Error in creating delivery with VL10B for STO

Hi Gurus,
I have created an Stock Transport Order with material A. I have inputted all the header data, supplying plant, receiving plant and location.
But, when i process this STO in VL10B to create delivery document, system is givign an error message that there is no stock available to dispatch.
When we check through MB52, MMBE stock is avaialble but, system is reading zero stock.
We have also checked in MD04, material qty is assigned to the order which we have created. And there is no other order or delivery for this material.
We have also raised an OSS message, suggested to go for rescheduling or Back order processing through CO06 or V_V2 respectively.
Since there is no other order been assigned to this material, there is no question of going for either rescheduling or Back order processing.
This error is coming in Production client and this is the first time we are getting this error.
Request you to please suggest any process to rectify this issue.
Regards,
Praveen.

Hi
for ths forst you can check the purchase order and then you can find the avaliabillity check in releted to that po and then chek it will trigger or not other wise check in
VL10F THEN  you can find the exact error for this
regards
s.pavan

Similar Messages

  • Error while creating delivery with reference to STO

    Hi,
    I am getting the following error while creating the delivery with reference to STO
    Document is incomplete: You cannot save the delivery
    Diagnosis:
    When the system checked whether saving delivery was
    permitted, it determined that the requirements stored in
    Define Incompletion Procedures for this document do not
    allow this subsequent function.
    I have checked the following already:
    1. Maintained shipping data for both the supplying and receiving plants.
    2. Shipping tab exists in the PO
    3. Shipping point determination is checked.
    4. Customer masters created for both supplying plants and receiving plant for the sales area created for STO
    5. Material master is available in both receiving and supplying plants.
    It is working fine in one client. and giving a problem only in the other.not able to figure out where the error is. appreciate your suggestions
    regards
    joe

    Hi Joseph,
                     First go to transaction "VUA4" and see what is the incompletion procedure asigned to your delivery type. Then go to
    "OVA2" and see what are the fileds maintained in incompletion procedure of the delivery type and the status groups assigned to them. Now you go to "OVA0(ZERO) and see whether the status group allows to save the delivery. If it doesn't you can untick that check box. But if this is a live system , i doubt if you would be bale to do that. Any way one of the possible causes is storgae location missing. Kindly pelase let me know If you need any more infromation on this.
    Regards,
    Ram Pedarla

  • Unable to create delivery with reference to STO

    Hi,
    Facing this error while creating del with ref to the STO.
    Configured the following:
    maintained shipping data for both receiving and supplying plants
    shipping point dertermination
    material extended to the sales area
    Document is incomplete: You cannot save the delivery
    When the system checked whether saving delivery was permitted, it determined that the requirements stored in Define Incompletion Procedures for this document do not allow this subsequent function.
    Please suggest
    regards
    Joseph

    Hi,
    Please check for master data - Vendor master of supplying plant for receving plants purchasing organisation and also supplying plant in additional data in purchasing tab in vendor master
    Customer master for supplier's sales organisation
    Check if shipping point, ship to party / customer, delivery type picked in sto properly
    Check for the STO set up in SPRO
    Delivery type assignment for supplying plant
    if everything is ok, Create delivery in VL10B for sto, if it errors, check for log clicking on log icon
    give error description
    Regds

  • Error while creating inter-company invoice  for stock transport

    Hi ,
    I am facing following errors while creating inter-company invoice for STO order.
    We have scenario where standard PO is created in  company code A  & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
    In replenishment delivery we have 10 line items. But  when we try to do inter company invoice through VF01/VF04 we get following log
    XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
    XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
    XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
    With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
    I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
    If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
    Thanks & kind regards,
    Ganesh Palatshaha

    Hello
    Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
    If that is note the case the refer following link:
    - Error VF 047 & 048 while creating Inter company billing
    Regards
    JP

  • Error when creating delivery referenced by STO doc. from vl10b

    Hi All,
    We are getting an error when creating delivery as background from vl10b t-code referenced by STO. The error message " Global official numbering: Input parameter incomplete " .
    Please give me a hand for this problem.
    Thanks in advance for your helps.
    Regards,

    Hi,
    One of the possibilities of the error could be
    if i_BuKrs eq space or i_BuPla eq space or i_PostDate eq space.
    i.e Compnay code or Posting date ro Business Place is Blank.
    Please Take help of ABAPEr to resolve the isssue
    Thanks
    Murtuza

  • Create outbound delivery using VL10B for Stock Tranfer order

    Hi ALL gurus,
    I had created STO stock transfer order (UB order type ) and release the STO using ME21N and ME29N
    When try create a outbound delivery using VL10B, the STO not show, i remove all check and blank in all seclection. The STO still not show.
    Anyone can help ?? where going wrong ???
    Rejoice

