Error in creating delivery for STO

Hi SAP Gurus !!
I have these errors while trying to create delivery for a Stock Transport Order between 2 plants using transaction "VL10F"
APO: Check instructions YA / BE does not exist for loca tion product PFSIND_SM_TEST_FCO / 2383
APO: Check mode YA and business event BE not defined                                         
APO: Internal error: Item $ 1/000001                                                         
Only 0,00 PC of material PFSIND_SM_TEST_FCO available                                        
An item with no delivery quantity is not permitted. Item will be deleted.                    
I have chcked that there is sufficient stock available at the storage location level in the supplying plant.
Can you please help me out of this please......

Dear,
        Please try to check whether some STO is still pending for do complete process. If there is any pending STO then stock is block for this material.
Regards,
Sandip Shaktavat

Similar Messages

  • Error while creating delivery for STO using VL10G or VL10B

    Hi all,
    I am working on stock transport order scenario & stuck because of a problem:
    The purchase order has been created using transaction code ME21N & saved. Now when i go to transaction code VL10B or VL10G to create a delivery i get an error when i click on the "background" button. The error is as follows:
    Errors occurred while processing output
    Message no. VN073
    Please suggest me where the problem lies & what do i do in order to eliminate thia problem.
    Thans in advance.
    Regards,
    Allabaqsh G. Patil

    hi,
    you have done STO. then afterwards the process is
    1. goto VL10B and dont change the date, then give the STO number in "Purchase Orders" tab and then click on execute button.
    2. then select the line item and click on Background.
    3. then two line items will come in which one is in green colour and another is in yellow colour.
    4. select the green line item click the " log delivery item"
    5. finally click on "documents"
    then the system will give the outbound delivery.
    after that remaining process is same
    if it is helpful then give the points.
    Regards,
    SOMU.

  • Error while creating Delivery for STO

    Deal Gurus,
    Require your help .
    We are doing an STO.The steps followed were
    1) Created Purchase order (ME27) on the Day 1
    At the time of creation of STO, there was no stock present in the Storage location at the supplying plant that would be used in the delivery document. This Storage location is automatically picked in the Delivery document.
    2) On the Day 2 the stock was moved into the required storage location.
    3) On Day 3 the delivery date in PO was changed.
    4) Again on Day 3 while generating the Delivery due list with reference to the PO the following error occurs.
    Only 0 EA of materials abcdefg Available.*
    Even at creation of PO the same warning appears but allows to save the PO document.
    This is even after there was sufficient stock was present on desired date in MMBE.
    Please reply with your suggestion or queries regarding any clarifications.
    Thanks
    Dany

    Dear Dany,
    This happens if you do not have tax field in your material master record in sales org 1 tab. To activate this you have to assign tax condition type to your country. You can achive this by going to SPRO>> IMG>> SD>> Basic Functions>> Tax classifications
    Once you do this setting then you have to go to material master record and have to assign tax classifications. Then run a fresh test cycle ...
    Best Regards
    MBS

  • VL10B - Creates delivery for STO after delivery date

    Hi All,
    VL10B batch job is scheduled to create delivery for STO automatically when stock is available (availability check 02).
    batch job creates late delivery though sufficient stock exist
    For ex. STO is created on 27 Aug 14 having delivery date 31 Aug 14. (STO is having only one line)
    VL10B batch job having delivery date as <= current date + 1.
    logically batch job should create delivery on 30 Aug 14 but in my case it is created on 07 Sep 14.
    Please help me to understand the cause of this.
    Appreciate quick response
    Regards,
    Anil Patel

    Hi Anil
    See note
    1245447 - Avail. check for deliveries that are created automatically
    "After you implement the corrections, the availability check is only deactivated when you create the delivery automatically. If you make changes to the delivery afterwards, the system runs the availability check.
    The availability check is deactivated for the automatic creation of deliveries for technical reasons."

  • Unable to create delivery for STO between different stroage locations

    Hi,
    i created PO for STO between differen storage locations belonging to the same plant.
                 At the time creating PO iam getting warning message " Of material RM-999999, only 0 KG are available on desired     
                 date". what could be the reason?
    when iam doing vl10b, PO is displaying but when iam selecting the PO line and clicking on the background button it is not generating any delivery document number and it is not showing any errors?
    can any one help on this.

    Hi Praveen,
    While executing VL10B, you are actually planning to create outbound delivery for STO PO.
    The STO PO will be due for delivery on that date and hence PO is displayed in the transaction.
    The error message specified by you means on the due date of delivery, there is no material quantity exists at supplying storage location. This could be because no quantity exists in storage location or there could be some reservations available for available quantity or some other quantity is booked under some other outbound delivery document on or before that date.
    Check for stock on posting date via t-code MB5B and proceed accordingly.
    Hope this resolves your problem.
    -Ravi

  • Error while creating delivery for STPO

    Dear ALL,
    I am facing the following error while creating delivery based on the purchase order.
    """"Essential transfer parameters are missing in record""""
    Pls help me how can I proceed further.
    RGds
    Babu

    Hi
    What is the document type for the purchase order ? It seems that we may take wrong PO number in delivery creation

