doing billing system is giving the following error "Item category ZOR TAN cannot be invoiced with billing type ZF2"
    Please help me in solving this issue.
    Thank You

    Dear gverma
    Go to VTFL, select the combination of your delivery type and delivery type and see whether the item category TAN is maintained.  I feel it is missing and hence the error.
    thanks
    G. Lakshmipathi

  • No_TVTA:Error while creating billing doc.

    Hi,
    We are trying to create sales orders (Credit Momo requests) in a report with FM: SD_SALESDOCUMENT_CREATE,
    sales orders are getting created. But when tried to bill these sales order thru VF01, we are getting error log as: Exception NO_TVTA is raised in function module VIEW_KUAGV.
    With the same data when sales orders are created manually thru VA01, Billing is sucessfully done.
    Any help for this issue? Any SPRO settings to be maintained?
    Full reward points guaranteed.
    Regs,
    Agasti

    Hey,
    Just looked at the code of the function VIEW_KUAGV. It writes log for the object SDBFPD.
    Check the application log for object SDBFPD using transacion SLG1.
    Might help...
    -Kiran
    Please mark useful answers

  • Run time error while creating billing doc.

    Hi all,
    While saving a billing document I am facing runtime error every time. Can any one help me what are the possible reasons and possible solution to overcome this. Since it is on high priority, expecting response at the earliest.
    Sunanda.P

    Dear Sunanda,
    Since it is on high priority, expecting response at the earliest.
    You must get in-touch with your BASIS-Admin, for earliest resolution of the error, as he is the only one, who may find the reason and fix the same, at earliest.
    Or,
    If, you could provide System error-log, at the time of Run-time Error, then, some work arounf could be suggested.
    Otherwise, It would be like Hit-n-Trail.
    Best Regards,
    Amit
    Note: This is, what I feel and suggest, in such cases:
    [ABAP/ Runtime Error|Re: update control terminated error]

  • Error when creating billing

    Hi :
    When I using vf01 to create biling, the processing status shows incorrect, then I go to edit --> log, nothing there, then how to solve it?

    Check these two things:
    1. is there is Billing Block in Sales Order header / Line Item...
    2. Whether PGI is succesfully done? It may happen that Delivery is saved & PGI is not done yet.
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Error while posting billing documents

    Hi,
    I am trying to post billing documents for accounting , but I am getting some error related to number range.
    I have checked number range assignments, where else I can check to find out error.
    Regards
    Nidhi

    If you are getting error while creating billing document -
    Check your number range status assignment in T-Code - VN01
    If any userexit is used then check in Userexit MV60AFZZ. There could be a Z-table where the number range may not be properly defined for the Billing Type/ plsnt/etc. as per the settings.
    If Billing document is created and you get this error while posting-
    Then it would be error with the number range for Accounting Document. Pls. ask the FI person to fix this.
    If the above does not solve - pls. mention the exact error with error code.
    Thanks

  • Error while creating Inter-company billing document

    Hi All,
    Help me to solve below error while creating inter-company billing document with ref to delivery document.
    " 1190984113 000000 Company code is not defined"
    Thanks for your help.

    Hi
    Please check wheather Customer has been extended to both company codes.Also check wheather 1190984113 is a G/L account.If it is a G/L account please check wheather it has been maintained in the company code or not.If it is not maintianed then kindly maintain the G/L account and then create the Intercompany billing document
    Regards
    Srinath

  • Error while creating the sales order with billing reference

    hi alll
    i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
    cheers
    shalsa007........

    Dear SAP SD 007
    I can confidently tell that an enhancement or an user exit has been applied in your scenario
    You have to check that
    Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
    Your people has solved the standard problem by enhancement
    Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
    Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
    To solve this only your people have used userexit
    Line items and qty greyed out means definately there is some enhancement or user exit applied
    You have to check that
    Regards
    Raja

  • Create Billing Document Error

    Dear Experts,
    When i am creating billing documents VF01 with reference of delivery dcument number its getting error that is: No Billing Documents were generated. When i saw log error it's telling  Delivery type Zxvz cannot be invoiced with billing type Zxy2. Could you please suggest me where i did worng.
    Thanks in Advance!
    Anjali

    Hi
    Goto VTFL t.code and check that the corresponding to Billing type is assigned to the Delivery type or not.
    Thanks,
    Laxman Aadimulam

Maybe you are looking for