Error in creating database diagram using JDeveloper

Today I came across this weird error. I made an Identity column of type LONG and I had to create another column in same table with same data type i.e. LONG. I was surprised to see that JDeveloper did not let me create another column with type LONG. Error message was "*Invalid column Course_Parent_Id, the table already contains column Course_Id of type LONG*". Can someone guide me why this error occured and how to cater it.
Help is appreciated in advance

Isn't it a strange restriction?? If I need huge range for integral values in my database, it must have provision to do so. Anyways thanks for the reply. I have used NUMBER instead of LONG

Similar Messages

Error creating database diagram

Jdeveloper 10.1.3.04
Oracle database 9.2.0.6.0
I create a database diagram. I go to the database connection and drag a table onto the database diagram. JDeveloper asks me what I want to create. I select 'offline database object' and click 'OK'.
I get a popup that says "The following Foreign Keys were not imported because the Constraint they reference was not accessible:"
"On Tablename:
TABLE1_TABLE2_OID_FK
TABLE1_TABLE3_OID_FK"
The table gets created in the diagram, but the foreign keys don't show up.
Both foreign keys reference the same constraint, but I can't see why the constraint would not be accessible. Has anyone else seen this error message? Can someone tell me what it means?

Actually, I can drag in all the tables in the schema, and I get a number of errors. All errors are the same one I listed, but in reference to different tables and foreign keys.
The interesting thing is that all the foreign keys that are complained about reference the exact same constraint.
Yet, the table and constraint involved seem fine. I am at a loss to understand what is going on.
What else can I tell you to help with figuring this out?

Problem migrating database diagram from JDeveloper 10 to Jdeveloper 11

Hi List,
I have database diagrams created by use of JDeveloper 10 (files *.oxd_db), but (after automatic migration) they are not displayed as diafram in JDeveloper 11 (they are displayed as xml).
If I create new diagrams from JDeveloper 10 I get *.db_diagram files.
Anybody knows how to migrate JDeveloper 10 diagrams to JDeveloper 11?...
Best regards
Francesco

Hi,
>>>SAP BASIS 7.11 SWC, after importing it from the SLD
you don't import that from SLD
import it from TZP file from PI installation DVD
then it will work
Regards,
Michal Krawczyk

Error in creating database

hai i am installing sap netweaver 2004s with a IBM DB2 as database.I got an error in Create database phase.
INFO 2011-11-28 02:22:06
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DB6/CENTRAL/AS/createDatabase.clp' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DB6/CENTRAL/AS/createDatabase.2.clp'.
INFO 2011-11-28 02:22:06
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\createDatabase.clp.
INFO 2011-11-28 02:22:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DB6\CENTRAL\AS\createDatabase.clp.
ERROR 2011-11-28 02:22:07
MDB-01016 SQL0294N The container is already in use. SQLSTATE=42730
ERROR 2011-11-28 02:22:07
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateDb|ind|ind|ind|ind|16|0|CreateDatabase was executed with status ERROR
Please help me in solving this problem.....
Thanks in advance......
Dinesh.

Hello,
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR.
This Error occurs because the <SID>DATA1,<SID>DATA2,<SID>DATA3,<SID>DATA<X> and <SID>LOG1,<SID>DATA<x> are already containing the .mdf,.ndf and .ldf files.
So rename those directories to someother(Do not delete, just rename, as it might be used to attach the database incase you have detached it) and just create the above directories "<SID>DATA1,<SID>DATA2,<SID>DATA3,<SID>DATA<X> and <SID>LOG1,<SID>DATA<x>".
This should solve the problem.
Any questions, do post it back, will try to resolve it.
Many Thanks.

Error while creating database in classic appln

Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advance

Can you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine.