  • Error While creating Delivery For  AAK

    Hi experts ,
    I am creating Delivery for AAK in sap but i m getting error as
    ERROR:::--
    A delivery of type Installation/Upgrade already
    exists for component KAARTECH (version 400_700)
    We have already created the delivery but we couldn use the old one. so i m creating new delivery but it throws an error like .
    Kindly help me proceed after this..
    I just want to create a new delivery and proceed in this AAK.in old delivery i am facing few errors so i m creating new delivery , but its unable to create .
    Regards,
    Ajay.
    Edited by: ajayshyam on Jan 27, 2011 8:54 AM

    Hi,
    Do you have any steps to follow AAK.
    We have lots of TOC's delivered to different client.
    Now i have to install AAK and start delivering the files through AAK.
    I dont know how to start. I registered a TOC. Next what ?
    Can you share some information on how to start working with AAK.
    Regards
    Kuna

  • Create delivery for STO line item

    Hi All,
    My requirement is to allow creating delivery for Stock transfer Order(STO) line items which are
    not in blocked status even though some line items are in blocked status.
    Right now the logic checks if entire PO is in blocked Status using FM-- /SAPSLL/CD_STATUS_GET in method CHANGE_DELIVERY_ITEM of interface IF_EX_LE_SHP_DELIVERY_PROC
    But this FM does not contain PO item parameters. I need to incorporate item level checking logic.
    Are there any SAP notes available to fix this problem?

    Hi All,
    Any clues on this?

  • Alternative way to create delivery for STO

    Hi all,
    Is there an alternative way to create a delivery for STO aside from going to tcode VL04?
    Thanks!

    >
    AA wrote:
    > Hi
    > You may try VL10B.
    >
    > Regards
    > Amitesh Anand
    Hi,
    Thanks for the info.
    Can you give some overview on how to use it?
    Thanks!

  • Shipping point error while creating delivery for subcontracting order

    Hi,
    I am trying to send Materials Provided to a Subcontractor via an SD Delivery using std SAP functionality using IDES preconfigured system.
    In transaction ME2O, while creating delivery, i am facing following error:
    Essential transfer parameters are missing in record:  000002
    The dignosis gives following details.
    Diagnosis
    Information necessary for this delivery is missing.
    Please help to sort out the problem.
    Regards
    SAmeer

    Hi Sameer
    please check OSS notes 102104 for detail help about this error.
    regards
    Srinivas

  • Create delivery for STO forcibly

    Hi All,
    I have to create a delivery for one STO. Currently system has got stock, but it is allocated to some other orders. System is confirming this in future. I am getting the committed date in future. I still want to create delivery forecibly for this PO right now.
    How would i do it?
    Sachin

    Pls do "Rescheduling" for the sales orders.
    Rgds
    Sumanth.G
    Consultant/Systems Analyst- SAP SD/MM

  • Error: creating Delivery for STO PO:Document is incomplete: You cannot save

    Dear Gurus,
    I,m  carrying out STO between two plants with in same company code.I have ctreated STO-PO(doc type UB)
    When proceed for delivery using VL10B the following error is creeping in:"Document is incomplete: You cannot save the delivery"
    The technical data provides the following info
    When the system checked whether saving delivery was
    permitted, it determined that the requirements stored in
    Define Incompletion Procedures for this document do not
    allow this subsequent function.
    Message number :VU 013
    Any body has an idea how to proceed i have already all the settings related SD.
    Regards
    Praveen

    Hello Praveen Kumar
    Please check the below Note
    Note 335504 - Not possible to save delivery because of VU013
    Hope this helps
    Thanks
    Arshad

  • Error when creating delivery referenced by STO doc. from vl10b

    Hi All,
    We are getting an error when creating delivery as background from vl10b t-code referenced by STO. The error message " Global official numbering: Input parameter incomplete " .
    Please give me a hand for this problem.
    Thanks in advance for your helps.
    Regards,

    Hi,
    One of the possibilities of the error could be
    if i_BuKrs eq space or i_BuPla eq space or i_PostDate eq space.
    i.e Compnay code or Posting date ro Business Place is Blank.
    Please Take help of ABAPEr to resolve the isssue
    Thanks
    Murtuza

  • Is it possible to create an inbound delivery for STO in a 2 step process ?

    Hi Experts,
    Is it possible to create an inbound delivery for STO in general (how do I get a vendor for a Plant. I have already assigned a plant to my vendor in vendor master - additional purchasing data, but it does not seem to work).
    In particular if I want to create an inbound delivery in intra-company plant STO scenario, how do i do it?
    Let me know in case if that is not possible.
    Thanks,
    Nitin

    Hi Tao,
    I did that also, but it did not work.
    Finally I had to debug, and found that the for the document type UB (intra-company transfer) i should make the customizing setting which makes the vendor data to be considered. (Table T161).
    Anyways, thanks for your help.
    Regards,
    Nitin

  • Which trasaction we use for creating delivery againest STO?

    Hi
    I need to know which trasaction we use for creating delivery againest STO with 641 movement type?
    Please provide the complete steps of this process.

    Hi,
        Try it in VL10B for creating p.o delivery in background....
    From sas....

Maybe you are looking for