    Hi
    There are two processes for STO , that is with shipping & without shipping.
    For Without Shipping there is no config required.
    For STO with shipping You need to configure in
    SPRO-> IMG-> Materials Management-> Purchasing-> Purchase Order-> Set up Stock Transport Order
    Please go through the link on all types fo STO's
    http://help.sap.com/saphelp_erp2004/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/content.htm
    Thanks & Regards
    Kishore
    Edited by: Kishore Kumar Chiluka on Jul 2, 2008 8:25 AM

  • Delivery Qty Zero for STO with 2 line item

    Hi Guys,
    I have a problem when create delivery for STO with 2 line item which contain material with BOM. I have create delivery with tcode VL10G refer to Purchase Order and Delivery successfully created, but delivery qty was zero or empty. I try to fill the dlv qty same with STO Qty but  popup message "Only 0 PC for the material available", I have check the stock and there is a stock exist for the material.
    I need help for this problem.
    Regards
    Gunawan

    Hi,
    Please check if inbound delivery is already created for that Qty
    Thanks
    Diwakar

  • There's an error while delivery note creation for STO order

    There's an error while delivery note creation for STO order  even stock available in unrestricted stock
    Edited by: sharma aman on Nov 8, 2011 9:00 AM

    Dear Sharma Aman,
    Check whether the following link helps you.
    Mesaage : while creation of delivery : An item with no delivery quantity .)
    Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
    In that case , you need not wait for the solution as it is already available.
    If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
    Try to search in the forum or in google before posting further queries
    Thanks & Regards,
    Hegal K Charles

  • Error while creating delivery for STPO

    Dear ALL,
    I am facing the following error while creating delivery based on the purchase order.
    """"Essential transfer parameters are missing in record""""
    Pls help me how can I proceed further.
    RGds
    Babu

    Hi
    What is the document type for the purchase order ? It seems that we may take wrong PO number in delivery creation

  • Error when creating VLO1N: u201Corder blocked for delivery as a result of credi

    Error when creating VLO1N: u201Corder blocked for delivery as a result of credit checku201D.
    Observations @ FD33:
    Credit limit     :     3,50,000.00
    Receivables     :     1,53,903.94
    Credit exposure:     1,55,185.17
    Current sales order value:
    Net: 43127.74
    Tax: 7331.72
    Total sales order value : 50,459.46
    Sales order created on :  18/8/09
    Horizon                      :  2/9/09
    Risk Category                :  HRR (High Risk Re-check)
    ====================
    Need to know:
    Tax amount is also included in the credit check?
    Is the total sales order value: 50,459.46 is included in the Credit exposure value?
    If it is not included then the total will go beyond the Credit limit value. Fine the block is ok.
    If it is included in the Credit exposure, then the total amount will be 3,09,089.1. Which is less than 3,50,000. So credit check should not happen.
    But it is blocked and the error is through as u201Corder blocked for delivery as a result of credit checku201D.
    Please let me know the reason & what other checks I have to look on.
    So that I can provide the reason for this action.
    Thanks in advanceu2026

    Hi,
    Generally total value of the sales order is considered for the Credit management.
    Now if you want tax should not be included for the credit management.
    Then you have to make small changes in pricing procedure.
    Go to V/08 and select your pricing procedure and go to control data.
    Check out the setting where your grand total is happening.
    In the subtotal column you will find out A has been put up.
    This A trigger the credit exposure of the credit management.
    So if you want that tax should not be included then, check out where your total net value has been calculated before tax.
    Over there put the A in the sub total column and remove it from the previous setting.
    Save this setting now check whether the credit is happening including the tax or not.
    Regards
    Raj.

  • Error in creating delivery document from stock transport order

    hi sd gurus plz help i m nt able to create delivery in vl10b from stock transport order me21n after giving shipping point and  po number also. can u help me out and can u tell me how to maintain copy control from stock tarnsport to delivery docu.

    Hi Debesh,
    The settings for Delivery type for STO is maintained using the following path:
    Materials Management>Purchasing>Purchase Order>Set up Stock Transport Order>Assign Delivery Type and Checking Rule . Here you assign the Delivery type to Stock Transport order (with reference of Suplying Plant)
    For creation of STO for delivery creation use T-code- VL04. Enter the Relevant Shipping Point and the Delivery Creation Date. Also tick mark the option Purchase order. If you already have a Purchase order enter the no.
    System will show the details of the STO here by using the Main Menu > Delivery> Create Deliveries you can create the Delivery against the STO. Then by using the VL02n option you can do the Picking / PGI for the Delivery.
    Hope the above helps you.
    REWARD if it helps you!!
    Regards,
    Ajinkya

  • Problem in creating delivery through VL10B

    Hi,
    While creating delivery through VL10B, i am getting error -
    An item with no delivery quantity is not permitted. Item will be deleted.
    What should be error???
    Ref. My previous Thread..
    Re: Problem in creating delivery through VL10B
    Regards...