Oracle10g Import:ORA-01119: error in creating database

I am trying to Import a Oracle10g dump into a Oracle 10g db server(SunOS).The server has enough space and so do the tablespace.
This is the import command i'm trying:
imp db/db@sid file=file.dmp ignore=y full=y
But it still posts the following error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by OPS$QZORA, not by you
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses UTF8 character set (possible charset conversion)
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "NEW" BLOCKSIZE 8192 DATAFILE '/home/NEW01.d"
"bf' SIZE 2000M , '/home/NEW02.dbf' SIZE 3000M , '/u03/bm"
"qzdb/NEW03.dbf' SIZE 2000M , '/u03/bmqzdb/NEW04.dbf' SIZE 3000M "
" , '/home/NEW05.dbf' SIZE 2000M , '/home/NEW06.d"
"bf' SIZE 5900M , '/home/NEW07.dbf' SIZE 943718400 , '/u0"
"1/bmqzdb/NEW08.dbf' SIZE 734003200 , '/home/NEW09.dbf' SIZ"
"E 144703488 , '/home/NEW10.dbf' SIZE 144703488 , '/u01/b"
"mqzdb/NEW11.dbf' SIZE 81788928 , '/home/NEW12.dbf' SIZE 15"
"00M AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M, '/home/NEW13.dbf"
"' SIZE 1048576000 AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M EXTENT MANAG"
"EMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMENT AUTO"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file '/home/NEW01.dbf'
ORA-27040: file create error, unable to create file
SVR4 Error: 2: No such file or directory
IMP-00000: Import terminated unsuccessfully

Actually i dont want that to create any tablespaces.I have a tablespace created on my db.In fact i dont have the same (/home) path on my unix server.
I want the imp utility to ignore create tablespace command.I did give the IGNORE=Y on the imp command.
If i give fromuser,touser i can import but that does not go along with full=y.I have to do it table by table.It has also got sequences,types,synonyms etc
thanks in advance
shiva

Error when creating database

when installing 9i server i couldn't create database and after installation i tried to create database using DBCA but same errors occured.
it says null sid name error=2. and then says tns protocol problem.
what should i do?

Kim Gabrielsen (guest) wrote:
: Hi,
: I have tried to install O8 on Linux several times but all have
: failed. I follow the doc written by Tom Bissett which I find
very
: informative on this subject.
: I have the correct env setting, have created oracle user as
: member of the dba group and the install program runs nicely
until
: it starts to create the database. It stops with an error
message.
: The log files look like this (excerpts):
: CRDBORCL.LST
: ORA-06413: Connection not open.
: LCC-00161: Message 161 not found; product=SVRMGR; facility=MGR
: ORA-06413: Connection not open.
: create database "ORCL"
: ORA-03114: not connected to ORACLE
: ORA-06413: Connection not open.
: which is the same results I see if I invoke svrmgr manually
: and tries to connect as 'internal'. BTW srvmgr prompts me for a
: password even though I'm logged on as 'Oracle' which is a
member
: of DBA.
: INSTALL.LOG
: - Entering database actions section.
: - Creating initORCL.ora file
: - Creating crdb2ORCL.sql database catalog and file
creation
: script
: - ERROR: The 'CREATE DATABASE' statement for the ORCL
: database failed.
: egrep failed to find 'ORA-' error in the file:
: /u01/app/oracle/admin/ORCL/create/crdbORCL.lst
: I hope someone can help 'cause I'm stock here...
: Best regards
: Kim Gabrielsen
If you followed the instructions on setting the shared memory
parameters you may have a problem.
In the 'shmparam.h' file set SHMMAX to something smaller than 4G.
I just set mine to 2G or 0x7FFFFFFF and now it works fine.
I have done the Oracle 8.0.5 installation twice now on 2
different machines with success(1 Compaq Proliant 1500 -
RH5.2/2.0.36 kernel and 1 GW2K - RH5.2/2.2.1 kernel) I ran into
several problems along the way but all problems were solvable.
Mark
null

Insatallation error at create database statistics..

Hi all,
I am trying to install ecc6 abap+java on win 2003 sp2 and oracle 10.1
I got error at create database statistics..When i checked in brconnect.lon it says that "BR0484I BRCONNECT log file: O:\oracle\NAG\sapcheck\cebiwbzb.sta
BR0613E Database instance NAG is shut down"
But when i cross check the oracle it is working fine ..up and running..
i checked it by executing "SQL>select name,open_mode from v$database;"
out put SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ORCL READ WRITE
SQL>
I restarted the server,but stil gettng the same error...
Three days back i installed using the same dump installation was perfect without a single error.(( used oracle 10.1 without the patch )
Please help to sort out this error.Please suggest the logs that needs to checked in case of installation failure.
Thanks,
Kasperr.

Hi All,
what you are pointing is right i gave wrong sid henct the error.
How evre i am facing some diffent error,this one i am facing error at same "create database statistics' it says that particulr sid is shut down.
when tried for sqlplus "/as sysdba"----
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
Than i loged off administrator and loged in as sidadm and started up oracle it was up and runing...than i loged of and loged in as administrator ans continued the installation and it runing....
Now when i try to check the status by sqlplus "/as sysdba" it gives the same response
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
Please help how to correlate this thimg administratot and sid adm..do i need to do some modification like add sid adm to adminstrator... please let me know how this is done,,...
when i checked the task manager the oracle.exe is runing under SYSTEM user......
Thanks,
Kasperr.

Error on Create Database command for Oracle 9i on Red Hat 9

Error on Create Database command
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16
CREATE DATABASE ora9i
ERROR at line 1:
ORA-01092:ORACLE instance terminated. Disconnection forced.
initora9i.ora file contents :
background_dump_dest=$HOME/ADMIN/BDUMP
core_dump_dest=$HOME/ADMIN/CDUMP
db_name=ora9i
db_files= 80
db_file_multiblock_read_count=8
db_block_buffers=100
shared_pool_size = 3500000
log_checkpoint_interval = 10000
processes=50
parallel_max_servers=5
log_buffer = 32768
max_dump_file_size = 10240
global_name = TRUE
control_files=$HOME/ORADATA/ctrl01.ctl
undo_management=AUTO
user_dump_dest=$HOME/ADMIN/UDUMP
-------------------------------------------------

Pleae include REUSE keyword at the end of each file location as shown below...
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M REUSE,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M REUSE
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M REUSE
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16

Error while creating database manually

hi guru's i am getting error while creating database manually
my sql is SQL>create database lily
logfile group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
 group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
 group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
character set WE8ISO8859P1
national character set utf8
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
 size 50M
 autoextend on
 next 10M maxsize unlimited
 extent management local
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
 size 10M
 autoextend on
 next 10M
 maxsize unlimited
undo tablespace undo
 datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
 size 10M
default temporary tablespace temp
 tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
 size 10M;and i am getting following error
create database lily
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
code}
Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PM

create database lily
logfile group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
 group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
 group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf' size 150M
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
undo tablespace undo datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf' size 10M
default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
Edited by: rajeysh on Jul 19, 2011 6:59 PM

Error while creating resource group using non-globalzones.

Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AM

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

ORA-01119: error in creating database file

Hi,
I am trying to run scripts adcrtbsp.sql but it is giving following error.
adcrtbsp.sql script contains:
CREATE TABLESPACE
APPS_TS_TX_DATA
DATAFILE '?/dbf/transaction_table.dbf'
SIZE 1000 M REUSE
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128 K
SEGMENT SPACE MANAGEMENT AUTO ;
ALTER TABLESPACE
APPS_TS_TX_DATA
add DATAFILE
'?/dbf/transaction_table_2.dbf'
SIZE 1000 M;
ALTER TABLESPACE
APPS_TS_TX_DATA
add DATAFILE
'?/dbf/transaction_table_3.dbf'
SIZE 1000 M;
CREATE TABLESPACE
APPS_TS_TX_IDX
DATAFILE '?/dbf/transaction_index.dbf'
SIZE 1000 M REUSE
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128 K
SEGMENT SPACE MANAGEMENT AUTO ;
ALTER TABLESPACE
APPS_TS_TX_IDX
add DATAFILE
'?/dbf/transaction_index_2.dbf'
SIZE 1000 M;
sqlplus system/pwd @adcrtbsp.sql
CREATE TABLESPACE
ERROR at line 1:
ORA-01119: error in creating database file 'f:/oracle/dbf/transaction_table.dbf'
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Anybody can guide ??