    In MMBE transaction, there is sufficient stock.
    Please clear, if this will be allocated to other outbound deliveries..then any problem... How can I check this, that it is allocated to other outbound deliveries.
    How can we it found under the stock "Schedule for delivery"..
    Regards..

  • Error while creating delivery docuemnt

    Hello Friends,
    I have scenario of scrap sale, i have created metal sheets as a scrap material & created a sales order
    now while creating delivery with VL01N i am getting following error:
    Copying is not poss.because an entry is missing in Table TVCPL: ZOR ZLF &
    Copying is not poss.because an entry is missing in Table TVCPL: ZLF ZOR TAW
    Please guide me how can i proceed in this aspect.
    Thanking you in anticipation.
    Best Regards!
    Sadanand

    Dear Sadanand
    While creating your new order type in VOV8 itself (in your case ZOR copied fron OR) there will be a dialogue box from the system is this entry relevent for copy controls
    Have you given no there?
    Similarly While creating your new delivery type in OVLK  itself (in your case ZLF copied fron LF) there will be a dialogue box from the system is this entry relevent for copy controls
    It looks like you have said a no there
    Please delete your ZOR from VOV8 and log out of SAP and relog after 1 minute copy all relevent settings correctly
    While creating order type itself if you mention that this is relevent for copy controls  there is no need to go to VTLA at all automatic updation in VTLA will happen for your new order types
    This will help you
    Regards
    Raja

  • Error in Creating Delivery (Returns)

    Hi SAP Experts,
    We have a Returns Order having materials with quantities greater than zero and materials with qty as zero.
    When we try to Deliver this Order in Create Deliver Transaction -VL01N, giving appriopriate Delivery Dates,
    while Saving it throws the Error - "Document is incomplete. You cannot save the Delivery".
    There is NO Incompletion log in Delivery. Error logs Contains only Information Messages -
    "  item 10 , material staging date 4/7/2010 replaced by current date 
      Outbound Delivery is on back order (check shipping deadline).".
    We have kept the Selection date while Delivery Creation as 4/7/2010 beacuse requested Delivery date in the Order is 4/7/2010.
    and other dates  too are kept the same .
    All scheduled Lines for the Delivery are confirmed.
    Could you tell why the Delivery is not being Saved ?
    Appreciating your quick response.
    Thanks and Regards,
    Umesh Karane.

    First check what movement type is assigned for this return sales process.  Next try to execute via VL10A or VL10C and post here your update.  Also I am not sure, why system is showing
    Error in creating post goods issue
    for returns?  Ideally, it should have been post goods receipt.  Check in Service Marketplace whether any note is there for this error message number.
    G. Lakshmipathi

  • Error in creating IO file handles for job (number 3152513)

    Hi All -
    I am using Tidal 5.3.1.307. And the Windows agent that is running these jobs is at 3.0.2.05.
    Basically the error in the subject was received when starting a particular job once it was cancelled and a couple of other different jobs a few days before. These jobs have run successfully in the past.
    This particular job was running for 500+ minutes when it should run at an estimated 40 minutes. At that time it would not allow for a re-start of the job, it just stayed in a launched status.
    Trying to figure out what causes this error.
    Error in creating IO file handles for job 3152513
    Note - from that being said we were to see 2 instances of this process running at the same time, we noticed some blocking on the DB side of things.
    Trying to figure out if this is a known tidal issue or a coding issue or both.
    Another side note, after cancelling the 2nd rerun attempt the following error was encountered: Error activating job, Duplicate.
    When we did receive the Error creating IO file, the job did actually restart, but Tidal actually lost hooks into it and the query was still running as an orphan on the db server.
    Thanks All!

    The server to reboot is the agent server.  You can try stopping the agent and then manually deleting the file.  That may work.  When the agent is running the agent process may keep the file locked, so rebooting may not be sufficient.
    The numerical folders are found as sub-directories off of the services directory I mentioned.  I think the numbers correspond to the job type, so one number corresponds to standard jobs, another to FTP jobs.  I'd just look in the numbered directories until you find a filename matching the job number.
    The extensions don't really matter since you will want to delete all files that match your job number.  There should only be one or two files that you need to delete and they should all be in the same numbered sub-directory.
    As to the root cause of the problem, I can't really say since it doesn't happen very often.  My recollection is that it is either caused by a job blowing up spectacularly (e.g. a memory leak in the program being launched by Tidal) or someone doing something atypical with the client.

Maybe you are looking for