Hi,
Let me explain..
You have started you session
sqlplus system/pwd @adcrtbsp.sql
Its trying to create here "'f:/oracle/dbf/transaction_table.dbf' "
Try to check the path with folder whether exists or not "/dbf"
Aman.. nice reply... !! I am late :-(
- Pavan Kumar N

How to create constellation diagram using Labwindows?

I am using the labwindows CVI 2009 version. Is it possible to create Constellation diagram using this software?

I believe you may require a Modulation Toolkit (Modulated Signal Processing for LabVIEW and LabWindows/CVI).
-Ciao

How to create ER diagrams using designer 6

Hi
pls suggest me how to create ER diagrams using designer 6.o
thanks

Hi,
You have to capture the tables into Designer Repository using Design Editor utility (Hope you have done this !), then do a 'Table to Entity Retrofit' from Entity Relationship diagrammer utility. Create a ER Diagram and include the entities.
Steps to do Entity Retrofit
1. Invoke Entity Relationship Diagrammer from Designer Front Panel.
2. Create New Diagram.
3. Invoke Utilities | Table to Entity Retrofit.
4. Click Candidate Tables button.
5. Select the tables.
6. Click Retrofit button.
7. Entities will be created in diagram.
8. Double click on the entity to see the details.
HTH,
Wilson

CAQuietExec: Error: Cannot create database.

Could not upgrade from Azure .NET SDK 2.2 to 2.3 (VS 2013) on Windows 8.1 x64. The Storage Emulator 3.0 setup is failing, even if launched manually. Do you have any tips?
The logs of the WindowsAzureStorageEmulator install has the following lines just before initiating a rollback.
MSI (s) (F4:D8) [08:18:27:340]: Source for file 'StartStorageEmulator.cmd' is compressed
InstallFiles: File: StartStorageEmulator.cmd, Directory: C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator\, Size: 64
MSI (s) (F4:D8) [08:18:27:340]: Executing op: CacheSizeFlush(,)
MSI (s) (F4:D8) [08:18:27:340]: Executing op: ActionStart(Name=RunInitialize,Description=Initializing the Storage Emulator,)
Action 8:18:27: RunInitialize. Initializing the Storage Emulator
MSI (s) (F4:D8) [08:18:27:340]: Executing op: CustomActionSchedule(Action=RunInitialize,ActionType=1025,Source=BinaryData,Target=CAQuietExec,CustomActionData="C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator\WAStorageEmulator.exe"
init -forcecreate -autodetect)
MSI (s) (F4:F8) [08:18:27:371]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIEAC9.tmp, Entrypoint: CAQuietExec
MSI (s) (F4:C8) [08:18:27:371]: Generating random cookie.
MSI (s) (F4:C8) [08:18:27:371]: Created Custom Action Server with PID 3640 (0xE38).
MSI (s) (F4:48) [08:18:27:387]: Running as a service.
MSI (s) (F4:48) [08:18:27:387]: Hello, I'm your 32bit Impersonated custom action server.
CAQuietExec: Windows Azure Storage Emulator 3.0.0.0 command line tool
CAQuietExec: Error: Cannot create database.
CAQuietExec: Error 0xfffffff3: Command line returned an error.
CAQuietExec: Error 0xfffffff3: CAQuietExec Failed
CustomAction RunInitialize returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 8:18:32: InstallFinalize. Return value 3.
MSI (s) (F4:D8) [08:18:32:276]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (F4:D8) [08:18:32:276]: User policy value 'DisableRollback' is 0

I agree. This (finally) took care of it! Thanks to DixQuinze and Trent Swanson...
sqllocaldb stop v11.0
sqllocaldb delete v11.0
delete C:\Users\MyAccount\WAStorageEmulatorDb30*.*
sqllocaldb create v11.0
Then try the install again!
-Dave
DixQuinze
0

Error in creating database diagram using JDeveloper

Similar Messages

Maybe you are looking for